Establishment of Infrastructure for IMRH Facility comprising of Construction of GTV TRWT Mobile Sheds along with Associated Buildings comprising of Civil Electrical and Mechanical Works for IMRH Project at Doddanekkundi Area Package II at RWRDC Division HAL DC

HINDUSTAN AERONAUTICS LIMITED BANGALORE FACILITIES MANAGEMENT DIVISION

NAME OF THE WORK: Establishment of Infrastructure for IMRH Facility comprising of Construction of GTV, TRWT, Mobile Sheds along with Associated Buildings comprising of Civil, Electrical and Mechanical Works for IMRH Project at Doddanekkundi Area [Package – II] at RWRDC Division, HAL [DC]. CONTRACT NO. HAL/FMD/C-123/25-26

Name of the Contractor :

Sl. No. Specification Quantity Unit Rate in Figs [Excluding GST] Rate in Words Amount

Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The Tenderer shall abide by prevailing GST act. (2) L1 (lowest quote) will be determined based on the total quoted amount including GST. (3) This BOQ specification has to be read in conjunction with relevant CPWD specifications amended upto date/ detailed technical specification in tender document and tender drawings if any.

Part - I [Civil Works]

1 Removing / transporting the surplus excavated earth including debris, vegetation waste, concrete waste, etc., to a distance upto 15000m / outside HAL premises / to contractor's own yard including loading, unloading, depositing, spreading, levelling, etc., all complete as per directions of Engineer-in-Charge. 44289.00 Cu m 523.09 Rupees Five Hundred Twenty Three and Nine Paise Only 23167133.01

2 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas in all kinds of soft / hard soil for foundations, footings, column pedestals or members as per the drawing or as per directions of EIC, etc., (exceeding 30cm in depth, 1.50m in width as well as 10Sq m on plan) including removal of vegetation and in-equalities, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, levelling, ramming the bottom of excavation, getting out and disposal of excavated earth lead upto 50m for all lifts with all labour, tools & tackles, plant & machinery, hire & fuel charges, etc., all complete as directed by Engineer-in-Charge. 78367.00 Cu m 173.00 Rupees One Hundred Seventy Three Only 13557491.00

3 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains in all kinds of soil (not exceeding 1.50m in width or 10Sq m on plan), including dressing of sides and ramming of bottoms,for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m, etc., all complete as directed by Engineer-in-Charge. 1516.00 Cu m 253.69 Rupees Two Hundred Fifty Three and Sixty Nine Paise Only 384594.04

4 Returning / Filling in available useful excavated earth (excluding rock) free from salts, organic or other deleterious matter (Other than black cotton soil & rock, etc.,) in trenches, plinth, sides of foundations, etc., in layers not exceeding 20cm in depth, consolidating each deposited layer by watering, breaking / removing clods exceeding 50mm, ramming and consolidation, etc., with all labour, tools & tackles, plant & machinery, etc., lead up to 50m and all lifts, etc., all complete as directed by Engineer-in-Charge. 32172.00 Cu m 191.02 Rupees One Hundred Ninety One and Two Paise Only 6145495.44

5 Supplying and filling with sand under floors, footings, etc., including watering, ramming, consolidating and dressing, etc., all complete as directed by Engineer-in-Charge. 390.80 Cu m 2069.76 Rupees Two Thousand Sixty Nine and Seventy Six Paise Only 808862.21

6 Providing and laying in position cement concrete 1:3:6, 20mm nominal size aggregate - All work up to plinth level, including mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions, etc., all complete as directed by the Engineer-in-Charge. 5425.00 Cu m 7109.25 Rupees Seven Thousand One Hundred Nine and Twenty Five Paise Only 38567681.25

7 Making plinth protection 50mm thick of cement concrete 1:3:6, 20mm nominal size aggregate over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth, etc., all complete as directed by the Engineer-in-Charge. 423.00 Sq m 730.26 Rupees Seven Hundred Thirty and Twenty Six Paise Only 308899.98

8 Supplying, mixing and placing plain cement concrete (1:2:4) of required thickness using 20mm nominal size down graded hard stone/granite aggregate in accordance with IS 456 in Cills, fillets, coping, walls, columns, bases of supporting structures, etc., upto floor five level, including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions etc., and finishing, etc., all complete as directed by the Engineer-in-Charge. 59.00 Cu m 9643.63 Rupees Nine Thousand Six Hundred Forty Three and Sixty Three Paise Only 568974.17

9 Providing and laying in position cement concrete for all work up to plinth level including flooring of 1:2:4 (1 cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources), etc., all complete as directed by the Engineer-in-Charge. 6.00 Cu m 7678.21 Rupees Seven Thousand Six Hundred Seventy Eight and Twenty One Paise Only 46069.26

10 Centering and shuttering including strutting, propping, etc., and removal of form work for bases of support structures of compound wall fencing, etc., all complete as directed by the Engineer-in-Charge. 155.00 Sq m 382.18 Rupees Three Hundred Eighty Two and Eighteen Paise Only 59237.90

11 Formwork (Centering and shuttering including strutting, propping, etc., and removal of form) for the following RCC members which are defined as below, in fair finished by providing timber, wooden planks, runners / M.S. sheets with all supports, struts, braces, wedges, scaffolds, bracings, ladders, gangways, dressing with oil including M.S. bolts nuts and washers, temporary openings, filleting for a stop, chamfered edges, internal / external splayed, rounded angles or grooves for forming throating including making temporary openings in the forms for pouring concrete, etc., all complete as directed by the Engineer-in-Charge for the sub-items mentioned below. Note: Formwork material is contractor's own property and shall be removed after completion of work.

a) Foundations, footings, bases of columns, bed concrete, ramp concrete, pedestal, cable trench bases, drain bases, pile cap, culvert bases, kerbs, etc., for mass concrete 9793.00 Sq m 382.18 Rupees Three Hundred Eighty Two and Eighteen Paise Only 3742688.74

b) Walls (any thickness) including attached pilasters, butteresses, plinth and string courses, cable trench walls, haunches, etc., 18325.00 Sq m 821.09 Rupees Eight Hundred Twenty One and Nine Paise Only 15046474.25

c) For Roofs, landings, suspended floors, Slabs supported on walls, roofs, landings, balconies, access platforms, Gutters, decks, etc., 1545.00 Sq m 903.68 Rupees Nine Hundred Three and Sixty Eight Paise Only 1396185.60

d) Plinth beams, Lintels, Beams, room beams, beams, girders, bressumers and cantilevers, etc., 3455.00 Sq m 717.68 Rupees Seven Hundred Seventeen and Sixty Eight Paise Only 2479584.40

e) For Columns, Pillars, Piers, etc., 1328.00 Sq m 936.87 Rupees Nine Hundred Thirty Six and Eighty Seven Paise Only 1244163.36

f) Chajja, Weather shade, Canopies, Corbels, etc, including edges 115.00 Sq m 926.93 Rupees Nine Hundred Twenty Six and Ninety Three Paise Only 106596.95

g) Edges of slabs and breaks in floors and walls under 20cm wide 548.00 R m 203.25 Rupees Two Hundred Three and Twenty Five Paise Only 111381.00

h) Edges of slabs and breaks in floors and walls (Above 20 cm wide) 168.00 Sq m 856.71 Rupees Eight Hundred Fifty Six and Seventy One Paise Only 143927.28

i) Stairs (excluding landings), Steps, etc., 99.00 Sq m 745.50 Rupees Seven Hundred Forty Five and Fifty Paise Only 73804.50

j) Small lintels not exceeding 1.50m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks. 6.00 Sq m 382.18 Rupees Three Hundred Eighty Two and Eighteen Paise Only 2293.08

k) Extra for additional height in centering, shuttering for Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) where ever required with adequate bracing, propping, etc., including cost of de-shuttering and decentering at all levels at a height of around 4.70m height against 3.50m standard height. (Note-plan area to be measured). 9.00 Sq m 749.06 Rupees Seven Hundred Forty Nine and Six Paise Only 6741.54

l) Extra for additional height in centering, shuttering for Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) where ever required with adequate bracing, propping, etc., including cost of de-shuttering and decentering at all levels at a height of around 6.00m height against 3.50m standard height. (Note-plan area to be measured). 45.00 Sq m 1123.60 Rupees One Thousand One Hundred Twenty Three and Sixty Paise Only 50562.00

m) Extra for additional height in centering, shuttering for Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, upto a height of around 8.50 m as against 3.5m standard height. (Plan area to be measured). 39.00 Sq m 1872.66 Rupees One Thousand Eight Hundred Seventy Two and Sixty Six Paise Only 73033.74

12 Supplying, straightening, fabricating (cutting & bending), placing in position and binding steel reinforcement of TMT bars of not less than Fe 500 D conforming to IS 1786 for all concrete reinforcment members / works above / below plinth level, including cutting to length, bending to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with mild steel wire (Annealed) not less than 0.90mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it, etc., complete all as per specifications, drawings and as directed by the Engineer-in-Charge. Note: a) Only authorized laps, chairs etc. shall be considered for measurement. b) The exposed Reinforcement bars shall be coated with cement slurry. 1010781.00 Kgs 105.12 Rupees One Hundred Five and Twelve Paise Only 106253298.72

13 Providing and laying in position ready mixed or site batched M25 Grade with minimum cement content of 350Kgs/m3 design mix cement concrete for reinforced cement concrete work using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength including pumping of concrete to site of laying, consolidation, levelling, curing, scaffolding, all materials, labour, carriage for all leads & lifts but excluding the cost of centering, shuttering, finishing and reinforcement, etc., all complete as directed by Engineer-in-Charge. Note: (i) Site design mix to be obtained from Govt. / NABL laboratory for site batching concrete. (ii) Small quantity is as approved by EIC in volumetric proportion.

a) All works upto plinth level including necessary openings and packing if any for laying pipes, cables, etc., 7297.00 Cu m 9263.11 Rupees Nine Thousand Two Hundred Sixty Three and Eleven Paise Only 67592913.67

b) All works above plinth level upto floor V level including necessary openings and packing if any for laying pipes, cables, etc., 551.00 Cu m 9609.72 Rupees Nine Thousand Six Hundred Nine and Seventy Two Paise Only 5294955.72

14 Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates / drain slabs, anchor blocks, plain window sills and the like, along with the necessary anchoring systems or handles / hook and including the cost of required centering, shuttering but excluding cost of reinforcement with 1:1.5:3, 20mm nominal size aggregate, etc., all complete as directed by Engineer-in-Charge. 71.00 Cu m 10151.92 Rupees Ten Thousand One Hundred Fifty One and Ninety Two Paise Only 720786.32

15 Construction of Coursed rubble / size stone masonry (first sort) in cement mortar (1:6) (1 cement : 6 coarse sand) with hard stone, solidly hearted faces, beds and joints squared back, in foundation and below plinth including levelling up with cement concrete 1:6:12 aggregate of 20mm nominal size) upto plinth level, raking out joints 10mm deep, curing, providing weep holes if any, etc., all complete as directed by the Engineer-in-Charge. 65.00 Cu m 8588.02 Rupees Eight Thousand Five Hundred Eighty Eight and Two Paise Only 558221.30

16 Providing and fixing expansion hold fasteners on C.C. / R.C.C / Brick masonry surface backing including drilling necessary holes and the cost of bolt of Wedge expansion type, etc., all complete as directed by Engineer-in-Charge.

a) Fastener with threaded dia 10mm each 318.00 Each 38.98 Rupees Thirty Eight and Ninety Eight Paise Only 12395.64

b) Fastener with threaded dia 6mm 318.00 Each 35.81 Rupees Thirty Five and Eighty One Paise Only 11387.58

17 Providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish, etc., complete at all levels with Granite Stone slab of colour Black, Cherr / Ruby Red and each piece exceeding 0.50Sq m, etc., all complete as directed by the Engineer-in-Charge. 16.00 Sq m 5005.72 Rupees Five Thousand Five and Seventy Two Paise Only 80091.52

18 Providing and fixing M.S. grills of required pattern to windows / walls / in frames of windows, ventilators, etc., and approved design using MS structurals such as M.S flats, angles, round / square bars, etc., including necessary cutting, welding, embedding in concrete, masonry etc., including priming coat with approved steel primer, etc., all complete as directed by Engineer-in-Charge. 758.00 Kgs 232.29 Rupees Two Hundred Thirty Two and Twenty Nine Paise Only 176075.82

19 Providing [40 x 5]mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and plugs and embedding in cement concrete block [30 x 10 x 15]cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size), etc., all complete as directed by Engineer-in-Charge. 77.00 Each 223.03 Rupees Two Hundred Twenty Three and Three Paise Only 17173.31

20 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section [90 x 45]mm having single rebate of [32 x 15]mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame, etc., all complete as directed by the Engineer-in-Charge. 13.00 R m 556.43 Rupees Five Hundred Fifty Six and Forty Three Paise Only 7233.59

21 Providing and fixing to existing door frames 30mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels, including provision of internal wood lipping, rebates, suitable blocks for taking mortice locks, latches or other fittings, fitting to frames/chowkats etc., conforming to IS: 14856, etc., all complete as directed by the Engineer-in-Charge. 6.00 Sq m 3626.15 Rupees Three Thousand Six Hundred Twenty Six and Fifteen Paise Only 21756.90

22 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, with double speed adjustment with necessary accessories and screws, etc., all complete as directed by Engineer-in-Charge. 3.00 Each 958.15 Rupees Nine Hundred Fifty Eight and Fifteen Paise Only 2874.45

23 Providing and fixing aluminium hanging floor single rubber door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws, etc., all complete as directed by Engineer-in-Charge. 3.00 Each 38.59 Rupees Thirty Eight and Fifty Nine Paise Only 115.77

24 Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws, etc., all complete as directed by Engineer-in-Charge. 3.00 Each 832.92 Rupees Eight Hundred Thirty Two and Ninety Two Paise Only 2498.76

25 Providing and fixing ISI marked aluminium butt hinges [125 X 75 X 4]mm anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyedto required colour or shade with necessary screws, etc., all complete as directed by Engineer-in-Charge. 12.00 Each 146.29 Rupees One Hundred Forty Six and Twenty Nine Paise Only 1755.48

26 Providing and fixing aluminium handles of 125mm size, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws, etc., all complete as directed by Engineer-in-Charge. 6.00 Each 64.57 Rupees Sixty Four and Fifty Seven Paise Only 387.42

27 Providing and fixing aluminium tower bolts of size [250 X 10]mm, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyedto required colour or shade, with necessary screws, etc., all complete as directed by Engineer-in-Charge. 3.00 Each 112.22 Rupees One Hundred Twelve and Twenty Two Paise Only 336.66

28 Providing and fixing Fire resistant door frame of section [143 x 57]mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/Sq m) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size [10 x 4]mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc and including necessary accessories, etc., all complete as directed by Engineer-in-Charge. 34.00 R m 1665.80 Rupees One Thousand Six Hundred Sixty Five and Eighty Paise Only 56637.20

29 Providing and fixing 50mm thick glazed Fire resistant door shutters with view panel of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-Charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100mm wide, bottom rail 200mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with all necessary fittings along with stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer, etc., all complete as directed by Engineer-in-Charge. 17.00 Sq m 7341.68 Rupees Seven Thousand Three Hundred Forty One and Sixty Eight Paise Only 124808.56

30 Providing and fixing panic bar / latch (Double point) to the fire resistant door fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the EIC, all complete as per direction of Engineer-in-charge. 10.00 Each 8153.45 Rupees Eight Thousand One Hundred Fifty Three and Forty Five Paise Only 81534.50

31 Providing and fixing Fly proof stainless steel grade 304 wire gauge with 0.50mm dia wire and 1.40mm wide aperture fixing to the Windows, Ventilators, Aluminium sections, etc., all complete as per the architectural drawings and the directions of Engineer-in-Charge. 31.00 Sq m 1754.68 Rupees One Thousand Seven Hundred Fifty Four and Sixty Eight Paise Only 54395.08

32 Providing and fixing 200mm stainless steel fancy handle to fire rated doors of approved make fixed with SS screws, etc., all complete as directed by Engineer-in-Charge. 10.00 Each 181.91 Rupees One Hundred Eighty One and Ninety One Paise Only 1819.10

33 Structural steel work riveted, bolted or welded in built up sections, trusses, girders, ladders, chequered plates, staircase, fencing and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, etc., all complete as directed by Engineer-in-Charge. 436534.00 Kgs 130.31 Rupees One Hundred Thirty and Thirty One Paise Only 56884745.54

34 Providing and fixing stainless steel (Grade 304) railing of approved size / design by welding, etc., made of Hollow tubes, channels, plates, etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts, etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement , on the top of the floor or the side of waist slab / side of a road / for fencing ,etc., as per approval of Engineer-in-Charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.,), etc., all complete as directed by the Engineer-in-Charge. 15654.00 Kgs 752.77 Rupees Seven Hundred Fifty Two and Seventy Seven Paise Only 11783861.58

35 Providing and fixing hand rail of approved size / design by welding etc., made of M.S hollow tubes, channels, plates, angles, etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fixing the same with necessary nuts and bolts, dash fasteners and all other accessories of required size, all complete on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-Charge i.e. fixing to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer, etc., all complete as directed by the Engineer-in-Charge. 2430.00 Kgs 191.80 Rupees One Hundred Ninety One and Eighty Paise Only 466074.00

36 Supplying, fabricating and fixing in position Steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using for Main gates with all the members like hinges, etc., as per the design, etc., all complete as directed by Engineer-in-Charge. 3927.00 Kgs 168.22 Rupees One Hundred Sixty Eight and Twenty Two Paise Only 660599.94

37 Structural steel work in single section, fixed with or without connecting plate, including cutting, welding, hoisting, fixing in position and applying a priming coat of approved steel primer, etc., all complete as directed by Engineer-in-Charge. 10227.00 Kgs 114.37 Rupees One Hundred Fourteen and Thirty Seven Paise Only 1169661.99

38 Providing and laying flamed finish Granite stone of Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent colour for flooring, ramps in required design and patterns for ramps, flooring and steps including treads & risers in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing, round nosing, etc., all complete as specified and as directed by the Engineer-in-Charge. 163.00 Sq m 3105.69 Rupees Three Thousand One Hundred Five and Sixty Nine Paise Only 506227.47

39 Providing and laying Glazed vitrified tiles Matt / Anti skid polished finish size in floors as indicated below for Paper Joint of tile size of [600 X 600]mm (Thickness to be specified by the manufacturer) with water absorption less than 0.08% and confirming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement: 4 course sand), including grouting the joints with grey cement slurry @ 3.30Kgs/Sq m including grouting the joints with white cement and matching pigments, etc., all complete as directed by Engineer-in-Charge. Note: Quoted rate shall be inclusive of screed, pointing, etc., 10.00 Sq m 1427.62 Rupees One Thousand Four Hundred Twenty Seven and Sixty Two Paise Only 14276.20

40 Providing and fixing Ceramic glazed wall tiles / Vitrified tiles/Anti skid/ Matt finished conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and set & jointing with neat grey cement slurry @ 3.30Kgs per Sq m, including pointing in white cement mixed with pigment of matching shade complete including machine cutting, curing etc., all complete as directed by the Engineer-in-Charge. Note: Quoted rate shall be inclusive of screed, pointing, etc., 32.00 Sq m 1235.72 Rupees One Thousand Two Hundred Thirty Five and Seventy Two Paise Only 39543.04

41 Providing and laying Double Charged vitrified floor tiles polished finish size of tile Size of [600 X 600]mm or nearest available size in floors over a screed of cement mortar (1:4) 20mm thick for Paper Joint (Thickness to be specified by the manufacturer) with water absorption less than 0.08% and confirming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement: 4 course sand), including grouting the joints with grey cement slurry @ 3.30Kgs/Sq m including grouting the joints with white cement and matching pigments, etc., all complete as directed by Engineer-in-Charge. 283.00 Sq m 1416.70 Rupees One Thousand Four Hundred Sixteen and Seventy Paise Only 400926.10

42 Providing and laying Vitrified tiles in Skirting over a screed of cement mortar (1:3) - Size of Tile [600 x 600]mm or nearest size available (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.30Kgs/Sq m including grouting the joint with white cement & matching pigments, etc., all complete as directed by Engineer-in-Charge. 33.00 Sq m 1581.79 Rupees One Thousand Five Hundred Eighty One and Seventy Nine Paise Only 52199.07

43 Providing, fixing, testing and commissioning single socketed pipes of 110mm dia, on wall face unplasticised Rigid PVC rain water pipes of 6 kg/cm² SWR grade and of approved make conforming to IS : 13592 Type A, including jointing together with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion and all necessary fittings & specials, bends, branches, sockets, clamps, pipe cutting and wastages, cutting and making good the walls, connecting to existing lines, etc., along with removal of existing rain water pipes, etc., all complete as directed by the Engineer-in-Charge. 267.00 R m 367.81 Rupees Three Hundred Sixty Seven and Eighty One Paise Only 98205.27

44 Providing, applying and laying 12mm thick cement plaster work in for internal / External areas of Ceilings, Chajjas etc in CM (1:4) including forming grooves not exceeding 10mm wide and n.exc 10mm deep as per requirement as directed including preparation of surface by hacking etc., at all levels with necesary materials, labour, scaffoldings, curing, tools and tackles, plants, etc., threading if any, etc., all complete as directed by Engineer-in-Charge. 1083.00 Sq m 338.23 Rupees Three Hundred Thirty Eight and Twenty Three Paise Only 366303.09

45 Providing, applying and laying cement mortar (1:6) plastering 15mm thick on brick / solid blocks / concrete surfaces, finished even and smooth with trowel for Internal / External walls, etc., including supply and fixing of hexagonal chicken mesh minimum 150mm wide having opening [20 x 20]mm of 26 gauge at juncitons of concrete & brick work or between different material, including making grooves as per the requirement n.exc 10mm width and not exceeding 10mm deep with necesary materials, labour, scaffolding, curing, tools and tackles etc., at all heights, etc., all complete as directed by the Engineer-in-Charge. 1119.00 Sq m 373.27 Rupees Three Hundred Seventy Three and Twenty Seven Paise Only 417689.13

46 Providing, applying and laying 18mm thick cement plaster work in two coats for external areas as directed. First coat 12mm thick in cement mortar (1:5) made rough to recieve top coat, second coat 6mm thick in cement mortar (1:6), final surface finished with a floating coat of neat cement after necessary preparation of surface, at all levels including supply and fixing of hexagonal chicken mesh minimum 150mm wide having opening [20 x 20]mm of 26 gauge at juncitons of concrete & brick work or between different material, with necesary materials, labour, scaffoldings, curing, tools and tackles, plants, etc., threading if any, etc., all complete as directed by Engineer-in-Charge. 5780.00 Sq m 505.37 Rupees Five Hundred Five and Thirty Seven Paise Only 2921038.60

47 Painting newly plastered external surfaces with two or more coats applied at 1.43 litre / 10 Sq m / as per manufacturer specifications of 100% premium acrylic emulsion paint having VOC less than 50 grams / litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint with silicon additives of approved make, colour, shade, tint & pattern at all levels, over and including a coat of approved acrylic primer including preparing the surface by removing loose dirt and any organic growth, filling of cracks, necessary scaffolding, etc., all complete as directed by the Engineer-in-Charge. Note: The paint shall have anti-algal, anti-fungal, UV resistant & anti-tarnishing qualities with 100% acrylic base and silicon or elastomeric additives. 6032.00 Sq m 176.65 Rupees One Hundred Seventy Six and Sixty Five Paise Only 1065552.80

48 Painting newly plastered interior surfaces with two coats of premium acrylic emulsion paint of interior grade having VOC (Volatile Organic Compound) content less than 50 grams / litre conforming to IS 15489, of approved make, brand, colour and texture, shade, tint, manufacture & pattern at all levels including non-reflective paint whereever required, etc., including preparing the surface by removing loose dirt and any organic growth, smoothening the surface by using suitable emery paper, filling crevices and finishing even and smooth by providing and applying white cement based putty of suitable thickness in 2 coats of approved brand and manufacture over the plastered wall surface and followed by the applying priming coat with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content With water thinnable cement primer on applied putty having VOC content less than 50 grams / litre, necessary scaffolding, etc., all complete as directed by the Engineer-in-Charge. 2092.00 Sq m 363.33 Rupees Three Hundred Sixty Three and Thirty Three Paise Only 760086.36

49 Painting Steel surfaces of any description with two coats of synthetic enamel paint of approved colour, brand and manufacture to give an even shade, including preparation of surface by rubbing with fine grade of abrasive paper to ensure smooth, etc., all complete as directed by the Engineer-in-Charge. 3512.00 Sq m 220.50 Rupees Two Hundred Twenty and Fifty Paise Only 774396.00

50 Providing and laying APP alround the pipes i.e. G.I pipe, etc., (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/Sq qm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints, etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. 230.00 Sq m 523.79 Rupees Five Hundred Twenty Three and Seventy Nine Paise Only 120471.70

51 Demolition of reinforced cement concrete work of any description and in any position manually / by mechanical means using pneumatic tools, breaking to pieces of any thickness or volume, if necessary stockpiling and stacking servicable and unservicable materials seperately at designated locations and disposal of demolished / rubbish / unserviceable / dismantled or waste material (Except saleable materials) by mechanical transport outside HAL upto a total lead of 10 kms for all lifts, including cutting reinforcement bars, etc., all complete as directed by the Engineer-in-Charge. 11.00 Cu m 3180.62 Rupees Three Thousand One Hundred Eighty and Sixty Two Paise Only 34986.82

52 Demolishing / Dismantling stone rubble masonry built in C.M manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead, etc., all complete as directed by the Engineer-in-Charge. 27.00 Cu m 2396.44 Rupees Two Thousand Three Hundred Ninety Six and Forty Four Paise Only 64703.88

53 Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead, etc., all complete as directed by the Engineer-in-Charge. 3.00 Cu m 2007.83 Rupees Two Thousand Seven and Eighty Three Paise Only 6023.49

54 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechnical means, including loading, transporting, unloading outside HAL Premises / Contractors own yard or as approved by Engineer-in-Charge, beyond 50m initial lead, for all leads including all lifts involved, etc., all complete as directed by the Engineer-in-Charge. 30.00 Cu m 257.24 Rupees Two Hundred Fifty Seven and Twenty Four Paise Only 7717.20

55 Supplying, Laying and compacting of granular sub-base in flooring, subbases, ramps, etc., upto plinth level of requisite grading by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, etc., all complete as per specifications and directions of Engineer-in-Charge. 5294.00 Cu m 2737.14 Rupees Two Thousand Seven Hundred Thirty Seven and Fourteen Paise Only 14490419.16

56 Providing and laying design mix cement concrete of M-30 grade manufactured in automatic batching plant (RMC plant) i/c transportation to site in transit mixer in roads / hardstandings / ramps using cement content as per design mix, using coarse sand and graded stone aggregate of approve size in appropriate proportions as per approved & specified design criteria, laying over reinforcement, spreading and compacting mechanically by using needle vibrator, levelling to the required slope/camber, finishing with required texture including steel form work with sturdy M.S channel sections, curing making provision for contraction / expansion joints, construction and longitudinal joints [10mm wide X 50mm deep] by groove cutting machine, providing and filling joints with approved joint filler and sealent, etc., all complete as per the drawings / directions of EIC. 3148.00 Cu m 10816.29 Rupees Ten Thousand Eight Hundred Sixteen and Twenty Nine Paise Only 34049680.92

57 Providing and placing in position 100mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways, neat cement punning on finished surface, properly encased on all edges with 1.60mm thick, 100mm wide MS sheet duly painted over priming coat, reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12mm dia bar for hooks etc including cost of cartage, all leads & lift, handling at site, etc., all complete as directed by the Engineer-in-Charge. 1937.00 Sq m 3003.59 Rupees Three Thousand Three and Fifty Nine Paise Only 5817953.83

58 Supplying and Stacking at site good Earth along with levelling and neatly dressing of soil completely in suitable layers to requisite level and camber, etc., all complete as directed by the Engineer-in-Charge. 25963.00 Cu m 846.47 Rupees Eight Hundred Forty Six and Forty Seven Paise Only 21976900.61

59 Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, etc., all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.) 477.00 Per 19cm depth per 2.50cm width per metre length 245.35 Rupees Two Hundred Forty Five and Thirty Five Paise Only 117031.95

60 Providing and fixing pre-moulded joint filler in expansion / constructions joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, etc., all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.) 6367.00 Per 6cm depth per 1.0cm width per metre length 30.99 Rupees Thirty and Ninety Nine Paise Only 197313.33

61 Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion / constructional joints in roads / pavements using grade 'A' sealing compound conforming to IS: 1834, etc., all complete as directed by the Engineer-in-Charge. 6367.00 Per cm depth per cm width per metre length 8.43 Rupees Eight and Forty Three Paise Only 53673.81

62 Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion / constructional joints in roads / pavements using grade 'A' sealing compound conforming to IS: 1834, etc., all complete as directed by the Engineer-in-Charge. 477.00 Per cm depth per 2.50cm width per metre length 21.08 Rupees Twenty One and Eight Paise Only 10055.16

63 Providing and fixing concertina coil fencing (single layer) with punched tape concertina coil 600mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, with existing angle iron ‘Y’ shaped placed at a distance as per requirement / as per the architechtural dwg and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, etc., all complete as directed by the Engineer-in-Charge with reinforced barbed tape (R.B.T.) / Spring core (2.50mm thick) wire of high tensile strength of 165 kg / Sq mm with tape (0.52mm thick) and weight 43.478 gm / metre (cost of M.S. angle, C.C. blocks shall be paid separately) 300.00 R m 366.25 Rupees Three Hundred Sixty Six and Twenty Five Paise Only 109875.00

64 Providing and fixing concertina coil fencing (double layer) with punched tape concertina coil 600mm dia 10 metre openable length ( total length 90m), having 50 nos rounds per 6 metre length, with existing angle iron ‘Y’ shaped / required shape, placed at a distance as per requirement/ as per the architechtural dwg and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, etc., all complete as directed by the Engineer-in-Charge with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ Sq mm with tape (0.52 mm thick) and weight 43.478 gm / metre (cost of M.S. angle, C.C. blocks shall be paid separately) 400.00 R m 732.49 Rupees Seven Hundred Thirty Two and Forty Nine Paise Only 292996.00

65 Providing and fixing, testing and commissioning 8 mm dia C.P. / S.S. Jet (health faucet) with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved with necessary fittings, etc., all complete as directed by the Engineer-in-Charge. 2.00 Each 340.27 Rupees Three Hundred Forty and Twenty Seven Paise Only 680.54

66 Providing and fixing of toilet paper holder of C.P brass type, etc., all complete as specified and directed by Engineer-in-Charge. 2.00 Each 783.27 Rupees Seven Hundred Eighty Three and Twenty Seven Paise Only 1566.54

67 Providing and fixing [600 x 450]mm beveled edge mirror of minimum 4mm thick superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers, etc., all complete as directed by the Engineer-in-Charge. 2.00 Each 1567.07 Rupees One Thousand Five Hundred Sixty Seven and Seven Paise Only 3134.14

68 Providing and fixing White Vitreous China Wash basin of size [630 x 450]mm or nearest available size of approved make with a pair of 15mm C.P. brass pillar tap of approved model & make, C.I. brackets, 32 mm C.P. brass waste fitting, 32mm dia semi-rigid PVC waste pipe, including painting of fittings and brackets, cutting and making good the walls, connecting to floor trap and with all necessary fittings and accessories, etc., wherever required, etc., all complete as directed by the Engineer-in-Charge. 2.00 Each 2271.01 Rupees Two Thousand Two Hundred Seventy One and One Paise Only 4542.02

69 Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour, etc., all complete as directed by the Engineer-in-Charge. 2.00 Each 226.05 Rupees Two Hundred Twenty Six and Five Paise Only 452.10

70 Providing, fixing, testing and commissioning trap (floor trap) of approved make with 100mm inlet and 75mm outlet of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors , connection with PVC soil / waste pipe, necessary 150mm thick cement concrete (1:2:4) for embedding the trap, etc., all complete as directed by the Engineer-in-Charge. 4.00 Each 576.36 Rupees Five Hundred Seventy Six and Thirty Six Paise Only 2305.44

71 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with W.C. pan with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required, making it operational for use all complete, etc., all complete as directed by the Engineer-in-Charge. 2.00 Each 6349.90 Rupees Six Thousand Three Hundred Forty Nine and Ninety Paise Only 12699.80

72 Supplying, joining and laying/fixing 50mm dia Galvanised Iron (GI) pipe heavy grade conforming to IS 1239 (Part II) laid in vertical position by cutting,threading, including including supplying and fixing necessary heavy duty GI specials such as Bends, Unions, Tees, Nipples, Collars, Reducers, etc., complete as per site condition, etc., all complete as directed by the Engineer-in-Charge. 10.00 R m 1021.69 Rupees One Thousand Twenty One and Sixty Nine Paise Only 10216.90

73 Supplying and fixing strong gun - metel valve of high pressure heavy duty gate valve up to size of 50mm nominal bore approved make of ISI marked with wheel / lever head fixed to GI / HDPE pipe specials fixtures and fittings, etc., complete as per site condition, etc., all complete as directed by the Engineer-in-Charge. 3.00 Each 1000.55 Rupees One Thousand and Fifty Five Paise Only 3001.65

74 Supplying and fixing Non Return Valve 50mm dia of approved make of ISI marked fixed to HDPE Pipe / GI pipe with all required specials and fixtures and fittings, etc., complete as per site condition, etc., all complete as directed by the Engineer-in-Charge. 2.00 Each 1408.41 Rupees One Thousand Four Hundred Eight and Forty One Paise Only 2816.82

75 Providing and fixing of ball valve (brass) 25mm nominal bore dia, of approved quality, High or low pressure, with plastic floats, screwed for iron pipe or brass ferrule and fixed including necessary fittings i.e flynut, etc., all complete as directed by the Engineer-in-Charge. 1.00 Each 452.25 Rupees Four Hundred Fifty Two and Twenty Five Paise Only 452.25

76 Providing and placing in position at terrace (at all floor levels) / underground polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes along with necessasry accessories, etc., all complete as directed by the Engineer-in-Charge. 7000.00 Per litre 10.72 Rupees Ten and Seventy Two Paise Only 75040.00

77 Supplying, jointing, testing and commissioning, approved make 25mm GM body gate valves with C.I wheel and screwed ends, etc., complete all as directed by the Engineer-in-Charge. 1.00 Each 606.58 Rupees Six Hundred Six and Fifty Eight Paise Only 606.58

78 Providing and fixing PTMT angle stop cock 15mm nominal bore, weighing not less than 85 gms fixed to the health faucet, etc., all complete as directed by the Engineer-in-Charge. 4.00 Each 152.92 Rupees One Hundred Fifty Two and Ninety Two Paise Only 611.68

79 Providing and fixing C.P. brass bib cock of 15mm nominal bore dia and approved quality conforming to IS:8931, etc., all complete as directed by the Engineer-in-Charge. 4.00 Each 493.92 Rupees Four Hundred Ninety Three and Ninety Two Paise Only 1975.68

80 Providing and fixing Concealed Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, fixing the pipe with clamps at 1.00m spacing, necessary reducers, tank adaptors, etc., This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints and making good the walls, etc., all complete as per direction of Engineer-in-Charge.

a) 15mm dia 30.00 R m 485.14 Rupees Four Hundred Eighty Five and Fourteen Paise Only 14554.20

b) 20mm dia 30.00 R m 523.93 Rupees Five Hundred Twenty Three and Ninety Three Paise Only 15717.90

c) 25mm dia 40.00 R m 611.31 Rupees Six Hundred Eleven and Thirty One Paise Only 24452.40

d) 32mm dia 40.00 R m 720.51 Rupees Seven Hundred Twenty and Fifty One Paise Only 28820.40

81 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 40mm dia pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints, etc., all complete as directed by the Engineer-in-Charge. 50.00 R m 548.74 Rupees Five Hundred Forty Eight and Seventy Four Paise Only 27437.00

82 Providing and fixing enclosed type water meter (bulk type) of 80mm nominal dia or lesser dia conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions, reducers, etc., all complete as directed by the Engineer-in-Charge. 4.00 Each 3535.42 Rupees Three Thousand Five Hundred Thirty Five and Forty Two Paise Only 14141.68

83 Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910, on 12mm dia steel bar conforming to IS: 1786, having minimum cross section as [23 x 25]mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing, including fixing in Water Tanks / Manholes with [30 x 20 x 15]cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design, etc., all complete as directed by the Engineer-in-Charge. 15.00 Each 539.63 Rupees Five Hundred Thirty Nine and Sixty Three Paise Only 8094.45

84 Providing and fixing in position pre-cast R.C.C. manhole cover and frame Light Duty Rectangular in shape [600 X 450]mm internal dimentions and of approved quality, etc., all complete as directed by the Engineer-in-Charge. 2.00 Each 1401.10 Rupees One Thousand Four Hundred One and Ten Paise Only 2802.20

85 Providing and laying non-pressure NP2 class 300mm dia R.C.C / hume pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints, etc, all complete as directed by the Engineer-in-Charge. 73.00 R m 969.03 Rupees Nine Hundred Sixty Nine and Three Paise Only 70739.19

86 Constructing brick masonry manhole Inside size [120 x 90]cm and 90cm deep including C.I. cover with frame (heavy duty) 560mm internal diameter with common burnt clay F.P.S. (non modular) bricks of class designation 7.5in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design, etc., all complete as directed by the Engineer-in-Charge. 4.00 Each 32022.48 Rupees Thirty Two Thousand Twenty Two and Forty Eight Paise Only 128089.92

87 Constructing brick masonry chamber for underground C.I. inspection chamber and bends Inside dimensions [600 x 850]mm and 90cm deep for pipe line with three or more inlets with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) [455 x 610]mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete, etc., all complete as per standard design, drawings and the directions of Engineer-in-Charge. 5.00 Each 12766.74 Rupees Twelve Thousand Seven Hundred Sixty Six and Seventy Four Paise Only 63833.70

88 Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap, etc., by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, including removal of excavated earth with all its lifts and leads, etc., all complete as directed by the Engineer-in-Charge. (length of pile for payment shall be measured up to bottom of pile cap). 250.00 R m 2220.38 Rupees Two Thousand Two Hundred Twenty and Thirty Eight Paise Only 555095.00

89 Providing, fabricating and fixing aluminium work for partitions, Curtain wall frames, windows, ventilators (Min. thickness of powder coating 50 microns) made up of aluminium extruded sections, , etc., in fixed position Ventilators: conforming to designaton 63400 of IS 1285 and of approved make, Sliding Window Frame: Top and side sections of the frames to accomodate the shutter section. d) Bottom section of the frame shall be with gutter and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, e) Shutters are to be provided with glass of approved size for two shutters and stainless steel fly proof mesh for one shutter fixed with good quality tapered aluminium interlocking screwless snap on type glazing clip not less than 0.90mm thick. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. (Glazing will be paid seperately). 827.00 Kgs 517.41 Rupees Five Hundred Seventeen and Forty One Paise Only 427898.07

90 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions, etc., With float glass panes of 5mm thickness (weight not less than 12.50 kg/Sq m) along with EPDM rubber / neoprene gasket, etc., all complete as per the architectural drawings and the directions of Engineer-in-Charge. 123.00 Sq m 1466.99 Rupees One Thousand Four Hundred Sixty Six and Ninety Nine Paise Only 180439.77

91 Aluminium work for shutters of doors, windows i.e Powder coated aluminium windows (minimum thickness of powder coating 50 micron) & ventilators in moving position including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required including necessary accessories, etc., all complete as per the architectural drawings and the directions of Engineer-in-Charge. 700.00 Kgs 618.33 Rupees Six Hundred Eighteen and Thirty Three Paise Only 432831.00

92 Providing and laying integral cement based water proofing treatment With average thickness of 120mm and minimum thickness at khurra as 65mm including preparation of surface as required for treatment of roofs, (a) Applying a slurry coat of neat cement using 2.75 kg/Sq m of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks / brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge over 20mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of junctions of walls and slabs. 712.00 Sq m 1641.78 Rupees One Thousand Six Hundred Forty One and Seventy Eight Paise Only 1168947.36

(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ Sq m of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge. (d) Finishing the surface with 20mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of [300 x 300]mm square 3mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge . Note: (i) A performance guarantee bond for 5 years on non-judicial stamp paper of Rs. 500/- shall be given by the contractor. The 10% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after sucessful completion of 5 years from the date of completion of contract / project as a whole. (ii) Plan area shall be measured for payment. (iii) The quoted rate shall be for the entire work and nothing extra shall be paid on this account.

93 Supplying, filling, spreading & leveling stone boulders of size range 5cm to 20cm, below footings / in floors, in the required thickness, for all leads & lifts, etc., all complete as directed by Engineer-in-Charge. 1931.00 Cu m 1471.42 Rupees One Thousand Four Hundred Seventy One and Forty Two Paise Only 2841312.02

94 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes of 150mm dia with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories for all depths, etc., all complete as directed by Engineer-in-Charge. [This item to be operated in case silt is encountered] 600.00 R m 786.93 Rupees Seven Hundred Eighty Six and Ninety Three Paise Only 472158.00

95 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing / casing pipe, removable as per requirement for size of 150mm dia pipe, etc., all complete as directed by Engineer-in-Charge for borewell. 2.00 Each 240.19 Rupees Two Hundred Forty and Nineteen Paise Only 480.38

96 Supplying and fixing of 150mm dia M.S borewell clamps and cap with adjustable nuts, bolts, etc., all complete as directed by Engineer in Charge. 2.00 Each 1967.73 Rupees One Thousand Nine Hundred Sixty Seven and Seventy Three Paise Only 3935.46

97 Providing and fixing mineral fibre false ceiling tiles With 16mm thick beveled tegular mineral fibre false ceiling tile at all heights of size [595 X 595]mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7) in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33mm thick (galvanized @120 gsm) comprising of main T runners of [15 x 32]mm of length 3000mm, cross T of size [15 x 32]mm of length 1200mm and secondary intermediate cross T of size [15 x 32]mm of length 600mm to form grid module of size [600 x 600]mm suspended from ceiling using galvanized mild steel item (galvanised @ 80gsm) 50mm long 8mm outer diameter M-6 dash fasteners, 6mm diameter fully threaded hanger rod up to 1000mm length and L-shape level adjuster of size [85 x 25 x 2]mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450mm centre to centre & 40mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the Engineer-in-Charge. 223.00 Sq m 2274.28 Rupees Two Thousand Two Hundred Seventy Four and Twenty Eight Paise Only 507164.44

98 Providing and laying factory made Precast concrete solid blocks of 200mm thickness of grade M10 made of Normal resources / C & D Waste from approved manufacturer in superstructure above plinth level up to floor V level built in CM (1:6), etc., all complete as directed by Engineer-in-Charge. 517.00 Cu m 9594.37 Rupees Nine Thousand Five Hundred Ninety Four and Thirty Seven Paise Only 4960289.29

99 Hire charges for Hydraulic Excavator / JCB of 1 Cu m bucket include cost of services of operating staff, Cost of lubricating oil, diesel / Petrol / Kerosene oil , other consumables for running, etc., for Demolition, Excavation, dozing, levelling, loading, unloading, grading, etc., all complete as directed by Engineer-in-Charge. 150.00 Hour 1138.50 Rupees One Thousand One Hundred Thirty Eight and Fifty Paise Only 170775.00

100 Rolling and Compacting the existing subgrade by using 8-12 Tonne Three wheel Viromax Power Roller including well watering, etc., all complete as directed by Engineer-in-Charge. 24834.00 Sq m 2.44 Rupees Two and Forty Four Paise Only 60594.96

101 Supplying of Water proofing materilas to be mixed with the external plastering, etc., all complete as directed by Engineer-in-Charge. 154.00 Kgs 56.94 Rupees Fifty Six and Ninety Four Paise Only 8768.76

102 Providing and fixing Hera Design Superfine, 1 layer magnesite bonded wood wool acoustic panel, in walls and ceilings 1mm thick fibre, exquisite surface structure, building biology recommended, size [1200 x 600 x 25]mm, having edge detail AK-01 (5mm bevel on all 4 sides), weight 11.30 Kg/Sq m, fire protection class B-s1, d0 as per EN 13501-1 & Humidity Resistance of 95%. Thickness Tolerance T2 (± 1 mm) according to EN 13168. Wood wool panels to be PEFC certified & should bear the Forest Stewardship Council Seal confirming that the wood used originates from responsibly managed forests, including suitable framework and painting with non reflective coated paint Heradesign wood wool boards as specified by the Manufacturer and as per their Technical Data Sheet, etc., all complete as directed by the Engineer-in-Charge. 82.00 Sq m 6050.00 Rupees Six Thousand Fifty Only 496100.00

103 Supplying and fixing Motorized G.I. rolling shutter of approved make and made of required size. The curtain shall be constructed from Tata Bluescope / JSW 150 gsm single skinned galvalume steel laths with natural finish of min. 1.25mm thickness and interlocking distance of min 75mm. Side guides shall be made of minimum 2 or 3.15mm thick heavy duty TG Galvanised steel, as per the site requirement, along with necessary fixtures like cleats(spacing shall not exceed 0.75m) or supports brackets for attachments to the walls or column by screws or bolts and necessary seals. The size of the guide channels shall be conforming to Is:6248-1979. Single piece G.I. Heavy duty mild steel suspension shaft along with roller of sufficient diameter with springs shall be provided along with necessary hexagonal bracket plate of min 3.15mm thickness, size conforming to Is:6248-1979 and square bar, if necessary. The provision of Pressed galvalume steel hood cover with reinforced bracket as required to suit the shutter width and motor cover with natural finish of minimum 0.90mm thick and of reuired shape along with necessary fixtures and stiffeners like angle cleats, angle or flat stiffeners, etc., shall be provided. Bottom profile shall be of G.I. plate with angle stiffner. The bottom rail shall be fixed with extruded rubber bottom seal that shall seal against the floor when the door is fully closed. 91.00 Sq m 9407.35 Rupees Nine Thousand Four Hundred Seven and Thirty Five Paise Only 856068.85

The CE Certified CRS Compact Gear motorised system shall be indirect drive type along with system power supply wired with industrial plug and three station push button / switch with deadman control and arrangements for inside and outside locking. A provision of suitable safety devices / system like inbuilt limit switches, External safety brake's, Control switch, etc., are to be provided in accordance with EN 14121-1:2007 Safety of machinery. Provision shall be made for manual operation by hand chain in emergency condition, all complete & fully operational. The rate is inclusive of two coats of painting of approved shade and manufacture, over a coat of grey epoxy primer by spray including preparation of surface, all materials, labour, machinery, tools and tackels, etc., all complete as directed by the Engineer-in-Charge. Note: (i) Clear opening shall be measured for payment. (ii) The quoted rate shall be for the entire work and making it operational.

104 Supplying and fixing of UPVC openable (single / double leaf) multichambered and stiffened / reinforced framed door with profile colour as natural white of the following specification: Casement door single / double panel with French (False) Mullion, if required with zinc alloy (zamak) 3D hinges, suitable locking system, zinc alloy (zamak) powder coated handles on both sides. Using R3 series with outer frame (60mm & above upto 102mm) x (58mm & above upto 62mm) X (2.20mm and above) and shutters with approximate profile sections : (84mm and above upto 102mm) X (60mm and above) X 2.20mm and above . The corners of all the profiles of frames and shutters shall be homogenously fusion heat welded without any gaps. The shutters shall have necessary handles, locking and other associated fittings to facilitate smooth operation. Both frame and shutter shall be reinforced with GI profiles of thickness 1.25mm. The door unit has to be fixed to the exisitng masonry opening using anchor fasteners. The gaps between door frames and masonry walls shall be filled with silicon or any other suitable filler materials and also including all fittings and fixtures and making it operational. Glazing to be done with 6mm toughened glass as per the architectural drawings / as per instructions of EIC. (The Height of the door is upto 2.50meter). Note: 1) Shop drawing of the door has to be approved by the EIC / OIC prior to commencement of work. 2) Approval has to be taken for all the patch fittings prior to commencement of work. 3) Door has to be neatly finished and matched with the proposed tile flooring. 4) The rate is including fixing of 6mm clear toughened Glass. 43.00 Sq m 7850.00 Rupees Seven Thousand Eight Hundred Fifty Only 337550.00

105 Geo-Physical Survey by Geologist compartment for locating feasibility of water point including required instrument, labour, etc., all complete as directed by Engineer-in-Charge. 4.00 Nos 12650.00 Rupees Twelve Thousand Six Hundred Fifty Only 50600.00

106 Drilling of 160 / 165mm dia bore well up to required depth with necessary drilling plants and equipment (drilling rigs, compressor, etc.,) including site clearance if required, drilling through various ground strata necessary underground blasting of rock, tests for quantity and analysis of under ground water for quality including transportation of plant, equipment, men materials, etc., all complete as per site condition and as directred by Engineer-in-Charge.

a) Drilling of bore 0 – 75R m 150.00 R m 632.50 Rupees Six Hundred Thirty Two and Fifty Paise Only 94875.00

b) Drilling of bore 75.1 - 105R m 60.00 R m 649.76 Rupees Six Hundred Forty Nine and Seventy Six Paise Only 38985.60

c) Drilling of bore 105.1 – 135R m 60.00 R m 747.50 Rupees Seven Hundred Forty Seven and Fifty Paise Only 44850.00

d) Drilling of bore 135.1 - 165R m 60.00 R m 833.76 Rupees Eight Hundred Thirty Three and Seventy Six Paise Only 50025.60

e) Drilling of bore 165.1 - 195R m 60.00 R m 920.00 Rupees Nine Hundred Twenty Only 55200.00

f) Drilling of bore 195.1 – 225R m 60.00 R m 1035.00 Rupees One Thousand Thirty Five Only 62100.00

g) Drilling of bore 225.1 – 255R m 60.00 R m 1138.50 Rupees One Thousand One Hundred Thirty Eight and Fifty Paise Only 68310.00

h) Drilling of bore 255.1 – 285R m 60.00 R m 1288.89 Rupees One Thousand Two Hundred Eighty Eight and Eighty Nine Paise Only 77333.40

i) Drilling of bore 285.1 – 315R m 60.00 R m 1495.00 Rupees One Thousand Four Hundred Ninety Five Only 89700.00

107 Drilling of 160 / 165mm dia bore well by using Slow Rig Type drilling upto silting area / up to the required depth with necessary driiling plants and equipment (drilling rigs, compressor, etc.,) including site clearance if required, drilling through various ground strata. This items to be operated only in case if the soil has significance presence clay / silt bore during drilling operations up to required rock level. Howvever fast drilling shall be payable as applicable beyound the silt level, etc., all complete as directed by Engineer-in-Charge. 2.00 Lumpsum 63250.00 Rupees Sixty Three Thousand Two Hundred Fifty Only 126500.00

108 Supplying, jointing and fixing to required depth 160mm / 165mm dia Mild Steel casing pipe with 2.50mm thick and MS collar heavy grade of approved quality including threading, jointing to collars, welding, inserting to required depth, etc., all complete as per site condition and as directed by Engineer-in-Charge. (MS casing pipe and collars contractors own supply and exposed portion will be painted with anticorrosive paint) 100.00 R m 2875.00 Rupees Two Thousand Eight Hundred Seventy Five Only 287500.00

109 Supplying, joining and fixing to required depth PVC / UPVC Casing pipe 250mm (10") dia of heavy duty calss II confirming to IS 4985 of approved manufacture for borewell casing to avoid crack forming in surroundings / overburden area, etc., including jointing to collars, inserting to required depth, etc., all complete as per site condition and as directed by Engineer-in-Charge. 50.00 R m 2645.00 Rupees Two Thousand Six Hundred Forty Five Only 132250.00

110 Supplying joining and Fixing High Density Polyethylene pipes (HDPE-80) of 50mm dia of heavy duty of approved brand, for positioning of the Submersible Pump and laid in trenches at required depth, jointing to collars with chemical solution with necessary Stainless steel end fixtures and fittings, etc., complete as per site condition, etc., all complete as directed by Engineer-in-Charge. 660.00 R m 460.00 Rupees Four Hundred Sixty Only 303600.00

111 Supplying, Fixing / connecting 3 core 4 Sq.mm PVC insulted waterproof submersible copper core multi strand copper wire flat cable ISI marked of approved brand without joint, etc., all complete as directed by Engineer-in-Charge. 660.00 R m 345.00 Rupees Three Hundred Forty Five Only 227700.00

112 Supplying, errection and commissioning of 5.H.P. Deepwell Submersible pumpset of 5 H.P 3 Phase having discharge and head as per site condition, Kirloskar / CRI / Texmo make along with pannel baord suitable for 5 H.P (out Door) along with 3 Phase on / off switch, indicator lamp, Ammeter / Voltmeter, single phase preventer with MS angle leg painted with anti corrosive paint, etc., as per site condition, etc., all complete as directed by Engineer-in-Charge. 2.00 Each 134550.00 Rupees One Lakh Thirty Four Thousand Five Hundred Fifty Only 269100.00

113 Supplying and fixing of gun metal foot valve of size 50mm dia including its accessories to the G.I pipe at the suction end, etc., all complete as directed by Engineer-in-Charge. 4.00 Each 847.46 Rupees Eight Hundred Forty Seven and Forty Six Paise Only 3389.84

114 Supplying and fixing of 6mm thick toughend glass in glazing for aluminium / UPVC door, window, ventilator shutters and partitions, etc., at all heights with EPDM rubber / neoprene gasket and necessary packing material, etc., all complete as directed by Engineer-in-Charge. 6.00 Sq m 1460.00 Rupees One Thousand Four Hundred Sixty Only 8760.00

115 Supply & Installation of 150mm dia Heavy Class G.I.Pipe 'C' class including accessories like Bends, Flanges, etc., all complete as directed by Engineer-in-Charge. 340.00 R m 10197.61 Rupees Ten Thousand One Hundred Ninety Seven and Sixty One Paise Only 3467187.40

116 Designing, Proof checking, fabrication, erection, commission and proving of movable Motorised PEB housing / mobile shed including necessary covering on top and sides with pre painted galvalume sheeting of 0.80mm thickness including sleepers, rails for movement of mobile shelter for requisite length, including all the anchor fasteners, necessary movable shelter electrical panels (the panel shall cater power for the moving shelter DB, including necessary copper cables to moving shelter DB), limit switches, motors and etc., (tapping point will be provided in HAL LT panel). The scope include necessary, lightning arrestor and respective GI strip with necessary clamping arrangement upto earthpits shall be considered (2 Nos of the earth pits will be considered under HAL scope for each moving shelter), all complete for the following:

Slope of Roof : Min 1:10. Deisgn Loads to be considred: IS 875 Part-I, Part-II, Part-III and Part-IV latest revision.[As applicable]. End Walls: Fully open. Side wall: Cladding required. Cage Ladder requirment : Optional. Fall arrestor: Yes. Ridge Line: 01 No. Type of Bracing: X-Bracing. Materials of Specification: Hot Rolled Section: IS 2062 E 250 Type A. Tubes: IS 4923: 1997 Grade Yst 310. Cold Formed Memebers: [Secondary Purpose] ASTM A 653M Grade 340. Machined Bolts: DIN 933 Class 4.6/8.8. Roller Wheel: Yes Motors: As required of suitable capacity with limit switches, etc.,

117 For GTV with clear Internal dimensions of W= 30.0m, L= 30.0m with eaves height of 12.0m. Sleeper length of motion requirement min 65m, along with the Crane brackets, gantry for the EOT crane of capacity 2MT @ hook height of 8m is considered into the scope of PEB. Note:- The agency is required to provide the foundation details for execution. Payment of foundation will be paid under relavent items of work. (EOT crane is not considered in this scope). [Refer Tender Drawing]. 1.00 Each 21000000.00 Rupees Two Crore Ten Lakh Only 21000000.00

118 For TRWT with clear Internal dimensions of W= 14.0m, L= 14.0m with eaves height of 9.50m. Sleeper length of motion requirement 33m, along with the Crane brackets, gantry for the EOT crane of capacity 2MT @ hook height of 6m is considered into the scope of PEB. Note:- The agency is required to provide the foundation details for execution. Payment of foundation will be paid under relavent items of work. (EOT crane is not considered in this scope). [Refer Tender Drawing]. 1.00 Each 4641134.23 Rupees Forty Six Lakh Forty One Thousand One Hundred Thirty Four and Twenty Three Paise Only 4641134.23

119 Supplying, laying, testing and commissioning the following dia PVC pipes of 6 kg/cm² SWR grade and of approved make with rubber ring joints conforming to IS 5382, jointed together with solvent, in trenches and floors, including all necessary fittings & specials, bends, branches, sockets, pipe cutting and wastages, cutting and making good the floors, etc., all complete as directed by Engineer-in-Charge.

a) 75mm dia 70.00 R m 500.00 Rupees Five Hundred Only 35000.00

b) 110mm dia 70.00 R m 576.28 Rupees Five Hundred Seventy Six and Twenty Eight Paise Only 40339.60

120 Providing and fixing (Jaguar make) C.P brass Angle cock with all necessary fittings along with washers, leak proof rubber gasket arrangement, etc., and packing with white cement, etc., all complete as directed by Engineer-in-Charge. 4.00 Each 533.90 Rupees Five Hundred Thirty Three and Ninety Paise Only 2135.60

121 Supplying and fixing of Bullet Resistant glass window confirming to UL 752, EN 1063, 1003 of approx. thickness 40mm, Splinter proof, approved manufacturer, along with the suitable size BR steel frame confirming to EN-1522, 1523 & Angle spot for all the sides and filling items, if any to be embeded between frames before casting / fixing between concrete or masonry walls, along with D.G.U glass for exposed portion, with all necessary accessories like SS hinges, holdfasts, rubber bedding, sealant if necessary.,etc., in full and final, etc., all complete as directed by Engineer-in-Charge. Note:- payment will be made for complete work in Sq m (No extra payment will be considered for any other additional items for the above work). 40.00 Sq m 21520.00 Rupees Twenty One Thousand Five Hundred Twenty Only 860800.00

122 Supplying and fixing of following Motorized Sliding Doors to the fencing along with suitable framework and all other accessories. The work includes Supply, Installation, Testing & Commissioning of the said Motorized Sliding Door. Design:- The door shall be designed to withstand the windpressure of local site conditions in accordance with IS875 Part 3 & designed to withstand local windspeed. The structural elements of the sliding door system to be designed in accordance with IS 800:2007. Deflections of principle members within each door leaf structure are not to exceed L/140 or 100mm, whichever yields the lowest deflection. The track and top roller assembly of sliding door are coordinated such that the roller can also support itself whilst moving along the track and top tracks are able to accommodate live load deflections in the top tracks of upto L/360. Door configuration:- Each leaf / section shall move to the extremities and automatically stop at its preset electrical limit. Each leaf shall operate independently. A pass door / wicket door shall be provided of approximate size [1 X 2.10]m to enable personal access. Personal door / Wicket door shall be provided with safety sensor system to prevent door leaf operation when personal door is open. The door cladding, if necessary shall be of same as the door leaf cladding. The door leaf to be fabricated from Standard Mild steel sections. The external face of sliding door is covered with 0.50mm precoated corrugated galvalume sheet and weldmesh panels.

Protective coating:- All structural members of the said door undergo sand blasting process then coated with two coats of polyurethane spray painted over one coat of epoxy primer. Hardware:- Each door leaf is to be supported at the botom & top on suitable nos. of steel track wheels, rollers of suitable dia and with bottom & top track rails as per design requirement in accordance with the EN 10025:2004 or equivalent. Grease points are to be provided for wheel bearings. The rollers shall be inherently corrosion resistant (Zinc plated MS) and mounted on low friction / sealed bearings which will require no regular lubrication. The top track system shall be designed to limit the inclination of the door leaves due to discontinuity, high friction & blockage of bottom rail. Buffers & Drive units:- Heavy duty energy absorbing buffer stops are to be fitted at the extremities of the bottom tracks and mechanical stoppers are to be provided at the end of the top tracks. Each individual door leaf shall be fitted with its own drive unit along with suitable electric motor, squirrel cage motor with integral magnetic brake, gear box, trap door, including all necessary accessories, etc., all complete as per directions of Engineer-in-Charge. Note:- The rate is including packing charges, freight and Transit insurancee.t.c., and for the entire work and making it operational, no extra will be paid.

123 Supplying and fixing of Motorised Telescopic Bidirectional Sliding Door, approximate size of [16 X 11.50]m (clear width X clear height) with total four equal leaves & four nos of drive units and including all necessary accessories, etc., all complete as directed by Engineer-in-Charge. 1.00 Nos 5099765.26 Rupees Fifty Lakh Ninety Nine Thousand Seven Hundred Sixty Five and Twenty Six Paise Only 5099765.26

124 Supplying and fixing of Motorized Bidirectional Sliding Door, approximate size of [9 X 8]m (clear width X clear height) with total two equal leaves (width of 4.70m each and height of 8m) & two nos of drive units, including all necessary accessories, etc., all complete as directed by Engineer-in-Charge. 1.00 Nos 3140303.39 Rupees Thirty One Lakh Forty Thousand Three Hundred Three and Thirty Nine Paise Only 3140303.39

Sub-Total of Part - I [Civil Works] (Excluding GST) Rupees Forty Nine Crore Ninety One Lakh Seventy Three Thousand One Hundred Fifty Five and Twenty Six Paise Only 499173155.27

Part - II [Electrical Works]

Section-1 - Electrical, Data & Voice

Totally type tested panels(TTA)

Design, fabrication, supply, installation, testing and commissioning of the following Indoor type Modular construction TTA (Totally Type tested Assemblies) Switch Board as per IEC 61439- Part-I & II for Voltages up to 1100 V, degree of protection shall be IP-42, suitable to be mounted on the floor/cable duct as per site requirement including supply & fixing/grouting M.S channel frame work for erection of panel, with cable entry from bottom/top as per drawing coordination by EIC conforming to technical specification complete.

Note:-1)a) All ACB's in the LT panels shall be Manually drawout(MDO)/Electrical drawout(EDO) type as specified. Air Circuit breaker of approved make suitable for 415V 3 Ph & N supply with microprocessor based tripping device comprising of overload, short circuit and instantaneous ground fault protection(LSIG) including suitable range CTs and separate LED indications for overload, short circuit and ground fault along with release and also micro switches for service, isolated and locking positions for the breaker, door interlock, secondary isolating contacts, auxiliary contacts as required including ON/OFF indications, trip push button, trip indication, front operating handle and other connected accessories complete in all respects. b) All ACB's should be rated for minimum 50KA breaking capacity as detailed in BOQ (Icu=Ics=Icw for 1sec)

2)The operating height of the Panel shall not exceed 2.1 mtr. from FFL.

3)Aluminium bus bar size for carriying out specified current shall be as per type test certificate.

4)All MCCBs 400A & above shall be with Micro processor based and below 400A shall be adjustable with thermal settings(80% to 100%), overload and short circuit releases including door interlocking device, front operating handle complete,ON and OFF indication of LED indication lamps etc., complete in all respects.

1 Supply, Installation, Testing & commissioning of GTV & TRWT Main LT Panel (IEC 61439 Standard TTA Panel) (Indoor Type) 1.00 No 1467408.47 Rupees Fourteen Lakh Sixty Seven Thousand Four Hundred Eight and Forty Seven Paise Only 1467408.47

i) 1No - 3200A, 415V gr. 50KA, 4P EDO Type ACB

ii) Lot - 3200A 4P, 415V, short circuit rated 50KA for 1sec, Aluminium bus bars with busbar insulators, heat shrinkable PVC sleeves etc.

iii) 1No- Multi function meter (MFM/MDM)suitable for 3ph, 4 wire, 240V(L-N), 5A, CL-1,RS 485 Port Digital MFM/MDM of power logic PM2230 of Schneider or any equivalent make meeting technical specification of above MFM complete in all respect.

iv) 1Set of - 3200/5A current transformers of class 1 and suitable VA burden for metering.

v) 1No- (0-500V) range 96x96mm flush analog type voltmeter with RYB selector switch

vi) 1No 6A 415V gr TP 50KA MPCB for tapping power for metering and control circuit

vii) 1Set - RYB indicating lamps of LED module with 6A SP MCB.

viii) 1Set- 6A, MCB for the protection of measuring instruments.

i) 1No - 2500A, 415V gr. 50KA, TP+NL MDO Type ACB

ii) 1No - 250A, 415V gr. 50KA, TP+NL MCCB

iii) 1No - 200A, 415V gr. 50KA, TP+NL MCCB

iV) 4 Nos - 125A 415V gr. 50KA TP+NL MCCB

V) 4 Nos - 63A 415V gr. 50KA TP+NL MCCB

2 Partially type tested panels(PTTA)-Outdoor type

Design, fabrication, supply, installation, testing and commissioning of the following weatherproof cubicle type Outdoor LT Panels with front lockable door arrangement, mounted on the floor/cable duct/with MS stand as per site requirement using MS angle/channel frame work including supply, fixing & painting of suitable size M.S angle/channel iron frame work, with cable entry from bottom with removable gland plates with required knock-outs, panel fabricated out of CRCA sheet steel folded and braced as necessary to provide a rigid support for all components, totally enclosed, dust and vermin proof and degree of protection shall not be less than IP-55, multi-tier cubicle type formation with front hinged doors lockable doors for the individual feeders/compartments, preparation of surface and treatment by seven tank process, powder coated with approved colour for not less than 50 microns, with front lockable door(Double leaf), and all doors and covers shall be fully gasketed using good quality EPDM gasket and/or rubber strips and ensure good lockable, durable door opening & closing mechanism, suitable meshed ventilator louvers with suitable cover, canopy type top cover to avoid rainwater collection/entry, Aluminium bus bars for three phases and neutral, bus bar insulators, heat shrinkable PVC sleeves etc., with necessary interconnections as specified in Technical specifications for electrical & mechanical works, comprising of following switchgear and accessories complete in all respects and as directed by Engineer-in-charge.

Note:- 1)a) All ACB's in the LT panels shall be Manually drawout(MDO)/Electrical drawout(EDO) type as specified. Air Circuit breaker of approved make suitable for 415V 3 Ph & N supply with microprocessor based tripping device comprising of overload, short circuit and instantaneous ground fault protection(LSIG) including suitable range CTs and separate LED indications for overload, short circuit and ground fault along with release and also micro switches for service, isolated and locking positions for the breaker, door interlock, secondary isolating contacts, auxiliary contacts as required including ON/OFF indications, trip push button, trip indication, front operating handle and other connected accessories complete in all respects. b) All ACB's should be rated for minimum 50KA breaking capacity as detailed in BOQ (Icu=Ics=Icw for 1sec)

2) Current density shall not exceed 0.8A/sq.mm for Aluminium bus bars in LT Panel

3)All MCCBs 400A & above shall be with Micro processor based and below 400A shall be adjustable with thermal settings(80% to 100%), overload and short circuit releases including door interlocking device, front operating handle complete,ON and OFF indication of LED indication lamps etc., complete in all respects.

4)(i)All the MCBs shall be suitable for inductive loads and Lighting load. ii)All MCBs shall have overload and short circuit releases. iii) All MCBs shall be rated for 10kA breaking capacity, C curve.

5)The operating height of the Panel shall not exceed 2.1 mtr. from FFL.

2.1 Supply, Installation, Testing & commissioning of GTV sub panel (IEC 60439 standard PTTA panel) (Outdoor type) 1.00 No 134031.36 Rupees One Lakh Thirty Four Thousand Thirty One and Thirty Six Paise Only 134031.36

i) 1-no 250A 415V gr 4P 50KA MCCB, TM based.

ii) Lot - 300A, 4P, 415V, short circuit rated 50KA for 1sec, Aluminium bus bars with busbar insulators, heat shrinkable PVC sleeves etc.

iii) 1Nos- Multi function meter (MFM/MDM) suitable for 3ph, 4 wire, 240V(L-N), 5A, CL-1, RS 485 Port Digital MFM/MDM of EM6400NG of Schneider or any equivalent make meeting technical specification of above MFM complete in all respect.

iv) 1 Set-250/5A current transformers of class 1 and suitable VA burden for metering.

v) 1No- (0-500V) range 96x96mm flush analog type voltmeter with RYB selector switch

vi) 1No 6A 415V gr TP 50KA MPCB for tapping power for metering and control circuit

vii) 1Set - RYB indicating lamps of LED module with 6A, 230V, 10KA, SP MCB.

viii) 1Set- 6A, 230V, 10KA, SP MCB for the protection of measuring instruments.

i) 1 No - 125A 415V gr. 36KA TP+NL MCCB

ii) 1 No - 80A 415V gr. 36KA TP+NL MCCB

iii) 1No - 63A 415V gr. 10KA TPN MCB

iv) 1No - 40A 415V gr. 10KA TPN MCB

v) 2Nos - 32A 415V gr. 10KA TPN MCB

2.2 Supply, Installation, Testing & commissioning of TRWT Sub panel (IEC 60439 standard PTTA panel ) (Outdoor type) 1.00 No 127098.31 Rupees One Lakh Twenty Seven Thousand Ninety Eight and Thirty One Paise Only 127098.31

i) 1no - 200A 415V gr 4P 50KA, TM based MCCB.

ii) Lot - 250A, 4P, 415V, short circuit rated 50KA for 1sec, Aluminium bus bars with busbar insulators, heat shrinkable PVC sleeves etc.

iii) 1Nos- Multi function meter (MFM/MDM) suitable for 3ph, 4 wire, 240V(L-N), 5A, CL-1, RS 485 Port Digital MFM/MDM of EM6400NG of Schneider or any equivalent make meeting technical specification of above MFM complete in all respect.

iv) 1 Set-200/5A current transformers of class 1 and suitable VA burden for metering.

v) 1No- (0-500V) range 96x96mm flush analog type voltmeter with RYB selector switch

vi) 1No 6A 415V gr TP 50KA MPCB for tapping power for metering and control circuit

vii) 1Set - RYB indicating lamps of LED module with 6A, 230V, 10KA, SP MCB.

viii) 1Set- 6A, 230V, 10KA, SP MCB for the protection of measuring instruments.

i) 1 No - 100A 415V gr. 36KA TP+NL MCCB

ii) 1 No - 80A 415V gr. 36KA TP+NL MCCB

iii) 1No - 63A 415V gr. 10KA TPN MCB

iv) 3Nos - 32A 415V gr. 10KA TPN MCB

2.3 Supply, Installation, Testing & commissioning of GTV shelter panel/TRWT Shelter panel (IEC 60439 standard PTTA panel) (Outdoor type) 2.00 Nos 99367.80 Rupees Ninety Nine Thousand Three Hundred Sixty Seven and Eighty Paise Only 198735.60

Note: Entire Panel shall be mounted on suitable size MS angle frame of 0.3Mtr height(minimum) from floor level as per site conditions. Cost of the same shall be included in the Panel itself.

i) 1No - 80A, 415V gr. 36KA, 4P, MCCB

ii) 1Set - RYB indicating lamps of LED module with 6A, 230V,10KA, SP MCB.

i) 1No - 32A 415V gr. 10KA TPN MCB

ii) 6Nos - 20A 240V gr. 10KA DP MCB

iii) 2sets - 20A 240V gr. 10KA DP MCB with 2Nos of 6/16A socket with independent 16A switch.

i) 1-no 32A 415V gr 10KA 4P MCB.

ii) 1Set - RYB indicating lamps of LED module with 6A, 230V, 10KA, SP MCB.

i) 2sets - 20A 240V gr. 10KA DP MCB with 2Nos of 6/16A socket with independent 16A switch.

ii) 5Nos - 16A 240V gr. 10KA DP MCB

2.4 Supply, Installation, Testing & commissioning of Outdoor LT Panel (IEC 60439 Standard PTTA Panel) (Outdoor Type) 2.00 Nos 80880.51 Rupees Eighty Thousand Eight Hundred Eighty and Fifty One Paise Only 161761.02

i) 1no - 125A 415V gr 4P 50KA, TM based MCCB.

ii) Lot - 150A, 4P, 415V, short circuit rated 50KA for 1sec, Aluminium bus bars with busbar insulators, heat shrinkable PVC sleeves etc.

iii) 1Nos- Multi function meter (MFM/MDM) suitable for 3ph, 4 wire, 240V(L-N), 5A, CL-1, RS 485 Port Digital MFM/MDM of EM6400NG of Schneider or any equivalent make meeting technical specification of above MFM complete in all respect.

iv) 1 Set-125/5A current transformers of class 1 and suitable VA burden for metering.

v) 1No- (0-500V) range 96x96mm flush analog type voltmeter with RYB selector switch

vi) 1No 6A 415V gr TP 50KA MPCB for tapping power for metering and control circuit

vii) 1Set - RYB indicating lamps of LED module with 6A, 230V, 10KA, SP MCB.

viii) 1Set- 6A, 230V, 10KA, SP MCB for the protection of measuring instruments.

i) 3Nos - 63A 415V gr. 10KA TPN MCB

ii) 3Nos - 40A 415V gr. 10KA TPN MCB

2.5 Supply, Installation, Testing & commissioning of Outdoor Timer Panel (IEC 60439 Standard PTTA Panel) (Outdoor Type). 3.00 Nos 59158.47 Rupees Fifty Nine Thousand One Hundred Fifty Eight and Forty Seven Paise Only 177475.41

i) 1no - 40A 415V gr 4P 10KA, MCB

ii) 1No- Modular digital time switch for street light/Building light control of Legrand Alpha Rex 3 D21 or equivalent approved make with two channel daily cycle unit suitable for daily programming to switch ON & OFF and operate on 230V single phase supply.

iii) 1No-25A, Modular type Power contactor with suitable NO & NC to operate on 230V Single phase supply.

i) 4Nos - 16A 415V gr. 10KA TPN MCB

Uninterrupted Power supply(UPS)

3 Supply, Installation, testing & commissioning of 20KVA On-Line UPS systems with 3 phase Input & 3Phase Output including SMF batteries, battery stand and all accessories. 1.00 No 289637.29 Rupees Two Lakh Eighty Nine Thousand Six Hundred Thirty Seven and Twenty Nine Paise Only 289637.29

Supplying, installation, testing & Commissioning of 20KVA capacity at full load, parallel operation facility for both (Unity Power Factor) at operating temperature 0 to 40 deg C, Relative humidity 0 to 95%, Online double convertion true sine wave Uninterrupted hot swapable (allow for the replacement or addition of battery modules without shutting down the entire system) modular Power Supply (UPS) system with N+1 modules (N denotes total number of modules required for rated capacity). The UPS shall include a Rectifier, inverter, battery bank suitable for 30 minutes back up (Battery VAH capacity shall be as per CPWD specification) on full load (Battery shall be VRLA, SMF in ABS Container) and Static Bypass switch alongwith provision for manual bypass, suitable isolation transformer for additional protection against neutral faults etc. UPS shall have inbuilt phase sequence correction. The UPS systems offered are to to be of the latest technology with Digital Control Microprocessor based for reliable operation using Insulated Gate Bipolar Transister (IGBT)'s both for the rectifier & inverter (3Level) with PWM (Pulse Width Modulation). The quality of design, manufacturing and inspection process should confirm to the relevant Inter-national Standards such as IEC/EN/VDE. The operating efficiency of the UPS Systems shall be >96% while operating on battery mode and delivering quality power to the 100% non-linear loads. Current total harmonic effect (ITHD) on the input grid shall be < 5% at 50% load. (The required LC (indicator (L) and a capacitor (C)) filters shall be included in UPS cost),

extreme power factor kit to be included to limit the input power factor (PF) to 0.99 and output power factor shall be unity (i.e. kw rating of the UPS shall be kva rating x 1), however UPS shall be suitable to take load at 0.7 laging to 0.7 leading power factor loads. UPS shall be suitable for incoming supply AC: 3Phase 400V+/-20%, 50 Hz +/-5 Hz, AC Output voltage: 3Phase 415 Volt, 50 Hz +/- 0.2Hz, Overload capacity of 120% for 10 mins, Sine wave output. Non condensing, noise level less than 60db at 1 meter distance, protections: Input Under voltage over voltage, abnormal out voltage, battery over charging, output over current, short circuit protection, battery deep discharge protection, 10KV surge, UPS must comply with low voltage electromagnetic compatibility (EMC) achieved as per EN 6204, EN6204 Part I and Part 2, it shall be a Voltage and Frequency Independent (VFI)-type UPS. Communication RS232/RS485/SNMP port open protocol for BMS integration, all hardware & software for iOT Communication as per approved by Engineering in charge. Required battery racks and interconnecting copper conductor cables of suitable size and connectors and all required accessories are inclusive of the cost). This system must provide a means for logging and alarming of all monitored points plus email notification. Forced air-cooling with integral inbuilt fans with redundancy (if one fan fail UPS should be able to handle at least 80% of the load, Noice Level 65 DB at 1 meter distance. The system shall be in compliance IEC 62040-1,2 & 3, IS: 16242 and as per CPWD Specification.

Display Panel (minimum) (In-build 5 inch or more LC Display/LED) to display : a) Input : Voltage, current , Frequency. b) Bypass:Voltage, Frequency. c) Output: Voltage, frequency, Current. d) Battery: Voltage, capacity. e) Load: KVA, KW, Percentage, f) Temperature: STS, Inverter, PFC. g) Event Logging & Statistical Data (On LCD/LED): UPS should capture and display to 3000 events like: Over temperature/DC Bus Fail/Fan Fail/Fuse Fail/ Overload/Short-circuit/Device Fail/Inverter Fail/Rectifier Fail / Bypass Fail, etc. h) Statistical Data: No. of power failures/Transfers to Bypass/Total Running time etc. i) Mains Mode of operation and discharging, overload, battery and battery capacity. j) Audible Alarms : Mains Failure, Battery Low alarm, UPS overload, Fault shutdown, Input Over Under Voltage, Output Over, Under Voltage, Battery over, Under Voltage, over load and short circuit, Over Temperature. The UPS should have QR code which should contain drawing, test report OEM manual, Geo-Tag of manufacturing location etc.(Note : Online20KVA UPS rates shall be inclusive of following items :i) Min 8 nos -Battery 12V, 150AH as per CPWD specification.(ii)Battery Rack for min 8nos of battery and i/c connections as per CPWD specification.)

Light fixtures, fans and exhaust fans

4 Supply, fixing to/suspending from existing MS perlins/ ceiling at approx. 12-15 mtr height, using suitable MS angle frame work including necessary fixing hardwares etc., as per site requirement, testing & commissioning of industrial type highbay LED lighting fixture of wattage not exceeding 150watts made out of high pressure diecast aluminium housing, diffuser made of high grade toughened glass(or as per OEM standards), integral control gear, eye hook etc., . The technical parameters of lighting fixtures are as below: The luminaire should have Lumen efficacy ≥ 150lm/watt and lumen output not less than 22500lumens, PF>0.90 and Colour temprature shall be ≥5700K, THD <10%, operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V, Open Circuit protection, Over Voltage protection, Surge Voltage protection upto 10KV including necessary interconnections between driver and lighting fixtures and other standard accessories complete in all respects and as directed by Engineer in-charge. The fitting may be of Havells model no: SAUCERGENXADVPROHBP150WLED857 EPWBBORL/ Equivalent model in other approved makes. LED used in the lighting fixtures should be one of the approved make. LM79 certification for luminares & LM80 certificate for LED shall be produced. Note: MS supports will be paid separately. 26.00 Nos 17412.71 Rupees Seventeen Thousand Four Hundred Twelve and Seventy One Paise Only 452730.46

5 Supplying, installation, Testing & commissioning of 36W Panel light 2x2 ft., of Extruded aluminum (Thickness > 1.20mm) body material and construction as per IS:10322 with driver as per the requirement with Driver efficiency>85%, Operating voltage AC 140-270 Volt, freq 50/60 Hz, operating temp range-15 deg to 40 deg centigrade, internal surge protection of 2.5kV with Short circuit & Open circuit protection, THD <10%, P.F.≥0.95, IP20, CRI>80, UGR(unified Glare Rating) < 19, Flicker free, (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning hours with , 70% of initial Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K / 6000°K / 6500°K (As per ANSI Bin), SDCM(Standard deviation color Matching)<3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate (T.C). Manufactures word mark/name Engraved/ Embossing/ Screen printing on housing. Complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with minimum 5 year OEM warranty. System lumen Efficacy ≥120<135 lm/watt output. LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement.(Thermal management : heat sink of aluminum housing such that LED junction temperature shall not rise above 90° C) 10.00 Nos 2504.24 Rupees Two Thousand Five Hundred Four and Twenty Four Paise Only 25042.40

6 Supplying, installation, Testing & commissioning of 15W LED Recessed/surface Down lighter (Round / square / Rectangular) SMD type Powder coated die cast /Extruded aluminum body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with driver efficiency >85%, Operating voltage AC 140-270volt, freq 50/60 Hz, operating temp range-15 deg to 40 deg centigrade internal surge protection of 2.5KV with Short & Open circuit protection, THD <10%, P.F≥0.95, IP20, CRI>80, UGR (Unified Glare Rating)<19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), life time of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700CK / 6000°K / 6500°K (As per ANSI Bin), SDCM(Standard deviation color Matching)<3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate (T.C). Manufactures word mark/name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. Complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. As required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/watt output. LM79 & LM80 Test report from NABL Lab for all testing required for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer - In – Charge as per requirement.(Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90C) 6.00 Nos 600.00 Rupees Six Hundred Only 3600.00

7 Supplying, installation, Testing & commissioning of 18W LED Recessed/surface Down lighter (Round / square / Rectangular) SMD type Powder coated die cast /Extruded aluminum body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with driver efficiency >85%, Operating voltage AC 140-270volt, freq 50/60 Hz, operating temp range-15 deg to 40 deg centigrade internal surge protection of 2.5KV with Short & Open circuit protection, THD <10%, P.F≥0.95, IP20, CRI>80, UGR (Unified Glare Rating)<19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), life time of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700CK / 6000°K / 6500°K (As per ANSI Bin), SDCM(Standard deviation color Matching)<3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate (T.C). Manufactures word mark/name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. Complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. As required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/watt output. LM79 & LM80 Test report from NABL Lab for all testing required for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer - In – Charge as per requirement.(Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90C) 7.00 Nos 793.22 Rupees Seven Hundred Ninety Three and Twenty Two Paise Only 5552.54

8 Supplying, installation, Testing & commissioning of 40W LED surface mounted Batten light, Powder coated die cast / Extruded aluminium Body (Thickness > 1.20 mm) body material and construction as per IS:10322 with driver (Replaceable) as per the requirement with Driver efficiency > 85%, Operating voltage AC 140-270 Volt, freq 50/60hz, Operating temp range-15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection, THD<10%, P.F≥0.95, IP20, CRI>80, Flicker free, (flicker should be below 5%), life time (LED, Driver & electrical circuitary), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends, CCT 3000◦K/4000◦K/5700◦K/6000◦K/6500◦K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate (T.C). Manufacturers Word Mark/Name Engraved/Embossing/Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. Complete in all respect i/c connections with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105<120 lm/Watt output. LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90◦C). 48.00 Nos 654.24 Rupees Six Hundred Fifty Four and Twenty Four Paise Only 31403.52

9 Supplying, installation, Testing & commissioning of 20W LED surface mounted Batten light, Powder coated die cast / Extruded aluminium Body (Thickness > 1.20 mm) body material and construction as per IS:10322 with driver (Replaceable) as per the requirement with Driver efficiency > 85%, Operating voltage AC 140-270 Volt, freq 50/60hz, Operating temp range-15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection, THD<10%, P.F≥0.95, IP20, CRI>80, Flicker free, (flicker should be below 5%), life time (LED, Driver & electrical circuitary), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends, CCT 3000◦K/4000◦K/5700◦K/6000◦K/6500◦K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate (T.C). Manufacturers Word Mark/Name Engraved/Embossing/Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. Complete in all respect i/c connections with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105<120 lm/Watt output. LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90◦C). 18.00 Nos 616.10 Rupees Six Hundred Sixteen and Ten Paise Only 11089.80

10 Supplying, installation, Testing & commissioning of 200W LED Flood light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270Volt AC, freq 50/60 hz, Operating temp range - 15deg to 50 deg centigrade, internal surge protection of 5 KV L, N,E as per IEC 61000-4-5, Driver efficiency >85%, THD < 10% as per IEC 61000-3-2, P.F.≥0.95, IP-66, IK-10, CRI > 80, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg-120deg as per the application and the project requirement deg, suitable tilt able fitting, life time (LED, Driver and Electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700CK / 6000°K(As per ANSI Bin), SDCM(Standard deviation color Matching)<5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/watt output. LM79 & LM80 Test report from NABL Lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer - In – Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C) 4.00 Nos 3967.80 Rupees Three Thousand Nine Hundred Sixty Seven and Eighty Paise Only 15871.20

11 Supply, fixing directly to the ceiling/wall testing and commissioning of 10W LED bulkhead light fitting with die cast aluminium body with Poly carbonate front cover, including driver, the driver shall have PF >0.9 and Colour temprature shall be >5600K, IP65 rated THD <20% operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V including necessary interconnections between driver and lighting fixtures complete in all respect and as directed by EIC. The lighting fixture shall be of Crompton model no: LBHE-10-WW/Equivalent make in other approved makes. 16.00 Nos 1958.47 Rupees One Thousand Nine Hundred Fifty Eight and Forty Seven Paise Only 31335.52

12 Supplying, installation, Testing & commissioning of 1200mm, BEE 5 star rated ceiling fan with Brush Less Direct Current(BLDC) Motor, class of insulation: B, 3 nos. metal(aluminum alloy) blades, 30cm long down rod, 2nos canopies, shackle kit, safety rope, copper winding, steel/Al body, Power Factor not less than 0.9, Service Value (CM/Min/Watt) > 6.0, minimum air delivery 210CM/Min, 350RPM (tolerance as per IS:374-2019), THD(Total Harmonic Distortion) less than 10%, remote for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max.), insulation resistance more than 2 mega ohm, suitable for 230V, 50Hz, single phase AC Ceiling fan compliant to IS 374:2019 complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. complete as req 4.00 Nos 2017.80 Rupees Two Thousand Seventeen and Eighty Paise Only 8071.20

13 Supply, installation, testing & commissioning of 300mm dia 900 rpm heavy duty exhaust fan of any approved make with louvers, connecting cord with 6A, 3 pin plug top and with all necessary accessories, including making wall openings and replastering to smooth finish with matching paint etc., complete in all respects and as directed by Engineer-in-charge. 12.00 Nos 4731.36 Rupees Four Thousand Seven Hundred Thirty One and Thirty Six Paise Only 56776.32

14 Supply and fixing of weather proof cable junction box with terminals of size 104 mm x 104 mm x 70 mm Hensel Cat. No. DK 0402G or equivalent in Legrand/ Schneider/ Hagar make only. The Box shall be mounted on the wall/truss using suitable size MS angle frame work with painting as per EIC, with cable entry knock-outs, including rigid support for all components, Din channel, required fasteners totally enclosed, dust and vermin proof and degree of protection shall not be less than IP-65 complete in all respects and as directed by Engineer-in-charge. 26.00 Nos 1156.78 Rupees One Thousand One Hundred Fifty Six and Seventy Eight Paise Only 30076.28

Street Lighting

15 Supply, fixing on existing foundation, installation, testing and commissioning of 9 metre Octagonal pole of 3mm thickness with 70mm top diameter and 130mm bottom diameter. The Base plate size should be of 200X200 mm with 16mm thickness. Material of pole sections are hot rolled MS Plate of BS EN 10025 : 2019, Grade S355, IS 2062 : 2011 Grade E350 and for Base plate and foundation bolt as per IS 2062 : 2011, Grade E250 A. Metal protection with hot dip galvanized as per is 4759 : 1996 / IS 2629 : 1985. The foundation bolt size should be of M20X600. The scope includes supply & fixing of heavy duty 32A terminal connectors for loop-in / loop-out arrangement at bottom of the inside pole to terminate cable of size 2runs of 4C x 10sq.mm Aluminium arm cable and 3Cx1.5/2.5Sqmm copper cable including suitable Al/Cu lugs. Make:-Bajaj/ Philips/ Wipro/ Lighting Technologies/ Havells/ crompton Greaves. Note:1-Scope of work includes supply and fixing of Base plate and Foundation J bolts and nuts. 2.Civil works for the Foundation will be measured seperately is considered under Civil scope of work. 39.00 Nos 19505.08 Rupees Nineteen Thousand Five Hundred Five and Eight Paise Only 760698.12

16 Supply, fixing on existing foundation, installation, testing and commissioning of 6 metre Octagonal pole of 3mm thickness with 70mm top diameter and 130mm bottom diameter. The Base plate size should be of 200X200 mm with 12mm thickness. Material of pole sections are hot rolled MS Plate of BS EN 10025 : 2019, Grade S355, IS 2062 : 2011 Grade E350 and for Base plate and foundation bolt as per IS 2062 : 2011, Grade E250 A. Metal protection with hot dip galvanized as per is 4759 : 1996 / IS 2629 : 1985. The foundation bolt size should be of M20X600. The scope includes supply & fixing of heavy duty 32A terminal connectors for loop-in / loop-out arrangement at bottom of the inside pole to terminate cable of size 2runs of 4C x 10sq.mm Aluminium arm cable and 3Cx1.5/2.5Sqmm copper cable including suitable Al/Cu lugs. Make:-Bajaj/ Philips/ Wipro/ Lighting Technologies/ Havells/ crompton Greaves. Note: 1-Scope of work includes supply and fixing of Base plate and Foundation J bolts and nuts. 2.Civil works for the Foundation will be measured seperately is considered under Civil scope of work. 3.00 Nos 15209.32 Rupees Fifteen Thousand Two Hundred Nine and Thirty Two Paise Only 45627.96

17 Supply & installation of Double arm bracket of 1500mm length on existing 9/6mtr HDG octagonal pole incuding necessary harware as per site requirment as directed by E-I-C. 42.00 Nos 5050.00 Rupees Five Thousand Fifty Only 212100.00

18 Supplying, installation, Testing & commissioning of 90W Street light LED fixture powder coated pressure die cast aluminum body with driver as per the requirement with Driver efficiency>85%, Input Voltage: 140-270 Volt, AC freq 50/60 Hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5KV L,N,E as per IEC 61000-4-5, Driver efficiency>85%, THD<10% as per IEC 61000-3-2, P.F ≥0.95, IP-66, IK-10,CRI>80, under voltage and over voltage protection, EMI-EMC As per CISPR 15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700CK / 6000°K / 6500°K (As per ANSI Bin), SDCM(Standard deviation color Matching)<5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. As required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/watt output. LM79 & LM80 Test report from NABL Lab for all testing required for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer - In – Charge as per requirement.(Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°) 56.00 Nos 1973.73 Rupees One Thousand Nine Hundred Seventy Three and Seventy Three Paise Only 110528.88

19 Supplying, Installation, Testing & commissioning of 120W Street light LED fixture powder coated pressure die cast aluminum body with driver as per the requirement with Driver efficiency>85%, Input Voltage: 140-270 Volt, AC freq 50/60 Hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5KV L,N,E as per IEC 61000-4-5, Driver efficiency>85%, THD<10% as per IEC 61000-3-2, P.F ≥0.95, IP-66, IK-10,CRI>80, under voltage and over voltage protection, EMI-EMC As per CISPR 15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm die pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700CK / 6000°K / 6500°K (As per ANSI Bin), SDCM(Standard deviation color Matching)<5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. As required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/watt output. LM79 & LM80 Test report from NABL Lab for all testing required for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer - In – Charge as per requirement.(Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°) 28.00 Nos 2501.69 Rupees Two Thousand Five Hundred One and Sixty Nine Paise Only 70047.32

20 Supply, installation, testing and commissioning of outdoor decorative type gate light of wattage not exceeding 45W with minimum lumen output of 4050Lumens on existing concrete post/column including using suitable dia class B GI pipe of min 0.3Mtr length with necessary painting, fixing hardwares and interconnections chipping the concrete, reconcreting and finishing to match the original finish, painting if any complete in all respects as directed by Engineer In-charge. Light fixture may be of Bajaj make model no. BAJAJ Auracrest 45W 30K 9 C3 S or equivalent of HAL approved makes. 4.00 Nos 18356.78 Rupees Eighteen Thousand Three Hundred Fifty Six and Seventy Eight Paise Only 73427.12

21 Supply and fixing of weather proof cable junction box with terminals of size 205 X 225 X 122( suitable for 10 - 25 sqmm cable) Hensel DK 2525G or equivalent in Legrand/ Schneider/ Hagar make. The Box shall be mounted at suitable height on the pole/wall/column using suitable size MS angle frame work(including) with painting as per EIC, with cable entry knock-outs, including rigid support for all components, Din channel, required fasteners totally enclosed, dust and vermin proof and degree of protection shall not be less than IP-65 complete in all respects and as directed by Engineer-in-charge. 4.00 Nos 6000.00 Rupees Six Thousand Only 24000.00

22 Distribution Boards

Supply, fixing, testing & commissioning of the following factory built powder coated Double door MCB/MCCB DB of any approved make fabricated out of M.S. sheet steel enclosure & necessary cutouts for operating the MCB knobs & comprising of 200 amps tinned copper busbars & earthing bus with tapped holes including internal wiring with stranded copper PVC wires or suitable size copper strips etc. & fixing the DB in flush with wall/ on wall as per site requirement including with necessary M.S. angle supports, chipping the wall and replastering to smooth finish etc., wherever required as per site condition, complete in all respects, as directed by Engineer-in-charge and comprising the following as detailed below:

a) 8way VTPN MCCB DB. 1.00 No 12816.10 Rupees Twelve Thousand Eight Hundred Sixteen and Ten Paise Only 12816.10

b) 4way VTPN MCCB DB. 1.00 No 10477.12 Rupees Ten Thousand Four Hundred Seventy Seven and Twelve Paise Only 10477.12

c) 4way VTPN MCB DB 2.00 Nos 7771.85 Rupees Seven Thousand Seven Hundred Seventy One and Eighty Five Paise Only 15543.70

d) 6 way HTPN MCB DB 1.00 No 5146.05 Rupees Five Thousand One Hundred Forty Six and Five Paise Only 5146.05

e) 4 way HTPN MCB DB 2.00 Nos 4232.51 Rupees Four Thousand Two Hundred Thirty Two and Fifty One Paise Only 8465.02

f) 12 way SPN MCB DB 6.00 Nos 2395.08 Rupees Two Thousand Three Hundred Ninety Five and Eight Paise Only 14370.48

23 MCCBs, MCBs & RCBO

Supply, fixing, testing & commisisoning of following rating MCCB/MCB/RCBO in the existing Distribution board/powder coated enclosure as directed by Engineer-in-Charge.

a) 100-125A, 25KA, FP 415V, MCCB 1.00 No 8159.32 Rupees Eight Thousand One Hundred Fifty Nine and Thirty Two Paise Only 8159.32

b) 63A, 25KA, FP 415V, MCCB 1.00 No 6509.32 Rupees Six Thousand Five Hundred Nine and Thirty Two Paise Only 6509.32

c) 40-63 amps. ratings, FP MCB, "C" curve, 10 KA breaking capacity. 11.00 Nos 1638.98 Rupees One Thousand Six Hundred Thirty Eight and Ninety Eight Paise Only 18028.78

d) 40-63 amps. ratings, TP MCB, "C" curve, 10 KA breaking capacity. 5.00 Nos 1322.03 Rupees One Thousand Three Hundred Twenty Two and Three Paise Only 6610.15

e) 5A to 32A TP MCB 10kA , C Curve 10.00 Nos 1041.83 Rupees One Thousand Forty One and Eighty Three Paise Only 10418.30

f) 5A to 32A SP MCB 10kA , C Curve 150.00 Nos 264.85 Rupees Two Hundred Sixty Four and Eighty Five Paise Only 39727.50

24 Powder coated enclosure with MCBs/MCCBs/SDFUs

a) Supply, fixing on wall/grouting to floor upto 1200mm above ground level as per site requirement using suitable size MS angle iron frame work finished with two coats of enamel spray paint over a good primer, testing and commissioning of 125A 25kA 4P 415V gr. MCCB in a factory built powder coated sheet steel enclosure, MCCB shall be adjustable with thermal settings (80% to 100%), overload and short circuit releases including door interlocking device, front operating handle complete,ON and OFF indication of LED module etc., complete in all respects. including suitable cable end box(incoming/outgoing) if any required wherever necessary complete in all respects and as directed by Engineer-in-charge. (scope includes MS frame work as per requirement) 1.00 No 12355.08 Rupees Twelve Thousand Three Hundred Fifty Five and Eight Paise Only 12355.08

25 Supply, laying, testing & commissioning of following size Aluminium LT armoured power cables.

Supply & laying in the already excavated cable trench/cable tray/fixing on wall/duct wall with necessary M.S clamps / encasing in pipes etc., testing & commissioning of following size XLPE insulated Aluminium (Al) conductor(stranded) 1.1 KV grade confirming to IS: 7098 ( part-I)/1998 with upto date amendment earthed Armoured (Arm)U.G cables and as per technical specification including stacking at site, proper storage complete etc., as required. (Note:- Excavation, sand & Brick Protection, concrete cutting, reconcreting, casing pipes will be measured separately.)

a) 3.5CX 150 Sqmm Aluminium armoured conductor 40.00 Mtrs 846.54 Rupees Eight Hundred Forty Six and Fifty Four Paise Only 33861.60

b) 3.5CX 120 Sqmm Aluminium armoured conductor 40.00 Mtrs 724.50 Rupees Seven Hundred Twenty Four and Fifty Paise Only 28980.00

c) 3.5CX 95 Sqmm Aluminium armoured conductor 600.00 Mtrs 572.83 Rupees Five Hundred Seventy Two and Eighty Three Paise Only 343698.00

d) 3.5CX 70 Sqmm Aluminium armoured conductor 100.00 Mtrs 468.59 Rupees Four Hundred Sixty Eight and Fifty Nine Paise Only 46859.00

e) 3.5CX 50 Sqmm Aluminium armoured conductor 20.00 Mtrs 359.27 Rupees Three Hundred Fifty Nine and Twenty Seven Paise Only 7185.40

f) 3.5 CX 25 Sqmm Aluminium armoured conductor. 920.00 Mtrs 212.02 Rupees Two Hundred Twelve and Two Paise Only 195058.40

g) 4CX 10 Sqmm Aluminium armoured conductor 1400.00 Mtrs 174.73 Rupees One Hundred Seventy Four and Seventy Three Paise Only 244622.00

26 Supply, laying, testing & commissioning of following size Copper LT armoured power cables.

Supply & laying in the already excavated cable trench/cable tray/fixing on wall/duct wall with necessary M.S clamps / encasing in pipes etc., testing & commissioning of following size XLPE insulated Copper (cu) conductor 1.1 KV grade confirming to IS: 7098 (part-I)/1998 with upto date amendment earthed Armoured (Arm)/Unarmoured (Unarm) U.G cables and as per technical specification including stacking at site, proper storage complete etc. as required. (Note:- Excavation, sand & Brick Protection, concrete cutting, reconcreting, casing pipes will be measured separately.)

a) 4C X 16 Sqmm Copper armoured conductor LT Power Cable 35.00 Mtrs 932.36 Rupees Nine Hundred Thirty Two and Thirty Six Paise Only 32632.60

b) 4C X 10 Sqmm Copper armoured conductor LT Power Cable 70.00 Mtrs 614.56 Rupees Six Hundred Fourteen and Fifty Six Paise Only 43019.20

c) 4C X 6 Sqmm Copper armoured conductor LT Power Cable 125.00 Mtrs 390.83 Rupees Three Hundred Ninety and Eighty Three Paise Only 48853.75

d) 3C X 2.5 Sqmm Copper armoured conductor LT Control Cable 350.00 Mtrs 171.34 Rupees One Hundred Seventy One and Thirty Four Paise Only 59969.00

e) 3C X 2.5 Sqmm Copper Unarmoured conductor LT Cable including necessary copper lugs. 1000.00 Mtrs 157.78 Rupees One Hundred Fifty Seven and Seventy Eight Paise Only 157780.00

27 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE armoured aluminium conductor cable of 1.1 KV grade as required

a) 3.5C X 150 sq. mm Al arm cable 2.00 Nos 721.11 Rupees Seven Hundred Twenty One and Eleven Paise Only 1442.22

b) 3.5C X 120 sq. mm Al arm cable 2.00 Nos 634.20 Rupees Six Hundred Thirty Four and Twenty Paise Only 1268.40

c) 3.5C X 95 sq. mm Al arm cable 4.00 Nos 608.34 Rupees Six Hundred Eight and Thirty Four Paise Only 2433.36

d) 3.5C X 70 sq. mm Al arm cable 2.00 Nos 484.19 Rupees Four Hundred Eighty Four and Nineteen Paise Only 968.38

e) 3.5C X 50 sq. mm Al arm cable 2.00 Nos 427.28 Rupees Four Hundred Twenty Seven and Twenty Eight Paise Only 854.56

f) 3.5C X 25 sq. mm Al arm cable 30.00 Nos 323.82 Rupees Three Hundred Twenty Three and Eighty Two Paise Only 9714.60

g) 4C X 10 sq. mm Al arm cable 24.00 Nos 278.31 Rupees Two Hundred Seventy Eight and Thirty One Paise Only 6679.44

28 Supplying and making end termination with brass compression gland and Copper lugs for following size of PVC insulated and PVC sheathed / XLPE armoured copper conductor cable of 1.1 KV grade as required

a) 4Cx16Sqmm Armoured Copper cable 4.00 Nos 480.00 Rupees Four Hundred Eighty Only 1920.00

b) 4Cx10Sqmm Armoured Copper cable 4.00 Nos 360.00 Rupees Three Hundred Sixty Only 1440.00

c) 4Cx6Sqmm Armoured Copper cable 4.00 Nos 280.00 Rupees Two Hundred Eighty Only 1120.00

d) 3C X 2.5 Sqmm Copper Armoured LT Cable End Joint 52.00 Nos 170.00 Rupees One Hundred Seventy Only 8840.00

29 Wiring for light point / fan point / exhaust fan point/call bell point from nearest switch box with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, fan regulator, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (as per detailed CPWD specifications for Group C wiring)

a) Wiring to single light point/Fan point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects. 41.00 Pts 1517.75 Rupees One Thousand Five Hundred Seventeen and Seventy Five Paise Only 62227.75

b) Wiring to two light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects. 34.00 Pts 2405.42 Rupees Two Thousand Four Hundred Five and Forty Two Paise Only 81784.28

c) Wiring to exhaust fan point using 6A, 250V gr. flush type modular SP switch housed along with other lighting switches/separate switch box if required and 3pin 6A, 250V gr. modular type socket housed near the exhaust fan complete in all respects. 12.00 Pts 1517.75 Rupees One Thousand Five Hundred Seventeen and Seventy Five Paise Only 18213.00

d) Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 4.00 Pts 381.76 Rupees Three Hundred Eighty One and Seventy Six Paise Only 1527.04

e) Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required 14.00 Nos 493.50 Rupees Four Hundred Ninety Three and Fifty Paise Only 6909.00

f) Supplying and fixing following suitable size GI Box with modular plate and cover on front on surface or in recess, including providing and fixing 6 pin 5/6A & 15/16A modular socket outlet and 15/16 A modular switch, connections etc., as required. 40.00 Nos 606.26 Rupees Six Hundred Six and Twenty Six Paise Only 24250.40

g) Supplying and fixing following suitable size GI Box with modular plate and cover on front on surface or in recess, including providing and fixing 6sets of 6 pin 5/6A & 15/16A modular socket outlet and 15/16 A modular switch, connections etc., as required. 8.00 Nos 3637.62 Rupees Three Thousand Six Hundred Thirty Seven and Sixty Two Paise Only 29100.96

30 Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

a) 3 x 2.5 sq. mm (For lighting ckt from DB to Switch box, For 6A power Points) 440.00 Mtrs 284.52 Rupees Two Hundred Eighty Four and Fifty Two Paise Only 125188.80

b) 3 x 4 sq. mm(For 16A power points & 20A powerpoints) 850.00 Mtrs 345.55 Rupees Three Hundred Forty Five and Fifty Five Paise Only 293717.50

31 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

a) 20MM PVC Conduit 220.00 Mtrs 132.42 Rupees One Hundred Thirty Two and Forty Two Paise Only 29132.40

b) 25MM PVC Conduit 280.00 Mtrs 150.02 Rupees One Hundred Fifty and Two Paise Only 42005.60

c) 32MM PVC Conduit 50.00 Mtrs 190.36 Rupees One Hundred Ninety and Thirty Six Paise Only 9518.00

32 Supply, fabricating and installing of Following size perforated GI cable trays with cover including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling/fixing to the wall/RCC beam/iron structures as per site requirement complete in all respects and as directed by Engineer in charge. (Note:-M.S. angle supports will be measured separately).

a) Supply, fabricating and installing of 100 x 50 x 2mm thick cable tray with 1.6mm thick cover. 60.00 Mtrs 535.00 Rupees Five Hundred Thirty Five Only 32100.00

b) Supply, fabricating and installing of 200 x 50 x 2mm thick cable tray with 1.6mm thick cover. 20.00 Mtrs 820.00 Rupees Eight Hundred Twenty Only 16400.00

a) Supply & providing earth stations using 600x600x3.15mm thick copper plate electrode complete at 2.5 mtr. below the ground level with 20mm dia class B G.I pipe for watering, G.I funnel etc. & Cement concrete base of minimum size 750x750x100mm thick shall be provided using 1:2:6 CC after necessary excavation, refilling of soil, consolidating, ramming, leveling of soil etc. and providing cement concrete chamber of inside dimension 300x300x300mm with a wall thickness of 120mm using 1:2:6 CC above the base concrete including providing 50mm thick RCC cover including required salt & charcoal, 2runs of 50x6 mm(300mm) copper strip from plate electrode upto top of the chamber etc. as per technical specification enclosed with the tender documents & as per IS 3043 complete in all respects. 6.00 Sets 24000.00 Rupees Twenty Four Thousand Only 144000.00

b) Supply & providing GI earth stations using 600 x 600x 6.3 mm thick G.I plate electrode at 2.5 mtr below the ground level with 20mm dia class B G.I pipe for watering, G.I funnel etc. & Cement concrete base of minimum size 750x750x100mm thick shall be provided using 1:2:6 CC after necessary excavation, refilling of soil, consolidating, ramming, leveling of soil etc. and providing cement concrete chamber of inside dimension 300x300x300mm with a wall thickness of 120mm using 1:2:6 CC above the base concrete including providing 50mm thick RCC cover including required salt & charcoal, 2 runs of 50x6 mm G.I strip from plate electrode upto top of the chamber etc. as per technical specification enclosed with the tender & as per IS 3043 complete in all respects. 23.00 Sets 12500.00 Rupees Twelve Thousand Five Hundred Only 287500.00

c) Supply, fixing & connecting the 50X6mm size G.I strip on wall / clamping to the existing duct wall / fixing on steel structures/ laying 2 ft. below the ground level with necessary excavation, concrete cutting & re-concreting, refilling, consolidation & levelling of soil after laying for interconnection between the earth pits and the LT & HT panels earthing & Transformer body earthing as directed by Engineer-in-charge. Note:- Excavation, concrete cutting & re concreting will be measured separately. 400.00 Mtrs 420.00 Rupees Four Hundred Twenty Only 168000.00

d) Supply, fixing & connecting the 40X6mm size Copper strip on wall / clamping to the existing duct wall / laying in cable tray/ laying 2 ft. below the ground. level with necessary excavation, concretecutting & re-concreting, refilling, consolidation & levelling of soil after laying for interconnection between the earth pits and transformer neutral as directed by Engineer-in charge. Note:- Excavation, concrete cutting & re-concreting will be measured separately. 80.00 Mtrs 2800.00 Rupees Two Thousand Eight Hundred Only 224000.00

e) Supplying & laying 25 mm X 5 mm GI strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of GI nut bolt & spring washer spaced at 50mm) 140.00 Mtrs 148.98 Rupees One Hundred Forty Eight and Ninety Eight Paise Only 20857.20

f) Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) 30.00 Mtrs 1005.63 Rupees One Thousand Five and Sixty Three Paise Only 30168.90

g) Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. 150.00 Mtrs 43.46 Rupees Forty Three and Forty Six Paise Only 6519.00

h) Supply and embedding 1mtr long 20mm dia class B GI pipe inside the earth near street light pole foundation including supply and connecting 6SWG GI wire in sprilled form of dia 90-100 mm and having minium 10nos of rings. One end to GI wire to be conected to stree light pole earthing point and other end to be connected to GI pipe which is embeded in the earth complete as per the direction of Engineer in Charge. 45.00 Sets 403.49 Rupees Four Hundred Three and Forty Nine Paise Only 18157.05

34 Sand & Brick Protection

a) Supplying and providing 75mm thick sand around the LT 1.1 KV/HT grade armoured U G cables including providing the well burnt brick covering on sides and top of the cable as per standard practice for 2R of cables. 100.00 Mtrs 630.00 Rupees Six Hundred Thirty Only 63000.00

b) Supplying and providing 75mm thick sand around the LT 1.1 KV/HT grade armoured U G cables including providing the well burnt brick covering on sides and top of the cable as per standard practice for 1R of cables. 460.00 Mtrs 300.00 Rupees Three Hundred Only 138000.00

a) Supply and laying of 63mm dia, PE-80, PN6 ISI marked HDPE pipe confirming to IS 4984:1995 including suitable jointing using welding as required in the excavated trench/duct/at road crossings for encasing cables complete in all respect as directed by Engineer-in-charge. 700.00 Mtrs 122.55 Rupees One Hundred Twenty Two and Fifty Five Paise Only 85785.00

b) Supply and laying of 50mm dia, PE-80, PN6 ISI marked HDPE pipe confirming to IS 4984:1995 including suitable jointing using welding as required in the excavated trench/duct/at road crossings for encasing cables complete in all respect as directed by Engineer-in-charge. 2350.00 Mtrs 83.05 Rupees Eighty Three and Five Paise Only 195167.50

c) Supply and laying of 32mm dia, PE-80, PN8 ISI marked HDPE pipe confirming to IS 4984:1995 including suitable jointing using welding as required in the excavated trench/duct/at road crossings for encasing cables complete in all respect as directed by Engineer-in-charge. 300.00 Mtrs 50.14 Rupees Fifty and Fourteen Paise Only 15042.00

36 Excavation in all types of soil for Cable trench including refilling, consolidating of soil after laying the cable including ramming and levelling to smooth finish as per the Technical specifications enclosed and as directed by the Engineer-in-charge. 425.00 Cu.Mtrs 510.25 Rupees Five Hundred Ten and Twenty Five Paise Only 216856.25

37 Concrete cutting/Chipping/Bitumen Road the existing 1:2:4 cement concrete road /pavements / flooring / rock/stone etc., including removing debris from the work site and depositing in the place as directed by EIC 2.00 Cu.Mtrs 2304.58 Rupees Two Thousand Three Hundred Four and Fifty Eight Paise Only 4609.16

38 Re-concreting the cut portion/closing the dummy cable duct at same area with 1:2:4 cement concrete by employing 20mm graded aggregate granite to smooth finish including curing and form work if any complete in all respects and as directed. 2.00 Cu.Mtrs 8126.15 Rupees Eight Thousand One Hundred Twenty Six and Fifteen Paise Only 16252.30

39 Design, Fabrication, Supply and fixing/grouting / welding to the existing MS perlins of suitable size MS angle iron supports/ flat/ brackets for fixing High bay light fittings & Cable tray, as per site requirement and painting the same with two coats of synthetic enamel paint over a coat of zinc chromite primer complete in all respects and as directed by EIC/OIC. 250.00 Kgs 111.09 Rupees One Hundred Eleven and Nine Paise Only 27772.50

40 Supply and laying of 160mm dia, PE-100, PN8 ISI marked HDPE pipe confirming to IS 4984:1995 including suitable jointing using welding as required in the excavated trench/duct/at road crossings for encasing cables complete in all respect as directed by Engineer-in-charge. 40.00 Mtrs 329.82 Rupees Three Hundred Twenty Nine and Eighty Two Paise Only 13192.80

a) Supply and laying in the already excavated cable trench/existing duct/fixing on wall/cable tray/ iron supports/HDPE pipe, of 12 core Single Mode armoured, loose-tube, Gel-filled, 9/125 micron Fiber Optic cable, including OTDR testing for OFC cable complete in all respects as per technical specification and as directed by Engineer-in-charge. Approved Make:COMMSCOPE TYCO/ PANDUIT/ MOLEX 600.00 Mtrs 65.00 Rupees Sixty Five Only 39000.00

b) Supply and fixing of wall Mountable 15U Network Rack with 2nos of Power Distribution unit(5 nos of 6/16A sockets in each PDU) and Dual cooling Fan, earthing cable, hardware, cable organizer etc. with all standard Accessories, complete in all respects as per technical specification and as directed by Engineer-in-charge. Approved Make:APC/VALRACK/NETRACK/RITTAL 1.00 No 20000.00 Rupees Twenty Thousand Only 20000.00

c) Supply and fixing of fully Loaded, 24 Port CAT6A UTP Jack Panel, including termination of CAT 6A cables in Jack panel, labelling complete in all respects as per technical specification and as directed by Engineer-in-charge. Approved Make: COMMSCOPE TYCO/ PANDUIT/ MOLEX 1.00 No 5500.00 Rupees Five Thousand Five Hundred Only 5500.00

d) Supply and fixing of 12 Port LIU fiber LC style singlemode, 19-inch Rack mount Patch panel with adapter plates, fiber pig tails, Fully loaded including splicing. complete in all respects and as directed by Engineer-in-charge. Approved Make:COMMSCOPE TYCO/ PANDUIT/ MOLEX 1.00 No 10000.00 Rupees Ten Thousand Only 10000.00

e) Supply and fixing of 24 Port LIU fiber LC style singlemode, 19-inch Rack mount Patch panel with adapter plates, fiber pig tails, Fully loaded including splicing. complete in all respects and as directed by Engineer-in-charge. Approved Make:COMMSCOPE TYCO/ PANDUIT/ MOLEX 1.00 No 15000.00 Rupees Fifteen Thousand Only 15000.00

f) Supply, drawing, testing and submission of test report of Cat 6A UTP 4-Pair cable in the existing PVC conduits inside wall / above false ceiling, including necessary interconnections as directed by Engineer-in-charge. Approved Make: COMMSCOPE TYCO/ PANDUIT/ MOLEX/HAL approved makes 350.00 Mtrs 80.00 Rupees Eighty Only 28000.00

g) Supply, Fixing in flush with wall/on Aluminium partition as per site condition, testing & Commissioning of 2 nos of RJ-45 modular type sockets for Data points including supply of suitable size modular MS/PVC surface mounting box with base plates, glossy finish front covers, labelling etc., with necessary interconnections and chipping the wall, replastering to smooth finish etc., wherever required complete as directed by Engineer-in-charge. Approved Make: COMMSCOPE TYCO/ PANDUIT/MOLEX/Legrand / Schneider/HAL approved makes 12.00 Nos 700.00 Rupees Seven Hundred Only 8400.00

h) Supply and fixing of Route Markers made up of 35x35x5mm Langle (600mm - 700mm length) with name plate of size(200x300x5mm). 2coats of red oxide and one coat of suitable approved colour painting for angle/ plate/markings. Route marker shall be 300mm below the ground level. Rate shall include necessary excavation and concreting for route marker complete in all respects as directed by Engineer-in-charge. 40.00 Nos 1500.00 Rupees One Thousand Five Hundred Only 60000.00

i) Supply, shifting & positioning of Cement Chamber of size 2.5'X2.5' with cover Lid as per site requirements complete in all respects as directed by Engineer-in-charge. 6.00 Nos 9440.00 Rupees Nine Thousand Four Hundred Forty Only 56640.00

j) Supply and laying of 80mm dia class B GI Pipe for encasing cable across the drainage crossings for encasing cable and as per standard practice & as directed by Engineer-in-charge. 20.00 Mtrs 1214.45 Rupees One Thousand Two Hundred Fourteen and Forty Five Paise Only 24289.00

a) Supply & fixing on wall / grouted to floor 1200mm above ground level using suitable size MS angle iron frame work finished with two coats of enamel spray paint over a good primer & providing 100 pair krone type telephone connectors junction box with necessary mounting frame housed in suitable size outdoor type powder coated enclosure box of 16Guage (top canopy cover to avoid stagnation of water) with hinged lockable cover complete in all respects. 2.00 Nos 7650.00 Rupees Seven Thousand Six Hundred Fifty Only 15300.00

b) Supply & fixing on wall/grouted to floor upto 1200mm above ground level as per site requirement using suitable size MS angle iron frame work finished with two coats of enamel spray paint over a good primer & providing 10 pair krone type telephone connector junction box including krone connector/s with necessary mounting frame housed in suitable size FRP box with hinged lockable cover complete in all respects. 1.00 No 800.00 Rupees Eight Hundred Only 800.00

c) Supply, laying in the already excavated cable trench/existing duct/fixing on wall/cable tray/ steel structure using suitable clamps etc./ encasing in pipe, testing and commissioning of 100pair jelly filled armoured copper conductor of 0.5mm dia including both end terminations on the existing krone type junction box complete in all respects and as directed by EIC. 150.00 Mtrs 1200.00 Rupees One Thousand Two Hundred Only 180000.00

d) Supply, laying in the already excavated cable trench/existing duct/fixing on wall/cable tray/ steel structure using suitable clamps etc./ encasing in pipe, testing and commissioning of 10pair jelly filled armoured copper conductor of 0.5mm dia including both end terminations on the existing krone type junction box complete in all respects and as directed by EIC. 20.00 Mtrs 200.00 Rupees Two Hundred Only 4000.00

e) Supply & drawing of 0.5 mm dia copper conductor PVC insulated 4 pair colour coded and twisted unarmoured telecommunication cables in the existing PVC conduit as per standard practice including necessary inter connections & end terminations. 170.00 Mtrs 55.87 Rupees Fifty Five and Eighty Seven Paise Only 9497.90

f) Supply, Fixing, in flush with wall/on wall/on Aluminium partition/on MS angle iron frame as per site condition, suitable size modular MS/PVC box with base plate, glossy front cover for supply and housing of 1 No. of Twin RJ-11 telephone socket outlets with necessary interconnections, chipping the wall and replastering to smooth finish to match the existing wall wherever necessary as per site condition and as directed by Engineer-in-charge. complete in all respects and as directed by Engineer-in-charge. 5.00 Nos 153.12 Rupees One Hundred Fifty Three and Twelve Paise Only 765.60

Sub-Total of Section -1 - Electrical, Data & Voice (Excluding GST) Rupees Eighty Eight Lakh Ninety Six Thousand Ninety Nine and Eighty Two Paise Only 8896099.82

Section -2 - Fire alarm System

43 INTELLIGENT FIRE ALARM SYSTEM

Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per CPWD specifications

a) Two Loop fire Panel as detailed above. 1.00 No 247500.01 Rupees Two Lakh Forty Seven Thousand Five Hundred and One Paise Only 247500.01

b) Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as requiredas per CPWD specifications. 19.00 Nos 2956.86 Rupees Two Thousand Nine Hundred Fifty Six and Eighty Six Paise Only 56180.34

c) Supply and installation of PVC type response indicators with LED indications for above false ceiling detectors and shall comply to BS-5839/EN54/IS2189 standards for installation and product shall be UL / FM / Vds approved. 6.00 Nos 100.00 Rupees One Hundred Only 600.00

d) Supplying, installation, testing & commissioning of fault isolator complete with base as required as per CPWD specifications. 4.00 Nos 3383.11 Rupees Three Thousand Three Hundred Eighty Three and Eleven Paise Only 13532.44

e) Supplying, installation, testing & commissioning of addressable manual call point complete as required as per CPWD specifications. 5.00 Nos 4004.90 Rupees Four Thousand Four and Ninety Paise Only 20024.50

f) Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required as per CPWD specifications. 5.00 Nos 3627.28 Rupees Three Thousand Six Hundred Twenty Seven and Twenty Eight Paise Only 18136.40

g) Supply, installation, integrating with the existing main FACP, testing & Commissioning of Auto dialer with addressable control module connected to main control panel with minimum 10 telephone nos. connectivity working on 24volts supply including connected cabling/wiring complete in all respects, as per technical specification. 1.00 No 12320.00 Rupees Twelve Thousand Three Hundred Twenty Only 12320.00

h) Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. 300.00 Mtrs 178.98 Rupees One Hundred Seventy Eight and Ninety Eight Paise Only 53694.00

Sub-Total of Section - 2 - Fire alarm System (Excluding GST) Rupees Four Lakh Twenty One Thousand Nine Hundred Eighty Seven and Sixty Nine Paise Only 421987.69

Part III - Mechnaical Works

Section-1 - EOT CRANE

1 Design, Manufacturing, transport, Erection, Testing and Commissioning of 2 Ton capacity box type doublegirder, E.O.T crane with a span of 27mtrs (approx), lift height of 8 mtrs, bay length 30 mtrs(approx) complete in all respect and comprising of crab hoist, electrical controls, cabling, as per standard practice and other required accessories etc., complete in all respects as per technical specifications Annexure-I as directed by OIC/EIC. 1.00 Set 3070000.00 Rupees Thirty Lakh Seventy Thousand Only 3070000.00

2 Design, Manufacturing, transport, Erection, Testing and Commissioning of 2Ton capacity box type double girder, E.O.T crane with a span of 14 mtrs (approx), lift height of 6 mtrs, bay length 14 mtrs(approx) complete in all respect and comprising of crab hoist, electrical controls, cabling, as per standard practice and other required accessories etc., complete in all respects as per technical specifications Annexure-I as directed by OIC/EIC.. 1.00 Set 1486350.00 Rupees Fourteen Lakh Eighty Six Thousand Three Hundred Fifty Only 1486350.00

3 Supply, Fixing, Testing and Commissioning of shrouded bus bar 125A- 4 row GI DSL system with all required accessories complete in all respects and as per the technical specifications Annexure-I and as directed OIC/EIC. 44.00 Rmts 1750.00 Rupees One Thousand Seven Hundred Fifty Only 77000.00

4 Supply, Erection and commissioning of 50 MM bright Square bar for above crane with all necessary accessories complete in all respect on both sides to a bay length etc., complete in all respects as per technical specifications Annexure-I as directed by OIC/EIC. 88.00 Rmts 2250.00 Rupees Two Thousand Two Hundred Fifty Only 198000.00

Sub-Total of Part III Section - 1 - EOT CRANE (Excluding GST) Rupees Forty Eight Lakh Thirty One Thousand Three Hundred Fifty Only 4831350.00

Part III - Mechnaical Works

Section-2 - COMPRESSED AIR LINE

1 Design, supply, installation, testing and commissioning of vertical type Air Reciever of 500 liters capacity suitable for a working pressure of 10bar, as per IS2825 ASME section VIII Div complete with pressure guage, safety valve, manual drain, flanged inlet and outlet shall be 80 Nb, inspection cover as required, including mounting frame, foundation bolts etc., complete in all respects. 1.00 Set 75000.00 Rupees Seventy Five Thousand Only 75000.00

2 Supply, installation on a suitable angle iron frame work testing & commissioning of compressed Air Moisture separator with flanged ends suitable for 40mm dia.. 1.00 Set 32400.00 Rupees Thirty Two Thousand Four Hundred Only 32400.00

3 Supply installation & commissioning of pre filter of 8 kg/cm² 1.00 Set 35000.00 Rupees Thirty Five Thousand Only 35000.00

4 Supply installation & commissioning of fine filter of 8 kg/cm² 1.00 Set 35000.00 Rupees Thirty Five Thousand Only 35000.00

5 Supply and installation of interconnected piping between compressor discharge valve, air dryer, receiver and filters, complete as per the drawing and technical specification. ground/fixing on duct wall/ wall using suitable angle iron supports, clamps etc., testing & commissioning of the following size "Class C " ERW grade GI heavy duty pipes and fittings confirming to IS:1239&1879 with necessary cutting, welding/threading wherever necessary including GI fittings like Flanges, bends, collars, reducers, tees etc., with necessary fixing hardware and painting complete in all respects as per technical specifications and as directed by Engineer in charge

a) 40 mm dia NB pipe 265.00 Rmts 1850.00 Rupees One Thousand Eight Hundred Fifty Only 490250.00

b) 15 mm dia NB pipe 20.00 Rmts 980.00 Rupees Nine Hundred Eighty Only 19600.00

6 Supply, welding/threading, testing & commissioning Butterfly Valve of 40mm dia. 16.00 Nos 8500.00 Rupees Eight Thousand Five Hundred Only 136000.00

7 Supply, welding/threading, testing & commissioning of 15mm dia 3 piece SS ball (socket type) valves regular bore, lever operated, body and end connectors of carbon steel including operating handle for the compressed air outlet. 12.00 Nos 1900.00 Rupees One Thousand Nine Hundred Only 22800.00

8 Supply, welding/threading, testing and commissioning of 15mm dia quick release single coupling for the compressed air outlets consisting of both socket and plug for hose pipe of 6mm dia & suitable for working pressure of 7.0bar complete in all respect. 12.00 Nos 1150.00 Rupees One Thousand One Hundred Fifty Only 13800.00

9 Supply, welding/threaded, testing & commissioning of compressed air Automatic liquid drain trap of 15mm dia. 2.00 Nos 28400.00 Rupees Twenty Eight Thousand Four Hundred Only 56800.00

10 Supply, installation, testing and commissioning of Pressure gauge 2" dial with 15NB isolation valve inclluding all accessories complete and as directed by EIC. 2.00 Nos 2548.00 Rupees Two Thousand Five Hundred Forty Eight Only 5096.00

11 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N.Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under: Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. 16.00 Sq.Mtrs 522.94 Rupees Five Hundred Twenty Two and Ninety Four Paise Only 8367.04

Sub-Total of Part III Section - 2 - COMPRESSED AIR LINE (Excluding GST) Rupees Nine Lakh Thirty Thousand One Hundred Thirteen and Four Paise Only 930113.04

Part III - Mechnaical Works

Section-3 - AC works

1 Supply, installation, testing and commissioining of 10 HP Modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling/heating having 100%Hermetically sealed inverter type twin Rotary/Scroll Compressor(s), microprocessor based Controller, top discharge type condensing Unit, with R-410-A Refrigerant or equivalent, vibration Isolators with Suitable foundation etc. complete as required. To have better efficiency Condenser fan shall be capable to operate at different speed with respect to Load. The unit shall deliver the rated capacity and in confirmation as per IS18728:2024 and CPWD Specifications and work even at 50°C ambientTemperature without tripping. The system shall be able to deliver 100% ofThe rated capacity up to 39 Degree Celsius. The unit shall be suitable to workon 400V +/- 10%, 3 Phase, 50Hz AC power supply and BMS compatible. The unit shall be filled with first charge of the refrigerant and ready for use asrequired. The condenser should be coated with a hydrophilic film to prevent water accumulation on the surface of the heat exchanger, enhance water dispersion, and reduce the risk of degradation, thereby improving overallperformance and durability. The Indian Seasonal Energy Efficiency Ratio(ISEER) of the unit shall be as per Energy Conservation and Sustainable Building Code (ECSBC) 2024 as below and complete as per CPWDspecification, connections, inter connections etc. as required.For capacity<40 kwr ISEER 7.4, Capacity > 40 and <70 ISEER 7.5, Capacity > 70 ISEER 7.6 for super ECSBC Building) 1.00 Set 192889.83 Rupees One Lakh Ninety Two Thousand Eight Hundred Eighty Nine and Eighty Three Paise Only 192889.83

2 Supply of minimum 3.6 Ton capacity 4 way Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration Isolation, Corded remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The Indoor units must shut down upon receiving a signal from the BMS System/Fire Signals. The system shall be capable to adjust air flow as per room requirement in auto mode. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. (Make will be same as of Outdoor) NOTE: Indoor units shall be VRV/ VRF compatible 1.00 No 37516.22 Rupees Thirty Seven Thousand Five Hundred Sixteen and Twenty Two Paise Only 37516.22

3 Supply of minimum 2.0 Ton capacity 4 way Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration Isolation, Corded remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The Indoor units must shut down upon receiving a signal from the BMS System/Fire Signals. The system shall be capable to adjust air flow as per room requirement in auto mode. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. (Make will be same as of Outdoor) NOTE: Indoor units shall be VRV/ VRF compatible 2.00 Nos 33672.88 Rupees Thirty Three Thousand Six Hundred Seventy Two and Eighty Eight Paise Only 67345.76

4 Design, Supply, installation, testing and commissioning of suitable size hard/soft refrigerant copper pipe as required with required pipe fittings , accesories, filter drier and couplings by good quality pipe joints which laid between ODU and IDU The Minimum copper pipe gauge shall be as per the gauges indicated by manufacturer. The Pipe sizes to be used as per OEM design recommendation. The Refrigerant pipe shall be insulated with Class O nitirle rubber of 19 mm thick for Gas line and 19 mm thick for liquid line. The piping shall be laid on walls / roof / ceiling well supported at specific intervals with metallic support, Cable tray with cover and required hardwares etc., for fixing copper pipes. All the necessary accessories, jointing / brazing etc shall be carried out as required. The pressure testing of refrigerant piping has to be done as per manufacturer design recommendation. All the copper fittings shall be suitable for R 410 A/R 407R 134a//R-32 refrigerant. . Make: Mandev/Piyush/Totaline (Note: 1. Irrespective of diameter both gas and liquid piping shall be measured as a single item. The single item measurement comprising of gas line, liquid line, insulation and its accessories. Contractor make a note of it and quote accordingly. 2. Before commencement of work, shop drawing to be submitted to OIC/EIC for approval. ) 30.00 Rmts 1250.00 Rupees One Thousand Two Hundred Fifty Only 37500.00

5 Design,supply,Installation testing & commissioning of suitable sizes as per OEM recommonadation not less than 2mm thick CPVC drain water, reducer, bends, collars & elbow etc, all complete and duly insulated with 9 mm thick tubular insulation of closed cell elastomeric nitrile rubber as required.The PVC drain water pipe shall be complete with fittings, accessories and duly insulated using bends, elbows, tees, wall sleeves, hangers, supports, anchors etc.(Note:. Necessary wall openings and closing the same using cement mortar and matching paint finish after taking out pipes is included in the scope of work. ) 30.00 Rmts 250.00 Rupees Two Hundred Fifty Only 7500.00

Sub-Total of Part III Section - 3 - AC Works (Excluding GST) Rupees Three Lakh Forty Two Thousand Seven Hundred Fifty One and Eighty One Paise Only 342751.81

Sub-Total of Part - II + Part - III [Electrical Works] (Excluding GST) Rupees One Crore Fifty Four Lakh Twenty Two Thousand Three Hundred Two and Thirty Six Paise Only 15422302.36

Sub-Total of Part - I + II + III [Civil + Electrical Works] (Excluding GST) Rupees Fifty One Crore Forty Five Lakh Ninety Five Thousand Four Hundred Fifty Seven and Sixty Two Paise Only 514595457.63

The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount

Tenderer's Quote (Excluding GST) 514595457.63 BELOW % 514595457.63

Add 18% GST Rupees Nine Crore Twenty Six Lakh Twenty Seven Thousand One Hundred Eighty Two and Thirty Seven Paise Only 92627182.37

Grand Total (Including GST) Rupees Sixty Crore Seventy Two Lakh Twenty Two Thousand Six Hundred Forty Only 607222640.00

Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.

WARNING: PLEASE ENTER PERCENTAGE QUOTE

HINDUSTAN AERONAUTICS LIMITED

Facilities Management Division

Pre-Qulification Profile (To Be uploaded along with Part A)

Tender Ref No. or Contract No.: HAL/FMD/C-123/25-26

Name of Work: Establishment of Infrastructure for IMRH Facility comprising of Construction of GTV, TRWT, Mobile Sheds along with Associated Buildings comprising of Civil, Electrical and Mechanical Works for IMRH Project at Doddanekkundi Area [Package – II] at RWRDC Division, HAL [DC].

Estimated Amount in Lakhs.: 6072.2

Tender Notice Date:(DD/MM/YYYY) 06.03.2026 Can we give in DD/MM/YYYY

Completion Period(In months) 16

PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3 Kindly mention at Col I J &K as " Any Other related Information"

Sl.No Description Details Enclosed / Not Enclosed Any Other Related Information Remarks

1 Name of the Individual / Firm / Company: * Mandatory Pls enter name

2 Type of ownership Related Document to be Uploaded to eProcurement Portal

3 Year of Estblishment of Company/Business

4 If Other, please specify

5 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc., If not enclosed reasons be to recorded here

6 Address for correspondence:

8 PAN no and Name of Holder

9 PF number (If any)

11 (a) Service Tax Registration No

11 (b) Goods and Service Tax ID No.

12 Contact details

Contact person name Pls

Ph. No. with STD code

FAX No. with STD code 5 6

13 Registered Contractor

If Registered Contractor with HAL Yes/ No Pls Enter Related Document to be Uploaded to eProcurement Portal * Category: A = Above 25 Crores B = 15Crore to 25 Crores C = 5Crore to 15 Crores D = 1 Crore to 5 Crores E = Lessthan 100 Lakhs to 75 Lakhs F = 75 Lakhs to 50 Lakhs 0 7 .A1 1

Name of Organisation 199999 7 A 2

Category and Registration No. 200000 6 B 3

PEMD Amount ( If paid ) 499999 6 C 4

not required Need to Fill Column 19 no comparision 500000 5 D 5

14 I.T Returns for past 03 years 999999 5 E 6

2025-26 Pls Select 'Yes','No' for IT Returns for all the 3 years 2499999 4

15 Maximum value of works excuted during the followinf 5 years. . (In Lakhs)

2020 - 2021 Pls enter Finiancial Turnover in Rupees for all the years NOTE: The value of max work to be supported with the details of Works executed for each year including name of the organisation with period of execution. Here last 3 years cells to be considered to Check Annual Turn Over for 30 % value of Estimation given above 1 6.00 7.00 0 0

Avg Annual Turnover criteria is not met

16 DETAIL OF WORK ON HAND UPTO N-Months (N-contract period) [For Bid capacity calculation] NOTE : PROVISION for 10 works are given. If more, a separate similar sheet to be made showing all the works with all details as per this FORMAT and same to Uploaded. However, 9 works details to be provided and balance work value of other works to be added and to be provided in 10th row as OTHER works.

Sl.No(work No) Name of Organization with address Name of the work on hand Amount of Contract Rs (in Lakhs) Period of CONTRACT in months Date of Commencement of work as Work Order in dd/mm/yyyy Probable date of Completion as Agreed Actual progress achieved till date of Tender Notification Rs (in Lakhs) Balance value of work on hand [Col.(3)-Col.(7)] Rs (in Lakhs) Remarks If Any 0.00

8 0.00 Max Turn Over 07-08 8500000

9 0.00 Current Level to be brought by adding 10% for every year 10-11 8500000 X 1.1 X 1.1 X 1.1

10 0.00 Turn Over to considered A 11313500

0.00 Balance Work On Hand 207452000

Bid Capacity 0.00 Bid Capacity Criteria is not Met this shouldf be hidden while uploading

17 Work Schedule for completion of works with in stipulated time [Please enclose action plan / bar chart as to indicate the completion of work, within the scheduled time (contract period)] Bid Capacity (2 X A X N) - B

Related Document to be Uploaded -162198000

18 Quantity of work Excuted during the last three years

Earthwork [in Cum]

Concrete work [in Cum]

Reinforcement steel [in MT]

Any other quantity of items tenderer would like to mention

19 Bank(s) details: [Copy of the cheque leaf to be uploaded]

19a Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Name of the Bank

Type of Account

19b Bank Statement for past three month

19c Latest Over draft Facilties with Bank enter Name of Bank, Date of Issue and Value of Over Draft

20 Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender Notice. SOLVENCY solvency cal

Name of Bank & Branch Pls Related Document to be Uploaded to eProcurement Portal 06.03.2026 1-Jul 0 40000

Date of Issue(dd-mm-yyyy) #VALUE! 200000 40000

Value Rs. In Lakhs 200001 150000

Solvency value is as per NIT

21 Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Work experience certificates / Completion certificates should be uploaded for verification]. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of the estimated cost. [Amount put to the Tender] 40000 500001 250000

Completed similar works during last 7 years You are Not Eligible Pls Select Works Completed during last 7 years 1000000 250000

Work NoI Type of Work [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 1000001 500000

Name of The organisation

Brief Description of Work: 2000000 500000

Completed value of Work in Rs. Lakh: 2000001 1000000

Date of Commencement of Work [DD/MM/YYYY]: 4000000 1000000

Date of Actual Completion of Work[DD/MM/YYYY]: 4000001 2000000

Work No II Type of Work [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 10000000 2000000

Name of The organisation

Brief Description of Work

Completed value of Work in Rs. Lakh:

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]: work done

Work No III Type of Work and Organisation name [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 06.03.2026 2555

Name of The organisation

Brief Description of Work: #VALUE!

Completed value of Work in Rs. Lakh:

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

Work Competion is NOT with in 7 years

Valid Class I Electrical Licence [or] Undertaking for engaging Electrical Contractor possessing valid Class I Electrical Licence Please Enter Electricial Licence No Electricial Licence valid upto Related Document to be Uploaded to eProcurement Portal

22 DEAILS OF TECHNICAL PERSONNEL AVAILABLE( if space provided is insufficant separate sheet to be uploaded with the same format as below)

Sl.No Name of members or technical personllel avalable in the organization Qualification of similar nature number of years of experience

23 DETAILS OF MACHINERY AVAILABLE

Sl.No Name of Mechinery No Make Year of Manufacture

1 Concrete Mixers - Type etc

2 Vibrators - Diesel - Electrical

3 Weiding equipment's

4 a) Rectifiers

5 b) Welding Generators

6 Erection equipment's

10 Water Lifting motor pumps

13 Drilling Equipment's

16 Stone crushers

17 Bitumen hot mixture plant

18 Bitume boiler

20 Batching plants

21 Vibratory rollers

23 Cranes-Details

24 Concrete pumps

26 Rock breakers

27 Transit mixers

29 Weight batches

24 Details of person holding the power of Attorney (If different from contact person)

Name Related Document to be Uploaded to eProcurement Portal

Ph. No. with STD code

FAX No. with STD code

I/We declare and confirm that - 1. All information and attachments submitted in this application are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my application and suspension of any registrations granted. 3. I/We shall not make refund claims of expenditure incurred in processing this application. Pls enter

26 Tender Document Cost and EMD details

Descipttion Enclosed / Not enclosed Valid upto [in case of BG] Related Document to be Uploaded to eProcurement Portal

Tender cost Enclosed

27 Average annual financial turn over during the last 3 years, ending 31st March 2025 [ should not be less than 30% of amount put to tender] and details for last 5 years to be provided to assess the bid capacity. The values provided to be supported by uploading Balance Sheet along with Profit & loss account statement. . (In Lakhs)

2024-25 Pls Select 'Yes','No' for Annual financial turn over for all the 3 years

Average 0.00 FALSE

Balance sheet and Profit & loss statement for last 05 years