Providing stage arrangements to VSV Municipal Park in Thirupathur Municipality

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38

Plain Cement Concrete 1:2:4(one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Provision for writing Drawings like animals,cartoons,greenarys ,etc.., Including cost of paint writing Labour charges Etc..,with necessary scafolding and barigade arrangements Complete instruction given by Departmental officers.

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Supplying and fixing of Two seater SeeSaw for below 12 years old childrens to a height of 0.50m with 50mm dia leaver and 40mm top bar with M.S. Pipes. The seater is of moulded plastic with heavy duty bush bearing. The cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supplying and fixing of Slide for below 12 years old childrens to a length of 3.00m with 80mm dia leaver and 40mm top bar with M.S. Pipes. The seater is of moulded plastic. The ladder frame is made up of 25mm M.S.Pipe, hanrail 20mm dia M.S. Pipe and the centre support is 80mm dia M.S. Pipe The cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supplying and fixing of Jungle Gym for below 12 years old childrens to a height of 2.10m with 80mm dia leaver and 40mm top bar with Stainless steel Pipes. The ladder frame is made up of 25mm Stainless steel Pipe, hanrail 20mm dia Stainless steel Pipe and the centre support is 80mm dia Stainless steel Pipe The cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supply ,Erection, and fixing of Seated leg press of Pipe using 4" GI pipe, 11/2" GI pipe,11/4" pipe 'B' Class and 5204 Premium Bearing, poly Urethane coating painting with coating thickness of primer 30 micrones and PU Top coating 55 microns. Fibre seats of raw materials Fiber Mat: EB 300, 450, 600 & Fibre Resin: GP Resin, ISO Gel coat, Top Coat, Pigment etc,including cost and conveyance of all materials and labour charges etc.

Supply ,Erection, and fixing of Airwalker of Pipe using 2" GI pipe,21/2" GI pipe 11/2" GI pipe,11/4" pipe13/4" 'B' Class and 5204 Premium Bearing & 6202 NTN Bearing , poly Urethane coating painting with coating thickness of primer 30 micrones and PU Top coating 55 microns including cost and conveyance of all materials and labour charges etc.

Supply ,Erection, and fixing of Shoulder Wheel of Pipe using 21/2" GI pipe,3/4"(20mm) 'B' Class and 6204 ZZ Bearing 1" * 3/8" GI Bolt, 3* 3/8 GI Bolt, poly Urethane coating painting with coating thickness of primer 30 micrones and PU Top coating 55 microns including cost and conveyance of all materials and labour charges etc.

Supply ,Erection, and fixing of Hip Twister of Pipe using 2" GI pipe,21/2" GI pipe,11/4" pipe 'B' Class and 6206 NTN Bearing, poly Urethane coating painting with coating thickness of primer 30 micrones and PU Top coating 55 microns including cost and conveyance of all materials and labour charges etc.

Supply of 36w LED Street light Fitting with LED Etc., completed., ( PWD SOR Page No.122) Sl No.17a

Supply of 100w LED Street light Fitting with LED Etc., completed., ( PWD SOR Page No.122) Sl No.17a

Wiringwith2x1.5sq.mm.PVCinsulatedSCunsheathedFRLScopperconductorcableof1100VgradeinsuitableheavygaugeMSconduitpipeonwallandceilingwithMSaccessorieswithswitchboxwith5AFTswitchinflushwithwallandcoveredwithhylumsheetof3mmthickwithpaintingofsuitablecolourwithcontinuousearthwireconnectionof 1.5 sq.mm copper wire for light point / fan point

Supplyandfixingof1200mm(48")sweepACceilingfancompletewithsteppedelectronic300Wregulatorwith1metre down rod with fan clamp with side plates and cross arm of size 450mm (18")

Suply and delivery of 18W LED Fitting

Supplyandfixingof3Nos.5A(3pinand2pin)combinedflushtypewallsocketwithcontrolswitchesconcealedinsuitable TW box covered with hylem sheet in flush with wall with earth connection

Supply and Erection of 3 x 1.50 sqmm UG Copper Cable including cost and Conveyance of all Materials to site and labour Charges Etc.,, completed

Supply and laying of 63MM Casing HDPE Pipe

Supply and instlation of 2 Pole MCB

Labour charges for sapathi work for entrance gate with necessart bricks, 1:3 Plastering, quick cement, cement,scffoulding work, art works with necessary labours and materials etc.., complete as per standard specifications

Labour charges for "8" Walk with necessart bricks, 1:3 Plastering with necessary labours and materials etc.., complete as per standard specifications

Labour Charges for repair of existing MS Chairs Complete as per standard specifications

Please Enable Macros to View BoQ information