Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹60.7 L
EMD Value
₹61,000
Closing Date
9 May 2025, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Public Works Department
K HANUMANTHA RAO
Asphalting to road
PWD/2025-26/RD/WORK_INDENT21394
PWD/2025-26/RD/WORK_INDENT21394
Reserved
Roads
Two Tender Document System(Two Cover)
PWD Division Office Madhugiri
7 documents required · 7 mandatory
3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2020-21 to 2024-25 (b) satisfactorily completed (at least 25% of the contract value), as prime contractor, at least any construction work of value not less than Rs. 15.16 Lakhs(should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent)
3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21 to 2024-25 ) (c) executed in any one year (for a continuous period of 12 months), the following minimum quantities of work:1.Earth Work Excavation / Embankment / Sub grade & earthen Shoulders: 597.00 Cum (2) WMM/WBM.280.00 Cum (3)GSB:219.00Cum (4) BM/SDBC :169.00Cum should be countersigned by the employer in charge, not below the rank of an executive engineer
3.5 Tenderers who meet the specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under AxNx5-B, Where A-Maximum value of civil engineering works executed in any one year during the last five years (updated to 2025-26 price level) taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which the tenders are invited. B-Value at 2025-26 price level, of existing commitments and on-going works to be completed during the next 05 months (period of completion of the works for which Tenders are invited)) The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent
3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e.,2020-21 to 2024-25 (a) achieved in at least one financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.60.65 Lakhs Note: The returns submitted to the I.T. along with the Profit and Loss account statement, balance sheet should be uploaded for the financial turnover criteria attested by registered Chartered Accountant
Liquid assets and /or availability of credit facilities of no less than Rs18.19 Lakhs Credit lines/ letter of credit/ certificates from Nationalized / Scheduled banks.Note:-LOC / K-form for the stipulated amount should be submitted in the prescribed format
₹1,520
₹61,000
24 Apr 2025
24 Apr 2025
12 May 2025
5 May 2025
Improvements & Asphalting To Road From ID halli to Ap border via Janakaloti, hosaitaloti,oblapura, Chikkadalvatta, Vitlapura Ch 9.70 to 10.85 km in selected reaches in madhugiri taluk
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...
Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead. Ref to MoRT&H : IRC - 3...
Compacting Original Ground - Compacting original ground supporting embankment - Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of emba...
Patching of Potholes - Patching of Shallow Potholes using SDBC Gr II 25 mm thick - Patching of shallow potholes on asphalt surfaces by using Semi Dense Bituminous Concrete 25mm thickness. The ...
Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...
Surface Drains in Soil - Construction of unlined surface drains of average cross- sectional area 0.40 m2 in soil to specified lines, grades, levels and dimensions. Excavated mate...
Granular Sub-Base - Plant Mix Method - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material...
Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...
Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...
Tack coat on Granular surface treated with primer - Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface. R...
Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading prem...
Semi Dense Bituminous Concrete - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading pre...
Direction and Place Identification Signs upto 0.9 m2 Size Board. - Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67:2022 made of high intensity...
Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI ret...
Tack coat on Bituminous surface - Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface clean...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
21394 kw-3 RESERVED.doc
Tender Document • 1.11 MB
LOI dtd.pdf
Instructions to Tenderers • 2.03 MB
Randomization.pdf
Instructions to Tenderers • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .