Annual repair to Residential Quarters (Type-A) GJAI colony at Madhuban area

Amount

Dismantlimg & removing of the following old damaged items as per the reqiurment at site at any height upto any floors including scaffolding, disposing the same at specified place including supplying of all labours, materials, T&P etc all complete as per the direction of Engineer-in-charge.(Excluding GST).

Plastering (For all Floors).

A.S. flooring

Brick work.

Old damaged grading from roof surface.

R.C.C. member.

Brick work in Fly Ash Bricks of size 25Cm X 12Cm X 8Cm and having crushing strength not less than 75 Kg/Cm² to 99Kg/Cm with C.M (1:6) including splay / cutting, racking out the joints curing, hoisting, staging at any height with cost and supply of all materials, labour, T&P, tollage, royalties, taxes, staging, scaffolding, curing, water charges all transportation charges etc. all complete & as per direction of Engineer-in-charge. (Excludicng cost of GST).

In super structure

in foundation & plinth

in 3rd floor

12mm thick Cemnet Plastering with CM(1:6) proportion, over brick work including racking out the joints, finished smooth to the exposed surface, rounding thecorners wherever found necesary including cost & supply of all materials, labour, T&P, staging scaffolding, watering, curing, taxes, tollage, royalties, etc. complete as directed by Engineer-in-charge.(Excluding GST).

25mm. thick A.S. flooring in cement concrete (1:2:4) at all floors & levels using 12mm. and down grade hard granite chips of approved quality including mixing, hoisting, laying, consolidating, curing, by water tanker, finished smooth to the exposed surface with a floating coat of cement punning, rounding the corners where found necessary including cost of supply of all materials, labour, T&P, taxes, tollage, royalties, transportation charges, etc. complete & as per direction of Engineer-in-charge.(Excluding GST)

Supplying of 110mmΦ PVC pipe(ISI make) with all fittings of required length including removing /dismantling the damaged/broken portion of pipe & fixing the same in position with PVC clamp, bobbin, brackets with leak proof joints, etc with supply of all labour, T&P, etc. as directed by Engineer-in-charge.(Excluding GST)

R.C.C(1:1.5:3) for R.C.C. works using 12mm to 20mm size H.B.G. chips for all floors, foundation & plinth etc. of approved quality, mixing as per approved design mix, hoisting, laying, compacting, curing including centring & shuttering with cost and supply of all materials, labour, T&P, taxes, tollage, royalties, laboratory charges for performing design mix & testing as per relevant IS code etc. all complete as directed by Engineer-in-charge..(Excluding GST).

Rigid smooth leak proof centring & shuttering for RCC work with Ply/Steel plank & bullah of approved quality in all areas as per requirment of site at any height & de-shuttering the same after prior period of concrete setting including supplying of labours, materials, scaffolding, T&P all complete as per the direction of Engineer-in-charge..(Excluding GST).

Reinforcement to R.C.C. works with supply of Fe-500 steel SAIL/VIZAG/RINL/TISCON or equivalent as per relevant I.S. & cutting bending, binding straightening of M.S. Tor Steel/Coil tying the grills and placing the grills in position including supply of 18 gauge binding wire with supply of all materials, labour, T&P, all taxes, etc. complete as directed including cost of steel.(No wastage shall be paid. Steel coefficient should be as per IS 1786).(Excluding GST).

Dry brick khoa rammed to 10Cm. thick using K.B. Brick khoa, laying to proper level slope, watering, ramming to level, to receive A.S. Flooring including cost and supply of all materials, labour, T&P, taxes, etc. complete as per direction of Engineer-in-charge. (Excludicng cost of GST)

Dismantling and removing the old damaged shutters, chaukaths, ventilators, shutters with frames including removing the fastenings, depositing the dismantled unusable materials at departmental store with cost supply of all labour, T&P, staging, scaffolding, all transportations etc. Complete & as directed by Engineer In-Charge..(Excluding GST).

Taking out the door and window shutters and refixing them including screws as may be required etc. complete as directed by Engineer in charge. ( excluding GST)

window

Repairing of old damaged door/window Supply of 32mm thick seasoned Non-Sal/Hard wood paneled Door/window shutters as is where required having both side styled moulded having bottom rail of 200 mm thick,top rail 100mm thick , middle lock rail 200 mm thick alongwith straight vertical moulded style of 125mm width (total 2 panels) and panel should be 20 mm thick piasal plank embedded 16mm to styles & rails with one no of aluminum aldrop of size 300mm x 16mm x 40mm, two nos of 150 mm with 175mm x 40mm flat aluminum handles, 2 nos. of 200 mm x 10mm aluminum tower bolts and required numbers of wooden hinged cleats, fixing at position etc all complete . including cost of all materials, labour, loading & unloading Charges, all taxes, transportation charges, stacking at site store etc. all complete as directed by Engineer In-Charge.(Excluding GST)

Suplying, fitting & fixing of Mosquito proof net ( Netlon ) of approved quality for window & ventilator after removing the damaged nets , changing with new net fixed to proper position by stiching male female velcro tape all complete including removing of existing old damaged frame from position,all complete including cost & supply of all materials, nail, labour, T&P, taxes, transportation, removing the existing old frames from position etc. as per direction of Engineer- in- charge.Excluding GST.

Supplying, fitting, fixing of Mosquito proof net door shutter made out of seasoned piasal wood (32mm X 75mm Size) batten for style, top rail, bottom rail, lock rail with mosquito proof net ( plasto net 20mm X 20mm square mesh )/ (Netlon insect screens 20mm X 20mm square mesh) of approved quality , make with wooden beading ,nail and fixed the new frames with all aluminium Handles, tower bolts, stainless steel hinges of approved size, quality etc. all complete including cost & supply of all materials, nail, labour, T&P, taxes, transportation, removing the existing old frames from position etc. as per direction of Engineer- in- charge.Excluding GST.

Supplying fitting & fixing of salwood choukath with cost of loading & un-loading stacking at departmental stores all complete including cost and supply of all materials, T&P, all taxes, transportation, etc. complete as per direction of Engineer-in-charge..(Excluding GST).NB: Without painting.

Supplying, fitting, fixing up AL window (sliding type) made up aluminum Section 9778 as window fram, section No. 4095, 4096 & 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer in charge. Excluding GST

Factory made single/double leaf rigid FRP sand which composite door shutter of 32mm./1 mm. thick laminated with two FRP skin with wood grain finish fabricated using U.V. stabilized Isopthalic Gelcoat and one layer of 450 GSM E-Glass chopped Strand Mat (CSM), impregnated with orthopthalic polyster resin. The thickness of the skins will not be less than 1.5mm. Expanded Polystyrene (EPS) structural form panel of 29mm. thickness and a density of 20 Kg./Cu. Mtr shall be used as core material. Wooden reinforcement made of seasoned Sal wood blocks of cross section not less than 27mm. x 38mm. and also necessary Sal wood reinforcement for fixing the metal fitting such as tower bolts, aldrops, handles etc. shall be provide. A material, the Sal wood reinforcement & the skins. with supply of all materials, labour, T&P, taxes, transportation, etc. all complete as per direction of Engineer-in-charge..(Excluding GST).

Factory made FRP Door frames of 75mm. x 100mm. or 70mm. x 120mm. size shall be fabricated using E-Glass Chopped Strand Mat (CSM), U.V. stabilized Isopthalic Gelcoat & impregnated with Isopthalic resin. The thickness of the FRP skin shall not be less than 2.0mm. The Door frame will consist of three segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in & with joined together by means of screws. The FRP frame shall be provided with wooden reinforcement of 6 locations for high screw holding capacity for fixing metallic hold fast & shall be consolidated by filling with plaster of pairs with fibre reinforcement with supply of all materials, labour, T&P, taxes, transportation, etc. all complete as per direction of Engineer-in-charge. .(Excluding GST).

Supplying of following items including cost and supply of all labour, all fittings, T&P, all taxes, transportation from departmental stores to work site etc. all complete as per direction of Engineer-in-charge. etc. (Excluding GST).

Wooden Fittings.

12mm BWR ply Wood (ISI)(2.25mm x 1.20mm)

19mm BWR ply Wood (ISI)(2.25mm x 1.20mm)

6mm BWR Ply Wood (ISI (2.25mm x 1.20mm)

9mm BWR Ply Wood (ISI) (2.25mm x 1.20mm)

Stainless Steel fittings

handle (125mm x 175mm x 40mm flat)

handle (100mm x 150mm x 33mm flat)

handle (75mm x 150mm x 33mm flat)

tower bolt barrel type (150mm x 10mm)

tower bolt barrli type (100mm x 10mm)

aldrop (15mm x 300mm long)

hinges (125mm x 75mm x 4mm)

hinges (100mm x 50mm x 4mm)

hinges (75mm x 63mm x 4mm)

hinges (50mm x 35mm x 3.2mm)

300 X 16 mm Aldrop (Stapple)

Paint items

Wood primer

Red oxide primer

Enamel paint

Miscellanious items

Wair nail (1/2" to 4")

Stainless butt hinges (75mm x 47mm x 0.70mm)

Fevicol

5mm thick plain/frosted colour glass

Cement

sweet sand

Oxidised Mild Steel screws 50mm

Oxidised Mild Steel screws 40mm

Oxidised Mild Steel screws 30mm

Oxidised Mild Steel screws 25mm

Oxidised Mild Steel screws 20mm

Factory made PVC rigid foam sheet 5 mm thick

ArmGrout Inject Epn ( Two Part Epoxy Resin For Grouts )

supply of SIKA make TOP SHEILD 109

Supplying, fitting, fixing of MS welded grills, fabricated with suitable M.S angle and flat, welded to proper shape , size & design fixed to position with screws, nails and grouting to walls in C.C (1:2:4) including cutting grooves in walls and making good the damages with cost and supply of all materials, labour, T&P, taxes, transportation, welding charges , grinding, staging, scaffolding, curing etc. all complete as per the direction of Engineer in charge.(Excluding GST).

Painting to interior wall surface with oil bound distemper paint of approved quality shade preparing the surface sand papering, applying paint uniformly including cost and supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc. complete and as per direction of Engineer-in-charge. .(Excluding GST).

One coat

two coats

Enamel painting one coat to wood/iron work of approved quality & shedover a coat of primer after scrapping, sand prepering & cleaning the surface & filling the joints & holes with putty(bolied or raw) where found necessary before paint including all cost, supplying of all labour, materilas, T&P, scaffolding at any hight all complete as per the direction of Engineer-in-charge..(Excluding GST).

Removal & uprooting of wild vegetation , unwanted plants from residential/non-residential buildings ( From roof cornice, parapet,chajja, Head room , top of roof slab, wall ,junctions of water supply & sanitary pipes etc.) with supply of all labour ,T&P,staging,scaffolding removal of debrises from site & disposing same with intial lead & lift.all complete as directed by Engineer In-Charge.(Excluding GST) ..Payment will be made considering 12 units as a block.

Providing and applying Modified flexible Cementious waterfroofing coating with AquaArm UM or equivalent with two component solvent free waterfroofing compound after scrapping and properly cleaning the surface to remove loose particles,oil, greese,dirts, rusts or other coatings with water jetting, cleaning the loose particles with air blower and wire brushes , applying the two component water froofing compound in two coats ( Mixing 2 parts of powder : 1 part of Liquid ) complete in all respect as per the direction of Engineer-in-Charge. Excluding GST.

Providing & fixing of 32mm thick factory made paneled hard wood door,windows, made out of duly seasoned & treated hard woods. The Styles, Rails & Intermediate rails are kiln seasoned as per IS-1141, ASCU Chemically pressure treated as per IS-401, Panels are also seasoned and chemically pressure treated made out of hard wod as per IS-1003/Part-I & II . Necessary fitting & Fixtures to fix the shutters inposition with Screws of stainless steel et. with cost of loading & un-loading stacking at departmental stores including dismantalling the damaged shutters and depositing the old/damaged/dismantted shutter at section office with supply of all labour, materilas ,T &P, all taxes, transportation, etc. complete as per direction of Engineer-in-charge.(Excluding GST)

Making lead caulked joints to C.I. Pipe and special as per specification including making lead jointing caulking, gasketing and testing the joints and supply of lead, Gasket, fire wood, cost and conveyance of all materials required for the work and all labour, T&P, taxes, etc. all complete and testing the pipe as per direction of Engineer-in-charge (Excluding GST).

100mm dia. Lead joint

150mm dia. Lead joint

200mm dia. Lead joint

250mm dia. Lead joint

300mm dia. Lead joint

450mm dia. Lead joint

Cleaning of chocked ferrule points ( excluding fittings )& replacing of G.I fittings if necessary as per site condition including earth work excavation and refilling with labour, T&P checking the pipe line to ensure no leakage on resuming to required pressure with mending good to damages etc. all complete as per direction of Engineer-in-charge.(Excluding GST)

Cleaning of O.H. tank of multistoried building, cleaning the deposited silt inside the tanks by aid of pans & vessels & brushing the interior surface by soft brushes using bleaching / surf wash for germ free as per direction with supply of all labour & pumping out water by diesel pump with hire & running charges of pump including cost of fuel & operator scaffolding upto any height if required etc complete as per direction of Engineer-in-charge.(Excluding GST)

Supplying of following PH materials of good quality with ISI mark with all transportation loading & unloading at both ends with all taxes, tollage, royalty etc. Complete & deposited in the section store as per direction Engineer-in-charge.(Excluding GST)

Porcelain hand wash basin (parryware/Hindware/Hindustan)(16" x 22")

Porcelain standard pedestal for H.W basin (Hindware)

15mm dia C.P Pillarcock (Plaza/Amber)

32 mm CP waste

32 mm steel sink waste

40 mm CP waste

50mm CP waste

32mm PVC Waste pipe

40mm pvc waste pipe

50mm pvc waste pipe

15mm Connection pipe (PVC/CP)

Porcelain kitchen sink (24' x 18" X10" )(Hindware/Parryware/Johnson)

Steel Kitchen Sink (24x18x10)cm (Hindware/Parryware/Johnson)

5mm thick bevelleged plate glass mirror 24" x 18" size with masonite board and mirror screw.

50mm G.M.F.W.V

40mm. G.M.F.W.V

25MM G.M.F.W.V

20mm G.M.F.W.V

15mm G.M.F.W.V

10 ltr capacity PVC low level cistern (Slimline)

Soap Holder

100mm dia shower

20mm dia 60cm long towel rail

C.P Glass self (600x125) with glass

CP self

150mm/100 mm dia C.I/CP. Grattings

15mm dia symet ballcock(Rod with ball)

15mm dia C.P stopcock(Amber/Plaza)

20mm dia C.P stopcock(Amber/Plaza)

20mm dia C.P concealed stopcock(Amber/Plaza)

15mm dia C.P angle stopcock(Amber/Plaza)

15mm long body C.P. Bib cock(Plaza)

15mm CP Bibcock (Plaza / Amber).

15 mm dia Symet bibcock (Prayag))

15mm dia PVC pillar cock (Prayag)

Cistern washer

PVC washer

Long Flush bend for Cistern

C.P Towel ring

White cement

M-seal

25 mm GI tank nipple

Basin rack bolt

CP extension piece

Hacksaw blade

Porcelain 23" IWC ( Orissa Pan)

Porcelain 20" IWC ( Orissa Pan)

Commode (p-trap) EWC/AWC with cover

Commode (s-trap) EWC/AWC with cover

commode sheet cover and clamp (Parryware)

commode with cistern( Hindware)

2000 ltrs capacity (PVC-3 core white colour Sintex Make)

1000 ltrs Capacity (PVC-3 core white colour Sintex Make)

Supply of G.I Pipes (Medium Quality)/PVC pipes (Sch-80) of different dia. with ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST).

15mm Dia. G.I pipe (TATA/JINDAL)

20mm Dia. G.I pipe (TATA/JINDAL)

25mm Dia. G.I pipe (TATA/JINDAL)

40mm Dia. G.I pipe (TATA/JINDAL)

50mm Dia. G.I pipe (TATA/JINDAL)

15mm UPVC Pipe (Supreme/Oriplast)

20mm UPVC Pipe(Supreme/Oriplast)

25mm UPVC Pipe(Supreme/Oriplast)

40mm UPVC Pipe(Supreme/Oriplast)

50mm UPVC Pipe(Supreme/Oriplast)

Supply of U-PVC fittings of different dia. of medium quality as per ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST)

15mm Dia. U-PVC union

20mm Dia. U-PVC union

25mm Dia. U-PVC union

40mm Dia. U-PVC union

50mm Dia. U-PVC union

15mm Dia. U-PVC elbow

20mm Dia. U-PVC elbow

25mm Dia. U-PVC elbow

40mm Dia. U-PVC elbow

50mm Dia. U-PVC elbow

15mm Dia. U-PVC tee

20mm Dia. U-PVC tee

25mm Dia. U-PVC tee

40mm Dia. U-PVC tee

50mm Dia. U-PVC tee

15mm Dia. U-PVCsocket

20mm Dia. U-PVC socket

25mm Dia. U-PVC socket

40mm Dia. U-PVC socket

50mm Dia. U-PVC socket

15mm Dia. U-PVC MTA ( Brass Threaded)

20mm Dia. U-PVC MTA( Brass Threaded)

25mm Dia. U-PVC MTA( Brass Threaded)

40mm Dia. U-PVC MTA( Brass Threaded)

50mm Dia. U-PVC MTA( Brass Threaded)

15mm Dia. U-PVC FTA( Brass Threaded)

20mm Dia. U-PVC FTA( Brass Threaded)

25mm Dia. U-PVC FTA( Brass Threaded)

40mm Dia. U-PVC FTA( Brass Threaded)

50mm Dia. U-PVC FTA( Brass Threaded)

15mm PVC Ball Valve

20mm PVC Ball Valve

25mm PVC Ball Valve

40mm PVC Ball Valve

50mm PVC Ball Valve

U-PVC Paste

Thread tape

Supply of G.I fittings of different dia. of medium quality as per ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST).

15mm Dia. G.I socket

20mm Dia. G.I socket

25mm Dia. G.I socket

40mm Dia. G.I socket

50mm Dia. G.I socket

20mm G.I. RS.

25 mm G.I. R.S

40 mm G.I. RS

40 mm Dia. G.I union

25mm Dia. G.I union

20mm Dia. G.I union

15mm Dia. G.I union

15mm Dia. G.I elbow

20mm Dia. G.I elbow

25mm Dia. G.I elbow

40mm Dia G.I elbow

50mm Dia G.I elbow

20mm Gl Reducer elbow

25mm G.I. Reducer elbow

40mm G.I Reducer elbow

15mm Dia. G.I tee

20mm Dia. G.I tee

25mm Dia. G.I tee

40mm Dia. G.I tee

50mm Dia. G.I tee

50mm G.I. reducer Tee

20mm G.I reducer Tee

20mm Dia. G.I S.P.

15mm Dia. G.I S.P.

25mm Dia. G.I S.P.

40mm Dia. G.I S.P.

50mm Dia. G.I S.P.

15mm Dia. G.I Plug

20mm Dia. G.I Plug

35 x 3mm M.S. Screw

Cleaning of sewerage line, septic tanks (Big & small) man hole, I.C., soak-way pit & disposing sewerage sludge & burring in a pre-digged pit near by & closing with local earth with supply of all labour, T&P, pump including hire & running charges of pumps all taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST)

Man holes

Inspection Chamber

Gresase Chamber.

Small size Septic tank.

Big size Septic Tank.

Labour charges for dismantalling of IWC/ EWC/AWC/OWC holes in brick/ conc. work supply of fitting & materials with socket & screw joints including cutting threads to pipe, pipes to length including earth work excavation of all types of soil, required scaffolding & refilling the trench after the work & fixing of pipe line in wall with clamps of providing light barriers with supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST)

Labour charges for fitting & fixing of IWC/ EWC/AWC/OWC holes in brick/ conc. work,making flooringwith CC(1:2:4) and neat cement finish with supply of fitting & materials with socket & screw joints including cutting threads to pipe, pipes to length including earth work excavation of all types of soil, required scaffolding & refilling the trench after the work & fixing of pipe line in wall with clamps of providing light barriers with supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST)

Labour charges for laying of PVC pipes and other PH materials laid on wall or under graund including dismantling , cutting holes in brick/ conc. Work supply of fitting & materials with socketand screw joints including cuttingthreads to pipe, pipes to length including eachworkexcavation of all types of soil,required scaffolding & refilling the trench afterthework andfixing of pipeline in wall with clamps of providing light barriers withsupply ofall labour ,T&P taxes etcall complete as per direction of Engineer in charge(Excluding GST)

Laying of 15mm to 25mm. Dia pipe.

Laying of 40mm to 50mm. Dia pipe.

Supplying the following HCI/PVC pipes and fittings of different dia with ISI mark (Supreme) including loading and unloading at both ends with all cost of materials,labours,T&P,,taxes,royalties etc.Allcomplete as per direction of engineering in charge. (Excluding GST)

110mm PVC Pipe

75mm PVC pipe

110mm PVC door bend

110mm PVC plain bend

110mm PVC P trap

110mm PVC S/J with door

110mm PVC D/J with door

110mm PVC offset

75mm PVC door bend

75mm PVC plain bend

75mm PVC S/J with door

75mm PVC D/J with door

75mm PVC Cowl

110mm PVC Cowl

75mm PVC Clamp

110mm PVC Clamp

Bamboo

Engagement ofHydraulic Excavator of 1cum bucket for each work excavation during execution of work including supply of operator,fuel tools and plants etc all completeas directed by engineering in charge.(Excluding GST)

Exterior painting two coats to wall surface with acrylic based weather coat paint of approved quality & shade having resistance to Fungus, Fading, including scraping, cleaning, brushing, washing the old paint, as and when required, removing the flakes applying uniformly two coats including cost and supply of all materials, labour, T&P, taxes, transportation, staging, scaffolding, etc. complete but excluding cost of GST as directed by the Engineer-in-charge. Excluding GST.

Supplying fitting fixing of 8mm thick ceramic floor tiles ( premimum Quality 300 x300 mm or 400 x 400 mm size)in 1st floor, treads or steps and landing on 20 mm thick bed of cement mortar 1:4(1cement: 4 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and cleaning complete including supply of all labour material taxes tollage etc all complete but excluding GST as per direction of Engineer in charge.

Engagement of Tractor for shifting of sludge, debrises from one place to other etc. with fuel, engagement hire & running charges, cost of operator, etc. all complete as per direction of Engineer-in-charge only engagement perod will consided, no idle charge will be considered (Excluding GST).

Ms Gangadhar Jena

Maa Dakhinakali Enterprisers

Padmanav Lenka

JISHU KRISHNA NAYAK

Utkarsh Infra and Projects

M/s BABA BISWANATH CONSTRUCTION