Repair/maint to flooring, joinery, AC sheet with false ceiling and connected B/R repairs with misc works at Zone D area at Old Cantt Allahabad.

Amount

Dismantling of Bricks (laid flat or on edge) or brick tiles in floors, roofs, kerbs, aprons, etc laid bedded and pointed in any mortar complete all as specified and directed.

Demolition of mud/lime concrete from roof not exceeding 200 mm thick including plastering, leaping, vegetation and removing the surplus soil exceeding 250 m and not exceeding 500 m in layers not exceeding 15 cm thick complete all as specified and directed.

Material & Labour for cement concrete 1:2:4, type B-1 using 20mm crushed stone aggregate as in roof padding or in levelling course, benching etc finished even and fair to receive cement mortar screed bed complete as specified & directed.

Material & Labour for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for approachable roofs:- (a) 10 mm thick screed bed or bedding layers in cement sand mortar 1:3 mixed with Integeral water proofing compound @ 3% by weight of cement, Cleaned the roof surface by steel wire brushes brooming & removing all loose particle dirt or dust and surface shall be painted with a coat of bitumen primer [Conforming to IS : 3384-1986] @ 0.30 Litre per Sqm on top of dry or cleaned surface of finished cement mortar plaster suface of roof. (b) Applying a layer of 3 mm thick APP polymeric non-woven polyster matt at core and under surface coated with platic polythene film, weight not less than 3 Kg per Sqm consisting of 90-100 micron thick central core of HMHDPE film over entire area laid with 100 mm over lap side & ends lap and the over lap joints shall be sealed by flame with butane torch. The membrane shall be tucked into grooved on vertical plane and groove sealed with cement sand mortar upto 200 mm heigh on wall sides. Note : The membrane shall have tensile strength of 700 N per Sqcm in longitudunal direction and 450 N per Sqcm in transverse direction at 23 degree centrigrade flow resistance less than 120 degree centigrade dimensional stability less than 0.5 % when tested as per ASTMD 5147 the laying of membrane shall be cariied out in presence of authorised applicator.

Material & Labour for 40 mm thick brick tile laid on cement mortar and joints grouted flush in cement sand mortar in 1:3 mixed with 5% of crude oil by weight of cement over & including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified & directed.

Material & Labour for 40 mm thick brick tile [Except tiles] laid on cement mortar and joints grouted flush in cement sand mortar in 1:3 mixed with 5% of crude oil by weight of cement over & including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified & directed. Note : Serviceable brick tile shall be used from demolition Items here-in-before

Material & Labour for cement concrete 1:2:4, type B-1 using 20mm crushed stone aggregate as in roof padding or in roof kerbs or mud stops rounded or chamfered edges complete as specified & directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding & backing complete and removing of rubbish from site complete all as specified & directed.

Material & Labour for Non Skid Jointless ceramic light coloured tiles 7-8mm thick [premium quality] (square or rectangular) area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqm, laid in floors set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles over & including 15 mm thick Screed bed or bedding layer in cement sand mortar in 1:6 for laying of ceramic tiles complete all as specified & directed.

Material & Labour for Homogeneous Vitrified digital double charge tiles 10 mm thick Light shade (square or rectangular) polished, area of each tiles exceeding 0.36 Sqm and not exceeding 0.42 Sqm, in floors set and jointed with Balendura adhesive or equivalent as approved by GE and pointed in white cement mixed with colouring pigment to match the shade or colour of tiles laid over and including 15mm thick screed bed or bedding layer with CM 1:6 complete all as specified & directed.

Material & Labour for Glazed ceramic coloured tiles [premium quality] as in vertical surface of walls such as skirting / dado and risers to steps, size of tile 450x300mmx7mmm or 350x250x7mm thick set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles over & including 10 mm thick rendering as in backing of tiles in cement mortar in 1:4 complete all as specified & directed.

Material & Labour 18-20mm thick machine cut marble stone slab as in kitchen top of kitchen platform laid over and including cement screed bed or bedding layer 20mm thick in CM 1:4 laid and jointed with white cement mixed with colouring pigment to match the colour of stone slab including making nosing or rounding the outer edge of stone by grinding & rubbing to achived mirror polishing complete all as specified & directed.

Roughnening old concrete surface by picking sweeping clean and washing down with water to remove all dirt or dust particle for laying of concrete for floor works complete as specified & directed by Engineer-in-Charge.

Material & Labour for 100mm thick cement concrete 1:2:4 type B-2 sing 40mm crushed stone aggregate as in hard-standing / paving / path finished even & smooth complete all as specified & directed.

Material & Labour for 75mm thick cement concrete 1:3:6 type C-2 using 40mm crushed stone aggregate as in sub base to floors / paving or as plinth protection finished even & smooth with-out using extra cement complete all as specified & directed.

Taking down cement plaster on brick or stone walls or wall tiles etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish off the premises complete all as specified & as directed.

Material & Labour 10 mm thick rendering on brick walls or concrete surfaces in cement sand mortar 1:4, finished surface even and fair complete all specified & directed.

Material & Labour 15 mm thick rendering on brick walls or concrete surfaces in cement sand mortar 1:4, mixed with water proofing compound finished surface even and fair complete all specified & directed. Note : WPC shall be measured & paid seperately.

Supply only Integeral water proofing compound ISI marked

Material & Labour for 10 mm thick rendering on ceilling surfaces in cement sand mortar 1:4, finished surface even & fair complete all as specified & directed.

Material & labour for two coats of white wash on newly plastered surface of ceilings after preparation of new plastered surface complete all as specified & directed.

Material & Labour for preparation of new plastered surface of walls and rubbing with sand or emery paper and than apply two coats of cement base paint on wall surfaces of approved colour complete all as specified & directed.

Material & Labour for preparation of new plastered surface of walls and rubbing with sand or emery paper and primed with cement primer and than apply two coats of Oil bound distemper [Acrylic] on wall surfaces of approved colour complete all as specified & directed.

Taking down chowket or frame with shutter (without taking off shutters from the frame) area not exceeding 1.5 Sqm each complete all as specified & directed.

Taking down chowket or frame with shutter (without taking off shutters from the frame) area exceeding 1.5 Sqm & not exceeding 4.0 Sqm each complete all as specified & directed.

Taking down shutters area exceeding 1.0 Sqm & not exceeding 2.0 Sqm each complete all as specified & directed.

Material & labour mild steel framed work such as angle iron door frame; grills, gratings with ends of bars shouldered and or riveted, or forged into spikes; framed guard bars, railings, hold fasts & similar work complete all as specified & directed.

Supply & Fixing 35 mm thick factory made second class hardwood plain framed penelled door shutter [two or more panel] with lock rail and panels of 9 mm thick BWP commercial ply or 12 mm veneered particle board medium density with commercial veneering on both faces, size of rail and stile as per IS : 1003 [Part-1] kiln seasoned and chemically pressure treated complete all as specified & directed.

Supply & Fixing 30 mm thick second class hardwood glazed and skelton door shutters, open rebated and prepared to receive glass / gauge etc divided into squares or rectangluar with plain, chamfered or rounded mitered edge beads for securing glass/ gauge complete all as specified in SSR Part 1-1991 section 8 clause 8.24 (a) complete all as specified & directed.

Supply & Fixng 30 mm thick flush door shutters, kiln seasoned ASCU treated, solid core construction, with block board core and ply wood face panels, commercial type ply on both faces complete all as specifed & directed.

Supply & Fixng 25 mm thick flush cup board shutter, kiln seasoned ASCU treated, solid core construction, with block board core and ply wood face panels, commercial type ply on both faces complete all as specifed & directed.

Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be printed to match with prelam sheet reinforced with MS square tube complete all as specified & directed.

Material & Labour for 30 mm thick Factory made PVC solid panel door shutter (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and Plain colour PVC sheet for top & bottom rail, lock rail & bottom rail on either side and as gap insert for top & bottom rail; penelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified & directed.

Supply & Fixng 18 mm thick pre-laminated particle block board exterior grade pre laminated one side with decorative choice lamination and other side balancing white lamination fixed wtih screw as in cup board shutter & shelves complete all as specifed & directed.

Supply & Fixing in repair steel window factory made with side hung shutter including box type hinges with steel handle, steel peg stay with glazing bar, dovetailed or welded joint complete all as specified & directed.

Supply & Fixing in repair steel window factory made with side hung shutter including box type hinges with steel handle, steel peg stay with out glazing bar, dovetailed or welded joint complete all as specified & directed.

Supply & Fixing in repair powder coated [50 micron thick] aluminium door frame with shutter having with door frame of section 62.5x44x2.5 mm thick & shutter with bottom & middle rail of section 112.5x44x2.5 mm thick and styles & top rail of section 83x44x2.5 mm thick with central locking arrangement with & including mortice handle lock of make of Godrej or Link having seven lever and self closing device [Floor door spring by cutting of floor of Sandhu make] with rebate including jointing cleats, fixing builder hardware fittings and glazing with 5.5 mm thick ordinary plain glass including aluminium snap beading & rubber packing and necessary fittings, fixtures complete all as specified & directed.

Supply & Fixing in repair powder coated aluminium window [Sliding type], frame of aluminium section 62.5x37x1.5 mm thick & shutter having styles & rails of section 47.5x44.45x1.5 mm thick including jointing cleats, glazing clips, rubber packing, aluminium snap beading, steel screws, aluminium anodised fitings such as 100 mm buttt hinges, 150 mm tower bolt, 150 mm handle including 5.5 mm thick ordinary plain glass including providing & fixing aluminium checquered grill of anodised section of size 100x100 [diagonally] of 8 mm dia die cast fixed to frame 20x20x5 mm aluminium flat with screws and also including stainless steel wire cloth of 0.36 mm nominal dia of wire and average aparture 1.4 mm complete all as specified & directed.

Supply & Fixing 100mm long mild steel butt hinges medium weight cold rolled with steel pin hinge and fixed with steel screws complete all as specified & directed.

Supply & Fixing 100mm long stainless steel butt hinges with steel pin hinge type B-21 and fixed with steel screws complete all as specified & directed.

Supply & Fixing 125mm long extruded aluminium anodised alloy handle cast type and fixed with screws complete all as specified & directed.

Supply & Fixing 150mm long extruded aluminium anodised alloy handle cast type and fixed with screws complete all as specified & directed.

Supply & Fixing 150mm long extruded aluminium anodise alloy barrel tower bolt fixed with screws complete all as specified & directed.

Supply & Fixing 200mm long extruded aluminium anodise alloy barrel tower bolt fixed with screws complete all as specified & directed.

Supply & Fixing aluminium alloy anodized sliding door bolt with hasp & staple (clip & bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 250mm long complete all as specified & as directed.

Supply & Fixing 300 mm long mild steel, ordinary rat tail rod pattern door spring including roller and roller plate fixed on door with screws complete all as specified & directed.

Supply & Fixing 100mm size aluminium hasp staple safety type including bolt to hinges plate and fixed with screws complete all as specified & directed.

Supply & Fixing contineous piano hinges mild steel bright finished or electrogalvanised pin hinges fixed with screws on cup board shutter width of flap when open 30 mm complete all as specified & directed.

Supply & Fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm fixed with tinned tacks or galvanised wire staples complete as specified & directed.

Supply & Fixing in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm fixed with tinned tacks or galvanised wire staples including taking out old damaged wire cloth any type complete as specified & directed.

Material & Labour for running welding in repair not exceeding 2.5 CM in length and thickness of metal upto 6 mm thick complete as specified & directed.

Supply & Fixing 3mm thick sheet glass plain ordinary quality and glazing with oil putty in a square not exceeding 0.5 Sqm in each pane complete all as specified & directed.

Supply & Fixing 3mm thick figured sheet glass plain ordinary quality and glazing with oil putty in a square not exceeding 0.5 Sqm in each pane complete all as specified & directed.

Material & Labour for preperation of new wood or wooden based surface with sand or emery paper of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified & directed.

Material & Labour for preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified & directed.

Supply & fixing in repair door closer hydraulically regulated designation No-2, universal type, suitable for door shutters of weight between 40 Kg to 60 Kg of aluminium (Die cast) body complete all as specified & directed.

Taking down aluminium door or window shutters fron frame area exceeding 1 Sqm & not exceeding 2.5 Sqm each and re-fixing in same opening after repaior of parts sich as clip, easing, rubber beads, including replacement of middle rail, top rail and handles& locking arrangement for smooth functioning complete as specified & directed. Note : Quoted rate inclusive with replacement of any parts for required for smooth functioning and not any claim entertained on this account.

Demolition of brick work built in cement & sand mortar including all quoin, arches, pillars etc & removing rubbish from site complete all as specified and directed.

Material & Labour for brick work in half brick thick wall with fly ash bricks [crushing strength not less than 75 Kg per Sqcm] built in cement sand mortar 1:4 complete all as specified & directed.

Demolition of Cement Concrete work [Un-reinforced] in ground floors or paving not exceeding 15 cm thickness and removing rubbish from site as directed by Engineer-in-Charge.

Material & Labour for Providing water proofing treatment in the sunken floor of bathroom with preparing surface by brushing with wire brushes for removing loose dirt or dust particle and applying APP modified water proofing memberane comprising of the following:- (a) 10 mm thick rendering or screed bed or bedding layers in cement sand mortar 1:3 mixed with Integeral water proofing compound @ 3% by weight of cement, Cleaned the surface by steel wire brushes and surface shall be painted with one coat of bitumen primer [conforming to IS : 3384-1986] @ 0.30 Litre per Sqm on top of dry or cleaned surface of finished cement mortar plaster suface of roof. (b) One coat of hot blown bitumen of grade 85/25 @ 1.2 Kg per Sqm shall be applied over primed surfaces for pasting of water proofing membrane. (c) Applying a layer of polymeric water proofing membrane of weight not less than 3 Kg per Sqm consisting of 90-100 micron thick central core of HMHDPE film over entire area laid with 100 mm over lap side & ends lap and the over lap joints shall be sealed by flame. (d) Again applying one coat of hot blown bitumen of grade 85/25 @ 1.2 Kg /Sqm & blinded with dry coarse sand spreaded @ 0.5 to 1 Kg per Sqm on entire surface of roof over bitumen.

Material & Labour PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in filling in sunken floors or mass concrete or similar work complete all as specified & directed.

Taking out old rusted or damaged 15 mm bore galvanised steel water tubing & connections for cleaning or re-fixing if required complete all as specified & as directed.

Taking out old rusted or damaged 20 mm bore galvanised steel water tubing & connections for cleaning or re-fixing if required complete all as specified & as directed.

Supply & Fixing 15 mm bore galvanised steel water tubing medium grade for water supply pipes & connections with all fittings such as sockets, elbows, unions, Tees & short length etc, and fixed to walls with steel hooks or laid in floors in any length complete all as specified & as directed.

Supply & Fixing 20 mm bore galvanised steel water tubing medium grade for water supply pipes & connections with all fittings such as sockets, elbows, unions, Tees & short length etc, and fixed to walls with steel hooks or laid in floors in any length complete all as specified & as directed.

Supply & Fixing in repair vitreous china wash hand basin white flat back of size 550x400mm including chain & plug and porcelain stopper but including angle iron brackets, PVC waste pipe, chromium plated waste coupling 32 mm dia long shank complete as specified & directed.

Supply & Fixing in repair 15mm bore Pillar tap cast copper alloy fancy type swan neck type chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes complete all as specified & directed.

Supply & Fixing in repair sink with out drainage board made of stainless steel 1 mm thick sheet with plugs, washer, waste pipe 40 mm bore 600 mm long or CP waste coupling 40 mm bore, rest on steel brackets or on dwarf wall overall size 495 mm x 420 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified & directed.

Supply & Fixing in repair cover for water tank of suitable size of water tank of capacity 500 Lit or 1000 Lit capacity with hingeing device complete all as specified & directed.

Supply & Fixing in repair 15mm bore bib tap cast copper alloy fancy type chromium plated with capstan head handle screwed down for iron pipes or for brass ferrule complete all as specified & directed.

Supply & Fixing in repair 15mm bore bib tap long body cast copper alloy fancy type chromium plated with capstan head handle screwed down for iron pipes or for brass ferrule complete all as specified & directed.

Supply & Fixing in repair 15 mm bore Angle Valves brass chromium plated screwed down high pressure with capstan head handle screwed both ends for iron pipe or for unions complete all as specified & directed.

Supply & Fixing in repair 15mm bore stop valves chromium palted cast copper alloy screwed down high pressure with capstan headed handle fancy type, screwed both ends for securing iron pipe or for union complete all as specified & directed.

Supply & Fixing in repair chromium plated shower rose fancy type with swivel joints fixed to 15mm bore pipe complete all as specified & as directed.

Supply & Fixing 10 litre capacity PVC valveless syphonic action type low level flushing cistern white colour including 32 mm bore flush pipe, cantilever brackets PVC ball valve, float and PVC handle, PVC connection 15mm dia 450 mm long complete all as specified & directed.

Supply & Fixing PVC connection 15mm size with PTMT nuts on both ends of length 450mm complete all as specified & directed.

Supply & Fixing in repair vitreous china squatting pan white orissa pattern of size 580 x 440 mm with Integral foot rest (excludig flushing cistern & flush pipe) with VC trap and make good to match with the existing surface of floor complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repair vitreous china water closet pedestal pattern (excluding flushing cistern & flush pipe) and making good to match with the existing surface of floor including PVC white colour plastic seat cover with steel pin hing fixed complete all as specified & directed.

Supply & Fixing in repair stainless steel kitchen plate rack (utensil rack) of size 750mm x 900mm and 300 mm depth made with 0.63 mm thick stainless steel sheet fixed with steel screw including necessary fittings, nut / bolts, washer including hanging on wall with steel screws with rawal plug complete all as specified & directed. Make & Model : KPR-310 of Blue Star or P-310 of Prayag

Supply & Fixing in repair 25 mm dia fancy type draphery or curtain rods PVC coating with ends brackets decorative type cut to length as required size, colour coating including matching socketed brackets with PVC rings [eight numbers in each RM] complete all as specified & as directed.

Supply & Fixing in repair cast iron soil waste or vent pipe 100 mm internal dia of pipe in any length with or without ears joints with cement joints fixed in walls with MS clamp of suitable size fixed on walls including taking down old damaged rusted pipe of any type and removing from site complete all as specified & as directed.

Supply & Fixing in repair cast iron soil waste or vent pipe 75 mm internal dia of pipe in any length with or without ears joints with cement joints fixed in walls with MS clamp of suitable size fixed on walls including taking down old damaged rusted pipe of any type and removing from site complete all as specified & as directed.

Supply & Fixing in repair cast iron bends of 100 mm intenal dia with duck foot or heel rest ISI marked jointed with cement sand mixed with spun yarn complete all as specified & as directed.

Supply & Fixing in repair 32 mm bore steel chromium plated bottle trap suitable for wash hand basin with inlet and out let screws for pipe or connection including necessary packing union and cap and fixed in pipe complete all as specified & as directed.

Taking down old loose plaster form edges or bottom of chajjas or corner where steel reinforcement are visible and cleaned the entire surface with water and apply neat cement slurry on entire surface of chajjas or on open steel reinforcement binding with steel wire and material & labour rendering with cement sand mortar in 1:3 including necessary form work or scafolding if required to entire satisfaction of Engineer-in-Charge complete all as specified & directed. Note : Necessary steel wire & form work or scafolding if required shall be made by contractor included in quoted rate.

Supply & Fixing in repair health faucet of chromium plated with flexible threaded tube 1400 mm long bothe ends fitted of suitable devices on EWC pan complete all as specified & directed.

Supply & Fixing in repair chromium plated JET with flexible threaded tube 1400 mm long bothe ends fitted of suitable devices on EWC pan complete all as specified & directed.

Supply & Fixing in repair 600 mm long 20 mm dia "D" type chromium plated tubular towel rail between flanges fixed with steel screws complete all as specified & directed.

Supply & Fixing in repair suspended false ceiling using E-board of Make : Everest or equivalent make approved design "Lake & Hill" of size of grid 605mm x 605mm x 4 mm thick white pre-laminated self embosed, texture designed board, water resistant, fire resistant & termite resistant for Insulation and accoustic purpose to be placed on at any height on hot dipped galvanised iron imposed grid with 24 mm wide T section powder coated, the frame work shall comprises of main runner made with 0.33 mm thick GS sheet and of size 24x32x300mm spaced at 1200 mm maximum centre to centre fixed to structral soffits with hangers of 4 mm dia GI wire to be fixed with rawl plugs, adjusted with screws, flush fittings of 1200 mm long cross Tee with double stiching to be interlocked between main runners at 450 mm c/c from cross Tee more than 600 mm to be suported independently and double to be formed by fittings 600 mm long cross tee centrally between the 1200 mm cross tee, perimeter wall angle shall be of 0.45 mm thick GS sheet of size 19x19 mm and 300 mm long of white colour including making hole in board for provison of light fittings complete all as per manufacturer Instructions & as directed.

Supply & Fixing in repair PVC (SWR) floor / nahani trap 75 mm dia of out let plain with CP grating jointing with cement solvant or adhesive and fixed with PCC 1:2:4 using 20 mm stone aggregate complete all as specified & directed.

Supply & Fixing in repair rubber door seal 32 mm wide with aluminium strip of size 18 mm wide fixed with screw with washers complete all as specified & directed. Note : Beta or equivalent as approved

Dismantling of Asbestos cement (corrugated or semi corrugated) sheets as in roof coverings including ridges complete all as specified & directed.

Material & Labour for 6 mm thick asbestos cement corrugated or semi corrugated sheet as in roof covering, walls etc fixed with L or J type hooks or cranked bolts complete all as specified & directed.

Fixing only old serviceable asbestos cement corrugated or semi corrugated sheet as in roof covering, walls etc fixed with new L or J type hooks or cranked bolts complete all as specified & directed. Note : Old serveciable sheet shall be used obtain from Items here-in-before / after.

Material & Labour for asbestos cement two piece adjustable serated plain wing ridge fixed with 'L' or 'J' hooks or cranked hook bolt complete all as specified & directed.

Cleaning of over head tank any type PVC or RCC of capacity 500 with bleaching powder or any detergent powder clean the internally surface with entire satisfaction of Engineer-in-Charge complete all as specified & directed.

Cleaning of over head tank any type PVC or RCC of capacity 1000 with bleaching powder or any detergent powder clean the internally surface with entire satisfaction of Engineer-in-Charge complete all as specified & directed.

Supply & Fixing in repair 15mm bore bib tap PTMT standard high pressure screwed for galvanised iron pipe and fixed at site weight of tap not less than 90 grams complete all as specified & directed.

Supply & Fixing in repair 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed complete all as specified & directed.

Supply & fixing in repair 15 mm bore gun metal gate valve with iron wheel head screwed both ends complete all as specified & directed.

Supply & Fixing in repair vitreous china urinal flat back white colour of size 465x355x265 mm with & including 32-40 mm CP waste coupling, PVC flexible discharge / waste pipe socketed end including connection to flushing pipes and out going pipes & including fixing plugs, securing & bedding urinal in walls in cement sand mortar complete all as specified & directed.

Supply & Fixing in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with clamps complete all as specified & as directed.

Supply & Fixing in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with clamps complete all as specified & as directed.

Supply & Fixing 110 mm bore PVC (SWR) bends ISI marked with oval & accessed door of any radius jointed with cement solvent or adhesive complete all as specified & as directed.

Supply & Fixing 75 mm bore PVC (SWR) bends ISI marked with oval & accessed door of any radius jointed with cement solvent or adhesive complete all as specified & as directed.

Supply & Fixing in repair bathroom cabinet made with hard thermostate palstic of size 450x350 mm fitted with steel bracket or plastic cleats, superior quality distortion free having 4 mm thick looking mirror of best quality openable with steel hinges complete all as specified & directed.

Supply, hoisted & fixing in positon in repair 500 Litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) including necessary connections to inlet outlet & wash out pipes, one number 20 mm float valve of PTMT complete all as specified in SSR Part-I complete all as specified & directed.

Supply, hoisted & fixing in positon in repair 1000 Litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) including necessary connections to inlet outlet & wash out pipes, one number 20 mm float valve of PTMT complete all as specified in SSR Part-I complete all as specified & directed.

Supply & fixing in repair double action floor door spring hydraulically regulated made with minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified & directed.

Supply & fixing in repair mortice Lock Four Lever vertical type of size 75 mm with all fittings for fixing in aluminium door complete all as specified & directed.

Supply & fixing in repair mild steel handle or peg stay for steel window fixed with nut bolt of mild steel fixed in steel window complete all as specified & directed.

Supply & fixing in repair door stopper of aluminium body and tongue anodised with rubber shoe fixed on door shutter with screws complete all as specified & directed.

Shivagya Engineering

AMARDEEP ENTERPRISES

Airways Enterprises

M/S Akhilesh Enterprises

Ram Babu Bros

M/s Rahul Kumar Agrawal

R.K.ASSOCIATES

M/S Satyam Associates