One Rake set of Hardware (Group-2) for VB/TS consists of 1.HEXAGON SOCKET HEAD CAP SCREW ISO 4762- M10 X 40-10.9 -16nos SEE NOTE-1,3 2.HEXAGON SOCKET HEAD CAP SCREW ISO 4762- M8 X 25-8.8 - 144 nos SEE NOTE-1,4 3.HEXAGON SOCKET COUNTERSUNK HEAD SCREW-ISO10642- M12X100-8.8-256 nos SEE NOTE1,4 4.FITBOLT DIN 609- M16x2x80 - 10.9 -256 nos SEE NOTE-1,2,3 5.WASHER-ISO 7089 - 10-300 HV - 256 nos SEE NOTE-1 6.WASHER-ISO 7089 - 12 - 300 HV -1848 nos SEE NOTE-1 7.WASHER-ISO 7089 - 14 - 300 HV -512 nos SEE NOTE-1 8.WASHER-ISO 7093-1-12- 300 HV -136 nos SEE NOTE-1 9.WASHER-ISO 7089 - 22 - 300 HV -512 nos SEE NOTE-1 10.WASHER-ISO 7089 - 24 - 300 HV -960 nos SEE NOTE-1 11.WASHER-ISO 7089 - 20 - 300 HV -1920 nos SEE NOTE-1 12.WASHER-ISO 7089 - 16 - 300 HV-2916 nos SEE NOTE-1 13.WASHER- EN 28738 -33-200 HV -256 nos SEE NOTE-1 14.WASHER- EN 28738 -36-200 HV -256 nos SEE NOTE-1 15.WASHER ISO 7093- 1 -16 -300 HV -76 nos SEE NOTE-1 16.SPLIT PIN - ISO 1234-8 x 45-St -128 nos SEE NOTE-5 17.SPLIT PIN -ISO 1234-8 x 63-St - 256 nos SEE NOTE-5 18.PARALLEL PIN IS:6689/ISO 8734-10x24-A-St -128 nos 19.HEXAGON HEAD SCREW PLUG DIN 910-M20 X 1.5-ST -72nos SEE NOTE-1 20.SPLIT PIN ISO 1234-6.3 X 40-st -64nos SEE NOTE-5 21.GASKET DIN 7603-A 21 X 26-CU-72nos NOTE: 1. Zinc flake coating (Geomet321 or equivalent) with top coat, without any hexavalent chromium, without any integrated or separately added lubricant. Minimum salt spray test life of 1000 hours is to be ensured. 2. Fit bolt shall have coarse thread with 2mm pitch. 3. Zinc electroplated to grade A3L of annex-E of IS: 1367 (part eleven)

WELS/KGP/SOUTH EASTERN RLY Description :One Rake set of Hardware (Group-2) for VB/TS consists of 1.HEXAGON SOCKET HEAD CAP SCREW ISO 4762- M10 X 40-10.9 -16nos SEE NOTE-1,3 2.HEXAGON SOCKET HEAD CAP SCREW ISO 4762- M8 X 25-8.8 - 144 nos SEE NOTE-1,4 3.HEXAGON SOCKET COUNTERSUNK HEAD SCREW-ISO1064 2- M12X100-8.8-256 nos SEE NOTE1,4 4.FITBOLT DIN 609- M16x2x80 - 10.9 -256 nos SEE NOTE-1,2,3 5 .WASHER-ISO 7089 - 10-300 HV - 256 nos SEE NOTE-1 6.WASHER-ISO 7089 - 12 - 300 HV -1848 nos SEE NOTE-1 7.WASHER-ISO 7089 - 14 - 300 HV -512 nos SEE NOTE-1 8.WASHER-ISO 7093-1-12- 300 HV -13

O 7089 - 16 - 300 HV-2916 nos SEE NOTE-1 13.WASHER- EN 28738 -33-200 HV -256 nos SEE NOTE-1 1 4.WASHER- EN 28738 -36-200 HV -256 nos SEE NOTE-1 15.WASHER ISO 7093- 1 -16 -300 HV -76 nos SE E NOTE-1 16.SPLIT PIN -ISO 1234-8 x 45-St -128 nos SEE NOTE-5 17.SPLIT PIN -ISO 1234-8 x 63-St - 256 nos SEE NOTE-5 18.PARALLEL PIN IS:6689/ISO 8734-10x24-A-St -128 nos 19.HEXAGON HEAD SCREW PL UG DIN 910-M20 X 1.5-ST -72nos SEE NOTE-1 20.SPLIT PIN ISO 1234-6.3 X 40-st -64nos SEE NOTE-5 21 .GASKET DIN 7603-A 21 X 26-CU-72nos NOTE: 1. Zinc flake coating (Geomet321 or equivalent) with top coat, without any hexavalent chromium, without any integrated or separately added lubricant. Minimu m salt spray test life of 1000 hours is to be ensured. 2. Fit bolt shall have coarse thread with 2mm pitc h. 3. Zinc electroplated to grade A3L of annex-E of IS: 1367 (part eleven) [ Warranty Period: 30 Mont hs after the date of delivery ] ] Consignee DY,CME/DW/KGP, SER West Bengal 1.00 Set Inspection Stage Inspection Not Required Details