REPAIR RESURFACING OF ROAD REPAIRS TO HARD STANDING APPROACH PATH ROAD SIGN BOARDS REPAINTING OF ROAD AND OTHER ROAD FURNITURE ITEM WORKS IN THE UNITS OF JHAKRI AVERIPATTI AND MATIANA IN THE AREA OF AGE B AND R PRITHI MIL STATION

Amount

Demolition of PCC in ground floor and pavings not exc 15 cm thickness below or above ground level including removal of rubbish out side MOD land complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8) type D2, (40 mm graded stone agg) as in sub base of floor/ hardstanding/ footpath complete all as specified and directed.

M&L for 60mm thick coloured rubber moulded glossy finish machine pressed precast concrete interlocking paver block, M-35 Grade with pre-polished, coloured/ laquar finish any shape and size, as approved confirming to IS 15658-2006 with and including over 25 mm thick stone dust/ sand cushining complete all as specified and directed.

M&L for cement concrete tiles, machine pressed, set and jointed and pointed in neat cement slurry with grey cement and pigment in floors over and including 20 mm thick screed bed in cement mortar (1:4) for following size of tile complete all as specified and as directed:-

20cm x 20cm x 25 mm thick

M&L for repair to pot holes any depth not exceedng 1 sqm each including sweeping free from dust and mud or water scouring sunken surface in roads, path etc cutting around edges to at least 30 mm in depth and making good by applying tack coat @ 5 kgs per 10 Sqm with Paving Bitumen VG-10 grade and including laying premixed bituminious macadam with Paving Bitumen VG-30 grade @ 4% by weight of total mix, well rammed and sealed with paving Bitumen VG-30 grade @ 9.8 kgs per 10 Sqm blinded with 0.09 Cum of stone chipping of size 6.3mm and again well rammed and rolled using 8 to 10 tonne capacity power roller (including supply of pre-mixed macadam, binder and chipping), depth of pot holes exceeding 30 mm complete all as specified and directed.

M&L preparing black top surface by brushing with brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc on black top/concrete surfaces than applying evenly priming tack coat with paving Bitumen VG-10 grade over the prepared surface by mechanical sprayer @ 5 kgs/10 Sqm of surface area complete all as specified and directed.

M&L for applying bituminous premixed semi dense asphaltic concrete 40 mm thick (consolidated thickness) with 5.50% binder of paving Bitumen VG-30 grade, content by weight of total mix including cement filler, on surfaces, rolled compacted with using 8 to 10 tonne capacity power roller to achieve the required compactness, camber and gradient mixed in hot mix plant using design mix and laid by mechnaical paver finisher complete all as specified and directed. NOTE:-(i) The actual binder content used shall be as per optimised content based on approved job mix formula irrespective of what ever indicated in Sch 'A'. (ii) Price adjustment shall be done on MINUS side only @ Rs. 55,000/- per MT (without considering the permissible tolerance on minus side) with reference to binder content indicated in Sch 'A'. (iii) No Price adjustment for Bitumen shall be done for variation on plus side. (iv) Please note that SDAC to be laid immediately after laying of BM. In case the SDAC could not be laid within 48 hours of laying of BM, primer coat @ 3Kg / 10Sqm to applied over freshly prepared bituminous surface and nothing extra shall be paid by the Govt. on this account. No claim what so ever shall be entertained by Govt on this account.

S&F cat eye solar reflective type of metal body alloy of size 100x100x20mm with PAMA striplens reflector fixed with and incl MS stud of suitable size as per manufacturer instruction complete all as spd and directed by Engr in Charge.

S&F metal tubular delinator made out of ABS round body fitted with 2 Nos. 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50mm dia steel pipe of 600mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embeding in PCC 1:2:4 (150x150x300mm ) type B1 using 20 mm graded agg complete all as specified and directed.

M&L for preparation of existing bituminous surfaces, removing, dust, dirt grease and other foregion matters etc to receive the markign and M&L for thermo plastic (Reflective) line, dashes, arrows, letters etc of following size wide marking, having 2.5 mm thickness (average) of uniform surface finish conforming to BS 3262 (Part 1) 1989 read in conjunction with the MOST specification 803 clause 4.2.2 on bituminous surfaces in white/yelow clour and super imposed with glass beads confirming to BS 6088 read in conjuction with and MOST specification 803 clause 4.3.3 complete all as specified and directed:- Note: - MOST specification 803 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by the GE. Shape & size/ patterns of marking shall be as approved by the GE.

width n exc 10cm wide.

S&F in repair convex mirror of 1000 mm dia and made up of polycarbonate material provided with and including 40 mm dia MS pipe post of 2400 mm height duly powder coated with adjustable fixing brackets for MS Pipe used for road turning, intersections, curves T Junctions Hospital, Parking lots etc and also ideal for surveillance with clear & definite mirror image having 130 degree of viewing angle with unbreakable & strong mirror as approved including PCC (1:2:4) type B1 of size 45x45x45 cm and necessary Earth work complete all as specified and directed.

S&F in repair solar cat eye (Studs) of size 125x125x25mm (Shank 60mm) with aluminium alloy shall high efficiency mono-Crystalline solar panel 24.V/0.30 watt having one Ni-Mh or Ni-Cd rechargeble battery (1.2v/1600MA). Six super bright LEDs with 10,000 to 18,000 mcd (Mil Candela) having flash rate 2 Hz and bearable weight 10 tons approx with view distance upto 1,000 meters of any colour i.e yellow, red, blue, green or white as required at site working temp 10-50 degree celcius, working time 3 to 4 days after fully charged battery, charging time 5 to 6 hrs from direct sun light maintenance free, unbreakable, poly caarbonate clear facing, automatically turn on at night and turn off at day including all fixing arrangements as per manufacturer's instuctions complete all as specified and directed.

PRITPAL SINGH (BID ID -3279444)

H S ENTERPRISE (BID ID -3273573)