8387/E8

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all aspecified and as directed.

Taking down wooden chowkhat or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc.4.00 Sqm each complete all as specified and directed by Engr-in-Charge.

Taking down wooden chowkhat with shutter without taking off shutter from frame area n.exc.1.5 Sqm each complete all as specified and directed by Engr-in-Charge.

Taking down shutters of any description n exc 1 Sqm each all as specified and directed .

Taking down shutters of any description exc 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and directed by Engr-in-Charge.

Refixing the shutter of size n.exc 1.00 Sqm each in the same opening after necessary repairing, easying and adjusting complete all as specified and as directed.

Refixing the shutter of size exc 1.00 Sqm but n.exc 2 Sqm each in the same opening after necessary repairing, easying and adjusting complete all as specified and as directed.

Taking up or down 15mm bore galvanised steel water tubing (any grade) and all connections fixed on walls ceiling floor etc including cleaning for refixing.or removal to store complete all as directed by Engr-In-Charge.

All as per item No 8.00 here -in- before but for 20 mm bore.

All as per item No 8.00 here -in- before but for 25 mm bore.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water complete and removing the debries all as specified and directed.

Material and labour Plain cement concrete type B-0, 1:2:4 mix (using 12.5 mm graded stone aggregate) in bed blocks, coping,hold fasts etc; including necessary formwork all as specified and directed.

Material and labour Precast RCC Jalli 35mm thick with grade of concrete Type B0 (1:2:4, using 12.mm graded crushed stone aggregates) including all mouldings including taking down old unserviceable RCC Jalli complete all as specified and directed.

Supply and fix in repairs 2nd class hard wood plain fillets, square rectangular or traingular in section clean sawn,secured with screws exc 6 Sqcm & n.exc 13 Sqcm all as directed.

Material and labour 2nd class hardwood scantling wrought, as in framed work including dismantling old unserviceable one complete all as specified and directed by the Engr-in-Charge.

Supply & fix Second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by the Engr-in-Charge.

Supply and fix 35mm thick 2nd class hard wood Factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge.

Supply and fix 35mm thick 2nd class hard wood glazed & skeleton door shutters, open rebated and prepared to received glass, gauge etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.24(a) complete all as specified and directed by Engr-in-Charge.

Supply and fix 30mm thick 2nd class hard wood glazed & gauged window shutters, open rebated and prepared to received glass, gauge etc. edges of framing plain chamfered or rounded, mitred and rebated sah bars etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.24(b) complete all as specified and directed by Engr-in-Charge.

Supply and fix 30 mm thick factory made flush shutter, solid core construction with particle board core and plywood face panels commercial type on both side complete all as specified and directed by Engr-in-Charge.

Supply and fix Prelaminated particle board 18/19mm thick as in Cup board shutter interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame works complete all as specified and as directed including taking down old unserviceable particle board.

Supply and fix Solid PVC door frame of size 50X47mm made out of 5mm thick plain coloured PVC sheet reinforced with MS square tube fixed as per manufacturer instruction complete all as specified and directed.

Supply & fix Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail or bottom rail ; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beeding, and joined together with solvent cement, supplying and fixing in the frame at the site as per specification and drawing and all as directed by the Engr-in-Charge.

Supply and fix 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge.

All as per item No.24.00 here-in-before, but 200mm long complete all as directed.

Supply and fix in repair 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge.

Supply and fix 300mm long Aluminium alloy, anodised, sliding bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alloy complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs 300mm long Aluminium alloy, anodised, sliding bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alloy complete all as specified and directed by Engr-in-Charge.

Supply and fix 100mm Butt hinges stainless steel complete all as specified and directed by Engr-in-Charge.

Supply and fix 100mm size butt hinges medium weight cold rolled,mild steel complete all as specified and directed by Engr-in-Charge.

Supply and fix 75mm size butt hinges medium weight cold rolled,mild steel complete all as specified and directed by Engr-in-Charge.

Supply and fix 150mm long extruded aluminium alloy handles, anodized, fabricated type, complete all as specified and directed.

Supply and fix 100mm long extruded aluminium alloy handles, anodized, fabricated type, complete all as specified and directed.

Supply and fix 100mm long Hasp and staples of aluminium anodized, safety type including bolt to hinges plate and fixed with screws complete all as specified and directed.

Supply and fix in repairs, helical door spring, 300mm long, including roller and roller plate complete all as specified and as directed.

Supply and fix in repairs 150mm long extruded aluminium alloy handles, 'D' type fabricated type, anodised fixed all as specified and directed.

Supply and fix 25mm dia CP fancy type bracket for curtain rod as per sample and as approved by GE .

Supply and fix 20mm dia Chromium plated curtain rod of approved quality complete including taking down old unserviceable one all as specified and directed by Engr-in-Charge.

Materials and Labour Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 all as specified and directed by Engr-in-Charge.

Supply and fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples complete all as directed.

Supply and fix in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples complete all as directed.

Supply and fix Mild steel work as in band, strap, hold fast, cleat, hook, hinges, base tie for door frame, support or stay for rain water pipe etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

Supply and fix in repairs Powder coated aluminium anodised three track sliding fly proofing window frame with shutters ( two panels of glazed shutter and one panel of wire mesh shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements etc. complete and glazing with 5 mm thick tinted glass to aluminium frame work using rubber gasket and stainless steel wi\re cloth of 0.36mm nominal dia of wire. The section of frame and shutter is as under complete all as specified and as directed:- (A) Sections for frame (i) Top and verticals 92x 29.50 x 1.30 mm thick (ii) Bottom 92 x 29.50 x 1.20 mm thick. (B) Sections for shutter (i) 'A' section 39 x 20 x 1.50 mm thick (ii) 'Interlock' section 39 x 20 x 1.50 mm thick (iii) 'H' section 41 x 20 x 1.10 mm thick . Note:- Cost of wire cloth and glazing shall deemed to be included in the rate quoted..

Supply and Fix in repairs Powder coated anodized aluminium window grills of aluminium section n.exc 0.55 Kg/m including necessary jointing fitting etc complete all as specified and as directed.

Supply and fix Steel window (any nos of shutters) including frame with side hung shutters one side shutter/shutters to receive glass and other side shutter/shutters to receive gauge including projecting type hinges with steel handle, and steel peg stay complete without glazing bars complete all as specified and directed by Engr-in-Charge including taking down old unserviceable one.

Supply and fix Steel window (any nos of shutters) including frame with side hung shutters one side shutter/shutters to receive glass and other side shutter/shutters to receive gauge including projecting type hinges with steel handle, and steel peg stay complete with glazing bars complete all as specified and directed by Engr-in-Charge including taking down old unserviceable one. Notes for item Nos 46 & 47:- Both shutter will be measure for payment.

Supply and fix in repairs Steel Ventilators with frame, top hung shutter including hinges, steel peg stay complete all as specified and directed by Engr-in-Charge including taking down old unserviceable one.

Materials and Labour Welding n.exc 2.5 Cm in length to steel windows, doors or any steel members n.exc 6 mm thick complete all as directed by Engineer-in-charge.

Material and labour Non skid coloured tiles 300mmx300mmx7 to 8mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and laid over and including 15 mm thick screed bed in CM 1:4 including dismantling old unserviceable non skid tiles with screed bed complete all as specified and directed.

Material and labour Glazed ceramic colour tiles of size 200 x 300 x 7mm thick on vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles laid over and including 10mm thick backing course in CM 1:4 including dismanling old unserviceable wall tiles including backing course complete all as specified and directed.

Materials and labour 16 mm thick Granite (of any type) work (table rubbed and polished) in Steps, Jambs, Cooking Platform, Dado, Skirting, Floor and like over and including 20mm thick screed bed CM (1:4) including pointing in white cement (1:2) using admixture of pigment to match the shade of granite stone including Cutting, rounded smooth edges and Polishing including taking out old unserviceable granite complete all as directed by Engineer-in-Charge.

Materials and labour 15 mm thick cement plaster on brick or concrete wall surfaces in cement mortar 1:6 finished top surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Materials and labour 15 mm thick cement plaster on brick or concrete wall surfaces in cement mortar 1:4 finished top surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Materials and labour Acrylic distemper of any colour / tint, two coats over a coat of primer and white cement based putty on newly platered internal wall surfaces including necessary preparation of surfaces complete all as specified and directed.

Materials and labour Cement based paint of any colour / tint, two coats over a coat of primer on newly plastered external surfacses including necessary preparation of surfaces complete all as specified and directed.

Supply and fix 3mm thick ordinary quality sheet glass and glazing with oil putty in square n.exc. 0.5 Sqm in each pane complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in square n.exc. 0.5 Sqm in each pane including hacking out ol unserviceable sheet glass complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair 3 mm thick pin headed/figured/frosted glass ordinary quality and glazing with oil putty/wooden beading in square n.exc. 0.5 Sqm in each pane complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair 3 mm thick pin headed / figured/ frosted glass ordinary quality and glazing with oil putty / wooden beads in Square n.exc 0.50 Sqm etc including hacking out old broken glass completed all as specified and directed.

Materials and labour Preparation of new steel surfaces of any description, over 10 Cm in width or girth, and painting with two coats of synthetic enamel paint of any colour/ tint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

Materials and labour Preparation of new surface of wood or wood based material over 10 Cm width or girth and applying two coats of synthetic enamel paint of any colour / tint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs PTMT shower rose with shower arm complete all as specified and as directed. Make:- Prayag cat part No.1814-Cor equivalent model from make:- Polytuf.

Supply and fix 550x400 size Vitreous china wash basin white including 32 mm waste coupling of PTMT (half or full threaded, minimum weight 45 gms), waste pipe low density polyethylene pipe 32mm bore and brackets including taking down old wash hand basin alongwith fittings all as specified. Make :Cera Cat No. S2040103 or equivalent of approved make in as specified in Particular Specification here in after.

Supply and fix in replacement vitreous China wash down water closet pan (pedestal pattern), white, with ‘P’ or ‘S’ trap, front or back inlet, including fixing bolts, PVC seat cover and mild steel chromium plated hinging device and all necessary connections. Make : Parryware Cat No. C0287 or equivalent model as specified in list of approved makes given here in after in Particuler Specification.

Disconnecting existing water tank of capacity exc 250 litres & n.exc 500 litres, reconnecting and refixing in position including cleaning and removing all scale and dirt and algae formation, etc from tank and from mouth of circulating pipes by using TERBAC G5 , etc including writing letters/figures boldly & solidly “TANK CLEANED ON ________ (Date of Cleaning )” with two coats of synthetic enamel paint (1st grade quality) of height of letter 5 Cm & width 2.5 Cm with oblitering the old one complete all as specified and as directed by the Engr-in-Charge. Note:- Works shall be carried out through authorized dealer of TERBAC G5 i.e. Rey Cleantech and a certificate shall be produced after sucessfull cleaning of tank.

All as per item 66.00 here-in-before but capacity of tank exc 500 litres and n'exc 1000 litres

All as per item 66.00 here-in-before but capacity of tank exc 1000 litres and n'exc 2000 litres.

Supply and fixing in repair Stainless steel (conforming to AISI-304 grade) kitchen sink of overall size 405mm x 460mm and bowl size 405mm x 354mmx 203mm depth, made of 1mm thick stainless steel sheet with CP waste coupling including ball and chain 300mm long with brass cap rubber plug, 32mm bore PVC waste pipe(heavy duty) 90 Cm long, and bedded in cement mortar and fixed on CP cantilever brackets, complete as directed. Make : Nirali/ Neelkant/ Prayag.

Supply and fix in repair stainless steel (conforming to AISI-304 grade) kitchen sink with drainage board of overall size 915mm x 460mm and bowl size 410mm x 355mmx 165mm depth, made of 1mm thick stainless steel sheet with CP waste coupling including ball and chain 300mm long with brass cap rubber plug, 32mm bore PVC waste pipe(heavy duty) 90 Cm long, and bedded in cement mortar and fixed on CP cantilever brackets, complete as directed. Make : Nirali/ Neelkant/ Prayag.

Supply and fixing in repair stainless steel kitchen plate rack, made out of 1.00 mm thick sheet for size 31' x 24' x 10' mm fixed on wall with screw,washers complete all as directed. Make:Nirali / Bluestar / Prayag.

Supply and fix as in repair Towel Rail PTMT, 600mm longfixed with chromium plated brass screws and wooden / plastic cleats with fittings all as directed by Engineer - in - Charge . Make-Prayag Cat No-BA-200 or equivalent model from make:- Polytuf.

Supply & fix in repair 32mm dia PTMT flexible waste pipe ( half or full threaded) for WHB complete all as specified and as directed by the Engr-in-Charge.

Supply and Fix as in repair PTMT Grating of 100mm size Without Waste Hole complete all as directed by Engineer - in - Charge . Make:- Prayag cat part No. 111 or equivalent model from make:- Polytuf.

Supply and Fix as in repair CP Waste coupling 32mm half or full threaded complete all as directed by Engineer - in - Charge .

Supply and Fix as in repair PTMT Waste coupling 32mm half or full threaded complete all as directed by Engineer - in - Charge .

Supply and fix in repair PVC Cabinet Mirror of size 450 x 350 mm fixed to wooden plugs with chromium plated brass screws and cup washers. including taking down old one complete all as specified and directed by Engr-in-Charge. Make:- Prayag cat part No.551 or equivalent in Parryware/ Cera.

Repairs only flushing cistern including cleaning and replacing of washers, syphone inlet accessories with complete fittings and fixtures complete all as directed by Engineer-in-charge.

Supply and fix as in repair PTMT connection, 15 mm dia 600 mm long all as directed by Engineer - in - Charge . Make-Prayag / polytuf/ Shakti

Supply and fix in repair PTMT 40mm dia PVC flexible pipe for kitchen sink all as directed by Engineer-in-Charge. Make-Prayag Cat No-327 or equivalent

Supply and fix in repair 32mm dia flush pipe low or high density complete all as directed by Engineer-in-Charge. Make-Prayag Cat No-327 or equivalent

Supply and fix in repair PVC Tank cover including hinges in any size complete all as specified and as directed by the Engr-in-Charge.

Supply and fix in repairs 10 Litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, fixed in repairs complete all as specified and directed. Make :SLEEK of Hindware or equivalent of Hindware/ Cera/ Parryware

Supply and fix tubes 15mm bore medium grade galvanized with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engr-in-Charge.

All as per item No.85.00 here-in-before but 20mm bore.

All as per item No.85.00 here-in-before but 25mm bore.

Refixing old steel tubing 15mm bore and connection in new or old position with new fittings (wall, ceiling, floor etc.) complete all as specified and directed by Engr-in-Charge.

All as per item No.88.00 here-in-before but 20mm bore.

All as per item No.88.00 here-in-before but 25mm bore.

Supply, fixing & hoisting in position Rotational moulded polyethylene water storage tank, 1000 litres capacity, ISI marked multi layer construction (cylindrical vertical with closed top), hoisted & fixed in position including dismantling of old unserviceable tank complete all as specified and as directed . Make of Water Tank : SINTEX/POLYCON

Supply, fixing & hoisting in position Rotational moulded polyethylene water storage tank, 500 litres capacity, ISI marked multi layer construction (cylindrical vertical with closed top), hoisted & fixed in position including dismantling of old unserviceable tank complete all as specified and as directed . Make of Water Tank : SINTEX/POLYCON

Supply, fixing & hoisting in position Rotational moulded polyethylene water storage tank, 2000 litres capacity, ISI marked multi layer construction (cylindrical vertical with closed top), hoisted & fixed in position including dismantling of old unserviceable tank complete all as specified and as directed . Make of Water Tank : SINTEX/POLYCON

Supply and fix in repair 15mm bore angle Stop valves of PTMT any colour high pressure screwed for iron pipe or to CPVC pipe complete all as specified and directed. Make : Prayag Cat No 144-E or equivalent approved product of POLYTUF.

Supply and Fix 25 mm dia and 150mm long GI long screw fixed to water tank (fixed Independently) etc. including taking down old unserviceable one complete all as dirceted.

Supply and Fix 20 mm dia and 150mm long GI long screw fixed to water tank (fixed Independently) etc. including taking down old unserviceable one complete all as dirceted.

Supply and Fix in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod &high density plastic ball screwed for iron pipe of 25mm bore dia ( Minimum weight 455 gms) complete all as specified and as directed. Make : Prayag Cat No 153 or equivalent approved product of POLYTUF.

Supply and Fix Ball valves high pressure of PTMT with epoxy coated Aluminium rod &high density plastic ball screwed for iron pipe of 25mm bore dia ( Minimum weight 455 gms) complete all as specified and as directed. Make : Prayag Cat No 153 or equivalent approved product of POLYTUF.

Supply and fix in repair shelf 300mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats(minimum weight 300 gm) complete all as specified and directed by Engr-in-Charge. Make-Prayag cat part no.190 or equivalent model of make:- Polytuf/ Shakti.

Supply & Fix in repair Bib tap standard of PTMT of any colour with nozzle, screwed for iron of having minimum weight 90 gms complete all as specified and as directed. Make : PRAYAG Cat No-127-E or equivalent approved product of POLYTUF.

Supply & Fix in repair Pillar tap standard of PTMT of any colour, screwed for 15mm bore GI pipe of having minimum weight 90 gms complete all as specified and as directed. Make : PRAYAG Cat No-130-E or equivalent approved product of POLYTUF.

Supply and fix in repairs Vitreous China squatting pan of ‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern complete including provision of PCC bedding and connection to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor all as specified and directed by the Engr-in-Charge. Make : Parryware Cat No C0123 or equivalent model of make :- Hindware / Cera.

RADHA ENTERPRISE

BHARUKA ENTERPRISES

ROY CONSTRUCTION

TAPAS ENGINEERING CO

JHAWAR SUPPLIERS

KWALITY CONSTRUCTION

UNIVERSAL TRADING CENTRE