MID/J/92 (UT Capex)

Realigning and Installing Of 02 Nos. MS Suction Pipe Of Unit II And Unit III along with allied works at LIS Bohr Camp

The job involves dismantling of old worn out suction pipe of unit II and unit III along with foot valves by way of cutting the old rusted nuts and bolts and breaking the wall of the pump room around the pipe for easy extraction of pipe. Extracting out the suction pipes in pieces along with foot valve with the help of manual labour from the local nallah at LIS Bhour Camp. Then providing, fitting, welding and laying of MS suction pipeline of 200 mm diameter of 06 mm thickness- 14 meter approx length of unit II & III each at LIS Bhour Camp after dismantling of old suction pipelines, by way of cutting the rusted nuts and bolts with gas cutting and shifting it to road side. Providing, fitting of approx 14 number MS flanges with 200 mm internal diameter with suction pipe at different lengths for each unit II & unit III. Welding the flanges to pipes with double layered welding to avoid any leakages. Fastening of suction pipeline with pumping units II & III using nuts, bolts and rubber gasket. Fabrication of 200 mm diameter MS bend 03 nos. for each unit II & unit III, properly flanged at both ends as per site conditions and alignment of pumps. Fastening of each length of suction pipes with hexagonal nuts and hexagonal bolts. The job includes excavation of earth outside the lift irrigation station approx 22 foot x 2.5 feet width x 3 feet depth for lying of pipeline after proper dressing, ramming and levelling and refilling of earth after laying of pipeline. Disposal of excess earth to safer distance not less than100 mtrs from LIS .The job also includes properly ramming of filled earth and then making top surface rigid with 1:2:4 PCC up to road width. Providing and fitting of new 200 mm diameter foot valve on the suction end of the pumping unit II. Job includes providing and fitting of new nuts, bolts and rubber gaskets for all flanged joints on suction side . The job also involves cutting, welding of pipe line, welding of flanges at various places to accommodate slight change in direction/adjustment. Making of suitable holes in walls of the pump room on suction side as per the site conditions for passing of the pipe line and job also involves providing of suitable supporting blocks with the help of PCC work to suction pipe line as per the requirement. Complete job includes cost of material, welding charges, skilled/ semi skilled labour, transportation charges, carriage charges of material on head load from road side to lift station. Testing of pumping machinery and suction delivery line for proper functioning and also plugging the leaking joint with welding if any. Complete job includes cost of material, consumable, handling, loading, unloading, transportation charge, labour charges for both skilled /semi-skilled labour and hiring charges for Crane , tripod stand, tools and tackles required during the execution of the job at site. The firm should quote rebate on damaged suction pipes

Rebate on Old Parts

VK Mechanical Works (BID ID -2609901)