Modernization of Transport Commissioner Office Jammu Electrical Part.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group A

Wiring for light/ power plug with 2X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

4 x 10 sq. mm + 2 x 6 sq. mm earth wire

4 x 16 sq. mm + 2 x 6 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC conduit as required.

1 x 1.5 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

3 pin 5/6 A socket outlet

15/16 A switch

6 pin 15/16 A socket outlet

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C"curve including connections, painting etc. as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.

1 or 2 Module (75mm x 75mm)

3 Module (100mm x 75mm)

4 Module (125mm x 75mm)

6 Module (200mm x 75mm)

8 Module (125mm x125mm)

12 Module ( 200mm x 150mm)

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB /Isolator)

8 way (4 + 24), Double door

Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole 6/10/16/32 Amp

Single pole and neutral 40 Amp

Single pole and neutral 63 Amp

Triple pole and neutral 40 Amp

Triple pole and neutral 63 Amp

Supplying, installation, Testing & Commissioning of 18- 22 watt LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast / Extruded aluminium Body (Thickness ≥ 1.20 mm)

Supplying, installation, Testing & Commissioning of 36 watt Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6000°K / 6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast / Extruded aluminium Body (Thickness ≥ 1.20 mm)

Supplying and fixing of following electrical items suitable for operating on 240/230Volts AC, 50 Hz supply. including connections etc. as required.

400 mm sweep wall mounting fan (oscillating type) on wall with necessary connection as required.

Supply, installation, testing & commissioning of GI Electrode Earthing with 50mm dia and 3 meter length, with 3mm thick the electrode should be hot-dip galvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact betwen the electrode and compound should be eco-friendly GI Electrode Earthing should be maintinance free and does not require regular manual addition of water . The earthing pit should be covered with PVC cover.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Supplying, Installation, Testing & Commissioning of inverter 2000 VA along-with 2 Nos. long tubular batteries 150 AH and trolly of suitable size.

Supplying, installation, testing and commissioning of 1.5 Ton Inverter type Split AC's (copper) Cold type of minimum capacity following Specification as detailed below. 1. Should be of inverter type 2. Cooling capacity (in Tr): 1.5 3. BEE Star rating: 3 4. Maximum local temperature: 52 C 5. Rated cooling capacity (BTU/hr.): 19000 or above 6. Condensing coil: 100% Copper with grooved copper tubes 7. Electrical input, 220 V ± 30/50Hz/Single Phase 8. Noise level (indoor unit): = close to 35 dB 9. Compressor type: rotary or any other suitable technology 10. Refrigerant type: R-32 11. Anti-Corrosive Coating for the outdoor unit: Bule Fin/Gold Fin or equivalent 12. Compressor Warranty: 10 years 13. PCB Warranty: 5 year 14. Total System Warranty: 1 year 15. Minimum noise level of the indoor unit should be around 28 dB (A)

16. Should have air filtering mechanism for removing dust 17. Supplier has to include brochure of the quoted model Each unit must provide cooling & dehumidification, be operatable via remote control, operate at 220-240 V AC supply with latest in vogue features. The job includes Repairs made to wall whereever as required.

Supplying, Installation, Testing & Commissioning of following capacity automatic voltage stabilzer copper wound wall mounted, single phase with range of 90-240 V along with wall mounting brackets & fitting. The job includes repairing the walls where necessary. Warrantee.:- 2 Years from the date of installation.

Supplying & fixing of M.S Wall/Floor Stand duly powder coated for outdoor unit of Split AC

Supplying & fixing of drain pipe for indoor unit 1"

Extra length of copper pipe for outdoor unit and suitable size copper cable of required size for 1.5 Ton AC

Display Type-4K UHD 98”/ Display Resolution-4K Ultra HD (3,840 x 2,160)/ Backlight Type-Direct/ Refresh Rate-60Hz Native/ Simplink (HDMI CEC)-Yes/ HDMI Audio Return -channel-eARC (HDMI 1)/ USB Input-2ea (v 2.0)/ Ethernet Input-1ea/ RF Input -(Antenna/Cable)-2ea/ Wi-Fi-Yes (Wi-Fi 5)/ AI Upscaling-4K Upscaling/ AI Brightness Control-Yes/ HDR (High Dynamic Range)-HDR10 / HLG/ FILMMAKER MODE ™-Yes/ Dynamic Tone Mapping-Yes/ Picture Mode-9 modes (Vivid, Standard, Eco, Cinema, Sports, Game, Filmmaker, (ISF)Expert(Bright Room), (ISF)Expert(Dark Room))/ HGIG Mode-Yes/ Game Optimizer-Yes (Game Dashboard)/ ALLM (Auto Low Latency Mode)-Yes/ ThinQ-Yes/ Intelligent Voice Recognition-Yes/ Magic Remote Control/Built-In/ Works with Apple Airplay2-Yes/ Smartphone Remote App-Yes/ Full Web Browser-Yes/ Sports Alert-Yes/Room to Room Share-Yes (Receiver)/ Family Settings-Yes/ USB Camera Compatible-Yes/ Ho

me Hub-Yes/Works with Apple Home-Yes/ Audio Output-20W/ AI Sound-AI Sound Pro (Virtual 9.1.2 Up-mix)/ Speaker System-2.0 channel/ AI Acoustic Tuning-Yes/ Speaker Direction-Down Firing/ Sound Sync-Yes/ Sound Mode Share-Yes/ Simultaneous Audio Output-Yes/ Bluetooth Surround Ready-Yes (2 Way Playback)/ Audio Codec-AC4, AC3(Dolby Digital), EAC3, HE-AAC, AAC, MP2, MP3, PCM, WMA, apt-X

SITC of 65'' interactive touch panel, Backlight DLED Panel, Touch technology VA, Display Ration 16:9, Brightness Contrast 350 cd/m², Ratio (Typ) 4000:1, Native Resolution 3840 x 2160, Viewing Angle (H/V) 178 degree /178 degree, Response Time (MS) 8.5ms, Refresh Rate (Hz) 60Hz, Estimated Life Time >30,000 hours (Min), Color Depth 10bit, No. of Colors 1.07 Billion, Pixel Pitch 0.42975×0.42975mm, Display Area 1650.24(H)×928.26(V)mm, Speaker 2 x 10W, Should have internal / Additional OPS, Interactivity:- Infrared - 20 Points touch, Sensitivity Any touch with finger, gloved hand or pointer Connectivity HID, TUIO, Flash Supported OS and Applications Windows10/Windows8/Windows7/Android /Windows XP/Linux/Mac OS X/Chrome, Response Time <10ms, Accuracy ±2mm, Toughened Glass 4m with Level 7 of Mohs Standard, Operating System:- Android 8.0, CPU A73*2, A53*2 , GPU Mali- G51*2, RAM 3 GB, ROM 32GB, Optional PC Module - OPS42A, Connectivity- HDMI IN x 4, USB 2.0 x 8, USB3.0 x 8, LAN RJ45 Date x 1, RJ45 OUT x 1, VGA In x 1, Audio In (3.5mm) x 1, RS232(Service) x 1, Touch OUT x 3, hdmi out x 1, audio out(3.5mm) x 1, spdif x 1, usb type-c x 1, etc complete as required including angle supports.

Supply Installation Testing and Commissioning of Digital Chairman Unit with fixed microphone with flexible stem can be easily adjusted to suit the user- long 480- 500 mm/Short (310mm) as per instruction of Engineer-in-charge ,Built-in loudspeaker with volume control,Built-in volume control for headphones, Possible-to-speak indication,Request-to-speak indication,GSM immunity, The flush mounted discussion device with short micropone is the perfect solution for conference rooms where table space is key. The flexible stem allow the participant to adust the microphone to the most comfortable position.Possible Functions:-Possible-to-speak indication:- A white possible-to-speak indicator above the microphone button indicates when the microphone can be activated.Request-to-speak indication:- A green request-to-speak indicator above the microphone button and in the head of the microphone indicate when a request-to-speak has been added to the waiting list. The indicators flash green when the request-to-speak is first in the waiting list. Short or long microphone with flexible stem:- The fixed microphone with flexible stem can be easily adjusted to suit the user. For maximum comfort, a short 310 mmm (12.2 in) or long 480 mm (18.9 in) microphone stem is available. Built-in loudspeaker with volume control:- To ensure for optimum intelligibility, the loudspeaker volume of all discussion devices is centrally controlled from the control unit. Face-to face meeting feeling:- An authentic face-to face meeting feeling is achieved by allowing the loudspeaker and microphone to be on at the same time.

GSM immunity:- Immunity to mobile phone interference ensure clear, uninterrupted discussion.Controls and Indicators:- 1. Microphone button 2. Color-coded LED indicator above microphone button for showing the following states: microphone on, request-to-speak, and possible-to-speak. 3. Light-ring indicator in head of microphone. 4. Concealed initialization button at base of device for reassigning the network address. Connections 1. 1 x 6-pole circular female connector with cable locking recess - for loop-through connection of Discussion Devices. 2. 1 x 2 m (78.7 in) cable with a 6-pole circular male connector with cable lock. Technical specifications:-Power consumption (W):- 1.50 W/ Frequency response (-3 dB) (Hz):- 30 Hz- 20000 Hz/ Total harmonic distortion + noise (%):-1%/ Minimum signal-to-noise ratio (dBA):- 93 dBA Sample rate (kHz):- 44.10 kHz

Maximum number of flush discussion devices supported per trunk :- 35/ Acoustic Polar Pattern:- Cardioid/ Frequency response (-3 dB) (Hz) (microphone):- 125 Hz - 15000 Hz/ Nominal Acoustic input level (dB SPL) (microphone):- 85 dB SPL Mechanical: Dimensions (Hx Wx D) (mm) :- 63 mm x 173 mm x 92 mm/ Thickness (mm):- 3 mm / Maximum table tickness(mm):- 45 mm / Microphone stem length (mm) :-310mm/ Mounting type :- flush-mounted Material:- Plastic ABS+ PC / Color in RAL:- RAL 9017 Traffic Black/ Connector type:- 6-pin connector male cable length (m):- 2 m/ Environmental:-Operating temperature (ºC - 35 ºC)/ Storage temperature (ºC):- - 40 ºC - 70 ºc/ Operating relative humidity, non-condensing (%):- 5% - 98%/ Air pressure (hPa):- 600 hPa - 1,100 hPa

Supply Installation Testing and Commissioning of Digital Delegate Unit with fixed microphone with flexible stem can be easily adjusted to suit the user- long 480- 500 mm /Short (310mm) as per instruction of Engineer-in-charge ,Built-in loudspeaker with volume control,Built-in volume control for headphones. The flush mounted discussion device with short micropone is the perfect solution for conference rooms where table space is key. The flexible stem allow the participant to adust the microphone to the most comfortable position. Possible Functions:- Possible-to-speak indication:- A white possible-to-speak indicator above the microphone button indicates when the microphone can be activated. Request-to-speak indication:- A green request-to-speak indicator above the microphone button and in the head of the microphone indicate when a request-to-speak has been added to the waiting list. The indicators flash green when the request-to-speak is first in the waiting list. Short or long microphone with flexible stem:- The fixed microphone with flexible stem can be easily adjusted to suit the user. For maximum comfort, a short 310 mmm (12.2 in) or long 480 mm (18.9 in) microphone stem is available. Built-in loudspeaker with volume control:- To ensure for optimum intelligibility, the loudspeaker volume of all discussion devices is centrally controlled from the control unit. Face-to face meeting feeling:- An authentic face-to face meeting feeling is achieved by allowing the loudspeaker and microphone to be on at the same time.

GSM immunity:- Immunity to mobile phone interference ensure clear, uninterrupted discussion. Controls and Indicators:- 1. Microphone button 2. Color-coded LED indicator above microphone button for showing the following states: microphone on, request-to-speak, and possible-to-speak. 3. Light-ring indicator in head of microphone. 4. Concealed initialization button at base of device for reassigning the network address. Connections 1. 1 x 6-pole circular female connector with cable locking recess - for loop-through connection of Discussion Devices. 2. 1 x 2 m (78.7 in) cable with a 6-pole circular male connector with cable lock. Technical specifications:- Power consumption (W):- 1.50 W Frequency response (-3 dB) (Hz):- 30 Hz- 20000 Hz/ Total harmonic distortion + noise (%):-1% / Minimum signal-to-noise ratio (dBA):- > 75 dBA/Sample rate (kHz):- 44.10 kHz

Maximum number of flush discussion devices supported per trunk :- 35 / Acoustic - Polar Pattern:- Cardioid/ Frequency response (-3 dB) (Hz) (microphone):- 125 Hz - 15000 Hz /Nominal Acoustic input level (dB SPL) (microphone):- 85 dB SPL / Mechanical - Dimensions (Hx Wx D) (mm) :- 63 mm x 173 mm x 92 mm /Thickness (mm):- 3 mm/ Maximum table tickness(mm):- 45 mm /Microphone stem length (mm) :-310mm/ /Mounting type :- flush-mounted Material:- Plas

tic ABS+ PC / Color in RAL:- RAL 9017 Traffic Black / Connector type:- 6-pin connector male /cable length (m):- 2 m /Environmental:- Operating temperature (ºC - 35 ºC) / Storage temperature (ºC):- - 40 ºC - 70 ºC / Operating relative humidity, non-condensing (%):- 5% - 98% /Air pressure (hPa):- 600 hPa - 1,100 hPa

Supply Installation Testing and Commissioning of Digital conference system controller with connection of up to 80 Discussion Devices from day one( provide expansion unit accordingly from day one) and expandable upto 220 Delegate Units ,Built-in MP3 recorder with internal memory and USB recording,Internal /External( Digital Acoustic Feedback Suppression) (DAFS) for ensuring superior speech intelligibility, support for automatic HD camera control,Web browser control for configuration, Built-in monitor loudspeaker,built-in loudspeaker and headphone socket allows for:live monitoring of a meeting , indicators for showing-Open microphone, Mains power on/off,Plus/minus buttons for setting the volume range, RJ45 Ethernet,USB recording LED indicator.

Supply , Installation , Testing & Commissioning of HDMI Extender Kit. Must extend over ethernet cable HD singal minimum upto 60 mtrs & 4K UHD signal minimum upto 40 mtrs. Must require no adjustment or Tunning. HDMI 1.4 Compliant, HDBaseT, HDCP compliant, Must Support Embedded HDMI Audio, Including Dolby® TrueHD and DTS-HD Master Audio. Bandwidth: 3.4 Gbps or better, should Supports HD 3D formats & PC resolutions up to WUXGA, HDCP Repeater and CEC bypass, Bi-directional infrared remote control extensions. Operating temperature: 0 to 40°C or better & Storage temperature: -20 to 60°C or better.

SITC of Distribution Amplifier 1 HDMI In 4 HDMI Out.

SITC of Switcher 4 HDMI In 1HDMI Out Audio De Embedder.

SITC of PTZ Camera ; USB based : Yes; Zoom : Minimum 20X Optical Zoom; Iris: f=5.57~110mm ; F1.6 ~ F3.5;Viewing Angle:3.3° (tele) –54.7° Wide ;Sensor:1 /2.8inch or better CMOS sensor; Pixels:2.07 Mega Pixel ; Video Format: SDI Video Formats: 1080P60/50/30/25/59.94/29.97 ; 1080I60/50/59.94. 720P / 50/ 30 / 25 /59.94/29.97; Minimum illiumination:0.5 Lux ; DNR:2D & 3D DNR; White Balance :Auto/Manual/One push 3000K / 3500K / 4000K / 4500K / 5000K / 5500K / 6000K / 6500K /7000K; Electronic Shutter : Auto/Manual; Focus : Should be Auto/Manual/One Push; BLC:ON/Off; WDR : Off/Dynamic level adjustment; Video Adjustment: Brightness, Color, Saturation, Contrast, Sharpness, B/W mode, Gamma curve; SNR : >55 dB; Interface:: USB 3.0 x1, DVi/HDMI x1, , LAN x1, RS232 x1; Video Compression Format:H.265/H.264 ; Control Protocol: VISCA/PELCO-D/Pelco-P; Baud Rate : 11520 / 9600 / 4800 / 2400 ; LAN Port :Yes; Network Protocol: RTSP/RTMP/ ONVIF, GB/T28181; Pan Rotation:+ 170° Tilt Rotation :-30°~+90° ; Pan Control Speed: 0.1~100°/second ;Tilt Control Speed : 0.1~45°/second ;Preset Speed: Pan: 100°/second, Tilt 45°/second ;Preset Number:255 preset

Supply Installation Testing and Commissioning of Popup Box, Pop–Up Table Mount Multi–Connection Solution, Elegant in–table compact solution, CE qualified, 4 Fixed Inputs — 15–pin HD, HDMI, 3.5mm & Ethernet. PORTS - HDMI connector,,Ethernet RJ–45 connector, 15–pin HD connector, 3.5mm mini jack.

SITC of Digital signal processor : Should have Double Core chip having 456MHz or better; Should have Microphone Inputs x 04 or more; Should have Microphone / Line outputs x 04 or more ; Should have Input processing’s with Preamp, Signal Generator, Expander, Compressor, 5-band parametric equalisation, Auto gain, AM auto mix function, AFC Adaptive Feedback Cancellation; Should have Output processing with Speaker management having 31-band graphic equaliser, delay, crossover, limiter, high and low channel filters; Should have Matrix Mixing of input and output signals, mixing component control or better; Should have Automatic Mixing Console ; Should have AFC Auto feedback elimination; Should have Auto Echo cancellation; Should have Auto Noise Cancellation module; Should have Automatic mixing console, Ducker, or better, Should have built-in USB as Microphone in and Audio out for Software based VC as well as for recording the conference and playing digital audio, Should have Central Control Command Cet Generator ; Should have Sampling rate of 48Khz or better, Frequency response of 20Hz – 20Khz + 0.2dB or better, Should have input gain amplification of -24～27dB 3dB,Level 1 with minimum 7 levels or better; Should have background noise -90dBu or better ; Should have THD+N ≦0.004% @4dBu or better ; Should have Automatic power failure protection memory function; Should have per channel phantom power 48V module or better. ; Should have software which should be configurable PC and also through Mobile devices like Smart phones, Tablet etc. Should have password facility to avoid misuse having separate password for the admin and separate for users. Should have facility to save the different setting done in a file upto 10

0 or more settings. ; Should have Ethernet Port RJ 45 x 1; Should have RS 232 x 1; Should have RS 485 x 1.

SITC of Wall mount Speaker: Power Tap: 10W/20W/40W/OFF-8ohm,Power at 8ohm, 60W;Peak Power: 80W,SPL@1M: 94±3db, Max SPL@1M: 112db, Frequency Response: 65-20KHz,Dispersion Angle: Vertical : 80° and Horizontal:100° (1KHz),Enclosure Material : PP Enclosure and 360-degree metal mounting bracket, Speaker 6.5” weatherproof woofer and 1” silk tweeter.

SITC of Amplifier: Power Output 410W Max., 350W RMS at 10% THD, 330W RMS at 5% THD, Output Regulation 2 dB, no load to full load at 1kHz, Input Channels 7 X Mic. 0.65mV/4.7k Ohms , 2 X Aux 100mV/470k Ohms, Frequency Response 50-15,000Hz ±3dB, Signal to Noise Ratio 60dB , Tone Controls Bass ±10dB at 100Hz, Treble±10dB at 10KHz, Outputs Line: 200mV/600 Ohms, 1V/1k Ohms, Speaker Output 4 Ohms, 8 Ohms & 100V, Digital Player MP3 Player with USB, SD Card & Bluetooth, Power Supply AC: 220-240V 50/60Hz , DC: 12V, Power Consumption : AC : 250VA DC : 4A, Power Consumption AC : 250VA DC : 4A, Consist of USB Pen drive Port, SD Card Plug and Play, Compatible with Radio & Bluetooth, EQ & Recording, 5 Channels Microphone Inputs, 2 Channels Aux Inputs, 1 Channel Line Output. 100V Constant Voltage Output and 4Ω\ 8 Ω \16 Ω Resistance Output.

"Supply Installation Testing and Commisioning of wireless handheld Microphone with -32 preset channels, with compatible groups of eight (8) channels for simultaneous use14 hour battery life from two (2) AA alkaline batteries , Rugged metal transmitters with backlit LCD display and battery gaugeNumber of Channels: 32 Modulation: ± 40 kHz Diversity: True Antenna RF Sensitivity: <1.0 μV for 12 dB SINAD Image Rejection: > 55 dB Squelch: Tone Code plus Amplitude,Frequency Response: 80 Hz – 18 kHz ± 2 dB Balanced Output: 20 dBV (max @ 40 kHz deviation) Unbalanced Output: Adjustable 8 mV to 0.755V RMS Distortion: < 1.0%, 0.4% Signal-to-Noise Ratio: > 100 dB

Laptop/ Core i5/16 GB RAM/ 512 GB SSD/

Supply installation testing Commsioning of 24 Uwith fully loaded including rack,pdu and all accessories required Standard rack to place all Av equipment

Supply Installation testing and commissioning of 5 KVA/ 4 KW True Online , DSP Controlled online UPS with 1 phase AC input 50Hz and 1 phase AC output with 60 minutes backup on 12V SMF batteries Bank with Rack along with inter connecting battery cables and cable from UPS to Battery bank. The UPS should be with IGBT Based Rectifier and Inverter and with LCD/LED display for monitoring of its status along with inbuilt Galvonic Isolation Transformer. UPS should have following Features: UPS power factor : Input PF should be 0.99 AND output PF not less than 0.9 , Efficiency: up to 97% without Isolation ,Communication interface :RS232/USB port and optional SNMP compatibility for remote Monitoring , Audible Alarm : Mains Failure/Low battery /UPS Warning /Overload/Fault & Bypass Mode , THDI: not more than 5% , Noise Level less than 70db ,CERTIFICATIONS & Standard : ISO-9001-14001 Certified ,Compatibility with DG Genset , Built in Automatic & Maintenance Bypass Switch , Warranty : 2 Years on UPS as well as on Batteries, Battery Make : Exide /Amaron/Quanta/ Panasonic Make Preferred/Approved Brand : APC-Schneider /Emerson –Vertiv /Legrand-Numeric.

Supply Installation Testing and Commisioning of 3X 2.5 sqmm FRLS Power Cable along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.

HDMI TO HDMI 20 MTR