ADDITIONAL/ALTERATION OF CHETAK GAURAV HALL, RENOVATION OF TOILET, PROVN OF ONE TOILET BLOCK ADJOINING OFFICE COMPLEX OF OC DEF EMP COY OF HQ 10 CORPS , PROVN OF 02 X WAITING SHEDS WITH SEATING FACILITY FOR INDL

Amount

SCHEDULE 'A' B/R Works

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in (soft/loose soil) including removing excavated soil to a distance n.exc 50mtr complete all as specified and directed by Engr-in-Charge.

Excavation in trenches in soft / loose soil not exceeding 1.5 meter wide & not exceeding 1.5 meter in depth for foundations of manholes, sewerage pipe lines etc including getting out complete all as specified and as directed by Engineer-in-Charge .

Returning filling in including spreading levelling watering and well ramming in layers n. exc 25 cm complete all as specified and directed.

M&L for excavating in Post holes soft/loose soil (or similer holes) not exc 0.50 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cum watering and including removing excavated soil to a distance not exc 50 m and making good surface complete all as specified and directed by Engr-in-Charge.

M&L for sand filling under paver block including consolidation complete all as specified.

Removing excavated mtrl n.exc.50 Mtr & depositing where directed at a level n.exc.1.5Mtr above the starting point all as specified.

M&L for Hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge.

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation , filling, subbase and mass concrete complete all as specified and directed.

M&L for cement concrete type C-1 (1:3:6) (using 20mm graded aggregate) as in postholes, foundations, filling and mass concrete, side kerb, haunching and like complete all as specified and directed by Engr-in-Charge.

M&L cement concrete Type B-0, 1:2:4 using 12.5mm graded stone aggregate as in filling of door frames of pressed steel and in bed blocks etc complete all as specified and as directed.

M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping including slightly rounded or chamfered angles and including necessary form work complete all as specified and directed.

M&L for precast cement concrete Type B1 1:2:4 (20mm graded aggregate) as in landings, cover slabs, precast man hole covers, set in CM 1:6 complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) in Type B1 1:1.5:3 (20 mm graded aggregate) as in Foundations, including rafts, footings, foundation beams;plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) in Type B1 1:1.5:3 (20 mm graded aggregate) as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) in Type B1 1:1.5:3 (20 mm graded aggregate) as in Beams, cantilevers, bressummers, chajjas, lintels over 1.5m span complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) in Type B1 1:1.5:3 (20 mm graded aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L Integral waterproofing compound.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks old size straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for brick work with sub class ‘B’ (modular size bricks) straight or curved on plan any radius in half brick thick walls, built in CM 1:4 all as specified and directed.

Cutting chases exceeding 10cm but not exceeding 20cm girth for roof slab and making good in cement mortar 1:3 complete all as specified and as directed.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core,etc.. to store and rubbish not exc. 50m complete all as specified and as directed by Engr-in-Charge.

M&L for granite (any type) 20 mm thick work(table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, counter, shelves and like in cement mortar )1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM 1:4 and moulding on edges by grinding complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter complete all as specified and directed.

M&L form work to soffits of suspended slabs such as roof slabs, floor slabs, landings, beams,chajjas and similar work not exceeding 200 mm thick (Horizontal/Sloping) receive for fair finished surfaces complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, chajjas, cantilevers, shelves including supports,overhangs,etc. also splays between floors and beams, etc.complete all as specified and directed.

Formwork to sides of pillars,posts, struts, piers, columns and stanchions complete all as specified and directed.

Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed

Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolts extruded section and fixed complete all as specified and directed

S&F 250mm long aluminium alloy anodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed

S&F 100 mm mild steel butt hinges medium weight,cold rolled complete all as specified and directed

S&F 125 mm Aluminium handles, cast type, anodised complete all as specified and directed

S&F Mortice lock alumunium body, vertical type of size 100mm of 4 levers etc compete all as specified and as directed

S&F 25mm dia curtain rails, mild steel, chromium plated with fixing fancy type brackets, side knob, stops rollers etc complete all as specified and directed.

Cutting into existing manholes for connecting new drains150mm dia pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F Brass chromium plated towel rail 600mm long with and incl CP brass screws and wooden/plastic cleats complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperure 1.40 mm and fixed with stainless steel wire staples fixed complete all as specified and directed.

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixedcomplete all as specified and as directed.

M&L for Mild steel TMT Bar 8 mm dia cut to length , bent to shape to required , including cranking , bending spirally for hoping for columns , hooking ends and binding with and including mild seel wire ( anneled ) not less than 0.9mm dia or securing with clips quality confirming all as specifed and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Ditto as per item No 43, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for mild steel rolled sections as in base and top of Map boards for sliding of map boards including all accessories ie. rollers, connecting plates, main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed by Engineer-in-charge.

S&F mild steel work as in tubular (round/square/rectangular shape of pipes as approved by Engr-In-Charge) trusses, purlins, rafter, MS plates,connecting plates, up to height 7mtr including post special shaped washers etc complete incl necessary nut bolts, wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1998 grade St-240 complete all as specified and directed by Engr-in-Charge.

S&F welded steel wire fabric n.exc 4Kg/Sqm as in cladding, inluding cutting in pieces and fixed in mild steel frame complete all as specified and directed by Eng- In-Charge.

S&F 105X60mm pressed steel frames Pre-painted for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified made out of 1.25mm thick MS Sheet complete all as specified and as directed.

S&F for Pre -Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm Thickness of any colour having aTensile strength of 550 MPA as in roof covering fixed with 'L' type or 'J' type or cranked hook bolts all as specified and directed by Engineer-in-Charge.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,valley gutters fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

M&L for 25 mm thick PCC 1:2:4, type B-0 (20 mm graded aggregate) in levelling course, sub base of sunken floor and like complete all as specified and directed.

M&L for machine pressed pre cast concrete paver block reflective type any shape and size of 60mm thick M-35 gde with grey cement and pigments (Coloured) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles and rubbish off the permises complete all as specified and directed.

M&L for applying 2mm thick one coat of white wall care putty on walls complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces , including racking out joints , hacking for key, scrubbing down with water complete all as specified and directed.

M&L preparation of new steel surfaces & applying two coats of synthetic enamel paint over one coat of red oxide primer over 10cm width or girth all as specified.

S&F 20 mm GI tube medium grade with all necessary fittings and fixed concealed in wall and ceiling or laid in floors complete to wall and ceiling or laid in floors complete all as specified and directed.

S&F 15 mm GI tube medium grade with all necessary fittings and fixed concealed in wall and ceiling or laid in floors complete all as specified and directed.

Taking up or down 20 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 15 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Refixing 20 mm GI tubing and connection in new or old position concealed in wall and ceiling or laid in floors including all fittings all as specified and directed.

S&F 500 Ltr rotational moulded polyethylene water stotage tanks ( cylinderical verticle with closed top) hoisted & fixed in position complete all as specified and directed.

S&F in repairs 15 mm bore stop cock,(angle valve) cast copper alloy, fancy type, chromium plated, screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 15mm dia stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and as directed.

S&F in repairs 20 mm bore gun metal or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F PVC connection 15mm dia of length not less than 450mm with both ends, brass fly nut complete all as specified & as directed.

S&F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified & directed

S&F in repair 75mm bore soil waste and vent pipes CI ( sand cast) in any lengths with or without ears fixed on walls with stack clamp of flat iron at fixed interval as directed by Engr-in-Charge or under floors with cement joints including taking down old CI pipes with fittings complete all as specified and as directed by Engr-in-Charge.

S&F in repair 100mm bore cast iron plain bends Tapers etc complete all as specified and directed.

S&F in repair 75mm bore cast iron plain bends Tapers etc complete all as specified and directed.

S&F in repair 100mm bore cast iron cowls complete all as specified and directed.

S&F in repair 75mm bore cast iron cowls complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in walls/ laid in trenches/floors complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in walls / laid in trenches/floors complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 110 mm dia all as specified and directed.

S&F in repair PVC (SWR) bends any radius 75 mm dia all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair 100mm bore cast sanitary connection socket to fit WC outlet complete all as specified and directed.

S&F in repairs 75mm dia cast iron floor/Nahani trap with CP grating with or without hole including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2, concrete bed to drain pipes 100 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested; complete all as specified and directed.

M&L for 150 mm bore salt glazed stone ware drain pipes laid in trenches and jointed complete all as specified and directed.

Demolition of brick work, built in Cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Demolition of cement concrete in ground floor, (unreinforced) paving nexc 15 cm thick(below or above GL) incl tiling if any complete all as specified and directed

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling boarding/ Map boards of any description and refixing in any position, complete all as specified and as directed by Engineer-in-charge.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

Dismaintling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed by Engr-in-Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets fixed in any position with nails fixed with screws complete all as specified and as directed by Engineer-in-Charge.

M&L cement concrete 1:5:10 type E2 as in filling of sunken floor complete all as specified and as directed.

Supply and fixing Gl powder coated frame work 605 mm X 605 mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and duly suspended with 4mm GI wire hangers (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including providing 600x600x10-12mm thick ceiling mineral fibre board in grid fixed in false ceiling grid as per above specifications complete all as specified and as directed by Engineer-in-Charge.

S&F hollow PVC Lining consisting 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed by Engineer-in-Charge.

S&F Aluminium (extruded section body) door closer hydraulically regualted, designation No 3 universal type, suitable for door shuttes of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr in charge.

Supply & fixing powder coated aluminium frame for partition doors, windows and ventilators with one or more rebates including jointing cleat for fixing etc. and aluminium anodised skelton windows & ventilator shutter fixed with glass or gauge, side hung type without sash bars using standard aluminium section including necessary aluminium grill, jointing cleats, glazing clips, rubber packing anodised aluminium snap beadings screws, anodised aluminium fittings such as handles stainless steel adjustable friction stay hinges etc. including aluminium grills fixed to window frame aluminium anodised wire cloth fixed to aluminium frame, complete all as specified and directed by Engineer-in-Charge. Note :- (i) Payment under this item will be make only for the cost of aluminium section. However unit rate quoted shall deemed to include cost of rubber beading, fittings such as handles, SS friction stay hinges and fixing of 5mm thick glass etc. (ii) S&F 5mm thick sheet glass and aluminium wire cloth be measured and paid separately (iii) Weight of aluminium handle & SS hinges shall not be accounted for payment purpose.

Supply and fixed powder coated aluminium door shutters (Minimum thickness of powder coating 50 micron), aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, aluminium snap beading, screws etc complete all as specified and directed by Engr- In-Charge.

S&F powder coated aluminium (Minimum thickness of powder coating 50 micron) as in windows and ventilator shutters, without sash bars, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles ,hinges,tower bolt, aluminium snap beading, screws etc. complete all as specified and directed by Eng- In-Charge.

M/L for 75 mm thick PCC 1:3:6 type C2 , using 40 mm graded stone aggregate in plinth protection,aprons, hard standing, path and like including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L Digital glazed ceramic coloured tiles of size 300x600x7 to 8mm on vertical surface as in dados, skirting etc, set and jointed in neat cement slurry over and including 10mm thick plaster in cement mortar 1:4, pointed with white/ coloured cement to match.

M&L for coloured glazed ceramic tiles in vertical surface 300x600X7mm thick set and jointed over and including 10 mm thick rendering even and rough in CM1:4 for backing of tiles, jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed.

M/L for non skid ceramic coloured tiles 7mm to 8 mm thick (square /rectangular) area of each tile exceeding 0.18 Sqm, but not exceeding 0.36 Sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified & directed

M & L for coloured digital glazed tiles, 9 to 10 mm thick (square / rectangular), polished, size area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, as approved by GE as in skirting, dados including 10mm thick plaster in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and directed by Engr-in-Charge.

M & L for coloured digital glazed tiles, 9 to 10 mm thick (square / rectangular), polished, size area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, as approved by GE in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles. with including 15 mm thick Screed bed or bedding layer in CM (1:4) complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick rendering in cement mortar 1:3 on concrete surfaces as in sunken portion including mixing of liquid WPC in mortar @ 200ml per bag of cement of 50 Kg finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. Note: Liquid water proofing compound shall be measured and paid seperately.

M&L for 10mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceiling, chajjas including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L15mm thick rendering in CM 1:6 on brick/concrete surfaces including finishing the surfaces even and smooth (without using extra cement) complete all as specified and directed

M&L 15mm thick rendering in CM 1:4 on brick/concrete/stone masonry surfaces including finishing the surfaces even and smooth (without using extra cement) complete all as specified and directed by Engr-In-Charge.

M&L for rendering 15mm thick in CM (1 :4) mixed with water proofing coumpound @ 3% by the weight of cement on brick work or concrete surfaces on wall /roof finished even & fair complete all as specified & as directed. Note:- Water proofing compound will be measured separately.

M&L for preparation of old decorated surfaces of walls include brooming down or steel wire brushing, scraping down smoke soot, moulds,moss and efflorescent salts and trading oil and greasy spots and applying two coats of oil bound distemper complete all as specified and as directed.

Ditto- all as per Item No. 110 above but on ceiling complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of cement base paint on walls complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over chalk whiting complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying three coat white wash complete all as specified and as directed.

M&L for complete removal of existing treatment from walls and applying two coats of plastic emulsion paint on wall complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of plastic emulsion paint on wall complete all as specified and directed by Engr-in-Charge.

M&L for complete removal of existing treatment from ceiling and applying two coats of plastic emulsion paint on ceiling complete all as specified and directed by Engr-in-Charge.

S&F in repair 1000 Ltr rotational moulded polyethylene water stotage tanks ( cylinderical verticle with closed top) hoisted & fixed in position including taking down old tank complete all as specified and directed.

S&F in repairs 15 mm bore Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed.

S&F in repair 100mm bore soil waste and vent pipes CI ( sand cast) in any lengths with or without ears fixed on walls with stack clamp of flat iron at fixed interval as directed by Engr-in-Charge or under floors with cement joints including taking down old CI pipes with fittings complete all as specified and as directed by Engr-in-Charge.

S&F in repair 100mm bore CI single branch pieces/Tee equal or unequal with oval access doors complete all as specified and directed.

S&F in repairs vitreous china wash down water closed pan(pedestal Pattern), white(excluding fixing bolts, flushing cistern and flush pipe) and including plastic seat cover complete all as specified and directed.

S&F in repairs vitreous china squatting pan "Orissa Pattern" size 580mm x 440mm white with integral foot rests, including prov of cement concrete bedding and 'P' or 'S' trap as required complete all as specified and directed.

S&F in repairs vitreous china urinal half stall type white of size 345x320x560mm, with grating and union for discharge pipe (excluding flushing cistern and flush pipe and waste pipe) including CP urinal spreader complete all as specified and directed. Make : Prayag, Cat Part No 4998 URS-WHT-13259 in Jaquar or equivalent as per appendix 'A'

S&F in repairs vitreous china urinal of size 410x380x950mm, half stall type white, with grating and union for discharge pipe (excluding flushing cistern and flush pipe and waste pipe) including CP urinal spreader with accessories complete all as specified and directed.

S/F in repairs brass chromium plated shower rose 150mm in size with or without swivel joints any size incl fixing to steel pipe or union, complete all as specified and directed.

S&F Chromium plated shower rose 150mm size with swivel joint including fixing to steel pipe or union complete all as specified and directed..

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) in any description and in any position not other wise specifically provided for complete all as specified and directed.

S&F in repair 100mm dia CP grating complete all as specified and directed.

S&F soap Dish CP fancy type of standard quality and size complete all as specified and as directed.

S&F 32mm bore PVC waste pipe for WHB/ urinal complete all as specified and directed.

Material and labour for preparation of new/ old polished wooden surfaces of any description not otherwise described over 10cm width or girth & applying two coats of french polishing to achieve glossing finish upto entire satisfication, including a coat of wood filler complete as specified and as directed as per existing or as approved tint/colur complete all as specified and as directed by Engineer-in-charge. .

S&F stainless steel glass door handle "H" handle of size 300mm long complete all as specified and directed by Engr- In-Charge.

S & F in repair health faucet including accessories complete all as specified and directed.

S&F low density polyethylene (LDPE) pipe of pressure rating 6 Kg/Sqcm 32mm bore etc complete all as specified and as directed.

S&F in repair Toilet Roll Holder with Stainless Steel Flap complete CAT Part No- AKP-35753PS of Jaquar Customer Guide Vol 15A or equivalent make as per appx 'A'.

S&F Towel Ring Round complete CAT Part No- AQN-7721 of Jaquar Customer Guide Vol 15A or equivalent make as per appx 'A'.

S&F in repair Single Towel Rail 600mm long complete CAT Part No- AQN-7711 of Jaquar Customer Guide Vol 15A or equivalent as per appendix 'A'

S&F Glass shelf 550mm long complete CAT Part No- AQN-7771 of Jaquar Customer Guide Vol 15A or equivalent make as per appx 'A'.

M&L for Endura tiles/ stone (coloured/designer) heavy duty of size 300mmx300mm, 10-12mm thick, as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15mm thick bedding layer (screed) in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

M/L for non skid ceramic coloured tiles 7mm to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 Sqm, but not exceeding 0.18 Sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified & directed

M/L for non skid ceramic coloured tiles 7mm to 8 mm thick (square /rectangular) area of each tile exceeding 0.06 Sqm, but not exceeding 0.11 Sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified & directed

S&F factory made solid PVC moulded door shutter with particle board core 28 to 30 mm thick (style) with 2,4, or 6 raised panel design with 2mm thick moulded prelam wood grain colour PVC sheet on the front face and 2mm plain colour PVC sheet on back face complete all as specifed and directed.

M&L for complete removal of old decorated surfaces of walls by brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent, salts and treating oil and greasy spots and applying two coats of exterior water base emulsion paint over a coat of primer on walls complete all as specified and as directed.

Supply and fixed SENSOR Urinal with fixing accessories complete set, of sixe 37cmx39cmx61 cm SENSOART built in sensor of pastel with CAT Part No 60018 of Hindware or equivalent as per appendix 'A' complete all as specified and directed by Engr-in-Charge.

Supply and fixed Aquisense SENSOR Faucet (Pillar Cock) for Wash Basin with base flange complete all as specified and directed by Engr-in-Charge. Make: Cat Part No SNR-CHR-51011 of Jaquar or Equivalent make as per appx 'A'.

Material and labour for powder coated aluminium three way track sliding windows of frames size 92mm x 31.75mm x 1.5mm thickness (section No. 20831 of Jindal) and of shutter size 40mm x 18 (with 9mm interlocking legs) x 1.45mm thick (Section No. 20737 of Jindal), section (two shutter glazed, covering half of span of opening each & one shutter skelton covering half of span of opening) including provn for making windows air tight, including 95mm aluminium handle with spring lock, stainless steel wire cloth, 0.45mm nominal dia of wire average width of aperature 1.4mm and fixed with steel wire stapples and 5mm thick plain glass including necessary fitting/fixture/aluminium snap beads, complete all as specified and directed by Engineer-in-Charge. NOTE:- Measurement shall be taken for clear opening i.e. out to out window frame as whole including all fittings and fixtures and no extra shall be paid separately. Make :- Jindal or equivalent as per appendix 'A'

Supply & fixing powder coated, aluminium window/ventilator shutter side hung type without sash bars, made out of aluminium section weighing 0.55 Kg/mtr, powder coated (minimum thickness of powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21, 100mm long (2 No. for ventilator and 3 Nos for window each shutter) suitable handle (1 No.), including fixing of glass, including taking old unserviceable shutter with fittings, complete all as specified and directed by Engineer-in-Charge. Note :- (i) Aluminium chowkhat frame shall be measured and paid separately under appropriate item of BOQ as supply and fixing. (ii) Glass and other filling material in panels shall be measured and paid separately under appropriate item of BOQ.

Supply & fixing rotational moulded polyethylene water storage tank white colour of capacity 500 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection and fixing ball valve and gate valve including dismantling/taking down of existing unserviceable PVC water storage tanks of any description complete all as specified and as directed by Engineer-in-charge.

S&F 40mm thick flush shutters, solid core construction, with block board core and plywood face pannels , decorative type sunmica (1 to 1.5mm thick) pasted on bothsides and edges covered with waterproof beading complete all as specified and design approved by Engr-in-Charge.

S&F table top/couner top vitreous china one piece wash hand basin 600x360x95mm with accessories fixed (cat part no ARS WHT-39903 in Jaquar or-4703 in Prayag(Bloom) ) or equivalent as per appendix 'A'

S&F in repairs single piece vitreous chinaware white EWC with connected chinaware flushing cistern, seat cover and twin flush fittings fixed complete all as specified and directed by Engr-in-charge. Make : Prayag, Cat Part No 4250(Saga), KUS-WHT 358515N in Jaquar or equivalent as per appendix 'A'

S&F brass CP single lever basin mixer for mixing hot and cold water screwed down for iron pipe and complete all as specified and directed by Engr-in-charge. Make : Prayag, Cat Part No 4345 KUP-35051BPM in Jaquar or equivalent as per appendix 'A'

S&F brass CP wall mixer telephonic with hand shower with 1.5 mtr flexible S S tube, mixing hot and cold water screwed down for iron pipe and complete all as specified and directed by Engr-in-charge.

S&F health faucets CP with 1.00 mtr long CP flexible pipe and hook fixed complete all as specified and as directed. Make : Prayag, Cat Part No BEA-95 or equivalent as per appendix 'A'

S&F toilet paper holder CP of standard quality and size complete all as specified and as directed.

S&F towel rack of 600mm long CP fancy type of standard quality and size complete all as specified and as directed.

S&F CP bottle trap for WHB/Urinal outlet of standard quality and size complete all as specified and as directed.

S&F 15 mm bore bib cock long body with flange , chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed.

S&F 8mm thick superior quality toughened glass for urinal partition fixed with SS brackets on walls complete all as specified and as directed by Engr-In-Charge.

Supply & fixing powder coated aluminium grills 75mmx75mmx6mm thick, fixed to window frame including channels, accessories complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 32mm bore PVC waste pipe for WHB/ urinal complete all as specified and directed.

S&F corner glass shelf (with bracket) made up of glass 30 cm in size complete all as specified and as directed by Engr-In-charge. Make : Prayag, Cat Part No BEA 56 ACN-1173 in Jaquar or equivalent as per appendix 'A'

S&F sheet glass shelf assembly (with bracket) consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by Engr-In-charge.

S&F brass CP centre hole wash hand basin mixer for mixing hot and cold water screwed down for iron pipe and complete all as specified and directed by Engr-in-charge. Make : Prayag, Cat Part No 6850 FLR-5169NB in Jaquar or equivalent as per appendix 'A'

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of exterior water base emulsion paint over a coat of primer on walls complete all as specified and as directed.

Material and labour for applying two coat coats of Ultratech Seal and Dry (Hi-Flex) High Polymer Enriched Cementitious Binary Waterproofing system @ 1.2 Ltr Per Sqm complete all as per manufacturer instructions and directed by Engr-in-Charge.

Supply and fixed 10mm thick superior quality toughened glass (500mmx1200mm) for urinal partition fixed with SS brackets on walls, including accessories complete all as specified and as directed by Engineer-in-Charge.

S&F stainless steel three seater visitor chair of standard quality (design approved by Engr-in-charge) as manufacturer specification complete all as specified.

Supply and fixing ACP sheet 6mm thick of approved colour fixed to aluminium door, partition and like complete all as specified and directed by Engr- In-Charge.

S&F Single piece slim concealed Cistern with floor mounting frame, installation kit and S Type drain pipe connected set for wall Hung WC (Without flush control plate ) complete CAT Part No- JCS-WHT-2400S and Control plate Opal complete CAT Part No - JCP-CHR-152415 of Jaquar Customer Guide Vol 15A or equivalent as per appendix 'A'

S&F RIMLESS wall hung WC size 400mmx500mmx370mm with UF soft cose seat cover including all fittings/ accessories set complete all as specified and directed by Engr-in-Charge. Make Jaquar Cat Part No: VGS-WHT-81953 or equivalent as per appendix 'A'

S&F Liquid Soap dispenser with Glass Bottle complete CAT Part No- ACN-1135N of Jaquar Customer Guide Vol 15A or equivalent as per appendix 'A'

S&F Toughned glass superior quality (Frosted) of 10mm thick high quality glass used as door shutter, partition for Doors,Urinal and WC area complete all as specified and directed.

S&F in repair Bib cock with wall flange, CAT Part No- ALI-85037 of Jaquar Customer Guide Vol 15A or equivalent as per appendix 'A' complete all as specified and directed by Engr-in-Charge.

S&F 15 mm bore 2 way bib cock with flange , chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed. Make : Prayag, Cat Part No 6612 KUP-35041 PM in Jaquar or equivalent as per appendix 'A'

Material and labour for wooden wall panneling including wooden fillets frame, 19mm thick plywood for base, and 4 mm thick teak plywood on top with grooves complete as specified and as directed or as approved complete all as specified and as directed by Engineer-in-charge. .

S&F single piece vitreous chinaware white EWC with connected chinaware flushing cistern, seat cover and twin flush fittings fixed complete all as specified and directed by Engr-in-charge. Make : Prayag, Cat Part No 4250(Saga), KUS-WHT 358515N in Jaquar or equivalent as per appendix 'A'

S&F75mm dia cast iron floor/Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repairs syphonic action type PVC low level flushing cistern 10 ltrs capacity incl 32mm dia flush pipe and fixing to supply pipe including PVC connection 600 mm long 15 mm bore with brass heads & washers with connections fixed in repairs complete all as specified and directed.

SCHEDULE 'A' ELECTRIFICATION WORKS

Taking down carefully existing unserviceable copper/aluminium point wiring (light/fan/socket or power point) complete with all accessories such as hylum sheet, switches, sockets, ceiling rose, wall brackets, regulator gang boxes etc & making good distrubed surfaces of walls/floor etc and matching with existing surface all as specified and directed by Engr - in- Charge

Material and labour for concealed sub main wiring with 6 Sqmm single core (Two run) FRLSH PVC insulated multistrand copper conductor new PVC concealed conduit 20 mm, independent circuit from DB and including one run 6 Sqmm FRLSH PVC insulated unsheathed multi strand copper conductor continues as earth wire connected to earth dolly etc. including taking out old sub main wiring of any conductor any size from conduit and making good disturbed surfaces of walls as per original complete all as specified and as directed by Engineer-in-charge. Note :-Three run of 6 sqmm copper wire shall be measured as one RM length for payment.

Material and labour for concealed sub main wiring with 6 Sqmm single core (Two run) FRLSH PVC insulated multistrand copper conductor new PVC concealed conduit 20 mm, independent circuit from DB and including one run 6 Sqmm FRLSH PVC insulated unsheathed multi strand copper conductor continues as earth wire connected to earth dolly etc. making good disturbed surfaces of walls as per original complete all as specified and as directed by Engineer-in-charge. Note :-Three run of 6 sqmm copper wire shall be measured as one RM length for payment.

Material and labour for concealed sub main wiring with 4 Sqmm single core (Two run) FRLSH PVC insulated multistrand copper conductor drawn through existing conduit 20mm dia (medium quality ISI marked), on independent circuit from DB and including one run 4 Sqmm FRLSH PVC insulated unsheathed multi strand copper conductor continues as earth wire connected to earth dolly etc. including all fitting arrangement i.e. PVC clamp, rawl plug, screw, terminal/junction box, tee, bend etc. and including cutting of chases in wall, taking out old sub main wiring of any conductor any size from conduit and taking down old unserviceable conduit with fittings, and making good disturbed surfaces of walls as per original complete all as specified and as directed by Engineer-in-charge. Note :-Three run of 4 sqmm copper wire and one run conduit shall be measured as one RM length for payment.

Material and labour for concealed point wiring with 1.5 sqmm (nominal cross section area ) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) drawn through and including PVC rigid conduit 20mm dia( heavy duty ) with all fittings and all accessories i.e pipe bend pipe hook, elbow, junction box, pressed steel powder coated sunken box of suitable size (min 60mm deep, suitable lenth and 1.2mm thick), 3mm thick bakelite plastic laminated sheet for mounting switches and socket, fan regulator, for light/fan point controlled by one switch, top cover fixed with brass screws & cup washers including provn of 1.5 sqmm FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc., including cutting chases in wall and making good distrubed surface of wall/ceiling/floors etc by using CM (1:3 ) to matching with existing surface complete all as specified and as directed by Engineer-in-charge.

All as per item No 190 here in before but for socket outlet 5 pin 5 Amp on same board, complete all as specified and as directed by Engineer-in-Charge.

All as per item No 190 here in before but for socket outlet 5 pin 5 Amp on independent board but not below the switch board, complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No 190 here-in-before but socket out let one 6 pin, 6/16 Amps, 2 in 1 with cable 2.5 Sqmm multistranded copper conductor FRLSH cable on the independent board including provision of 2.5 Sqmm PVC insulated copper conductor FRLSH cable continuos as earth wire connected to earth dolly conductor etc., complete all as specified and as directed by Engineer-in-Charge.

M& L Lamp holder PVC/polycarbonate type with back plate suitable for battern fitting with LED bulb 9W Complete all as directed.

Supply and fixing Socket outlet multipurpose, 2 in 1, 5 pin, 5/6 Amps, flush type, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing switch piano flush type, single pole, one way, 5/6 Amps ISI mark, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing switch piano flush type, single pole, two way, 5/6 Amps ISI mark, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing switch piano flush type , single pole, one way, 15/16 Amps ISI mark, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Socket outlet multipurpose , 2 in 1, 5 pin, 15/16 Amps, flush type, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing ceiling rose surface type polycarbonate, isolated body two to three terinal,, tpline series 65 x 50mm, 6 Amps, three terminal, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement (concealed in wall or as directed) factory made DB (made out of CRCA sheet) SPN, 12 Way 240V, double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge.

Supply and fixing (concealed in wall or as directed) factory made DB (made out of CRCA sheet) SPN, 8 Way 240V, double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge.

Supply & Fixing sheet metal enclousers made out of CRCA mild steel sheet, IP-43 protection, flush mounted for metal door, powder coated DB VTPN 6 way, 415 V AC with 200 Amps rated bus bar, Double door, 8 + 12 module, dust and vermin proof suitable for incorporation of MCB's and isolator etc. including taking down old unserviceable DB, complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement MCCB 4 pole, 415 Volt fixed thermal and fixed maganatic setting of cap 125 Amps 25KA ICS=100% ICU

Supply and fixing MCB SPN 32 Amps, 10 KA 'B' curve 240 V AC, 50 Hz including necessary attachment, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing MCB SPN 40-63 Amps, 10 KA 'B' curve 230 V AC, 50 Hz including necessary attachment complete all as specified and directed by Engineer-in-Charge.

Supply and fixing MCB SP suitable for 230 volts AC supply 6 to 40 Amps, SP rupturing capacity not less than 10KA, B Curve ISI Marked complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement new generation energy saving ,wall mounted LED Tube light batten fittings , extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver 20 Watt LED power factor > 0.95, 100 lumen/watt duly fitted on pvc square block 5700K (4' ft long ) with LED rod 20 watt, 230 Volts 50 Hz. complete all as specified and as directed by Engineer-in-Charge.

S&F new generation energy saving ,wall mounted LED Tube light batten fittings , extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver 20 Watt LED power factor > 0.95, 100 lumen/watt duly fitted on pvc square block 5700K (4' ft long ) with LED rod 20 watt, 230 Volts 50 Hz. complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete power factor > 0.95, 100 lumen/watt, CCT min 5700K complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Earthing complete with galvanised iron earth plate electrode of size 60cm x 60cm x 6.3mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including earth continuity GI wire 4 mm (upto test point from earth plate i.e. 7.5m min) by means of GI bolts/nuts/washers and including protected by 15mm dia GI light grade protection pipe from earth plate to test point, including making of test point. Earth plate shall be surrounded by packed layer of char coal/coke & salt all around bottom and top with alternative layer. 20mm GI light grade pipe for watering (should be 10cm above GL) and including socket, plug, funnel, wire mesh, RCC cover and (including steel for cover) PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in earthing pit including necessary form work, excavation & earth work, all as specified & shown in electrical plate No. 3 of SSR (Part – I) complete all as directed by Engineer-in-charge. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner.

Material and labour for Earthing complete with galvanised iron earth plate electrode of size 60cm x 60cm x 6.3mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including earth continuity GI wire 4 mm (upto test point from earth plate i.e. 7.5m min) by means of GI bolts/nuts/washers and including protected by 15mm dia GI light grade protection pipe from earth plate to test point, including making of test point. Earth plate shall be surrounded by packed layer of char coal/coke & salt all around bottom and top with alternative layer. 20mm GI light grade pipe for watering (should be 10cm above GL) and including socket, plug, funnel, wire mesh, RCC cover and (including steel for cover) PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in earthing pit including necessary form work, excavation & earth work, all as specified & shown in electrical plate No. 3 of SSR (Part – I) including taking out/dismantling old unserviceable earthing system complete all as directed by Engineer-in-charge. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner.

Supply and fixing in provision of BLDC (Brushless direct current motor) ceiling fan 5 star rated, complete with blades, down rods, and accessories, 230 Volts, 1200mm sweep, Min air delivery 210 CFM with service value 6.00 BEE, including electrical connection providing twin core round copper conductor cable of suitable size, complete all as specified and as directed by Engineer-in-Charge. Note :- (i) Srl Number of ceiling fan and 'GE North BTD' shall also be writing on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate, nothing shall be paid extra on this account, Srl number will be issued by Engineer-in-Charge. (ii) Ceiling fan installed/hanging at site as directed by Engineer-in-charge (from market to AGE E/M store/AGE E/M store to sites /Location, all conditions will be the responsibility of contractor and nothing extra will be admissible on this account

Supply and fixing of exhaust fan stainless steel body 300 mm sweep (BEE, 5 star rated) with louvres, 230V, single phase AC supply, hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface as per existing surfaces, and connection to fan with suitable flexible twin core round copper wire complete all as specified and directed by Engineer-in-Charge. Note :- (i) Srl Number of exhaust fan and 'GE North BTD' shall also be writing on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate, nothing shall be paid extra on this account, Srl number will be issued by Engineer-in-Charge. (ii) Exhaust fan installed/hanging at site as directed by Engineer-in-charge (from market to AGE E/M store/AGE E/M store to sites /Location, all conditions will be the responsibility of contractor and nothing extra will be admissible on this account

Supply and fixing in provision of storage type water heater (Geyser) electrical operated 230/240 Volts 25 ltr capacity, BEE 5 star rated complete with all safety equipment and accessories such as safety valve, thermostat, plug top, etc. required for proper functionality & including electric/earth connections complete all as specified and directed by Engineer-in-Charge. Note :- (i) Srl Number of Gyeser and 'GE North BTD' shall also be writing on Gyeser with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate, nothing shall be paid extra on this account, Srl number will be issued by Engineer-in-Charge. (ii) Gyeser installed at site as directed by Engineer-in-charge (from market to AGE E/M store/AGE E/M store to sites /Location, all conditions will be the responsibility of contractor and nothing extra will be admissible on this account.

Supply and fixing in provision of (concealed in wall or as directed) single pole and neutral sheet metal enclosure (geyser Box) with a two pin and earth plug and socket complete with one single pole MCB of capacity 25 Amps, 240 volts, AC supply, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing stepped type electronic fan regulator flush type on existing sheet, complete all as specified and directed by Engineer-in-charge.

Supply, laying and testing cable for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 2 core cable from pole to bldg all as specified and directed..

Supply and fixing modular Switch 1 way 6A ,1 module 250 volts AC one way ISI, marked model fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge.

Supply and fixing modular Socket 6 A-2/3 pin combined 2 module shuttered 250 volts AC ISI, marked model fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge.

Supply and fixing modular Switch 1 way 16 A,1 module 250 volts AC ISI marked , model fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge.

Supply and fixing modular Socket 6A/16A-2/3 pin combined,2 module 250 volts AC shuttered ISI marked, model fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in replacement recessed LED (warm white) ceiling cool light type for maximized glare free output suitable for 600x600mm and ceiling cutout 595x595mm modular grid/POP ceiling complete fitting with separate electronic driver and high brightness SMD LEDs 36 watt, 6000K and one nos extra LED driver along the fittings including connecting electric connection, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED mirror light fiting 7/ 9 watt, 6000K, lineer & compact with decorative grey end caps, polycarbonate body and ribbrd opal diffuser complete fitting with lamp and all other accessories fitting arrangements including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector, complete all as specified and as directed by Engineer-in-Charge.

BALAJI CONSTRUCTIONS

M/s Verma Construction Company

V K CONTRACTOR

M/S KARTIK BUILDERS