REPAIRS AND CLEANING OF SEWAGE LINES, SEPTIC TANK, PLINTH PROTECTIONS, APPROACH PATH, HARDSTANDING, CHAIN LINK FENCING AT ME LINES AND 29 FAD UNDER AGE BR (EAST) AT GE DEHU ROAD

Amount

Dismantling / taking down AC waste/vent pipes fixed to walls with all fittings/ accessories 100 mm dia pipes.

Demolition & breaking up drain pipe (salt glazed , AC or reinforced concrete) set in cement mortar for 150 mm dia pipes.

All as item No.2 above but for internal dia of pipe 200mm.

Demolition of brick work built in cement mortar including all arches, pillars all quoins etc complete all as directed.

M & L for excavation in trenches n exc 1.5M deep & exc. 1.5M wide and getting out in soft/loose soil

Demolition of cement concrete (reinforced) as in manholes cover.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean redious built in CM 1:6

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface incl mixing of water proofing compound finished even & smooth with using extra cement. (Note: WPC shall be measured & paid seperately)

M&L for rendering 15mm thick in CM 1:6 other than fair faces of brick work finished even & fair using extra cement complete all as directed.

Supply only integral water proofing compound.

S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls, or laid in trenches bore of pipe 110 mm.

S&F.110 mm dia PVC (SWR) bends, any radius with access door

S&F 110 mm dia PVC (SWR) branch piece (Single Y) equal or unequal.

S&F 110 mm dia PVC (SWR) branch piece double, (Single Y) equal or unequal.

S&F 110 mm dia PVC (SWR) vent cowl

M&L for reinforced cement concrete pipes class NP-3 , laid in trenches & jointed complete with collars, dia of pipe 150 mm .

All as item No 16 above but for 200 mm internal dia of pipe.

M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in bed to drain pipes, incl packing under & hauching against the sides of pipes after they are laid and tested for 150 mm bore RCC pipe.

All as item No 18 above but for 200 mm dia RCC pipe.

M&L for cutting into existing manholes for connecting new drains making good to pipe & rendering, cutting. Out existing benching for & forming branch channel in cement concrete 1:2:4 type B-1 smooth finishing & reforming benchine as required for bore of pipe 150 mm.

All as per item No 20 above but for bore of pipe 200 mm .

M&L for 75 mm thick precast Cement concrete cover slabs 1:2:4 Type B-1 set and jointed in CM 1:6 Note:- Reinforcement shall be measured and paid separately.

M&L for mild steel TMT bars 6 to 8mm dia cut to length, bent to shape required incl cranking, bending, hooking ends & binding with & incl mild steel wire (annealed) not less than 0.9 mm dia using for manhole cover/ slabs etc.

S & F in repair for CI nahani trap/floor trap incl jointing to waste pipe fixed in cement concrete 1:2:4 (Type B-2), 75mm diameter with gratings incl taking down old broken traps.

M&L for PCC type B-1, (1:2:4, using 20mm graded stone aggregate) as in sunken floor incl water proofing liquid @ 200ml per 50Kg cement. (water proofing liquid to be measured separately) finished even and smooth.

M&L for integral water proofing liquid @ 0.30 ltr per Sqm using water proofing compound for plaster & concrete using pidi proof for LW for sunken portion of toilets in plastering vertical surfaces & concreting at the bottom of sunken floor. Make: Dr Fixit, Pidilite.

M & L for polymer modified bituminous elastomanic water proof coating @ 0.60 Kg per Sqm in two layers for sunken portion of toilet Make: Dr Fixit, Pidilite

M&L rendering 15 mm thick in cm 1:4 in sunken portion on Brick / stone masonery surfaces, incl water proofing liquid @ 200ml per 50Kg cement. ((water proofing liquid to be measured separately) including finished even and smooth.

M&L for PCC type C-2, (1:3:6, using 40mm graded stone aggregate) complete all as specified and as directed by Engr-in-charge.

S/F 40 mm dia PVC pipe (out from sunken portion) for spout.

S&F vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistem & fush pipe fixed in repairs incl "P" or "S" trap.

S&F in repairs Vitreous China wash down water closet pan with seat cover (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete.

Supply and fix hume pipe septic tank 50 users capacity including all excavation earth work required and demolition and removal of old septic tank (any size) and removal of debris,including vent pipe,cowl,rcc covers,plasters and connecting the new septic tank to the incoming sewer lines and connected to soak pit as directed.

All as per item No. 33 above but 25 users -do-

Taking down chowkats not exc 1.5 Sqm each with shutter (Without taking off shutters from the frame) complete all as specified and as directed.

Taking down shutter of any description exc. 1 sqm but not exc 2 Sqm each complete all as specified and directed.

Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5 mm thich PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing.

Factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC 'C'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.

S&F 150mm long Aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150mm long Aluminium handles cast type anodised complete all as specified and as directed.

S&F Stainless steel butt hinges 100mm long complete all as specified and as directed.

S/F 30 mm thk flush shutter solid core construction with block board core and plywood face panels commercial type on both sides

Dismantling floor hearth or wall tiling incl cement mortar bedding but not backing, complete al as specified.

M&L for Non-skid coloured Ceramic tiles of size 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over and including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified.

M&L for Glazed ceramic tiles 350mm x 250mm x 7mm or 450mmX300mmX7mm thick (square/rectangular) of approved colour on vertical surface, set and jointed in neat cement slurry and pointed with coloured cement to match the tile colour over 10mm thick rendering in CM (1:4) for wall.

M&L for vitrified coloured tiles 10mm th (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm th screed bed in CM 1:6 complete all as specified and directed.

All as per item No 46 but on skirting over 10 mm th rendering in CM 1:4 complete all as specified and directed.

Returning filling in including levelling , watering and well ramming in layers n exc 25 cm thick in soil.

Removal of surplus soil to a distance n exc. 50 M & depositing where directed at a level n exc. 1.5 M above starting point.

Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified.

M & L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in sub base for hard standing etc.complete all as specified and directed.

M & L for Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less completed all as specified

M&L 40 mm thick P.C.C 1:2:4 type B-1 using 20 mm graded aggregate in surface finish

M&L for laying machine pressed precast concrete interlocking reflective coloured (glossy finish)pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 30mm thick sand layer watering and ramming all as specified.

M& L Chequared Cement Concrete rubber moulded(glossy finish) Tiles 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over screed bed 15 mm thk in cm 1:6 .complete all as specified.

M&L for cement conceret 1:3:6 Type C-2 Using 40 mm graded stone aggregate as in surface channel and drain bed.

Extra for forming fair finished drain or channel 30 cm inner girth or above in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.

Dismantling Plain or corrugated steel (corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and directed.

S & F 0.5mm thick corrugated pre painted / coloured galvalume sheet in roofing fixing all as per manufactures instructions with all fittings and accessories etc complete.

All as per item No.59 above above but plain sheet fix in valley gutter / ridge/ view cutter

Dismantling wrought iron or mild steel work of any description not otherwise provided for .

S&F Rolled Sections or angle sections, hollow sections as in main croos beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A) etc. complete all as specified and directed.

M &L for MS work as in wind tie or any other work incl cutting, drilling holes etc.

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer.

S & F Vitreous china squatting plate urinal, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.

S&F as in repairs PVC low/high level flushing cistern white 10 ltrs capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl bracats fixed in repairs all as directed. Note Removing existing fluhing system of CI or any other quality incl brackets all as specified and as directed.

S/F Vitreous china wash basin white flat back size 580 x 450mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand alongwith 32mm dia CP waste coupling and PVC waste pipe in repairs complete all as directed.

S&F in repair pillar taps fancy type cast copper alloy, half threaded with heads, chromium plated, screwed down high pressure , with or without lettered HOT or Cold with long screwed shanks and fly nuts , srewed for iron pipe and fixed 15 mm dia of pipe all as specified.

Supply and fixing for vitreous china european dual type one piece type water closet with flushing cistern of size 780x375x700 mm star white over and including fittings such as s' trap distance pieces 100 mm long etc comple make : Hindware cat part No 92071 or equivalent all as specified and approved Accepting officer.

M&L for PCC type B1(1:2:4, using 20mm graded stone aggregate) as in bed blocks/coping/ edging all as specified and directed.

Dismanteling fencing wire mesh , any type

Dismanteling post, struts , (wood , steel or Rcc) any section incl. taking out embede portion in concrete or brickwork and making disturbed portion good

Excavation in post holes or similer holes each nexc. 0.5 cum getting out returning filling in and ramming earth around in layers n. exc 25 cm,watering , and removing surplus soils to a distence nexc 50m and making good surface in hard/dense soils,complete all as specified.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate ) as in foundation concrete for fencing post.

S&F angle iron fencing post and struts including cutting tops to shape as directed, drilling holes, notching for wire etc , flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-0 or Fe 310-0 any size.

S&F MS Screw bolts ( machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length exc. 5 cm but not exc 10 cm long 11 to 15mm dia of shank.

Supply only chain link MS galvanised fencing incl line wire 100x100mm mesh (12 gauge) size and any type of strands, rails, straining bolts etc incle provn of binding wire all complete

Supply only chain link MS galvanised fencing incl line wire 50x50mm mesh (12 gauge) size and any type of strands, rails, straining bolts etc incle provn of binding wire all complete

Fixing only chain link fencing any mesh, size and type to any type of standards, rails, straining bolts etc incl provn of binding wire

M&L for round bars 10mm dia and over cut to length bent to shape required incl cranking, bending spirally for hoping for columns, hooking ends and binding with and incl MS Wire (annealed) not less than 0.9mm dia or securing with clips.

S&F GI two strand, steel barbed wire 2.24mm dia, narbed with 2mm dia barbs @ 75mm spacing and straining and fixing to any type of standard rail, straining bolts, inlc securing or tying at crossing with and provn of galvanised mild steel wire staples or steel pins etc. All as specified (Each line of wire to be measured.)

M&L two coats of synthetic enamel paint to new steel surfaces over a coat of red oxide primer surfaces of any description exc 10 cm in witdth or girth

M&L preparing new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer surface area not exc. 10cm in width or girth

Attending day to day complaint of different type sewage work such as blockage of WHB, WC,urinals, Sink, Bottle trap, Floor trap, Nahani trap, 'P' or 'S' traps of WCs, gully trap, vertical CI pipes of any dia including juction holes of any description of various units area, Single living Accn, JCOs ORs Md Accn, Offrs Md Accn and any other Accn of AGE B/R East area, repairing of CI pipes joints (lead,cement joints) cleaning of sewage line, manholes of anynsize and depth and making it fully functional and removal of sludge / mud out side of Cantt area, excluding sunday and holiday by employing following manpower, to entire satisfaction of Engr-in-charge with following requirement / condition, complete all as directed. Note:- 1. The contractor will have to employ minimum 02 nos labour / mazdoor every day excluding Sunday and holiday to attend day to day sewer complaints. 2. The cost of items like nails screws,hexa blades, washers, plugs, cement, gasket, lead, jute, packing material, bamboo sticks, etc shall be deemed to be inclusive in the quoted rates only. 3. The timing of shifts (s) will be decided by the Engr-in-Charge as per ground requirements in consultation with user, acccordingly, the manpower will be deployed by the contractor for each shift(s). No claim(s). No contractor on this ground will be entertained at any stage. In case of any difference of opinion between Engineer-in-charge and the Contractor in this regards,the decision of the Accepting officer shall be final,conclusive and binding. 4. All the complaint(s) will be addressed and rectified within 04 hrs from the time of receipt of complaint.If,contractor or his tradesman fails to attend and rectify the complained within 04 hrs from the time of receipt of complaint,the compensation/penalty of Rs 50.00 ( Rupees fifty only) per complaint per hr for 04 hrs and after that Rs 100.00 ( Rupees one hundred only) per complaint per hr shall be recovered from the contractor's. 5. The cost of transportation ( to and from) and other necessary T & P, flexible rods,wires,bamboo sticks and other necessary equipment and safety gear shall be arranged/brought by contractor to complete the job and no extra cost shall be paid to the contractor in this effect. 6. Any labourers/workmen, at any point of the time during the course of execution of work, at any cost, will not be allowed to amnual handling of sewage containing human excreta (i.e. night soil and sludge/sewage containing night soil). All the sludge/mud,containing human night soil, from manhcies,gutters shall be removed by mechanical means by deploying required machinery as and when required.The cost in this effect shall be deemed to be inclusive in the quoted rates only. 7. The labourer(s) should not leave the complaint cell till the next reliever(s) does not report to complaint cell. 8. The labourer(s) should be free from the habits of any addiction such as liquor,smoking or other drugs.

M/S B.A. GAIKWAD (BID ID -3505386)

M/S RENUKA CONSTRUCTIONS (BID ID -3514170)

DONGARE & SONS (BID ID -3514156)

DR J S CHADHA AND SONS (BID ID -3508436)

ONKAR ELECTRIC AND GENERAL STORE (BID ID -3508813)

KARPE AND SONS CONSTRUCTION (BID ID -3513589)