Uthukuli block punjaithalavaipalayam pkgno 11

Amount

Earthwork excavation in all clauses of soils and depositing on bank with initial lead and lift for foundation as per ss20B

Collection and supply of gravel from approved quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete,

Cement Concrete 1:4:8 mix using 40mm metal including cost and conveyanceof all materials to work site and all labour charges etc.

Cement Concrete 1:2:4 mix using 20mm metal including cost and conveyanceof all materials to work site and all labour charges etc.

Brick work in C.M 1:5 mix using country bricks incuding cost and conveyance and all labour charges etc.

Above ground level

RCC 1:1.5:3 mix using 20mm metal including cost and conveyance and all labour charges etc.

Column above Grade beam

Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc.

colum & Sunshade

beams, lintels

Supply and fabrication of steel including cost and conveyance and alla labour charges etc. complete.

Weathering course with best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be listed) over the RCC roof slab in the proposition being brickjelly to lime 32:12:1/2 by volume and laid over into a single layer and consolidated to required finished thickness beating the mixture with wooden beaters keeping the surface constantly welted by sprinkling lime jaggery water including all other labour charges etc., complete

Finishing the top of the roof with one course of Machine PressedTiles of size 20 cm x 2 cm of approved quality laid in CEMENT MORTAR 1:3(One cement and three sand) 12 mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar,red oxide, etc., complete complying with standard specification

Plastering with cement mortar 1:5, 12mm thick including cost and conveyance and all labour charges etc.

Plastering with cement mortar 1:4, 20mm thick including cost and conveyance and all labour charges etc.

Paving the Floor with scratch proof vertified tiles of size 600x600x8mm laid in CM 1;2,10mm thick and pointing with white cement 0.40kg per sqm mixed with colouring pigment to siut the colour of the tiles including cost and conveyance of all materials to site and all labour charges etc complete

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data)

Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone M.Sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes 150mmX 150mmX 6mm set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc.,

Towards the cost of steel door of size 0.90 mx2.40m including all charges etc.

Towards the cost of steel door of size 0.75mx1.50 m including all charges etc.

Towards the cost of steel door of size 1.10mx2.40 m including all charges etc.

Towards the cost of steel ventilator of size 0.9x0.45 m including all charges etc.

Towards the cost of steel ventilator of size 0.6x0.45 m including all charges etc.

Towards the cost of steel Window of size 1.2mx1.6 m including all charges etc.

Supplying and fixing of cuddapah slab including cost and conveyance and all labour charges etc.

Supplying and fixing of Granite Sink of size 600 x 600 x 250mm including cost and conveyance and all labour charges etc.

Painting two coat with approved quality of distemper with colour over one coat of white cement for primier coat for the base including preparing surface and all materials cost labour etc

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete). The Putty should be got approved by the Executive Engineer

Painting two coats using Ist quality readymix enamel paint of approved colour over new iron work including cost and conveyance and all labour charges etc.

Cost & Supply For Baby W.C including cost and conveyance of all materials to work site and labor charges etc complete.

Cost & Supply For E W.C including cost and conveyance of all materials to work site and labor charges etc complete.

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying and fixing PVC Rain water down fall pipes of following dia meter etc., complete.

Wiring with 2 x 1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch Box and 5A FT switch with painting of suitable colour continuous earth wire connection of 1.5 sq.mm copper wire for light point / fan point (SD No.1)

Supply and fixing of 15 W LED Bulb

Wiring 2 x 1.5 sq.mm (22/0.30)PVC insulated unsheathed SC.cu. conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with in flush with wall covered with hylem sheet of 3 mm thick with painting of suitable colour for concealed PVC plug point (SD No.39) 5 pin plug point

supply and fixing of 1200mm sweep AC ceiling fan complete with stepped electronic regulator with 300mm down rod on the existing clamp SD 106

Supply and run of 2X6.0 sq.mm (22/0.3) polythene insulatedPVC sheathed heavy duty SC.Copper conductor of 1100 V grade in 25mm dia GI pipe(Class B) suitably bent on both ends with necessary Angle iron upright and end supportes for Mains [SD NO. 69]

Supply and run of 2 of 4.0 sq.mm polythene insulated PVC sheathed heavy duty SC.Copper conductorof 1100 V grade on 7/20 GI bearer wire for service connection mains [SD NO.65]

Supply and fixing of 1000 litre HDPE tank including cost and conveyance and all labour charges etc.

Supply and fixing of 25mm PVC pipe including cost and conveyance and all labour charges etc.

Supply and fixing of 25mm PVC Elbow including cost and conveyance and all labour charges etc.

Supply and fixing of 25mm PVC Tee including cost and conveyance and all labour charges etc.

Supply and fixing of 20mm Brass tap including cost and conveyance and all labour charges etc.

Provision for Name board

Provision of painting cartoons in hall and toilet & Letters, Pictures & Board, etc.

Provision of Handrail Arrangements , etc.

Provision for Photos

Provision for Rainwater Harwesting arrangements

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

MD Construction (BID ID -1314183)