Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.8 LAccepted-AOC | L1 | Accepted-AOC Being L-1 | |
| 2 | L2₹33.1 L+₹6.9 L (26.4%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN L1. | |
| 3 | L3₹35.3 L+₹9.1 L (34.7%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN L1. |
Tender Value
₹27 L
EMD Value
₹54,000
Closing Date
22 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tapan Naurial, Lt Col, GE
GE 864 EWS, PIN-913864,C/o 56 APO
PROVN OF CERTAIN SPL REPAIR, REVENUE AND LBW WORKS UNDER AGE B/R-III AT BB CANTT, SRINAGAR
2022_MES_565382_1
864/WS-62/2022-23
Open Tender
Civil Works
Item Rate
180 days
B B Cantt.
AS PER TENDER
7 documents required · 7 mandatory
₹500
GE 864 EWS
₹54,000
Yes
11 Jan 2023
25 Nov 2022
24 Dec 2022
25 Nov 2022
22 Dec 2022
10 Dec 2022
Amount
Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/loose soil complete all as specified and directed.
Excavating over areas not exceeding 1.5 m deep and getting out in any type of soil complete all as specified and directed.
Hardcore of Broken stone/boulders gauge not exceeding 63mm, deposited, spread & levelled in layers not exceeding 15 cm thick, watered & rammed to a true surface complete all as specified and directed.
Plain Cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete including sub base of floors complete all as specified and directed.
Precast Cement concrete 1:2:4 type C-1 (using 20mm graded stone aggregate) in block masonary with Hollow blocks, exceeding 10 cm in width and setting in CM 1:4, complete all as specified and directed.
Returning, filling in excavated approved soil, (soft/loose soil) including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.
Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Providing cement concrete 1:1½:3 type A-1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided etc and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.
Mild steel TMT bars 10mm dia and over cut to length,bent to shape required including cranking bending spirally for hooping for columns hocking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips quality conforming complete all as specified and directed.
Formwork to sides and soffits of beams, beam haunchings, girders, bressummers lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finish surface, complete all as specified and directed.
Providing precast cement concrete jallies 25 mm thick 1:2: 4 type B0 (using 12.5mm graded aggregate) set in cement mortar 1:4 complete, all as specified and directed.
Rendering 15mm thick in cement mortar 1: 4 on fair faces of brick work or concrete surfaces,finished even and smooth without using extra cement complete, all as specified and directed.
Prepration of new plaster surfaces of wall and applying two coats of cement based paint over a coat of primer, complete all as specified and directed.
2nd class hard wood clean sawn in scantling timber framed work and fix, complete all as specified and and directed.
M&L Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm mm thick of an colour having tensile strength of 550 Mpa as in the roof covering/cladding to wall, fixed with shelf tapping screws complete all as specified and directed.
M&L 6 mm thick ply wood 5 Nos of Ply grade BWR type BB, fixed with screw to timber frame work, complete all as specified and directed.
M&L 2nd class hard wood as in plain fillets rectangular, exceeding 3sq.cm but not exceeding 6sq.cm in section, wrought, fixed with nails complete all as specified and directed.
S&F second class hard wood boarding 15 mm thick,clean sawn jointed with butt hinges and with nails in eaves board complete all as specified and directed.
M&L Preparation of new wooden surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed or bedding layer in CM (1:4), complete all as specified and directed.
M&L 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in floor base of tiles, complete all as specified and directed.
M&L Glazed ceramic tiles in vertical surfaces 450x350x7mm thick set and jointed in neat cement slurry and pointed in white cement to match laid over and including 10 mm thick backing or rendering in CM (1:3), complete all as specified and directed.
S&F Vitreous china wash hand basin, white, flat back, of size 550 x 400mm including 32mm dia CP brass waste coupling, 32mm dia PVC waste pipe, cast iron brackets and making good disturbed surfaces in cement mortar 1:3 or PCC 1:2:4 complete all as specified and directed.
S&F Bib taps, brass, chromium plated, fancy type, long nose, with capstan head handle screwed down high pressure, including CP brass wall flanges, screwed for 15mm bore pipe connection complete all as specified and directed. Make : Jaquar, Cera or equivalent as approved by GE
S&F Stop valves, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down high pressure, with capstan head handle, screwed for 15 mm bore pipe, both ends for iron pipe or for unions and fixed. Make : Jaquar, Cera or equivalent as approved by GE
S&F Vitreous china squatting pan, orissa pattern size 580 x 440 mm white with integral foot rests and fixed with cement concrete bedding, complete all as per specified and directed.
S&F Vitreous china wash down water closet (pedestal pattern) coloured complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc, including plastic back, seat cover and jet and all other fitments, complete all as specified and directed.
S&F PVC flushing cistern 10 ltr, valve less, syphonic action type,low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.
S&F Vitreous china urinals, white, flat back, including Spreader,Partition, 32mm dia CP brass waste coupling, 32mm dia PVC waste pipe, cast iron brackets and making good disturbed surfaces in cement mortar 1:3 or PCC 1:2:4 complete all as specied and directed.
S&F Push button taps of Cast copper alloy complete all as specified and directed.
S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
S&F Gratiing PTMT 100 mm dia complete all as specified and directed.
S&F PVC Pipe 75mm dia laid in trenches or floors, complete all as specified and as directed.
S&F PVC Bends 75mm dia laid in trenches and floors complete all as specified and as directed.
S&F PVC junction 'T' 75mm dia laid in trenches and floors complete all as specified and as directed.
S&F PVC Pipes 110 mm bore laid in trenches/floor complete all as specified and directed.
S&F PVC 'P' trap 110 mm bore complete all as specified and directed.
S&F PVC vent Cowl 75 mm dia complete all as specified and directd.
S&F Aluminum anodised tubular towel rail 20mm dia including side brackets fixed to wall 60cm long, complete all as specified and directed.
S&F Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long complete all as specified and directed.
M&L Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed. Make-Rajshree Doors or equivalent as approved by GE.
M&L Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joining together with solvent cement, supplying & fixing in the frame at site as per Sketch of SSR Part-II & specification. Make: Rajshree Doors or equivalent as approved by GE.
S&F Aluminium, anodised, barrel tower bolts of extruded section of size 100mm, and fixed complete all as specified and directed.
S&F 75mm size butt hinges, medium weight cold rolled mild steel complete all as specified and directed.
S&F Extruded aluminium alloy handles, 100mm in size, fabricated type, anodised complete all as specified and directed.
M&L Mild steel framed works of water tanks and similar work conforming to Fe 290 (Gde- E 165), complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, hoisted and fixed in position including connecting up pipes complete all as specified and directed.
S&F Ball brass valve 20mm dia high pressure with polythene float and fly nut complete all as specified and directed. Make Parko cat part No 1527
S&F Stop valve copper alloy screwed down high pressur with crutch or butterfly handle screwed on both ends for iron pipes suitable for 20 mm dia pipe complete all as specified and directed.
S&F Galvanised steel water tubing (medium grade) of size 15mm bore with all fittings laid in floors wall ceiling, complete all as specified and directed..
S&F Galvanised steel water tubing medium grade of size 20mm bore with all fittings fixed to walls ceiling or laid in floors, complete all as specified and directed.
M&L Chequered cement concrete tile 30cmx30cmx25mm thick with hard glazed finish rubber topping with grey cement and no pigment set jointed and pointed in neat cement slurry in floor or path etc over and including 15mm thick screed bed in cm 1:6 complete all as specified and directed.
M&L 75mm thick cement concrete 1:4:8 type (using D-2 using 40mm stone aggregate) as in sub base, complete all as specified and directed.
M&L 50mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection finished even & smooth with out using extra cement including making joints 10mm wide and 30mm deep at spacing not more than 2.5m and at corners at mandatory and filled with sealing compound grade 'A' complete all as specified and directed.
M&L for Granite (of any type) work ,20 mm thick, (table rubbed and polished) in steps, jambs , pillars ,window cills ,cooking platforms ,and the like in cement mortar (1:4) including pointing in white cement (1;2) using marble dust with admixture of pigment to match with shade of granite, over and including 15mm thick screed bed in cm 1:3 complete all as specified and directed.
S&F wall mixture, 3 in 1 type, brass, chromium plated, fancy type, with capstan head handles with lettered 'hot' and 'cold', screwed down high pressure, including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, complete all as specified and directed. Make : Jaquar, Cera or equivalent as approved by GE.
S&F 15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe of size 15mm dia complete all as specified and directed.
S&F 15 mm bore cromium plated shower rose with arms complete all as specified and directed.
M&L plywood 9 mm thick with 5 ply fixed with screws to timber frame work complete all as specified and directed.
M&L soft wood paneling fixed on wall and ceiling with nails over ply wood including varnishing complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting ,any gauge, thickness including roof covering etc complete all as specified and directed.
S&F Galvanized corrugated 0.63mm thick mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in roofs walls etc of class 8, complete all as specified and directed.
S&F 0.80mm Plain,galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed.
M&L Preparation of newly or previously untreated steel surface exc 10 cm width or girth and applying two coats of synethic enamel paint over a coat of red oxide primer complete all as specified and as directed.
S&F 2mm thick fibre reinforced translucent sheet fixed with j hooks in roof complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.
S&F Roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, Angle channel or flat sections) of Fe-290 (Gde E-165) including distance pieces, cleats etc complete all as specified and directed.
S&F Framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed.
M&L for repairing of Nissan huts doors by greasing, repair/replacement of roller/ball bearing, rolling track, replacement of damaged sheets, welding, painting and to make functional to the entire satisfaction of Engr-in-charge complete all as specified and directed.
S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm, complete all as specified and directed.
Demolition of cement concrete (un reinforced) in ground floor and paving n.exc 15 cm thickness below or above GL complete all as specified and directed.
M&L for 40mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floor fair finished complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection finished even & smooth with out using extra cement including making joints 10mm wide and 30mm deep at spacing not more than 2.5m and at corners at mandatory and filled with sealing compound grade A complete all as specified and directed.
Demolition to Brick work or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles but built in cement mortar complete all as specified and directed.
M&L Brick work with sub class B old size bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed.
M&L Brick work with sub class 'B' old size bricks straight or curved on plan any radius in half bricks thick wall built in cement mortar 1:4, complete all as specified and directed.
M&L Rendering 15mm thick on surface other than fair face of brick work in cm 1:6 finished even and smooth w/o using extra cement, complete all as specified and directed.
Complete removing existing treatment including scraping, removing all mud cake with wire brush with gunny bags from old plastered surfaces with preparation of surfaces by using necessary filling compound 3 mm thick of Altek/Birla oil putty to obtain smooth/even finish using sand paper and applying two coats of distemper oil emulsion over a coat of alkali resistant cement based priming paint complete all as specified and directed.
Preparation of old steel surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for point wiring complete with PVC insulated and unsheathed, Flame retardant low smoke ( FRLS ) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core in and including rigid PVC concealed conduit not less than 19 mm dia, clip, with suitable MS terminal boxes (not less than 1.0 mm thick )and painted with one coat of red oxide primer all around and two coats of black bituminous paint including earth dolly with 3 mm thick plastic laminated sheet top cover of approved colours including 1.50 sqmm green solid copper conductor as continuous earth wire with all accessories including lugs required, complete all as specified and directed for the following :- (a) One light/fan point controlled by one switch.
Description all as per srl item No 81 here-in-before but One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.
Description all as per srl item No 81 here-in-before but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 sqmm green solid copper conductor as continuous earth wire with lugs complete all as specified and directed.
S&F switch piano flush button type 5 Amp single pole one way complete all as specified and directed.
S&F Switch socket outlet 3 pin 5 Amp AC 230 Volts piano flush type, complete all as specified and directed.
S&F Switch socket outlet 6 pin 15 Amp AC 230 Volts piano flush button type (multipurpose) complete all as specified and directed.
S&F Ceiling rose three terminals polycarbonate , isolated body complete all as specified and directed.
S & F exhaust fan (heavy duty) AC single phase 230/240 V of size 300 mm sweep with louver complete. Make : Havells/Bajaj / Usha
Supply and fix LED light fitting 1 x 20 watt, E-Lite LED curve with wide angle profile. High lumen batten with efficacy of 100 lumens Make : Havell,s Cat LHEXBXPNIN1W020 or equivalent Philips/Bajaj
S&F LED lamp fitting10W complete all as specified and directed. Make -SSK /Cona/ Havells or equivalent of approved make.
S&F storage type water heater 25 Litres capacity, vertical mounting, AC, 230 Volts, BEE 5 Star rating including connecting cord and plug, safety valve, nuts and bolts etc complete all as specified and directed by Engr-in-charge.
S&F sheet metal enclosures with socket plug top single pole and neutral enclousere with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.
PVC connection hot and cold 15 mm size with PTMT nuts of length 750 mm complete all as specified and directed.
S&F angle stop valve of PTMT any colour pressure screwed for iron pipe and fixed complete all as specified and directed.
S&F Sheet Metal enclosure double door for mounting MCBs with 200 Amps rated bus bar 6 way AC 230 Volt with IP-54 protection compelete all as specified and directed. Make Indo Asian Cat Part No.811826 or equivalent in Havells/Hager
S&F MCB SPN 40 amp, 240 V, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity complete all as specified and directed . Cat part No. 811152 of make Indo Asian or equivalent in Havells/Hager
S&F single pole MCB 6 to 32 Amps 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘c’ curve, 10 KA breaking capacity complete all as specified and directed. Cat part No. 811122 to 811129Make Indo Asian or equivalent in Havells/Hager
M&L for cutting of existing pipe line any size with the help of tool and making connection complete all as specified and directed
Supply and laid in trenchs and on wall galvanised iron water tubes 20 mm bore medium grade with all fitting tee, elbow, nipple, socket, union etc complete all as directed..
M&L for 1100 Volts grade heavy duty cable weather proof PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape & overall PVC sheathed in service connection suspended by insulating hanger not more than 1 meter apart including 4 mm GI suspension wire one twin core cable flat or circular of size 10 Sq mm to be connected to existing MCB box / Main switches complete all as specified as directed.
Earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore ( light grade) and watering pipe 20 mm bore GI pipe (medium grade ) and chamber of PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) and coping shall be in PCC 1:3:6 type C1 using 20 mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg complete all as specified and directed.
S&F ventilating made out of high quality engineering plastic, resistant to colour change with anti static properties, 250mm sweep suitable to work on 230 Volts 50 Hz AC supply of Havells or equivalent of CG/Bajaj including connecting to ceiling rose complete all as specified and directed.
M&L in replacement of 6 Sqmm 1100volts grade heavy duty PVC insulated multistranded aluminium conductor and overall PVC sheathed in service connection suspended by insulated hangers not more than 1m apart incl 4mm suspension GI wire one twin core cable flate porcelain insulators etc.
S&F Lamp holder insulated body PVC/polycarbonate with back plate suitable for batten fitting complete all as specified and directed. Make Anchor/Cona/Standard
S&F 10 Watt 6000K LED Bulk head luminaries with opal diffuser, etc complete with accessories complete all as specified and directed. Make - HPL (HLPLEDBH10W(CW))/ Havells/HPL/CG)
S&F LED 10 W (candle /ball type) with B-22 base, complete all as specified and directed. Make -Havells/Philips/Halonix
ZAHOOR ENGINEERING WORKS
M/S TAJ DIN KHARI
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .