Interior Fit out work for office space of NICSI at Tower A, 3rd Floor, World Trade centre, Nauroji Nagar, New Delhi

S NO DESCRIPTION AMOUNT AMOUNT AMOUNT AMOUNT

DSR Amount (After

DSR Correction NON DSR DSR+NDSR

18.00 VESDA (Very Early Smoke Detection Apparatus) 0.00 0.00 758,220.00 758,220.00

19.00 RODENT REPELLENT SYSTEM 0.00 0.00 111,940.00 111,940.00

20.00 WATER LEAK DETECTION SYSTEM 0.00 0.00 167,368.00 167,368.00

Grand Total (DSR+NDSR) Including GST 145,397,662.00

Grand Total (DSR+NDSR) Including GST 145,397,662.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - CIVIL WORKS

QUANTITY UNIT RATE AMOUNT AMOUNT

S NO DSR/MR DESCRIPTION

DSR 2023 VOL-1 DSR RATE NON DSR

A FLOORING WORKS

CEMENT CONCRETE: Providing and laying in position CEMENT CONCRETE of specified grade exluding the cost of centring and shuttering-all work upto plinth level.

4.1.8 1: 4: 8 (1 Cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) 90.00 CUM 6812.00 613080.00

RAISED FALSE FLOOR: Providing and fixing removable raised/false access flooring with systemand its components of approved make for different plenum height

with possible height adjustment upto 50mm, comprising of modular loadbearing floor panels supported on G.I. rectangular stinger frame workand G.I. Pedestal etc. all

complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of:

(a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to

the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded

stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the

required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl

(b) Stringers system in all steel construction hot dipped galvanized ofrectangular size 570x20x30x0.80mm thick having holes at both ends for securing the stringers on

to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive

11.54 the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance

between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access Floor

panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Gauges: top

0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy

coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight

foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology upto 1mm thickness for superior

adhesion and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre

of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all

complete as per the approved manufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed on the side of the panel to

ensure the quality of the product.

11.54.2 450mm Finished Floor Height (FFH). 20.00 sq m 5977.35 119547.00

ALUMINIUM SKIRTING: Supply of 100mm Aluminium (Grade 6063) Skirting with 15 micron anodising In Natural Finish. Thickness 1.30 to 1.50mm. Designed to 600.00 metre 360.00 216000.00

conceal screws. Seamless finish. Complete with Rubber/ PVC Jointers and Gasket.

ENGINEERED WOODEN FLOORING: Supplying and Installation of engineered wooden flooring of total thickness 13 mm -16 mm, Toplayer PEFC controlled Core 150.00 sq m 6168.00 925200.00

4 MR board PEFC controlled Backing layer PEFC controlled sources Wood Veneer 2 mm Tongue and groove Length Uniclic Width Uniclic Multifit Domestic use Conditions

as per direction of engineer in charge.

VITRIFIED TILES: Providing and laying Vitrified tiles full body charged with smooth surface in floor (thickness 15 mm to be specified by the manufacturer), with water

absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified

quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, approved make Kajaria, Somany, RAK or equivalent. as per direction of

Engineer-in charge.

a MR Size of Tile 1200X2400MM 22.00 sq m 2969.76 65334.72

b MR Size of Tile 1200x600mm. (FULL BODY) 750.00 sq m 2536.67 1902502.50

c MR Size of Tile 600X600MM 545.00 sq m 1732.36 944136.20

d MR Size of Tile 600X600MM(Anti Skid) 10.00 sq m 1856.10 18561.00

6 11.48.4 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of 1327.00 174.5 231562

hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 1000x1000

CARPET TILES: Providing and laying carpet tile flooring. Carpets shall be of Type 6 nylon loop pile carpet tiles/Plank. The carpet shall have sufficient gauge (1/10 ~ 60.00 sq m 4571.00 274260.00

1/12) with sufficient stitches (10~13) per inch. The carpet shall be solution dyed fibre content or with injection printing technology. The carpet shall have the pile height

ranging from (2.0 ~ 3.0) mm with average density higher than 4500 Oz/ cubic yard. The total thickness of the carpet tile shall also range from (5.5 ~ 6.0) mm.

ITALIAN MARBLE: Providing and laying machine cut, mirror polished, Italian Marble brass brass inlay stone flooring laid in required pattern in linear portion of the

building all complete as per architectural drawings, with 18mm thick stone slab laid over 20mm (average) thick base of cement mortar 1: 4 (1 cement: 4 coarse sand)

7 MR laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing,

curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

18 mm thick Italian Marble stone slab in all colour and shade 350.00 sq m 6438.00 2253300.00

Digitally signed by AMIT

IPS FLOORING: 52mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 210.00 sq m 978.45 205474.50

graded stone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6

mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry,

but excluding the cost of nosing of steps etc. complete.

Providing and laying gang saw cut 18 mm thick granite flooring , mirror polished pre moulded and pre polished machine cut granite stone of required 15.00 sq m 5977.35 89660.25

size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of

cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc.

complete as per direction of Engineer-in-Charge. basic rate of granite 150 Sqft

TOTAL FLOORING WORKS 1259323.75 6599294.42

B FALSE CEILING WORKS

GYPSUM BOARD CEILING: Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from

M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick

with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other

flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate

G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered

flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips

1 12.45 made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm

long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of

gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush

finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150

mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light

fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in

Charge but excluding the cost of painting with

12.45.1 12.5mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) 780.00 sq m 1355.80 1057524.00

LINEAR OPEN CELL CEILING: Providing and fixing of Star 3 linear cell ceiling made out of Aluminium. The assembled cell ceiling panels shall be in size of 550.00 sq m 5100.00 2805000.00

600x1200. The assembled cell ceiling panels shall made out of main blades in 3mm (W) x 20mm (H) in 1200mm (L), installed at 30mm c.c. and cross connected to

secondary blades in 9mm(W) x 22mm (H) in 600mm (L) with 375mm pitch. The assembled cell ceiling panels are then clipped into U-94 carriers in Aluminium, pre-

2 MR coated in black enamelled finished at 1200mm c.c. Wire clips shall hold the cell ceiling panels into the U-94 carriers. Once the U-94 carriers are installed then primary

angles made out of GMS, type U1040 are cross connected to the U-94 carriers at 1200mm c.c. for lateral bracing The whole ceiling shall be suspended by M6 threaded

rods installed 100mm c.c.All panel modules must be hingeable through wire clips.Finish of cell ceiling panels: metallic silver in RAL 9006.

VENEER CEILING: Providing and fixing Veneer finished ceiling feature made of 19mm commercial board and all exposed surfaces finished in 4mm 90.58 sq m 5806.76 525976.32

thick veneer of approved shade including framing, all fixing hardware, accessories, making cove, cutout for light fixtures and any other incidentals

3 MR which may require to secure to false ceiling and to accomplish the work in all respect as per detail drawings and as directed & approved by architect.

Rate quoted to include vertical drops, making cove and all cut-outs required for light fixtures and other services cut-outs and necessary supports with

hitech rods from the true ceiling complete as directed by Architect. BR of Veneer 180/-

CUSTOMISED PERFORATED MESH FASLE CEILING (600 x 600): Supply & Install: Loop Type 2 system formed as an open metal ceiling with an open area of more 550.00 sq m 5100.00 2805000.00

than 50% and to the flare [5mm] of the perforation pattern [RV-50-40] the ceiling has a three-dimensional visual effect and hides the insight into the plenum. Bypassing

the perforation, the S-shaped sides of the LOOP interlock both the long and front side joint with a non magnetic suspension, the elements are installed with a

circumferential 1 mm joint, thus compensating tolerances in x and y direction. The non-magnetic suspension system effectuates a self-alignment of the elements

[puzzle effect]. The module size 966x1115x1.0mm GMS is perforated with 60mm deep drawn holes .The substructure consists of a form perforated L profile [U1040] as

4 MR a lateral grid which is suspended from the ceiling with nonius adjustable upper and lower parts or with threaded rods using official approved dowel plugs. The grid

profiles are to be connected together at the ends by means of longitudinal connectors [U 1041] [screw fasteners]. The spacing of the grid profile is according to the

requirements of DIN EN 13964. On profiles angles, C-band raster as secondary profiles are bolted on by means of C channel hanger bracket with M6 bolts. Only

construction parts approved by the manufacturer may be used. Provide necessary supports, provisions as per the architects Instructions. Tolerances according to

TAIM, DIN EN 13964 and quality controlled to ISO 9001:2008 approved by TUV.Finish of ceiling is in RAL 9016 white/ RAL 9006 Silver grey powder coated with

minimum 60 microns paint thickness.

BAFFLE CEILING : Providing & Installation of Baffle ceiling system comprises of 50 mm x 100 mm (50 mm width & 100 mm Height) U Shape panels in RAL color 50.00 Sqmt 6900.00 345000.00

finish. Panels shall be made of 0.5 mm thick galvanized steel after Powder-coated and length up to 4000 mm. Panel shall be high corrosion resistance and good color

stability. Centre to Centre panel gap will be 150 mm. Panels are fixed on to roll formed carriers 20 mm wide x 40 mm deep out of 0.80 mm G.I sheet Powder-coated

5 MR color with cutouts to hold the panels in module of 50 mm at maximum 1200 m c/c. Carriers are suspended from the roof or truss by 6 mm dia. galvanized steel wire rod

hanger with special height adjustment suspension clip at max. 1200 mm c/c. Hangers are fixed to the roof by ‘J’ hooks or ceiling brackets and nylon inserts. Panels are

factory cut in lengths up to maximum 4.0 m to suit site dimensions or shop drawings. Top cap and side cap are used to cover the edges of the panels.

TOTAL FALSE CEILING WORKS 1057524.00 6480976.32

3 WALL FINISHES WORKS

Digitally signed by AMIT

GLASS PARTITION Providing & Fixing of Sleek Partition System SG 50 ie. Single glazed modular system consist of Aluminium section of 20*75*2 mm thick. All 15.00 sq m 5806.76 87101.40

sections duly anodised up to 15-20 microns with 6003 grade and required accessories ie glass to glass aluminium I sections, T section & 90 degree sections & Glass

1 MR packing to adjust the floor level. Ceiling profile & Floor profile and wall profile are 20 mm visible face and 50 mm wide. Profiles will come in three sides alongwith ( Top,

Bottom and Verticle on Wall side) Forth Verticle will come where No adjusant door comes. Partition will have 10mm toughen glass & insertion of silicon/Thermoplastic

gasket to adhere the glass firm & airtight.

WOODEN DOOR FRAMES: Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold

2 fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood 0.83 cu m 142949.70 118934.15

WOODEN BATTENS: Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug

3 etc. including priming coat complete.

8.27.1 Kiln seasoned and chemically treated hollock wood 1 CUM 187277.65 187277.65

FLUSH DOOR SHUTTERS: Providing and fixing on all height prefabricated factory made 40mm thick flush door shutter in existing door frame bounded with BWP type 67.20 SQM 3837.60 257886.45

synthetic resin adhesive & wooden fillers as per IS 848 -1974 shutter should be confirm IS:2202 (part-1) non decorative type flush door of area up to 1.80 to 2.50 sqm

and nothing shall be paid on account of size variation upto 5% plus mimus of make Greenlam, Duro, Century or Equivalent with both side 4mm thick decorative teak

veneering of make sapele/white american oak/vintage teak including fixing on all edges 8mm thick second class teak wood margin/lipping with 8 mm thick clear

4 MR. vision/frosted glass fitted vertically in flush door shutter of make Saint Gobin, Modi Guard & Hindustan National Glass fixed all-round by 4mm thick second class teak

wood margin/molding and size of cut in flush door shutter will be approx. 200x1800mm or as per approved drawing and one no. of door rubbershutter finished

complete with PU polish all-round i/c SS butt hinges and SS screws all complete as per the direction of engineer-in-charge. (Note: this item is inclusive of all material,

T&P and labour involved and the work shall be executed as per the approved drawing).

FLUSH DOOR FLOOR MACHINE : Providing Double cylinder Floor Spring D-120 for Wooden door with Closing Force EN 4 with Maximum door weight 120 Kg. 32 SET 15039.00 481248.00

5 MR Maximum door width 1250 mm.Closing speed : 130° Final closing speed : 15-0°. Hold Open (standard): 90° hold open. Weight of floor spring approx : 6kg, 5,00,000

cycles Tested. approved make and model all complete as per the direction of Engineer-in-charge.

9.112 WOODEN LIPPING:Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved 166.40 metre 102.15 16998

quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge.

7 MR Providing top and Bottom Strap/Door Pivot for wooden doors of approved make and model all complete as per the direction of Engineer-in-charge. 32.00 set 705.03 22560.96

8 Providing and Fixing 60 mm Ultero Cylinder 1CK Antique Brass Cylinder One side knob and one side regular key for wooden doors of approved make and model all 2.00 each 1602.87 3205.74

complete as per the direction of Engineer-in-charge.

9 Providing and Fixing REMO Rose Handle Antique Brass for Store, of approved make and model all complete as per the direction of Engineer-in-charge. 28.00 each 3949.10 110574.80

10 Providing and Fixing Twist Rose Handle Antique Brass for Director cabin of approved make and model all complete as per the direction of Engineer-in-charge. 2.00 each 5342.90 10685.80

11 Providing and Fixing 450x15x15 mm ss 304 Tower bolt -Square Type with screw for Wooden Doors of approved make and model all complete as per the direction of 32.00 each 1986.17 63557.44

Engineer-in-charge.

12 Providing and Fixing 240 mm lock body Antique Brass for wooden doors of approved make and model all complete as per the direction of Engineer-in-charge. 32.00 each 1672.56 53521.92

13 Providing and Fixing Concealed Door closer T660 -60 kg (CE certified) for wooden doors of approved make and model all complete as per the direction of Engineer- 32.00 each 7340.68 234901.76

14 Providing and Fixing SS 304 Hinges Four Ball Bearing 100x75x3 mm (with screws) for wooden doors of approved make and model all complete as per the direction 128.00 each 487.83 62442.24

of Engineer-in-charge.

Poviding and fixing partition upto ceiling height consisting of G.I. frame and required ply board, including providing and fixing of frame work made of special section

power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of

32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or

MR suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed

vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along

both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre,

Digitally signed by AMIT

and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The 1089.00 SQM 1283.33 1397546.37

boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5

mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws,

75mm overall thickness partition with 12 mm thick ply board (Board with BIS certification marks)

16 9.140.1 Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, 1306.80 SQM 1224.65 1600372.62

complete as per direc on of Engineer-incharge (Frame work shall be paid for separately). 12 mm thick commercial ply conforming to IS : 1328 BWR type

17 MR - 49 Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, 653.40 SQM 1080.61 706070.57

complete as per direc on of Engineer-incharge (Frame work shall be paid for separately). 8mm thick commercial ply conforming to IS : 1328 BWR type

18 MR - 50 Providing and fixing plain lining with necessary screws/ nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden/ steel frame work, 217.80 SQM 1021.74 222534.97

complete as per direction of Engineer-in-Charge 6 mm thick commercial ply conforming to IS : 1328 BWR type

19 MR - 51 Providing and fixing plain lining with necessary screws/ nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden/ steel frame work, 217.80 SQM 962.87 209713.09

complete as per direction of Engineer-in-Charge 6 mm thick mdf

8.28.1 Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, 500.00 SQM 1946.25 973125.00

including priming coat on unexposed surface with : Decorative veneer facings of approved manufacture

LACQUERED GLASS: Providing and fixing of 6mm thick annealed SGG Planilaque Evolution (premium GRIHA rated lacquered glass from Saint- 150.00 SQM 5500.00 825000.00

Gobain) of approved color by Architect/ Client / Customer, fixed with SGG ULTRAFIX (compatible neutral core silicon/ double sided tape) on a

perfectly leveled 12mm thick water proof marine plywood / MDF / Mineral fibre board which is mounted on the RCC wall/any other structure. Lacquered

19 MR glass must be made industrially (via curtain coating process); opaque (if viewed against a support wall), coated with PU lacquer (50 micron thick); color

consistency (measured by Minolta spectrophotometer CM5081); highly durable (passes PERSOZ hardness test for minimum 220 oscillatios); humid

resistant (conforms to BS EN 1036 1999); environmentally friendly (no lead, no arsenic, no copper, noformaldehyde); appropriate recycled content

(12% post industrial/ 6% post consumer); compressive strength (1000 MPa) & tensile strength (40 MPa), same as float glass;

20 mm Flat VMT Panels: Supply of VMT Printed 20 mm LD PET FLAT panels which shall be processed with VMT technology for surface 180 6592.04 1186567.20

customization, colour options and pattern as per the designers requirement, the panel shall be made from-

-100% polyester fiber, with up to 70% recycled fiber. size of panel 2800mm x 1200mm (± 0.5mm).

Panel Should be anti fungal as per ASTM G:21 and also Non-toxic, non-irritant, and fire compliance with safety standards confirm as per BS 476 Part

6 (Fire Propagation) & Part 7 (Surface spread of flame) ,ASTM E 84 Class A, EN 13501 part 1C, S2,d0 for interior applications. Noice reduction

20 MR coefficient (NRC) - 0.70 with direct fix.

The product should be 100% make in india and OEM must have ISO CERTIFICATIONS- complying to- IGBC membership

ISO 14184-2 (no formaldhyde)

ISO 9001 (Quality Mangement System)

ISO 14001 (Environmental Management System)

ISO 45001 (Ocupational helth & safety management system)

Makes : Uniacoustic, Wooven Image, Softlite, Acupanel

Vicstrip : Supply of Vicstrip (single slat/double slat)having size of 2400x600x13mm(+/- 0.5mm) thickness, backing of 12 mm PET panel with front facia 50 5506.43 275321.50

of 1 mm laminate. The product use for absorption of medium and high frequency range with NRC of 0.50 direct fix. Panel Should be anti fungal as

per ASTM G:21 and also Non-toxic, non-irritant, and fire compliance with safety standards confirm as per BS 476 Part 6 passes (Fire Propagation) &

Part 7 class2 (Surface spread of flame) ,for interior applications-

The product should be 100% make in india and OEM must have ISO CERTIFICATIONS- complying to- IGBC membership

21 MR ISO 14184-2 (no formaldhyde)

ISO 9001 (Quality Mangement System)

ISO 14001 (Environmental Management System)

ISO 45001 (Ocupational helth & safety management system)

Makes : Uniacoustic, Wooven Image, Softlite, Acupanel

LAMINATE PANELLING: Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high

21 9.127 density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved

MR Polishing in PU Poliosh finish clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed 770.00 SQM 4700.00 3,619,000.00

1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos.

2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.

3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further

smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be

allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.

Digitally signed by AMIT

4. On this, 1st coat of polish is applied with spray gun using PU clear polish and PU thinner in required proportion. This 1st coat is allowed to dry for 24

hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final PU polish is applied with compressor

pressure spray gun using PU clear polish and thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be

done in 1 or 2 layers without gap of time.)

13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete 780.00 sqm 262.70 204906.00

23 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable 780.00 sqm 73.95 57681.00

cement primer on wall surface having VOC content less than 50 grams/litre

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. 200.00 sgm 19.75 3950.00

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of

approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out

14.1 joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction

of Engineer-in-Charge.

14.1.2 With cement mortar 1:4 (1cement: 4 coarse sand) 50.00 Sqm 560.50 28025.00

Providing and fixing Roller Blind system with remote consisting of a coated aluminium tube of 38 mm diameter of approved colour with provision of 156.75 SQM 1237.40 193962.45

fabric clamping. The Fabric is rolled up and down through a chain drive system with built in drive gear and an over run brake system. The side

27 MR brackets are universal type suitable both for wall and ceiling mounting. The bottom end of the fabric is rolled over an oval shape aluminium tube with

provision to lock the fabric.The rate shall be inclusive of all the necessary material,required hardware, labour, transportation, necessary for the

complete execution of the item .

PELMET: Fabricate and install pelmet made of 19mm thick board, up to 300mm high and in line with external glazing as per details of Architect. Rate to include 500.00 RM 225.00 112500.00

finishing exposed surfaces of the Pelmet with 1mm laminate.

Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin 900.00 Sqmt 358.50 322650.00

29 12.57 Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge.

TOTAL WALL FINISHING WORKS 3804763.42 10135902.66

SHOP DRAWINGS: Preparation of complete set of shop drawings including finishing, MEP services, details, design calcualtions etc. and for prepration of as built 1.00 LS 1434682.00 1434682.00

1 MR drawing any other details as and when desired by Engineer Incharge/ client. A qualified professsional for the purpose shall be appointed after due appproval from

Engineer-In-Charge.

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to 10.00 cum 494.10 4941.00

2 1.1.18 approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable in urban areas

having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more.

4.1. Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 5.00 cum 7878.50 39393.00

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in

6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) 8.89 cum 9344.35 83071.00

6.13 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

6.13.1 Cement mortar 1: 3 (1 cement: 3 coarse sand) 10.00 sqm 1150.50 11505.00

DEMOLITION & DISMANTLING WORKS

Demolition of brickwork manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per 5.00 cu m 2060.20 10301.00

the direction of the engineer in charge. In cement mortar

Dismantling door, windows and clerestory widows (steel or wood) shutter including chowkats, architrave, holdfasts etc complete and stacking within 50 metres lead. Of 5.00 Nos 502.75 2513.75

area beyond 3 sq. metres

CUSTOMISED STORAGE UNIT: Supply and fixing of full height storage units (upto 450mm depth) made out of 18mm plywood finished with approved .8mm laminate 180.00 SQM 11265.00 2027700.00

8 MR on the inside and outside. Including Glss/Handles/nuts/bolts/ all hardware etc. Hardware used of Hettich make.Compleate as per the direction of Engineer in charge

Digitally signed by AMIT

FIRE GLASS WITH FRAME - Supply & Installation of Frame with Glass , Firetech cold- formed steel frame with 120 minutes of integrity and radiation control (EW120). 5.00 SQM 64417.00 322085.00

The system confirms to IS:3614 (Part II) or EN 1634-1:1999, tested and certified. The frame shall be finished with a approved fire resistant primer or powder coating in

9 MR desired shade as per the direction of Engineer- incharge. Glass - The glass should be 13mm clear 120 min fire rated for integrity, Radiation control (EW120) and partial

insulation (EI30), Non wired toughened interlayed glass with a light transmission of 86%, U-value of 5.0W/Sqmt K, solar factory of 0.72, energy transmission 66% and a

sound reduction of 38 (-1, -2) dB and compliant to class 1 (B) 1 category of Impact resistance as per EN 12600. The glass shall provide bi-directional (Symmetrical) fire

TOTAL MISCELLANEOUS WORKS 151724.75 3784467.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

S NO DESCRIPTION UNIT QTY RATE

2023/ MR AMOUNT AMOUNT

Supply, Installation, Testing and Commisioning of SINGLE LEVER

CONCEALED BASIN MIXER (WALL MOUNTED) WITH SPOUT

(COMPOSITE ONE PIECE BODY)

Supply, Installation, Testing and Commisioning of TABLE TOP

BASIN, SIZE: 630x460x130mm

Supply, Installation, Testing and Commisioning of suitable

compatible WASTE COUPLING 32MM- FULL THREAD- WITH

CERAMIC CAP-*130MM HEIGHT *65MM CERAMIC CAP

Supply, Installation, Testing and Commisioning of BOTTLE TRAP

(WITH INTERNAL PARTITION) 32mm SIZE WITH 300mm &

MR 4 190mm LONG WALL CONNECTION PIPES & WALL FLANGE EACH 2 3284.00 6568.00

Supply, Installation, Testing and Commisoning of RIMLESS, BLIND

INSTALLATION WALL HUNG WC WITH UF SOFT CLOSE SLIM

MR 5 SEAT COVER, HINGES AND ACCESSORIES SET, SIZE: EACH 2 15087.00 30174.00

Supply, Installation, Testing and Commissioning of PNEUMATIC

Supply, Installation, Testing and Commisoning of ANGULAR

MR 7 STOP COCK WITH WALL FLANGE EACH 2 4823.00 9646.00

Supply, Installation, Testing and Commissioning of CONCEALED

MR 8 STOP COCK WITH ADJUSTABLE WITH WALL FLANGE 15mm EACH 2 4965.00 9930.00

Supply, Installation, Testing and Commisiong of HAND SHOWER

(HEALTH FAUCET) WITH 8mm DIA 1.2 METER LONG FLEXIBLE

AND WALL HOOK ALD-CHR-573 or equivalent

Supply, Installation, Testing and Commisiong of PNEUMATIC

SINGLE PIECE SLIM CONCEALED CISTERN BODY WITH

INSTALLATION KIT & “S-TYPE” DRAIN PIPE CONNECTION SET

FOR WALL HUNG WC (WITHOUT FLUSH CONTROL PLATE)

Providing and fixing P.V.C. waste pipe for sink or wash basin

17.28 including P.V.C. waste fittings complete.

17.28.2 Flexible pipe

Providing and fixing mirror of superior glass (of approved quality)

complete with 6mm thick hard board ground fixed to wooden cleats

with C.P. brass screws and washers complete.

Providing and fixing C.P. brass angle valve for basin mixer and

18.53 gyser points of approved quality conforming to IS : 8931

18.53.1 15 mm nominal bore EACH 12 574.30 6891.60

Cutting chases in brick masonry walls for following diameter sand

cast iron/centrifugally cast (spun) iron pipes and making good the

same with cement concrete 1:3:6 (1 cement: 3 coarse sand: 6

graded stone aggregate 12.5 mm nominal size) including

14 necessary plaster and pointing in cement mortar 1:4 (1 cement : 4

Cutting holes upto 30x30cm in walls including making good the

With common burnt clay F.P.S. (non modular) bricks

Making chases upto 7.5 X 7.5 cm in walls including making good

18.78 16 and finishing with matching surface after housing G.I. pipe etc. METRE 4 202.90 811.60

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all

CPVC plain & brass threaded fittings, including fixing the pipe with

clamps at 1.00 m spacing. This includes jointing of pipes & fittings

with one step CPVC solvent cement and testing of joints complete

as per direction of Engineer in Charge.

Internal work - Exposed on wall

18.7.2 20mm nominal outer dia pipes METRE 20 335.00 6700.00

18.7.3 25mm nominal outer dia pipes METRE 20 401.55 8031.00

18.7.4 32mm nominal outer dia pipes METRE 5 518.75 2593.75

18.7.5 40mm nominal outer dia pipes METRE 5 702.95 3514.75

18.7.6 50mm nominal outer dia pipes METRE 5 934.15 4670.75

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all

CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps

at 1.00 m spacing.

This includes jointing of pipes & fittings with one step CPVC solvent

cement and the cost of cutting chases and making good the same

including testing of joints complete as per direction of Engineer in

Concealed work including cutting chases and making good the

18.8.1 15mm nominal outer dia pipes METRE 20 497.80 9956.00

18.8.2 20mm nominal outer dia pipes METRE 20 537.60 10752.00

18.8.3 25mm nominal outer dia pipes METRE 5 627.25 3136.25

18.8.4 32mm nominal outer dia pipes METRE 5 739.30 3696.50

Providing and fixing C.P. brass long body bib cock of approved

18.51 quality conforming to IS standards and weighing not less than 690

18.51.1 15 mm nominal bore EACH 2 798.95 1597.90

Providing, fixing, jointing and testing in position of ISI marked UV

stabilized UPVC pipes for soil, waste, and vent, Type-B as per

IS : 13592 suitable for rubber ring joints, including all neccessary

specials and fittings (confirming to IS:14735) i.e. bends, tees,

junctions (with or without doors), reducers, WC connectors,

couplers, expansion joints / bellows, cowels, clamps, rubber rings,

clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp

& hangers etc. in concealed / inside duct / under floor & basement

ceiling / external work etc. including chase cutting as required,

excavation and back filling in all kind of soils, suspended from floor

under false ceiling or embedding the pipes laid under floors /

building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2

coarse sand : 4 graded stone aggregate 20 mm nominal size)

including cost of shuttering for proper completion of the work,

breaking and making good the walls and floors etc. after pipes

20 have been duly laid and tested. The rubber ring shall confirm to

The Pipes will be supported with threaded G I rods & U clamps with

nuts, washers etc on 50x50x5 mm slotted angle. The cost will

include all support arrangements. The work includes

commissioning of all pipes lines as per drawings and specifications

and as directed by engg-in-charge at site.

a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 40 536.00 21440.00

b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 10 416.00 4160.00

Providing, fixing, jointing and testing in position ISI marked

(IS:4985) UPVC pipes of min 6 Kg/ Sqcm rating with fitting for

waste pipe from fixtures to floor trap including reduces, enlarger,

socket, couplers, bends, tees etc including fixing at wall/ ceiling

level supported by clamp & hangers etc. cutting holes in wall/

floors/ slabs and making good the same with cement concrete

1:2:4 complete as required.

Providing & fixing UPVC Floor trap of self cleansing design with

stainless steel grating complete in all respects.

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser

Extra for providing & fixing 125 mm dia C.P. grating in place of C.I.

grating over floor traps.

Providing & fixing of SS Floor Cleanout, round or square with

rubber seal and flat round cover with screws and other required

fitting complete as required.

Supply, Installation, testing and commisioning of toilet waste water

super quiet portable pumping station. Pump upto vertical 5 meters

and horizontal 100 meter from toilet to vertical shaft with inlet

connection in portable pump side inlet of 50, 75, 110 as per

requirement to complete the work as per the directions of engineer

Providing and fixing stainless steel tray below sewage pipe of size

MR 26 200x200x200 mm of grade SS304 including all accessories METRE 40 3629.00 145160.00

Supply, Installation, Testing and Commisiong of HIGH FLOW

MR 27 SINGLE LEVER CONCEALED DIVERTOR FOR BATH & SHOWER EACH 1 18938.00 18938.00

Supply, Installation, Testing and Commisiong of SPOUT FOR

BUILT IN BATH/SHOWER MIXER

Supply, Installation, Testing and Commisiong of OVERHEAD

SHOWER 350x350MM ROUND EDGE SQUARE HEAD SINGLE

FLOW (BODY & FACE PLATE STAINLESS STEEL WITH

CHROME PLATED) WITH RUBIT CLEANING SYSTEM

Supply, Installation, Testing and Commissioning of 15 litre geyser

Supply, Installation, Testing and Commisiong of SOAP DISH

Supply, Installation, Testing and Commisiong of TUMBLER

Supply, Installation, Testing and Commisiong of TOWEL RACK

MR 33 600MM LONG WITH LOWER HANGER EACH 1 15653.00 15653.00

Supply, Installation, Testing and Commisiong of ROBE HOOK

Supply, Installation, Testing and Commisiong of TOILET ROLL

HOLDER WITH COVER

Supply, Installation, Testing and Commisiong of TOWEL HOLDER

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as

per IS: 13983 with C.I. brackets and stainless steel plug 40 mm,

including painting of fittings and brackets, cutting and making good

the walls wherever required :

17.10.1 Kitchen Sink with Drain Board

Supply, Installation, Testing and Commisiong of single lever sink

mixer (table mounted) with extractable hand shower dual flow

MR 38 complete with 1.2 m long tube with 450 mm long braided hoses EACH 1 8131.00 8131.00

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT DSR Amount after TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT DSR Amount after TOTAL AMOUNT

GST Multiplication

S NO UNIT QUANTITY RATE factor@ 1.0633

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC conduit,

A.1 with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm.

FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point (without independent

switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface

A.2 / recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper

conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core

A.3 1.12 cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC Metre 19490 334.00 6509660.00 6921721.48

insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box

excluding modular plate as required.

Supplying and fixing following size/module, GI box along with Modular base & cover plate on

existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC

insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit

1.14.1 asXrequired

B.1 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and making end termination with brass compression gland and aluminium lugs for

9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1

KV grade as required.

1 Digitally signed by AMIT

Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium

Conductor Cables :

MR Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor

armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively &

(b) 3.5 C x 95 Sqmm XLPE cable RM 75 864.00 64800.00

(c ) 3.5 C x 70 Sqmm XLPE cable RM 75 680.00 51000.00

(d) 3.5 C x 50 Sqmm XLPE cable RM 75 510.00 38250.00

(e) 3.5 C x 35 Sqmm XLPE cable RM 75 378.00 28350.00

Supply of following sizes of copper cables -PVC sheathed PVC/XLPE insulated Copper

C.3 MR conductor armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1

respectively & ISI marked.

(a) 4 C x 16 Sqmm XLPE copper cable RM 300 1446.00 433800.00

(b) 4 C x 25 Sqmm XLPE copper cable RM 75 2253.00 168975.00

(c ) 3.5 C x 35 Sqmm XLPE copper cable RM 25 2686.00 67150.00

(d) 3.5 C x 50 Sqmm XLPE copper cable RM 25 3224.00 80600.00

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit

2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

2.4 distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral

bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as

required. (But without MCB/ RCCB/ Isolator)

MR 12 way (4 + 36), Double door Each 8 9081.00 72648.00

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,

2.14 residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in

the existing MCB DB complete with connections, testing and commissioning etc. as required.

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

Supply, installation, testing & Commissioning of 1 module 16A SWITCH SP 1 way for floor box.

E.2 MR Supply, installation, testing & Commissioning of 2 module 16 A Socket for floor box box. Set 4 577.00 2308.00

Supply, installation, testing & Commissioning of Specific Backbox for Carpet for Floor Box

E.3 MR along with LID and TRIM for tiles/ marble 15 to 20mm thickness material for headband and Set 2 12106.00 24212.00

single cable outlet/ glavanized steel, paint RAL 7031 for floor box .

2 Digitally signed by AMIT

Supply, installation, testing & Commissioning of Specific Backbox for Wooden Flooring for

E.4 MR Floor Box along with LID and TRIM for tiles/ marble 15 to 20mm thickness material for Set 2 6803.00 13606.00

headband and single cable outlet/ glavanized steel, paint RAL 7031 for floor box.

Supply, installation, testing & Commissioning of flat support plate 8 module for integration of

Mechanism for Floor Box

Supply, installation, testing & Commissioning of waved support plates for 4 module (2x2)

modules for Floor Box

Supplying and fixing following modular switch / socket on the existing modular plate & switch

E.7 box including connections but excluding modular plate etc. as required.

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with

MR required suitable number of GI couplers for joining raceways and fixing GI brackets and all

accessories complete in all respect as per the directions of engineer in charge

(a) 300mmx38mm(GI) - 3 compartment Mtr 500 3603.00 1801500.00

E.9 (b) 225mmx38mm(GI) - 3 compartment Mtr 200 2960.00 592000.00

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables at

the intersection of raceways supplied completely with base and cover plates, height adjustable

junction box 65- 90 mm including all accessories ss plate of 3mm thick complete in all respect

E.10 as per the directions of engineer in charge

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

E.11 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the exisitng Meter 500 47.00 23500.00 24987.55

surface/recessed steel/ PVC conduit as required

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in

1.21 surface/ recess including cutting the wall and making good the same incase of recessed

conduit as required

Supplying and Installation of following size perforated of painting with powder coating M.S.

cable trays of perforation of not more than 17.5% in convinient sections, joined with connectors

E.13 suspended from the cieling with MS suspenders including bolts and nuts painting suspenders

etc as required

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 100 1137.00 113700.00 120897.21

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and

F.1 5.6 providing masonry enclosure with cover plate having locking arrangement and watering pipe of SET 10 13838.00 138380.00 147139.45

2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

F.4 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. MTR 1000 70.00 70000.00 74431.00

G PANEL BOARDS

3 Digitally signed by AMIT

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick

CRCA sheet, dust and vermin proof, outdoor type double door with canopy, TPN Panels with

hinged lockable doors fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4

wire 50Hz AC supply with rear access for cable alley and with segregated bus-bar chamber

with tinned aluminium bus bar and including supplying and fixing following switchgears, meters

and accessories, inter-connections, bonding to earth, powder coated painting and marking as

specified. Switch boards complete as per schematic diagram:

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

detailed in the Specifications

Colour: Gray Powder Coated, as per approved sample.

1 nos, 250 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking

capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 320 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section,

size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 63 Amps, TPN, MCB - 6 Nos.

(b) 40 Amps, TPN, MCB - 4 nos

Panel complete as above Each 1 250000.00 250000.00

G.2 MR Floor Panels

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick

CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors

fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with

rear access for cable alley and with segregated bus-bar chamber with tinned aluminium bus

bar and including supplying and fixing following switchgears, meters and accessories, inter-

connections, bonding to earth, powder coated painting and marking as specified. Switch

boards complete as per schematic diagram:

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

detailed in the Specifications

Colour: Gray Powder Coated, as per approved sample.

1 nos, 250 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking

capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 320 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section,

size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 63 Amps, TPN, MCB - 4 Nos.

(b) 40 Amps, TPN, MCB - 10 nos

Panel complete as above Each 2 250000.00 500000.00

G.3 MR UPS Output Panel

4 Digitally signed by AMIT

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick

CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors

fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with

rear access for cable alley and with segregated bus-bar chamber with tinned aluminium bus

bar and including supplying and fixing following switchgears, meters and accessories, inter-

connections, bonding to earth, powder coated painting and marking as specified. Switch

boards complete as per schematic diagram:

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

detailed in the Specifications

Colour: Gray Powder Coated, as per approved sample.

One (1) nos, 200 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault

breaking capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 320 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section,

size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 63 Amps, TPN, MCB - 4 nos

(b ) 40 Amps, TPN MCB - 10 nos

Panel complete as above Each 1 314297.00 314297.00

Supply, Installation, Testing and Commissiong of Hot-swappable Modular Type 75 KVA/KW (3

no 25 kva module + 1 no of 25 kva redundant module)True Online Double Conversion UPS

3Phase Input - 3Phase Output UPS having Decantralized Architecture. Module size should be

25 kVA with multi controller. IGBT Based Rectifier and IGBT Based Inverter Batteries:12 V,

SMF Amararaja/Exide with minimum VAH capacity of 60000 suitable for 30 minutes backup

MR with each ups Along with Accessories Rack, Interlinks, SFU, DC Cable Upto 5 Meters complete

in all respect as per the directions of the engineer in charge. UPS should have availability of

Input /Output isolator, Inbuilt manual bypass along with phase sequence corrector. UPS

Efficiency shall not be less than 95%.

Note: Modular Size may be change as per the OEM in Make list but total capacity shall be

same or higher then the tender requirements.

Total of Electrical items 13293733.87 10328011.00

5 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - HVAC WORKS

TOTAL DSR Amount after GST

AMOUNT Multiplication factor@ TOTAL AMOUNT

AMOUNT Multiplication factor@ TOTAL AMOUNT

S No DSR 2025 DESCRIPTION UNIT QUANTITY RATE 1.0633

DSR (INR) NON-DSR (INR)

DSR 2025 - Supply, Installation, Testing & Commissioning of Modular type Variable Refrigerant Flow/Variable per HP 20 21659.00 433180.00

7.3 Refrigerant Volume air cooled Outdoor units suitable for cooling/heating having 100% hermetically

sealed inverter type twin Rotary/Scroll Compressor(s),minimum two compressors (with individual

separate PCB) for above 14HP modules, microprocessor based

Controller, top discharge type condensing unit(s), with R-410-A Refrigerant or equivalent, vibration

Isolators with suitable foundation etc. complete as required. To have better efficiency condenser

fan shall be capable to operate at different speed with respect to load. The unit shall deliver the

rated capacity and in confirmation as per IS 18728:2024 and CPWD Specifications and work even

1 at 50°C ambient temperature without tripping. The system shall be able to deliver 100% of the

rated capacity upto 39 Degree Celcius.The unit shall be suitable to work on 400V +/- 10%, 3

Phase, 50Hz AC power supply and BMS compatible. The unit shall be filled with first charge of the

refrigerant and ready for use as required. The condenser should be coated with a hydrophilic film

to prevent water accumulation on the surface of the heat exchanger, enhance water dispersion,

and reduce the risk of degradation, thereby improving overall performance and durability. The

Indian Seasonal Energy Efficiency Ratio (ISEER) of the unit shall be as per Energy Conservation

and Sustainable Building Code (ECSBC) 2024 as below and complete as per CPWD

specification, connections, inter connections etc. as required. (For capacity <40 kWr ISEER 7.4,

2 DSR 2025 - INDOOR UNIT

7.4 Supply, Installation, Testing and Commissioning of following minimum

capacity 4 way Cassette Type Indoor ceiling mounted unit equipped with

synthetic washable media pre-filter, fan section with low noise fan / dynamically balanced blower,

multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet,

drain pump, grill, necessary supports, vibration Isolation, Corded remote control etc., suitable for

operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The Indoor units

must shut down upon receiving a singal from the

BMS System/Fire Signals. The system shall be capable to adjust air flow as

per room requirement in auto mode. The cooling capacity of indoor unit will be at air inlet

conditions of 27 Degree C DB and 19 Degree C WB

temperature. (Make will be same as of Outdoor)

4-Way Cassette type

HI - WALLSPLIT SYSTEMS

DSR 2025 - Supply , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners

8.2 complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant

piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to

ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R407 Green

Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high

voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air

circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver

3 100% of the rated capacity upto 42 Degree Celsius. Min 5 year Original Equipment Manufacturer

(OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable

IS 694 or IS 9968 temperature sensing control IS /International Electro technical Commission

(IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and

motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system

shall be able to operate up to 50 0C (out door ambient temperature).

3.1 8.2.3 1.5 TR with 5 Star BEE Rating Each 4 42055.00 168220.00

4.0 MR Corded Remote controls Nos 2 4733 9466.00

5 MR Communication cable (1.5 sqmm X 2 Core) 1 RMT 20 385 7700.00

Digitally signed by AMIT

Lifting, Shifting, Supply, Installation, Testing & Commissioning of Interconnecting "Y" & "T" Joints

i.e. Refnet Joints/ Header with Insulation for refrigearnt piping

Refrigerant Piping

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of

following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system,

complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including

6 accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell

elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for

Suction and Liquid lines, all accessories as per

specifications etc. as required :

6.1 7.14.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm m 100 487.0 48700.00

6.2 7.14.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm m 200 615.0 123000.00

6.3 7.14.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm m 250 739.0 184750.00

CABLE TRAY FOR REFRIGERANT PIPING

Supplying and installing of following size of perforated hot dip galvanized G.I cable tray

with perforations not more than 17.5%, in convenient sections, joined with connectors,

7 MR suspended from ceiling with G.I suspenders including bolts and nuts, etc. for carrying

refrigerant pipe in outdoor application as required.

7.1 450 mm width x 62.5 mm depth x 2 mm thickness Rmt 10 1,325 13250.00

7.2 225mm width x 50 mm depth x 1.6 mm thickness Rmt 45 962 43290.00

CONDENSATE DRAIN UPVC PIPE

Supply, installation, testing and commissioning of uPVC Pipe ,complete with fittings,

8 supports,U trap arrangement,Clean Plug with 6mm nitrile insulation and accessories as

per specifications, drawings.

DSR - 2019 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

1.14 insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as

Total HVAC-VRV WORKS 1240470.00 604464.78 285780.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - HVAC WORKS

DSR Amount after

DSR (E & M- GST Multiplication

S NO DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT

2022)/ MR factor@ 1.0633 AMOUNT

VAV BOX (WITH INTEGRAL SOUND ATTENUATOR)

MR Supplying, Installing, testing and commissioning of Pressure independent VAV for climate control with

multi-hop wireless mesh module, made out of heavy gauge extruded alluminium of 1.5 mm nominal

thickness consists of low leakage extruded alluminium volume control damper with additional acoustic

cladding; Rapid Average Pitot tube; Air Flow Straightner (Honey-Comb patterned); slab/duct temperature

1.0 sensor or optional thumbwheel setpoint adjustment. Dynamic factory calibrated and adjustable flow range

of different capacities.

Note : Shall be ordered in site specific duct size without transition pieces and no reduction in area for

airflow measurement. VAV's shall be certified in accordance with AMCA 611/511 for airflow measurement

and leakage (Class I).

1.VAVs shall be pressure independent type & low velocity type

2.VAV Boxes shall be slow reacting type capable of delivering variable air volume type by the action of

opposed blade volume control damper

3.VAV boxes shall be supplied with end flanges for attachment to flanged duct ends and shall be complete

with all internal Acoustic treatment.

4.The casing shall be double skin type of Galvanized sheet steel construction with a completely sealed,

easily removable. The access shall be provided per OEM and suitable to site.

5.VAV shall be electronically controlled networkable controller type complete with low leakage damper,

actuator , Microprocessor unit , wall/ ceiling mounted temperature sensor with ON/OFF Switch , control

transformer , unit hander brackets etc.

6.VAV Boxes shall also be able to reset any air flow between zero and the maximum air quantity that the

boxes can handle without changing orifices or other parts, but the boxes shall be factory set at 10% of the

maximum flow as minimum flow.

7.The noise level from the VAV boxes shall not exceed 35 dbA

8.The temperature sensor and the entire control mechanism shall be fully compatible with BMS System.

Datas like temperatures, set points , damper position shall be monitored through BMS system

9.Integrators for the below VAVs to connect with the BMS system to read and modify the parameters.

Integrator should release open protocol BACnet / MODBUS to integrate with third party BMS System. The

integrator shall be approved through engineer in charge / consultant before procuring the VAVs.

11.Power wiring from the Socket to VAVs

Supply, installation, testing and commissioning of Variable Frequency Drive (VFD) 380-400 VAC, IP-

MR 54 Chassis, RFI class A1 (C2), No brake chopper.

a VFD upto 35 HP or as directed by the engineer in charge Nos. 2 180000.00 360000.00

DUCT PRESSURE SENSORS

Supply, Installation and Testing of pressure sensors to be installed in supply air ducts. Quoted price

3.0 MR shall be inclusive of necessary conduting, copper control cabling from the sensors to the respective VFDs Nos. 8 17500.00 140000.00

as per "Approved Shop Drawings".

Digitally signed by AMIT

Supply, Installation, Testing & Commissioning of Silent type circular /rectangular inline fans for exhaust air

complete with sheet metal casing, 25mm thick acoustic insulation, direct driven centrifugal fan, motor with

proper protection and inspection door. Fan shall be suitable for operation on 220+6 % volts, 50 Hz,1

phase AC power supply. Flanges to be provided on both sides to facilitate duct connections. Fan shall be

4.0 installed as shown in the drawings and will be of following characteristics:

All single phase inline fans shall be provided with factory fitted speed regulators. All Fans Should be

complete with Plug Top & necessary power cable.Fans shall have low noise level in rage of 35-40dBA

@3m and shall be suitable for indoor installations.

a 200 CFM S P of 13-14 for Toilet Nos. 2 6449.00 12898.00

b 500 CFM S P of 13-14 for Kitchen Nos. 1 9500.00 9500.00

5.0 Tube Axial Fan

Supply Installation, testing and commissioning of supply air Tube Axial flow fan of following capacity with

GSS casing and aluminium alloy impellers with high efficiency aero-foil sections, blades, the impeller

directly driven by TEFC induction motor suitable for 3 Phase 50 Hz 415 V ± 10 %, complete as required.

a MR This cost shall include the cost for suitable panel, DOL starter, breakers etc compete in all respect as per

the directions of engineer in charge.

9000 cfm at 15 mm static presuure for fresh air/exhaust air With Class "H" insulation. NOS 6 143910.00 863460.00

DSR 2019 Fire damper

Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/main branch and return air

path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring

return so as to close the damper in the event of power failure automatically and open the same in case of

6.0 16.20 power being restored. The spring return action shall be inbuilt mechanism and not externally mounted.

The damper shall also be closed in the event of fire signal complete as required and as per specifications.

(Fire damper shall ve suitable for 120 minutes fore rating as per NBC norms)

GI Gravity Louver

7.0 MR Supply, installation, testing and commissioning of GI Gravity Louver complete with neoperene rubber

gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.

8.0 VOLUME CONTROL DAMPER

Supply, Installation and Testing of GI box type volume control dampers as per the specifications and shop

a drawings. SQM 15 5900.00 88500.00

- For Rectangular Ducts

Supply, Installation, Testing and Commisioning of powder coated GI sheet metal factory fabricated flat

oval ducting with fittings and gripple wire supports. The factor of gripple support to suit the duct weight

with necessary anchor fastners and hook arrangements with suitable thickness etc., confirming to

SMACNA standards. Duct should be fabricated by using CNC machines including neccesary civil works

9.0 MR as per site condition. The joints shall be seamless and ducts joining shall be done using rivets only. The

ducts shall be powder coated with RAL color as per architect approval. The complete ducting cost shall be

including 9 mm thick nitrile rubber thermal with insulation internally. The insulation used for factory lining

shall be of self adhesive type.

a MR Thickness 0.63 mm sheet SQM 800 1721.00 1376800.00

b MR Thickness 0.80 mm sheet SQM 500 2023.00 1011500.00

c MR Thickness 1.00 mm sheet SQM 200 2340.00 468000.00

d MR Thickness 1.25 mm sheet SQM 100 2900.00 290000.00

DSR 2019 Diffusers & Grills

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control

dampers as per specifications.

Digitally signed by AMIT

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume

control dampers complete as required

Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium

volume control dampers with anti smudge ring & removable core.

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume

control dampers with anti smudge ring & removable core.

Supply, Installation, Testing of 125mm deep antivibration flexible joints at the outlet of air handling

14.0 MR units/ductable split units//inline fans. Flexible connections shall be constructed using imported fire RM 100 1440.00 144000.00

retardant fabric with extruded aluminium frame/flange on both sides of approved make.

Supply, Installation, Testing and Balancing of linear slot diffusers as per the approved shop drawings and

specifications. Each slot shall be 25mm wide. The diffuser face shall be a one piece extrusion so there are

no visible joints. Slot diffusers shall be complete with end caps either as end plates or end angles or

integral part, air control blades etc. Slot diffuser have a variable neck length and the diffuser face could be

15.0 MR optionally be fitted to the plenum box on site. Diffuser shall have provision to access collar dampers for air

All Return air diffusers in false ceiling to be properly supported from real slab using chains or gripple wires.

3 slot/2slot, powder coated extruded aluminium diffusers of approved colour & shade. SQM 10 12500.00 125000.00

Supply, Installation and Testing of Bird Screens with GI wire mesh to be installed at the suction of fresh

16.0 MR air/discharge of Exhaust air as per the specifications and shop drawings. Sample of bird screen to be got SQM 10 5436.00 54360.00

approved from consultants and Clients prior to procurement.

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile

rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints

17.0 shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as

per specifications and as required.

13mm thick insulation oxide acetate foam laminated with aluminium foil for supply air duct SQM 650 723.00 469950.00

9 mm thick insulation oxide acetate foam laminated with aluminium foil for Return air duct SQM 75 645.00 48375.00

Supply and installation of cross linked open cell acco isolate acoustic insulation for AHU room having 22625.00

density of 30 to 55 Kg/ M³ ,having K value 0.029 W/m ° K at 40°C Deg temp and temp range of -70°C to

+100°C and fire rating Class O as per BS 476 Part 6 from CBRI,Roorkee as per the approved

specifications. Smoke & Toxicity index of material shall be passed as per IMO MSC 307 ( 88 ) 2010

Anexx 1 Pt 2.• Material shall be CFC/ HCFC free as per US EPA 5021 A(2014 ). 25mm thickacco isolate

acoustic open cell insulation

The Active Air Purification system should consist of Supply, Installation, Testing and commissioning of

Bipolar Ionisation System. The Bipolar Ionisation System shall be of Needle Point Model (Needle Point)

should have Nitinol (nickel titanium) Needles and Carbon Fibre Brush Model, System should produce

positive and negative ions for creating a Bio Climate rich in ions and hence neutralising harmful pollutants

including pathogens, Volatile Organic Compounds and Particulate Matter within the occupied space.The

19.0 ionizer shall be installed at the fan inlet of fan coil units, VRF cassettes, ductless splits, AHU and Ductable

HVAC System. The Unit should accept 12-24 VAC/DC. Product should have UL 867 and UL 2998

certification (for zero ozone emission), UL 2043 (for Fire and Smoke Safety), ISO 16000, CSA C22.2# 187

on atleast any one product. The OEM shall have Efficacy test report on SARS-CoV-2 OMICRON

VARIANT and from any Internationally/Nationally recognised Laboratory.

a AHU (upto 6000Cfm ) Nos 0 81420.00 0.00

b AHU (upto 2000Cfm ) Nos 0 40710.00 0.00

Digitally signed by AMIT

Smart Indoor Air quality monitor to measure Air quality parameters including AQI, PM1, PM2.5, PM10,

CO2, Humidity and Temperature. In addition to the mentioned sensors of the base device, you can

customize it to measure more parameters by adding extra sensors. This monitor should be a 3-tier

architecture including sensor Hardware, secure cloud infrastructure, monitoring apps including dashboard,

android/IOS apps, where ever requires. Dashboard should be customisable and IOT (Internet of things)

enabled with view and management for all of your locations on one dashboard so that you can easily

identify and address any air quality issues. Sensors should be soft calibratable. The System should be

capable of providing periodic Preventive maintenance for automated after sales support service in form of

notification/ alerts and user interaction through dashboard application.

Air Quality Monitor Nos 0 75796.00 0.00

Supply, installation testing and commissioning of Router / Supervisory Controller which will manage the

VAV information and communicates on BACnet®/ LONWORKS® protocol to monitor and Control the

VAVs from BMS software on PC in accordance with the approved shop drawings and technical

specifications. Connecting the final daisy loop from all VAV to Supervisory Controller shall be part of the

21.0 MR scope. The communication between Supervisory controller and BMS software in PC should be on IP. Cost Nos 1 218928.00 218928.00

include powder coated Panel for Supervisory Controller of required size with 24 Volts provision which

includes power cable, plug, transformer and with all necessary accessories for mounting on wall in

accordance with the approved shop drawings and technical specifications.

Supply, Laying, Termination of ISI Certified 2 Core 1.0 sq.mm ATSC, FRLS,PVC insulated, Unarmored,

Tinned Copper, twisted, shielded, PE insulated, VAV Communication Cable with proper ferrules, lugs

and other necessary accessories. The spec shall meet the system manufacturer specifications.

Supply, Laying, Termination of ISI Certified 4 Core 1.0 sq.mm ATSC, FRLS ,PVC insulated, Unarmored,

Tinned Copper, twisted, shielded, PE insulated, VAV Communication Cable with proper ferrules, lugs

and other necessary accessories. The spec shall meet the system manufacturer specifications.

Supply & Laying of ISI Certified 1" dia PVC Conduit with bends, collar, saddles, saddle base and other

accessories for Signal Cable / DDC Communication Cable

LT CABLE AND TERMINATION

Supplying, unloading, storing , laying, testing and commissioning of following sizes of 1.1 kV grade XLPE

insulated, FRLS (Heavy duty) Aluminium/copper conductor armoured/unarmored cables suitable for

working voltage upto and including 1100 Volts, laid and tied on existing overhead cable trays; or buried

underground or laid and tied over MS supports in masonry trenches including providing MS supports and

25.0 MR clamps for fixing to supports in an approved manner, providing fire retardant sealant where required

complete as required and as per specifications. Circuit identification tag should be attached with the

concerned cable alongwith the test report of following sizes of cable to be submitted by the contractor at

the time of delivery of material at site. (Cable length may increse as per existing panel location).

26.0 9.1 Supplying and making end termination with brass compression gland and aluminium lugs for following

size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Supplying following 1.1kV grade, XLPE insulated, FRLS type control cables,suitable for 415V, 50Hz, AC

system, with inner and outer PVC sheath, outer sheath provided with FRLS insulation and with all

components as mentioned in BOQ, specifications and schedule, complete as required.

Digitally signed by AMIT

27.1 MR 2C X 1.5 sqmm copper conductor Metre 39 201 7839.00

27.2 MR 2C X 2.5 sqmm copper conductor Metre 85 253 21505.00

Supplying and making end termination with single compression brass gland and lugs for following size of

1.1kV grade, XLPE insulated, FRLS type control cables,suitable for 415V, 50Hz, AC system, with inner

and outer PVC sheath, outer sheath provided with FRLS insulation and with all components as mentioned

in BOQ, specifications and schedule, complete as required. The cost shall include the cost of crimping

and all tools and accessories required to complete the job in full respect.

Note : Al lugs shall be used for Al cable and cu lugs shall be used for copper cable.

28.1 MR 2C X 1.5 sqmm copper conductor Each 5 182 910.00

28.2 MR 2C X 2.5 sqmm copper conductor Each 5 199 995.00

CABLE MANAGEMENT

SOCKET OUTLET POINT WIRING

Wiring including termination for 6 amp socket outlet point with 3 x 2.5 sq. mm PVC insulated FRLS copper

conductor wires in concealed/exposed 1.6 mm thick in MS conduits including providing 6 amp switch,3

MR pin 6A shuttered socket,anodised MS box for housing switches sockets, approved White Polycarbonate Nos 14 19040.00

29 modular cover plate and earthing. 1360

Wiring including termination for 16 amp power socket outlet points with 3 x 4 sq. mm PVC insulated

FRLS copper conductor wires for the 16 amp socket outlet with 3 x 4 sq. mm PVC insulated FRLS

copper conductor wires for the second outlet of 650/1100 Volts grade in concealed/exposed 1.6 mm thick

in MS conduits as called for including providing 16 amp flush type combined 6 pin shuttered sockets and

switches, anodised MS outlet boxes for 16 A 6 pin sockets and switches,approved White Polycarbonate

30 modular cover plate and earthing.

TOTAL HVAC WORK AMOUNT 1,289,281.02 6,876,280.00

Digitally signed by AMIT

S No Item Description Product Image Unit Quantity Rate DSR Amount NDSR Amount

Supply, Installation, Testing and Commissioning of Recess type 6W non-dimmable LED downlighter neutral

white (4000 K) with SMD based LED having pressure die cast aluminium hang body having high efficiency

diffuser with more than 85% transmittance with rated life of L-70 @50000 hrs having system lumen output

better than 750 lumens,with efficacy better than 100 lumen/ watt with CRI>80 & Driver efficiency> 90% (Driver

complaince IEC 62384,IEC 61547,IEC 61347-2-13,EMICISPR15, THD<10%,PF>0.95 ) etc. with inbuilt

protection against short circuit,Miswiring,over voltage and surge protection upto 3 KV including making suitable

arrangement for fixing complete as required complete as reqd.

Supply, Installation, Testing and Commissioning of Recess type 15W non-dimmable LED downlighter neutral

white (4000 K) with SMD based LED having pressure die cast aluminium hang body having high efficiency

diffuser with more than 85% transmittance with rated life of L-70 @50000 hrs having system lumen output

better than 1875 lumens,with efficacy better than 100 lumen/ watt with CRI>80 & Driver efficiency> 90%

(Driver complaince IEC 62384,IEC 61547,IEC 61347-2-13,EMICISPR15, THD<10%,PF>0.95 ) etc. with inbuilt

protection against short circuit,Miswiring,over voltage and surge protection upto 3 KV including making suitable

arrangement for fixing complete as required complete as reqd.

Supply, Installation, Testing and Commissioning of Surface type 12W non-dimmable LED clyndical downlighter

neutral white (4000 K) with LED having pressure die cast aluminium hang body having high efficiency diffuser

with more than 85% transmittance with rated life of L-70 @50000 hrs having system lumen output better than

1080 lumens,with efficacy better than 90 lumen/ watt with CRI>80 & Driver efficiency> 90% (Driver complaince

IEC 62384,IEC 61547,IEC 61347-2-13,EMICISPR15, THD<10%,PF>0.95 ) etc. with inbuilt protection against

3 short circuit,Miswiring,over voltage and surge protection upto 3 KV including making suitable arrangement for Nos 80 5561.00 444,880.00

fixing complete as required complete as reqd.

Supply, Installation, Testing and Commissioning of non-dimmable 35mm wide Sleek Suspended 30W LED

linear light(1200mm) Linear ultra modular fixture made up of extruded aluminium housing and multi LED anti

glare system having system lumen >=3300 with luminaire efficacy 110LPW , CRI >80, UGR<19 CCT 4000K.

The luminaire rated life (L70) 50000 hours with inbuilt protection against short circuit,Miswiring,over voltage

and surge protection upto 3 KV PF.0.95 and THD<10% (Driver complaince IEC 62384,IEC

4 61547,IEC 61347-2-13)including making suitable arrangement for fixing including connection with 3 x 1.5 Nos 50 17110.00 855,500.00

sq.mm. PVC insulated FRLS PVC sheathed copper conductor etc as required.

Supply, Installation, Testing and Commissioning of non-dimmable Suspended 30W LED linear light(1200mm)

Linear wih PBC modules & modular fixture for making continous linear arrangement including cascading kit

etc made up of extruded aluminium housing having high efficiency diffuser with more than 85% transmittance,

system lumen >3000 with luminaire efficacy 100LPW , CRI >80 ,UGR<22 CCT 4000K. The luminaire rated life

(L70) 50000 hours with inbuilt protection against short circuit,Miswiring,over voltage and surge protection upto

5 3 KV PF.0.95 and THD<10% (Driver complaince IEC 62384,IEC 61547,IEC 61347-2-13)including making MTR. 200 8308.00 1,661,600.00

suitable arrangement for fixing including connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed

copper conductor etc as required.

1 Digitally signed by AMIT

Supply, Installation, Testing and Commissioning of recess type 36W non-dimmable LED panel light of 295 x

1195 mm size/ 595mm x 595mm with aesthetically designed CRCA housing & injection molded PC component

diffuser with efficacy better than 100 Lumen/watt (minimum total lumen delivered package 3600), with

6 CCT=4000K, CRI>80, PF>0.95,THD<10% & with Driver having efficiency >85% .Service life of 50,000 hrs @ Nos 180 5310.00 955,800.00

L 70 etc complete as required matching ceiling type as per approvd design.

Supply, Installation, Testing and Commissioning of 20W/M LED flexible strip made of 240 LED / meter and

Flexible FR4 PCB with copper contacts. CCT = 4000K, CRI >80.Drier shoulb 12V DC, 10Amp contant voltage

Supply, Installation, Testing and Commissioning of 150W non-dimmable Constant voltage power supply with

24VDC output and 220VAC input, PF> 0.95, THD < 10%, 6KV Surge protection, Sorchit Circuit Protection,

Open Circuit protection, over load protection including connection with 3 x 1.5 sq.mm. PVC insulated FRLS

PVC sheathed copper conductor etc as required.

Supply, Installation, Testing and Commissioning of STRETCHED FABRIC CEILING: Supply & installation of

fabric false ceiling / wall formed out with TRANSLUCENT CLIPSO Plain fabric coverings made out of

polyester knitted fabric coated with Polyurethane (PU). The TRANSLUCENT Plain Clipso fabric width of 2m,

3m, 4.1m &5.1m with weight of 200gm/m2, thickness of 0, 3 mm. The appearance of fabric is matt, smooth

and uniform with blanq color and light transmission of 50%. The tear strength of fabric should be accordance

to CH: 4,5daN; TR: 6,5 daN. The fire rating should be accordance to B-S1, d0. The fabric should be

humidity resistant and free of carcinogenic substances(CMR) or volatile organic Compounds (VOC’s). At

labeling in accordance with the French decree no. 2011- 321, Oeko-Tex standard100 certified. Fabric

should be installed with approved manufacturer guidelines. It comes with 10- year manufacturer

guarantee. The installation of TRANSLUCENT Printed fabric should be dry installation & done at room

temperature using CLIPSO PVC, ABS Grippers. Clipso ceiling base to be made of MS or Wooden frame

finishing to a flush finish of tapered and square edges in desired design as per architect specification.Supply of

LED Lights behind the Fabric Wall/ False ceiling in modules/ PCB with recommended wattage as per

manufacturer's standards to give an effect of ambient lighting. LED make MLS/ Bridgelux / Osram- SMD 2835,

LED spacing / Pitch should be atleast 73 -80mm with beam angle of 170 degree, Colour temperature shoud

be as per design intent 3000K/4000K/6000K. Wattage of 8- 10W/mtr. LED modules/ PCB should be

positioned properly to provide an even light flow, casting noshadows or dark spots. Non-Dimmable Driver Cost

Supply, Installation, Testing and Commissioning of recessed trimless track with 4 wire / conductors suitable for

mounting of non-dimmable lights, made of extruded aluminium powder coated in black colour. It should come

with suitable accesries such as mounting clips, end caps etc and front cover.

Supply, Installation, Testing and Commissioning of non-dimmable track mounted 18W LED linear spot light

(22mm wide) which is installed magnetically to the track, Linear ultra modular fixture made up of extruded

aluminium housing and multi LED anti glare system having system lumen >2340 with luminaire efficacy

100LPW , CRI >80, CCT 4000K. The luminaire rated life (L70) 50000 hours with inbuilt protection against short

circuit,Miswiring,over voltage and DC-DC 48VDC input Driver (Driver complaince IEC 62384,IEC

2 Digitally signed by AMIT

Supply, Installation, Testing and Commissioning of non-dimmable Suspended 20w/mtr LED Curvi linear light

with PBC module system & modular fixture for making continous linear arrangement including cascading kit

etc made up of extruded aluminium housing having high efficiency diffuser with more than 85% transmittance,

system lumen >3000 with luminaire efficacy 100LPW , CRI >80 ,UGR<22 CCT 4000K. The luminaire rated life

(L70) 50000 hours with inbuilt protection against short circuit,Miswiring,over voltage and surge protection upto

12 3 KV PF.0.95 and THD<10% (Driver complaince IEC 62384,IEC 61547,IEC 61347-2-13)including making MTR. 25 19523.10 488,077.50

suitable arrangement for fixing including connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed

copper conductor etc as required.

Supply, Installation, Testing and Commissioning of Recessed / Surface mountedPIR based Human Body

Infrared Detector is a high-performance motion sensor designed for seamless integration into residential,

commercial, and industrial spaces. Operating on AC220V, it features a detection range of 6–8 meters with a

120° angle, making it ideal for efficient lighting control or security systems. The embedded design ensures a

sleek installation in walls or ceilings, maintaining aesthetic appeal while providing reliable functionality. This

device uses advanced infrared technology to detect human movement with high sensitivity and adjustable

timing settings ranging from 10 seconds to 7 minutes. Its compact size ensures easy installation, while its

durable ABS material offers long-term reliability. The sensor supports a maximum load 200W LED or

fluorescent lights, making it suitable for various applications.

3 Digitally signed by AMIT

Sr. No. Item Specification Qty Unit Price Amount Photo

CHAIRMAN OFFICE

Providing and Placing Main TAble of Size 3000x2550x740.MAIN WORKTOP Size 3000x1050x740, ERU 1500x600x610mm- Main 1 425500 425500

worktop - Made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All

edges are edge banded with matching 1mm thick veneer lipping.LEATHER PAD:Made of 18mm Thick (±1) MDF with Leatherette

wrapped around top surface. This leather pad is fixed to main top panel.DRAWER UNIT:Top panel and drawer unit modesty panel

is made of 43mm Thick (±1) combination ofMDF and particle board with top veneer face coated with clear lacquer. All thickness

edges are edge banded with matching lipping.Remaining construction is of 18mm Pre-laminated twin board (PLT) of E1-P2 grade

and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Bottom panel of drawer is

9mm thick particle board with leatherette on top surface.Drawer unit is provided with soft closing channels for smooth opening and

closing.Drawer unit is secured with side central lock.OPEN STORAGE UNIT:Top panel and open storage unit modesty panel is

made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All thickness

edges are edge banded with matching lipping.Remaining construction is of 18mm Pre-laminated twin board (PLT) of E1-P2 grade

1 MD Main table

and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.MODESTY:Made of 18mm

Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with

matching 2 mm thick PVC lipping. Modesty is fitted with aluminum trims.UNDERSTRUCTURE:Made of 18mm Thick Pre-

laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm

thick PVC lipping. Door is fixed with soft closing hinges and handle is provided for ease of opening.Also lock is provided on side

panel for security.ACCESS FLAP WITH POWER BOX:Soft closing access flap with power box contains 3 Universal Sockets, 2

USB power points, 1 HDMI connection, 1 inbuilt misc. cable grommet and CAT 3 and CAT 6connections.

Providing and placing Back unit of size 3000 mm(L)x470mm(D)x2325mm(H).CONSTRUCTION AND MATERIAL: Made from 1 138961 138961

combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA for 600W and 0.8mm CRCA for

1200W), Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). Shelves are 12 bend

panel made of 0.7mm Thick CRCA (D Grade, IS-513). 4 nos of shelves for 1950H and 5 nos of shelves for 2325H back unit.

Storage body is powder coated with Epoxy Polyester to the thickness of 50 microns (+/-10 micron). Finish VENEER DOOR: Made

of 12mm Thick (±1) MDF with 3.5mm veneer both side and face coated with clear lacquer. All edges are edge banded with

2 MD Back unit

matching 1mm thick veneer lipping. Door is provided with soft closing hinge. Handle is also provided for ease of opening. Storage

is secured with 3 way cam lock.GLASS DOOR: Made from the combination of aluminium alloy (63400) extrusion and 4mm clear

toughened glass. Aluminium extrusion of glass doors are powder coated with Epoxy Polyester to the thickness of 50 microns (+/-

10 micron). Handle is provided for ease of opening. RH Glass Door is provided with 3 way cam lock for security.

Providing and placing High Back chair.SEAT ASSEMBLY: The Cushioned seat inner is made of injection moulded glass filled poly- 1 165000 165000

amide. Upholstered seat (Pure Leather ) sub-assembly consists of moulded High Resilience (HR) Polyurethane foam of Density

45±2 kg/m³, and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. *Seat SIZE: 45.5cm. (D) x 52.4cm. (W) 2. BACK

ASSEMBLY: The Cushioned back is made of PU Foam with Polypropylene Injection molded Plastic Inner. *HIGH BACK SIZE:

50.5 cm. (W) x 76.7 cm. (D) Height adjustment sub assembly is inserted in the Aluminum Die Cast Arm body & all other

adjustment are provided in adjustable arm top sub assembly. · Up-Down adjustment has 8 position (10.5±0.5cm range) · Arm top

swivel adjustment- 2 position, 12°±2° swivel inside · Arm top width adjustment - Any position (2.0±0.5cm range each arm top) ·

Arm top To - Fro Adjustment- any position (4.0±0.5cm range) · Armrest top is made up of high density PU molded over glass filled

Poly-amide inner. MECHANISM: The adjustable tilting mechanism is designed with the following features: · 360° revolving type. ·

Forward tilt of sesat and back. · Upright tilt lock. · Tilt tension adjustment can be operated in seating position. · 3-position Tilt

3 Main chair limiter. . SEAT DEPTH ADJUSTMENT: Seat depth adjustment is housed below the seat and integrated with the mechanism with

help of Polypropene Seat cover. Seat Depth can be adjusted in sitting position. Seat depth adjustment range is of 5.0±0.5 cm. 6.

ADJUSTABLE BACK SUPPORT: Back Assembly is connected to buff polish die cast aluminum Spine with an Up-Down

mechanism assembly. Back Height can be adjusted in sitting position. It can be adjusted in the range of 7.5±0.5 cm.PNEUMATIC

HEIGHT ADJUSTMENT: The heavy duty class 4 pneumatic height

adjustment has an adjustment stroke of 13.0±0.3 cm. PEDESTAL: The pedestal is made of die-cast aluminium with buffing finish.

It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia.TWIN WHEEL CASTOR: 5 Nos. twin wheel

soft castors are injection moulded in Poly-amide with PU lining, having 6.5±0.1cm wheel Diameter and assembled to pedestal.

Digitally signed by AMIT

Providing and placing mid back Chair .SEAT ASSEMBLY: The Cushioned seat inner is made of injection moulded glass filled poly- 4 84460 337840

amide. Upholstered seat (Pure Leather )sub-assembly consists of moulded High Resilience (HR) Polyurethane foam of Density

45±2 kg/m³, and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. *Seat SIZE: 45.5cm. (D) x 52.4cm. (W) 2. BACK

ASSEMBLY: The Cushioned back is made of PU Foam with Polypropylene Injection molded Plastic Inner.MID BACK SIZE: 50.5

cm. (W) x 61.8cm. (D) Height adjustment sub assembly is inserted in the Aluminum Die Cast Arm body & all other adjustment are

provided in adjustable arm top sub assembly. · Up-Down adjustment has 8 position (10.5±0.5cm range) · Arm top swivel

adjustment- 2 position, 12°±2° swivel inside · Arm top width adjustment - Any position (2.0±0.5cm range each arm top) · Arm top

To - Fro Adjustment- any position (4.0±0.5cm range) · Armrest top is made up of high density PU molded over glass filled Poly-

amide inner. MECHANISM: The adjustable tilting mechanism is designed with the following features: · 360° revolving type. ·

Forward tilt of sesat and back. · Upright tilt lock. · Tilt tension adjustment can be operated in seating position. · 3-position Tilt

4 Visitor Chair limiter. . SEAT DEPTH ADJUSTMENT: Seat depth adjustment is housed below the seat and integrated with the mechanism with

help of Polypropene Seat cover. Seat Depth can be adjusted in sitting position. Seat depth adjustment range is of 5.0±0.5 cm. 6.

ADJUSTABLE BACK SUPPORT: Back Assembly is connected to buff polish die cast aluminum Spine with an Up-Down

mechanism assembly. Back Height can be adjusted in sitting position. It can be adjusted in the range of 7.5±0.5 cm.PNEUMATIC

HEIGHT ADJUSTMENT: The heavy duty class 4 pneumatic height

adjustment has an adjustment stroke of 13.0±0.3 cm. PEDESTAL: The pedestal is made of die-cast aluminium with buffing finish.

It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia.TWIN WHEEL CASTOR: 5 Nos. twin wheel

soft castors are injection moulded in Poly-amide with PU lining, having 6.5±0.1cm wheel Diameter and assembled to pedestal.

Two Seater Sofa 2 SEATER SOFA- Muuto InSitu 2 Seater Sofa Country of Production: Denmark Supplying and placing in position 2 Seater Sofa 2 419750 839500

of size 1420mm W x 1070 mm D x Seat Depth 740mm with Seat Height 380mm. Product Material Frame in powder-coated steel. Modules in

an FSC™-certified (FSC-C028824) wood construction with foam and wadding. Fully upholstered with approved fabric. Powder Coated Steel

Steel is an alloy of iron with carbon. Powder coated steel has a subtle, textured expression and elegant feel while adding durability to the

design and making it more resistant to corrosion. Powder coated steel is also highly chip resistant.The inside of the In Situ sofa features a

5 2 seater sofa foam core with a pillowcase filled with fiber balls. All upholstered products contain flame retardant foam in order to fulfill the stringent

flammability standards under the UK Furniture and Furnishings Fire Safety Regulations. The flame retardant used in the foam is melamine,

CAS number: 108-78 1. Warranty: 12-year limited warranty, 5-year guarantee to the fabrics and foam Eco-Labels & Certificates Forest

Stewardship Council™ (FSC-C028824), Bifma X 7.1, CDPH 01350 Strength, Durability & Stability Certificates: BIFMA X5.4 — Lounge & Public

Providing and placing in position Centre Table having a size of : 1000mm(L) x 600mm(D) x 425mm(H). Understructure of the table 2 32900 65800

which includes Legs, top wooden frame & bottom tie members are made out of first quality rubberwood of approved make without

knots &defects on all faces. Bottom tray is made of 1.2mm thick MS sheet. Metal brackets are used for assembly purpose. Top:

8mm thick toughened glass of approved make. Construction: Knock-down assembly.Wooden members are PU painted with

6 Center table hardness-2H. Metal components are powder coated. Bottom MS metal tray is having floral pattern laser-cut. Top glass is having

sand blasted floral pattern on bottom surface 5. Hardware: Knock-down assembly with high quality standard hardware like screws,

metal inserts, wooden dowel, plastic leg bush. Complete all as per the dimension of Engineer-in-charge.Complete all as per the

direction of Engineer in Charge.

Supplying and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be 2060W x 905D x 855H. The seat 1 43458 43458

should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2

kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density

Ante room 3 seater 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette.

7 Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as

per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag

spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel

(grade SS 202) tube & plate with plastic endcap.

Supplying and Placing in place of 1 seater sofa. The overall dimensions of the sofa shall be 860W x 905D x 855H. The seat should 2 27238 54476

be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu.

Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2

kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette.

8 1 seater sofa Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as

per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag

spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel

(grade SS 202) tube & plate with plastic endcap.

Digitally signed by AMIT

Overall Size : Width : 120cm Depth : 60cm Height : 36.7cm Materials : All carcass panel are made of 18 mm prelaminated 1 17258 17258

particle board with edge banding 1.5 mm thickness.Drawer bottom is made of .9 mm thick prelaminated particle board .Drawer

front is made of 18 mm thick PU painted MDF . Legs : Rubber wood . Hardware : Hettich . Construction : Knock down .Finish : All

9 Center table

18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band. PU lamination is high gloss in Ecru shade

.Packets : 1 nos . Materials : All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm

Providing and Placing Main TAble of Size 3000x2550x740.MAIN WORKTOP Size 3000x1050x740, ERU 1500x600x610mm- Main 1 415500 415500

worktop - Made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All

edges are edge banded with matching 1mm thick veneer lipping.LEATHER PAD:Made of 18mm Thick (±1) MDF with Leatherette

wrapped around top surface. This leather pad is fixed to main top panel.DRAWER UNIT:Top panel and drawer unit modesty panel

is made of 43mm Thick (±1) combination ofMDF and particle board with top veneer face coated with clear lacquer. All thickness

edges are edge banded with matching lipping.Remaining construction is of 18mm Pre-laminated twin board (PLT) of E1-P2 grade

and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Bottom panel of drawer is

9mm thick particle board with leatherette on top surface.Drawer unit is provided with soft closing channels for smooth opening and

closing.Drawer unit is secured with side central lock.OPEN STORAGE UNIT:Top panel and open storage unit modesty panel is

10 Chairman Main table made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All thickness

edges are edge banded with matching lipping.Remaining construction is of 18mm Pre-laminated twin board (PLT) of E1-P2 grade

and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.MODESTY:Made of 18mm

Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with

matching 2 mm thick PVC lipping. Modesty is fitted with aluminum trims.UNDERSTRUCTURE:Made of 18mm Thick Pre-

laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm

thick PVC lipping. Door is fixed with soft closing hinges and handle is provided for ease of opening.Also lock is provided on side

panel for security.ACCESS FLAP WITH POWER BOX:Soft closing access flap with power box contains 3 Universal Sockets, 2

USB power points, 1 HDMI connection, 1 inbuilt misc. cable grommet and CAT 3 and CAT 6connections.

Providing and placing Back unit of size 3000 mm(L)x470mm(D)x2325mm(H).CONSTRUCTION AND MATERIAL: Made from 1 138961 138961

combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA for 600W and 0.8mm CRCA for

1200W), Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). Shelves are 12 bend

panel made of 0.7mm Thick CRCA (D Grade, IS-513). 4 nos of shelves for 1950H and 5 nos of shelves for 2325H back unit.

Storage body is powder coated with Epoxy Polyester to the thickness of 50 microns (+/-10 micron). Finish VENEER DOOR: Made

11 Chairman Backunit of 12mm Thick (±1) MDF with 3.5mm veneer both side and face coated with clear lacquer. All edges are edge banded with

matching 1mm thick veneer lipping. Door is provided with soft closing hinge. Handle is also provided for ease of opening. Storage

is secured with 3 way cam lock.GLASS DOOR: Made from the combination of aluminium alloy (63400) extrusion and 4mm clear

toughened glass. Aluminium extrusion of glass doors are powder coated with Epoxy Polyester to the thickness of 50 microns (+/-

10 micron). Handle is provided for ease of opening. RH Glass Door is provided with 3 way cam lock for security.

Providing and placing High Back chair.SEAT ASSEMBLY: The Cushioned seat inner is made of injection moulded glass filled poly- 1 165000 165000

amide. Upholstered seat (Pure Leather ) sub-assembly consists of moulded High Resilience (HR) Polyurethane foam of Density

45±2 kg/m³, and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. *Seat SIZE: 45.5cm. (D) x 52.4cm. (W) 2. BACK

ASSEMBLY: The Cushioned back is made of PU Foam with Polypropylene Injection molded Plastic Inner. *HIGH BACK SIZE:

50.5 cm. (W) x 76.7 cm. (D) Height adjustment sub assembly is inserted in the Aluminum Die Cast Arm body & all other

adjustment are provided in adjustable arm top sub assembly. · Up-Down adjustment has 8 position (10.5±0.5cm range) · Arm top

swivel adjustment- 2 position, 12°±2° swivel inside · Arm top width adjustment - Any position (2.0±0.5cm range each arm top) ·

Arm top To - Fro Adjustment- any position (4.0±0.5cm range) · Armrest top is made up of high density PU molded over glass filled

Poly-amide inner. MECHANISM: The adjustable tilting mechanism is designed with the following features: · 360° revolving type. ·

Forward tilt of sesat and back. · Upright tilt lock. · Tilt tension adjustment can be operated in seating position. · 3-position Tilt

12 Main chair limiter. . SEAT DEPTH ADJUSTMENT: Seat depth adjustment is housed below the seat and integrated with the mechanism with

help of Polypropene Seat cover. Seat Depth can be adjusted in sitting position. Seat depth adjustment range is of 5.0±0.5 cm. 6.

ADJUSTABLE BACK SUPPORT: Back Assembly is connected to buff polish die cast aluminum Spine with an Up-Down

mechanism assembly. Back Height can be adjusted in sitting position. It can be adjusted in the range of 7.5±0.5 cm.PNEUMATIC

HEIGHT ADJUSTMENT: The heavy duty class 4 pneumatic height

adjustment has an adjustment stroke of 13.0±0.3 cm. PEDESTAL: The pedestal is made of die-cast aluminium with buffing finish.

It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia.TWIN WHEEL CASTOR: 5 Nos. twin wheel

soft castors are injection moulded in Poly-amide with PU lining, having 6.5±0.1cm wheel Diameter and assembled to pedestal.

Digitally signed by AMIT

Providing and placing mid back Chair .SEAT ASSEMBLY: The Cushioned seat inner is made of injection moulded glass filled poly- 4 84460 337840

amide. Upholstered seat (Pure Leather )sub-assembly consists of moulded High Resilience (HR) Polyurethane foam of Density

45±2 kg/m³, and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. *Seat SIZE: 45.5cm. (D) x 52.4cm. (W) 2. BACK

ASSEMBLY: The Cushioned back is made of PU Foam with Polypropylene Injection molded Plastic Inner.MID BACK SIZE: 50.5

cm. (W) x 61.8cm. (D) Height adjustment sub assembly is inserted in the Aluminum Die Cast Arm body & all other adjustment are

provided in adjustable arm top sub assembly. · Up-Down adjustment has 8 position (10.5±0.5cm range) · Arm top swivel

adjustment- 2 position, 12°±2° swivel inside · Arm top width adjustment - Any position (2.0±0.5cm range each arm top) · Arm top

To - Fro Adjustment- any position (4.0±0.5cm range) · Armrest top is made up of high density PU molded over glass filled Poly-

amide inner. MECHANISM: The adjustable tilting mechanism is designed with the following features: · 360° revolving type. ·

Forward tilt of sesat and back. · Upright tilt lock. · Tilt tension adjustment can be operated in seating position. · 3-position Tilt

13 Visitor Chair limiter. . SEAT DEPTH ADJUSTMENT: Seat depth adjustment is housed below the seat and integrated with the mechanism with

help of Polypropene Seat cover. Seat Depth can be adjusted in sitting position. Seat depth adjustment range is of 5.0±0.5 cm. 6.

ADJUSTABLE BACK SUPPORT: Back Assembly is connected to buff polish die cast aluminum Spine with an Up-Down

mechanism assembly. Back Height can be adjusted in sitting position. It can be adjusted in the range of 7.5±0.5 cm.PNEUMATIC

HEIGHT ADJUSTMENT: The heavy duty class 4 pneumatic height

adjustment has an adjustment stroke of 13.0±0.3 cm. PEDESTAL: The pedestal is made of die-cast aluminium with buffing finish.

It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia.TWIN WHEEL CASTOR: 5 Nos. twin wheel

soft castors are injection moulded in Poly-amide with PU lining, having 6.5±0.1cm wheel Diameter and assembled to pedestal.

Providing and placing sofa of size 1520mm (W)x 840mm (D)x760(H) . Pure Leather Upholstery - Pigmented Durable and 2 81617 163234

ergonomically perfect for seating. The top grains of leather is clearly visible which adds to the aesthetics S Spring Webbing-

Provides bouncing back action for floating feeling.Construction- Made of solid wood frame with ply cross section which is moisture

14 2 seater sofa , termite and borer resistant. Adequate treatment of wood initiated to enhance longevity and maintain robustness.PLY - 12 mm,

PLY - 6mm flexiply , Paper board 3mm , webbing 2 inch , Zigzag Spring - 3.8mm

Comfort- The seat is made of soft foam of density 28 kg/m3 which enhances comfort and cushioning with sinking feeling. Ground

Elevation- Equipped with legs, the sofa is elevated to allow a level of ground clearance.

Providing and placing in position Centre Table having a size of : 1000mm(L) x 600mm(D) x 425mm(H). Understructure of the table 2 23854 47708

which includes Legs, top wooden frame & bottom tie members are made out of first quality rubberwood of approved make without

knots &defects on all faces. Bottom tray is made of 1.2mm thick MS sheet. Metal brackets are used for assembly purpose. Top:

8mm thick toughened glass of approved make. Construction: Knock-down assembly.Wooden members are PU painted with

15 Center table hardness-2H. Metal components are powder coated. Bottom MS metal tray is having floral pattern laser-cut. Top glass is having

sand blasted floral pattern on bottom surface 5. Hardware: Knock-down assembly with high quality standard hardware like screws,

metal inserts, wooden dowel, plastic leg bush. Complete all as per the dimension of Engineer-in-charge.Complete all as per the

direction of Engineer in Charge.

Supplying and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be 2060W x 905D x 855H. The seat 1 43458 43458

should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2

kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density

Ante room 3 seater 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette.

16 Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as

per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag

spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel

(grade SS 202) tube & plate with plastic endcap.

Supplying and Placing in place of 1 seater sofa. The overall dimensions of the sofa shall be 860W x 905D x 855H. The seat should 2 27238 54476

be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu.

Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2

kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette.

17 1 seater sofa Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as

per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag

spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel

(grade SS 202) tube & plate with plastic endcap.

Overall Size : Width : 120cm Depth : 60cm Height : 36.7cm Materials : All carcass panel are made of 18 mm prelaminated 1 17258 17258

particle board with edge banding 1.5 mm thickness.Drawer bottom is made of .9 mm thick prelaminated particle board .Drawer

front is made of 18 mm thick PU painted MDF . Legs : Rubber wood . Hardware : Hettich . Construction : Knock down .Finish : All

18 Center table 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band. PU lamination is high gloss in Ecru shade

.Packets : 1 nos . Materials : All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm

Digitally signed by AMIT

Providingin place of main table with overall size of table 2400 x 2350 x 750mm. The main table shall be of size 2350 x 1150 x 4 113102 452408

750mm. The side unit shall be 1200 x 600 x 750mm. The table is made of 25 mm thick MDF – one side pre-laminate board

confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build power box are

provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board

confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick MDF one

side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made

19 DGM main table of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC

lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with

matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC

membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel

Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease

of opening. Pedestals are provided with lock for security.

The Back Unit shall be of dimensions 2350 x 500 x 750mm. It shall be made of 25mm thick MDF – one side pre-laminate board 4 51722 206888

confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. The Slide door unit is made of 25 mm thick Pre-

laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Shutters have a

20 DGM Backunit

soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock for security.

Proving and placeing High back chair: SEAT ASSEMBLY : 4 25100 100400

The seat assembly is made up of 15mm thick moulded plywood layered with assembly of P.U foam of 45 kg/m3 density and slab

stock foam of 28 kg/m3 density and whole sub-assembly is then upholstered with leatherette cover.

2. BACK ASSEMBLY :

The back assembly is made up of 12 mm thick moulded plywood layered with P.U foam of 45 kg/m3 density and U-foam of 28

kg/m3 density. A 200 GSM recron sheet is placed over the P,U foam and whole sub-assembly is upholstered with leatherette

3, ARMRESTS (FIXED) : The armrest is made of die cast aluminium with buffing finish.

21 DGM main chair 4, CENTER TILT WITH MULTI POSITION LOCK MECHANISM: The mechanism is designed with the following features:

- 360° revolving type

- 3 position locking

- Tilt tension adjustment

5, PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has a stroke of 10.0$0.3cm.

6, PEDESTAL ASSEMBLY :

The pedestal is made of high-pressure die-cast polished aluminum with a buffed outside surface and black color coated internal

surface. It is fitted with 5 castors and has a pitch-center diameter of 67.5t0.5 cm.

Proving and placeing mid back chair: SEAT ASSEMBLY : 12 24000 288000

The seat assembly is made up of 15mm thick moulded plywood layered with assembly of P.U foam of 45 kg/m3 density and slab

stock foam of 28 kg/m3 density and whole sub-assembly is then upholstered with leatherette cover.

2. BACK ASSEMBLY :

The back assembly is made up of 12 mm thick moulded plywood layered with P.U foam of 45 kg/m3 density and U-foam of 28

kg/m3 density. A 200 GSM recron sheet is placed over the P,U foam and whole sub-assembly is upholstered with leatherette

3, ARMRESTS (FIXED) : The armrest is made of die cast aluminium with buffing finish.

22 Visitor chair 4, CENTER TILT WITH MULTI POSITION LOCK MECHANISM: The mechanism is designed with the following features:

- 360° revolving type

- 3 position locking

- Tilt tension adjustment

5, PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has a stroke of 10.0$0.3cm.

6, PEDESTAL ASSEMBLY :

The pedestal is made of high-pressure die-cast polished aluminum with a buffed outside surface and black color coated internal

surface. It is fitted with 5 castors and has a pitch-center diameter of 67.5t0.5 cm.

Supplying and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be 2060W x 905D x 855H. The seat 4 43458 173832

should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2

kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density

28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette.

23 3 seater sofa Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as

per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag

spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel

(grade SS 202) tube & plate with plastic endcap.

Digitally signed by AMIT

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with 4 13800 55200

understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of

24 Center table table shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm.

Providingin place of main table with overall size of table 2100 x 2250 x 750mm. The main table shall be of size 2100 x 1050 x 11 110483 1215313

750mm. The side unit shall be 1200 x 500 x 750mm. The table is made of 25 mm thick MDF – one side pre-laminate board

confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build power box are

provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board

confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick MDF one

side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made

25 GM main table of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC

lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with

matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC

membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel

Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease

of opening. Pedestals are provided with lock for security.

The Back Unit shall be of dimensions 1800 x 500 x 750mm. It shall be made of 25mm thick MDF – one side pre-laminate board 11 46894 515834

confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. The Slide door unit is made of 25 mm thick Pre-

laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Shutters have a

26 GM backunit

soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with lock for security.

Providing and Placing High Back Chair with overall size of 76.1 cm W x 76.1 cm D x 112.7 – 130.2 cm H x 43.1 – 53.1 cm Seat 11 22517 247687

Height. The seat is cushioned seat made of injection molded plastic outer & inner. Plastic inner is upholstered with leatherette and

molded high resilience polyurethane foam of density 45±2 kg/m³, & hardness load of 16±2 kgf as per IS:7888 for 25%

compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW round

tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm. The armrest

top is molded from polyurethane and mounted on to a drop lift adjustable type tubular armrest support made of Ø3.81±0.03cm x

0.2±0.01cm thick M.S. ERW tube having chrome plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The

adjustable tilting mechanism is designed with following features : 360° revolving type, front-pivot for tilt with feet resting on ground

27 GM main chair and continuous lumbar support ensuring more comfort, tilt tension adjustment can be operated in seating position, 5-position tilt

limiter giving option of variable tilt angle to the chair, Seat/back tilt ratio 1:2, The mechanism housing is made up of HPDC

aluminium black powder coated. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth

adjustment range is of 6.0±0.5cm. Back frame is connected to the up/down mechanism in plastic T spine. It can be adjusted in the

range of 7.42±0.5 comfort the comfortable back support to suit individual need. The pneumatic height adjustment has an

adjustment stroke of 10.0±0.3cm. The pedestal is high pressure die cast polished aluminium & fitted with 5 nos. of twin wheel

castors. The pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5 nos. of twin wheel castors are injection molded

in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal.

Providing and Placing Mid Back Chair with overall size of 76.1 cm W x 76.1 cm D x 96.5 – 114 cm H x 43.1 – 53.1 cm Seat 33 21015 693495

Height. The seat is cushioned seat made of injection molded plastic outer & inner. Plastic inner is upholstered with leatherette and

molded high resilience polyurethane foam of density 45±2 kg/m³, & hardness load of 16±2 kgf as per IS:7888 for 25%

compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW round

tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm. The armrest

top is molded from polyurethane and mounted on to a drop lift adjustable type tubular armrest support made of Ø3.81±0.03cm x

0.2±0.01cm thick M.S. ERW tube having chrome plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The

adjustable tilting mechanism is designed with following features : 360° revolving type, front-pivot for tilt with feet resting on ground

28 Visitor chair and continuous lumbar support ensuring more comfort, tilt tension adjustment can be operated in seating position, 5-position tilt

limiter giving option of variable tilt angle to the chair, Seat/back tilt ratio 1:2, The mechanism housing is made up of HPDC

aluminium black powder coated. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth

adjustment range is of 6.0±0.5cm. Back frame is connected to the up/down mechanism in plastic T spine. It can be adjusted in the

range of 7.42±0.5 comfort the comfortable back support to suit individual need. The pneumatic height adjustment has an

adjustment stroke of 10.0±0.3cm. The pedestal is high pressure die cast polished aluminium & fitted with 5 nos. of twin wheel

castors. The pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5 nos. of twin wheel castors are injection molded

in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal.

Digitally signed by AMIT

Supplying and Placing in place of 2 seater sofa. The overall dimensions of the sofa shall be 1460W x 905D x 855H. The seat 11 35501 390511

should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2

kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density

28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette.

29 2 seater sofa Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as

per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag

spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel

(grade SS 202) tube & plate with plastic endcap.

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with 11 13800 151800

understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of

30 Center table table shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm.

CONSULTANT ROOM

Supplying and placing in position Table of the following specifications. Table size shall be 1500 Width mm x 750 Depth mm x 740 15 52717 790755

Height mm .Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm

thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle

Consultant table board ( ) PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading. ERU

31 LHS size shall be 1050 Width x 450 Depth x 705 Height. The top shall be 25 mm thick plain particle board (PPB) Clad with 0.6

/Manager Module

mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading.

The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides.

Edge sealed with 2 mm thick PVC Beading.

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon & 15 13115 196725

upholstered using net fabric with high tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded

with density =55+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down

adjustment of 8.5 ± 0.5cm which is provided in armrest structure. Armrest top has an integrated layer of thermoplastic elastomer.

Armrest is made up of plastic injection moulded nylon with textured top. It shall have Front pivot synchro mechanism with following

features. 360 degree revolving type, Single point control, front fivot tilt, tilt tension adjustment, 4 position locking with anti- shock

feature, seat/back tilting ration of 1:2. The lumber support consists of polypropylene pad with mouled polyurathene foam & covered

with polyester fabric. The height of lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad.

Lumber pad has an adjustment of 8.0± 0.5 cm in height. The must be greenguard certified. the work shall be carried out as per

guidance and instructions recieved from Engineer Incharge. This shall come along a headrest from same family. It shall be SCS

IAQ certified for Indoor Air Quality.

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon & 30 12115 363450

upholstered using net fabric with high tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded

with density =55+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down

adjustment of 8.5 ± 0.5cm which is provided in armrest structure. Armrest top has an integrated layer of thermoplastic elastomer.

Armrest is made up of plastic injection moulded nylon with textured top. It shall have Front pivot synchro mechanism with following

33 Visitor Chair features. 360 degree revolving type, Single point control, front fivot tilt, tilt tension adjustment, 4 position locking with anti- shock

feature, seat/back tilting ration of 1:2. The lumber support consists of polypropylene pad with mouled polyurathene foam & covered

with polyester fabric. The height of lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad.

Lumber pad has an adjustment of 8.0± 0.5 cm in height. The must be greenguard certified. the work shall be carried out as per

guidance and instructions recieved from Engineer Incharge. It shall be SCS IAQ certified for Indoor Air Quality.

Supplying of Recta workstation of size 1200X 600x 750 with KBPT , Pedestal , CPU Trolley .Providing DESK based modular 236 29717 7013212

workstation with worktop thickness 25mm System ht - 750 mm .Understructure - The slanted/stright legs with perforated metal

modesty in between are connected to the understructure with the help of PDC Connectors to provide a stable and sturdy base for

the worktops. Modesty panel shall be of Metal 1.2 mm thick CRCA and separate Modesty panel between workstations. Wire

Management : Metal powder coated power box with wire raiser+D56 is given to pull wires from the floor junction box upto the

34 Linear Workstation power box fixed under neath the worktop. Aluminium access flaps on worktop above power box cut out for accessing

switches.Worktop mounted metal modesty made from 0.8 mm thk CRCA (IS: 513) is provided.Worksurface - out of 25 mm thk

prelam particle board with flat pvc lipping edge banding of size 1200 mm w x 600 mm d.Pedestals - Nova pedestal flat metal front,

full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. .The product should be

GREENPRO, SCS IAQ, GRIHA, BIFMA certified.

Digitally signed by AMIT

Providing and Placing mid back Chair .SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. thick hot-pressedplywood 236 10433 2462188

and upholstered with fabric upholstery covers and moulded Polyurethane foam.The seat has extra thick foam on front edge to give

comfort to popliteal area.The Back is injection moulded in glass filled Polypropylene which is upholstered withMesh fabric.The back

consist of adjustable lumbar support made of injection mouldedPolypropylene having an adjustment of 5.0 ±0.1 cm.The chair seat

& back size are

*SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)*MESH BACK SIZE 51.0 cm. (W) x 70.0 cm. (H)2. HIGH RESILIENCE (HR)

POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per

IS:7888 for 25% compression.

35 Workstation chair 3. ARMRESTS :The adjustable armrest is designed with the following features :· Up-Down adjustment– 6 steps (7.2 ± 0.5cm

range)· Armrest top is mounted on Armrest structure made of glass filled Nylon· Armrest Top is PU moulded over glass filled

4. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism isdesigned with the following features:· 360°

revolving type.· 3 position locking with anti shock mechanism.]· Tilt tension adjustment PNEUMATIC HEIGHT ADJUSTMENT:

The pneumatic height adjustment with anadjustment stroke of 9.5 ± 0.3cm.

PEDESTAL ASSEMBLY : The pedestal is injection moulded in glass-filled Nylon andfitted with 5 nos. twin wheel castors. The

pedestal is 66.1 ±0.5cm. pitch-center dia.(76.1 ±1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are

injection moulded in Black Nylon

Providing and Placing in position Conference table for 36 seater having 16 Nos of 2 Seater Modules of size 1350mm X 600mm 1 259011 259011

X 740mm , 2 Nos of one seater module . Worktop- Made of 25mm thick MDF-one side pre-laminate board conforming to

IS-14587:1998 and having chamfered edge.Plastic ABS access flap is provided for easy access to wires and cables.Modesty

consist of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconforming to IS-12823:1990, Aluminium

alloy 63400 - WP profile is used for connecting panels together. The product has a knock-down construction.It consist of 18mm

Conference table 33 Thick Pre-laminated twin board of E1-P2 grade and approved shadeconforming to IS-12823:1990, Edge banded with matching 2

seater mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels together. The product has a knock-down

construction.An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated(DFT 40-60 microns) is used

for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided below worktop. Cutout on top with two

piece injectionmoulded plastic part polymer component is fitted to pull out audio,video cables ontoworktop and connect devices

charger to power socket below worktop.

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon & 1 13115 13115

upholstered using net fabric with high tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded

with density =55+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down

adjustment of 8.5 ± 0.5cm which is provided in armrest structure. Armrest top has an integrated layer of thermoplastic elastomer.

Armrest is made up of plastic injection moulded nylon with textured top. It shall have Front pivot synchro mechanism with following

features. 360 degree revolving type, Single point control, front fivot tilt, tilt tension adjustment, 4 position locking with anti- shock

feature, seat/back tilting ration of 1:2. The lumber support consists of polypropylene pad with mouled polyurathene foam & covered

with polyester fabric. The height of lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad.

Lumber pad has an adjustment of 8.0± 0.5 cm in height. The must be greenguard certified. the work shall be carried out as per

guidance and instructions recieved from Engineer Incharge. This shall come along a headrest from same family. It shall be SCS

IAQ certified for Indoor Air Quality.

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon & 32 12115 387680

upholstered using net fabric with high tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded

with density =55+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down

adjustment of 8.5 ± 0.5cm which is provided in armrest structure. Armrest top has an integrated layer of thermoplastic elastomer.

Armrest is made up of plastic injection moulded nylon with textured top. It shall have Front pivot synchro mechanism with following

38 Visitor Chair features. 360 degree revolving type, Single point control, front fivot tilt, tilt tension adjustment, 4 position locking with anti- shock

feature, seat/back tilting ration of 1:2. The lumber support consists of polypropylene pad with mouled polyurathene foam & covered

with polyester fabric. The height of lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad.

Lumber pad has an adjustment of 8.0± 0.5 cm in height. The must be greenguard certified. the work shall be carried out as per

guidance and instructions recieved from Engineer Incharge. It shall be SCS IAQ certified for Indoor Air Quality.

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon & 36 12115 436140

upholstered using net fabric with high tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded

with density =55+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down

adjustment of 8.5 ± 0.5cm which is provided in armrest structure. Armrest top has an integrated layer of thermoplastic elastomer.

Armrest is made up of plastic injection moulded nylon with textured top. It shall have Front pivot synchro mechanism with following

features. 360 degree revolving type, Single point control, front fivot tilt, tilt tension adjustment, 4 position locking with anti- shock

feature, seat/back tilting ration of 1:2. The lumber support consists of polypropylene pad with mouled polyurathene foam & covered

with polyester fabric. The height of lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad.

Lumber pad has an adjustment of 8.0± 0.5 cm in height. The must be greenguard certified. the work shall be carried out as per

guidance and instructions recieved from Engineer Incharge. This shall come along a headrest from same family. It shall be SCS

IAQ certified for Indoor Air Quality.

Digitally signed by AMIT

Providing and placing in position discussion table.The overall size of the wortop shall be 3200mm x 1500mm x 740mm. Worktop 1 46551 46551

shall be made from 25mm thick MDF one side prelaminate and having chamfered edge. Soft closing dual access flap provided

for access to power supply and data cables. The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin

board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.

Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics.The product has a knock-

Meeting room 9 down construction. A wire raiser made of 0.8mm CRCA MS IS:513. It is epoxy polyester powder coated (DFT 40-60 microns) for

seater flow of wires and cables. A Powerbox with 2 cutouts on either sides for standard 8 module Anchor Roma is provided. Beside each

cutout, an additional cutout with plate is provided for mounting .Audio Visual Cables(eg. HDMI,VGA-A,etc). The product must be

UL Greenguard certified.Complete all as per the

direction of Engineer in Charge.Company is ISO-9001:2015,ISO-14001:2015,ISO-45001:2018, BIFMA and AIOTA certified.

Product is Greenguard(UL) Certified.

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon & 1 13115 13115

upholstered using net fabric with high tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded

with density =55+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down

adjustment of 8.5 ± 0.5cm which is provided in armrest structure. Armrest top has an integrated layer of thermoplastic elastomer.

Armrest is made up of plastic injection moulded nylon with textured top. It shall have Front pivot synchro mechanism with following

features. 360 degree revolving type, Single point control, front fivot tilt, tilt tension adjustment, 4 position locking with anti- shock

feature, seat/back tilting ration of 1:2. The lumber support consists of polypropylene pad with mouled polyurathene foam & covered

with polyester fabric. The height of lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad.

Lumber pad has an adjustment of 8.0± 0.5 cm in height. The must be greenguard certified. the work shall be carried out as per

guidance and instructions recieved from Engineer Incharge. This shall come along a headrest from same family. It shall be SCS

IAQ certified for Indoor Air Quality.

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon & 8 12115 96920

upholstered using net fabric with high tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded

with density =55+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down

adjustment of 8.5 ± 0.5cm which is provided in armrest structure. Armrest top has an integrated layer of thermoplastic elastomer.

Armrest is made up of plastic injection moulded nylon with textured top. It shall have Front pivot synchro mechanism with following

42 Visitor Chair features. 360 degree revolving type, Single point control, front fivot tilt, tilt tension adjustment, 4 position locking with anti- shock

feature, seat/back tilting ration of 1:2. The lumber support consists of polypropylene pad with mouled polyurathene foam & covered

with polyester fabric. The height of lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad.

Lumber pad has an adjustment of 8.0± 0.5 cm in height. The must be greenguard certified. the work shall be carried out as per

guidance and instructions recieved from Engineer Incharge. It shall be SCS IAQ certified for Indoor Air Quality.

Providing and placing in position discussion table.The overall size of the wortop shall be 3600mm x 1500mm x 740mm. Worktop 1 60778 60778

shall be made from 25mm thick MDF one side prelaminate and having chamfered edge. Soft closing dual access flap provided

for access to power supply and data cables. The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin

board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.

Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics.The product has a knock-

Meeting room 11 down construction. A wire raiser made of 0.8mm CRCA MS IS:513. It is epoxy polyester powder coated (DFT 40-60 microns) for

seater flow of wires and cables. A Powerbox with 2 cutouts on either sides for standard 8 module Anchor Roma is provided. Beside each

cutout, an additional cutout with plate is provided for mounting .Audio Visual Cables(eg. HDMI,VGA-A,etc). The product must be

UL Greenguard certified.Complete all as per the

direction of Engineer in Charge.Company is ISO-9001:2015,ISO-14001:2015,ISO-45001:2018, BIFMA and AIOTA certified.

Product is Greenguard(UL) Certified.

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon & 1 13115 13115

upholstered using net fabric with high tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded

with density =55+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down

adjustment of 8.5 ± 0.5cm which is provided in armrest structure. Armrest top has an integrated layer of thermoplastic elastomer.

Armrest is made up of plastic injection moulded nylon with textured top. It shall have Front pivot synchro mechanism with following

features. 360 degree revolving type, Single point control, front fivot tilt, tilt tension adjustment, 4 position locking with anti- shock

feature, seat/back tilting ration of 1:2. The lumber support consists of polypropylene pad with mouled polyurathene foam & covered

with polyester fabric. The height of lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad.

Lumber pad has an adjustment of 8.0± 0.5 cm in height. The must be greenguard certified. the work shall be carried out as per

guidance and instructions recieved from Engineer Incharge. This shall come along a headrest from same family. It shall be SCS

IAQ certified for Indoor Air Quality.

Digitally signed by AMIT

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon & 10 12115 121150

upholstered using net fabric with high tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded

with density =55+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down

adjustment of 8.5 ± 0.5cm which is provided in armrest structure. Armrest top has an integrated layer of thermoplastic elastomer.

Armrest is made up of plastic injection moulded nylon with textured top. It shall have Front pivot synchro mechanism with following

45 Visitor Chair features. 360 degree revolving type, Single point control, front fivot tilt, tilt tension adjustment, 4 position locking with anti- shock

feature, seat/back tilting ration of 1:2. The lumber support consists of polypropylene pad with mouled polyurathene foam & covered

with polyester fabric. The height of lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad.

Lumber pad has an adjustment of 8.0± 0.5 cm in height. The must be greenguard certified. the work shall be carried out as per

guidance and instructions recieved from Engineer Incharge. It shall be SCS IAQ certified for Indoor Air Quality.

Suppy & placing full height standee table (cafe tables) of 3-3.5 ft (H) x 2-2.5 ft (w) with high impact strength PolyPropylene polymer 5 9990 49950

compound with indoor grade UV resistance.

46 Canteen table

Compactor-Overall size2047H x 1200W x 800D. Designed for long life and easy part replacement. Uses one common aisle 12 36781 441372

spacethat optimizes available space. PU drive wheel for firm grip and hassle-free mobility. Channel stoppers prevent derailment.

Label holders with neat transparent acrylic sheets facilitate easy identification. Locking stiffeners for centralised locking ensures

48 Compactor (Per body) safety of documents. Rotating locks with easy to identify lock/unlock positions ensures safety. Shims providedbelow the rails for

right laveling.Complete all as per the direction of Engineer-in-charge.Company is ISO-9001:2015,ISO-14001:2015,ISO-

45001:2018, BIFMA and AIOTA certified. Product is Greenguard(UL) Certified.

Overall size High-back sofa offering firm lumbar support for comfortable upright or casual seating.• Broad seating space plus 1 33784 33784

longer length of the 3-seater makes it ideal for napping or relaxed lounging.• A unique and aesthetic armrest, with a wooden

MD waiting 3 seater panel on top, which doubles up as a coffee table.• Comes in LH and RH configurations for higher flexibility.

Overall size High-back sofa offering firm lumbar support for comfortable upright or casual seating.• Broad seating space plus 2 28794 57588

longer length of the 2-seater makes it ideal for napping or relaxed lounging.• A unique and aesthetic armrest, with a wooden

panel on top, which doubles up as a coffee table.• Comes in LH and RH configurations for higher flexibility.

50 2 seater sofa

Overall size of 1200mm(L)x594mm(D)x411mm(H).Ultra-modern combination of wood and glass, specifically shaped and 2 14365 28730

engineered to give it stability. Now, your drinks won’t spill as easily in case of accidental tugs and yanks.• The Wenge finish of the

coffee table is done with utmost care, making it a posh addition to your space.• Has multiple compartments to store books,

51 Center table magazines, or place decor items. A hidden compartment within can be used to store utility bills and keys.

Overall size of 600mm(L)x600mm(D)x450mm(H)Designed for the modern minimalist with a need for handy, compartmentalized 2 10426 20852

storage.• Tabletop of durable, toughened glass with a digitally back-printed Skyline pattern creates a sleek, modern look.• A

strong, knockdown construction built for longevity.

52 Corner table

Digitally signed by AMIT

Supplying and Placing a Reception table of size 2400 X 1770 X 1080 MM, Made of 25mm Thick Pre-laminated twin board of E1- 1 81900 81900

P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap

provided on work surface for wire management. Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8+3

Module cutout provision for Anchor Roma). This is fixed with worktop along the width at Access Flap position Made of 25mm Thick

Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm

thick PVC lipping. Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-

12823:1990, Edge banded with matching 2 mm thick PVC lipping.Made of 18mm Thick Pre-laminated twin board of E1-P2 grade

and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping Made of 18mm Thick Pre-

53 Reception table laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick

PVC lipping.**Drawer bottom is made of 5.5thk MDF whiteboard Handle is provided for ease of opening. HDU and Drawer is

provided with cam lock for security Wire Riser made of 0.8mm CRCA (IS-513) is provided for proper wire management. Organizer

Plate made of 1.2mm CRCA (IS-513) is provided for magnetic sticky notes. Bag Hanger Hook made of 1.2mm CRCA (IS-513) is

provided for bag hanging. Company should be ISO-9001, 14001, 45001,50001, Greenguard, BIFMA and AIOTA certified. Product

should be Greenguard (UL) certified. Company and Product Certificate Must Be Certified from Valid Authorised Laboratories

The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane foam and 2 12374 24748

upholstered with high stretch knitted polyester fabric. The back size shall be 45.5cm W x 53.0cm H. The HR polyurethane foam

used in seat and back cushion is moulded in density 45kg per m3. The seat and back are firmly connected to the base frame and

are cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or back,

without need for complex manual adjusments. The cantilevered seat offers impact cushioning while seating and synchronises with

the back movement during posture changes. The ‘S: shaped spines moulded in high strength glass filled Polyamide and the spine

connector moulded in glass filled Polyamide form the back spine structure involved in multi dimensional recline motion. The

54 Reception chair variable tilt angle recline motion can be adjusted with 3 position Tilt limiter feature which is inbuilt in saet base and the tension is

user weight dependent. The adjustable armrests assembly consists of armrest housing sliding over the armrest structure, both

moulded in glass filled Polyamide. The pneumatic height adjustment shall have a stroke of 9.2cm.The pedestal is injection

moulded in glass filled Polyamide and fitted with 5 nos. twin wheel castors. The pedestal is 66cm pitch centre diameter and 76cm

with castors. The overall dimensions of the chair shall be 76cmx 76cm x(99.5-108.8cm). The seat height shall be (44.5-53.8cm).

Supplying and Placing in place of 2 seater sofa. The overall dimensions of the sofa shall be 1460W x 905D x 855H. The seat 3 35501 106503

should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2

kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density

28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette.

55 2 seater sofa Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as

per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag

spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel

(grade SS 202) tube & plate with plastic endcap.

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with 1 13800 13800

56 Center table understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of

table shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm.

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with 2 9169 18338

understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of

57 Corner table table shall be Width of table= 60.0 cm, Depth=60.0 cm, height=35.1 cm.

Digitally signed by AMIT

S. No. Description Item Unit Qty Rate Amount

Supply, installation, testing, and commissioning of smart-managed

network switch, which should have the following features or better: 24

RJ-45 autosensing 10/100/1000 Mbps Gigabit Ethernet ports (IEEE

802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE

802.3ab Type 1000BASE-T, or better), 4 SFP/SFP+ uplink ports

supporting 1/10GbE fiber transceivers (or better), a PoE+ power

budget of 270 W (Class 4) or higher, and an internal power supply

supporting input voltage of 100–127 / 200–240 VAC, 50/60 Hz. The

switch should provide a switching capacity of 128 Gbps or more, a

forwarding rate of 95.23 Mpps or higher, and be equipped with an

1 ARM Cortex-A9 processor at 800 MHz or faster, with at least 512 MB L3 Switch Nos 1 ₹ 975,000.00 ₹ 975,000.00

SDRAM, 256 MB flash memory, and a 1.5 MB packet buffer or better.

It must support Layer 2 and Layer 3 features including VLANs

(minimum 256 or more), link aggregation, Spanning Tree Protocol,

IGMP snooping, Quality of Service (QoS), port mirroring, rate limiting,

static routing, and advanced security features such as IEEE 802.1X

authentication, ACLs, and automatic denial-of-service (DoS)

protection. Management should be possible via Aruba Instant On

cloud portal, mobile app, web browser, and SNMP manager, with

multiple privilege levels and password protection. The switch must be

rack-mountable (1U form factor)

Supply, Installation, Testing and Commissioning of 48G PoE+ 4SFP+

Switch, 48 Port POE+ Access Switch to provide 48 nos. 1G Base-T

ports with minimum PoE budget of 270W and 4x 1/10GbE uplink

ports or hiegher. with at least 512 MB SDRAM and 256 MB flash

memory, and a packet buffer of 1.5 MB or more, It should support 48 Port L2

Layer 2+ features, including VLANs, Should have static, RIPv1, POE Switch

RIPv2, RIPng,OSPF, MACSEC,802.1x , PBR and VRRP from day 1 &

upgradable to support IS-IS, VXLAN & VRF. Common Criteria

Certification NDPP and Ipv6 Certification from day-1

Digitally signed by AMIT

Supply, Installation, Testing and Commissioning of 24 Port POE+

Access Switch to provide 24 nos. 1G Base-T ports with minimum PoE

budget of 270W and 4x 1/10GbE uplink ports. with at least 512 MB

SDRAM and 256 MB flash memory, and a packet buffer of 1.5 MB or

3 more, It should support Layer 2+ features, including VLANs, Should Nos 4 ₹ 375,370.00 ₹ 1,501,480.00

have static, RIPv1, RIPv2, RIPng,OSPF, MACSEC,802.1x , PBR and

VRRP from day 1 & upgradable to support IS-IS, VXLAN & VRF.

Common Criteria Certification NDPP and Ipv6 Certification from day-1

Supply, Installation, Testing & Commissioning of LED 24 Port

loaded Cat 6A Jack Panel, Staggered 24 Port panel with All port LED

in 1U Rack Unit, Copper Alloyed Contact Material, EIA 568A/B

wired, PC + glass fiber, UL 94V-0, black color, Front Port

Labeling, 22-24 AWG Wire Accumulation etc. complete as

Supply, Installation, Testing & Commissioning of dual face

plate having provision for one I/O along with spring type shutter Dual Face

for dust proof, made of ABS PVC plastic etc. complete as required. Plate

Supply, Installation, Testing & Commissioning of single face

plate having provision for one I/O along with spring type shutter for Single Face

dust proof, made of ABS PVC plastic etc. complete as required. Plate

Supply, Installation, Testing & Commissioning of CAT 6A

Information Outlet, Universal label permits T568A or B wiring, UL®

Listed, meets all TIA and ISO requirements Complete in all respect as

required by the site etc. complete as required.

Supplying and drawing of UTP 4 pair CAT 6A LAN Cable in the

8 existing surface/ recessed Steel/ PVC conduit as required.

Supply, Installation, Testing & Commissioning of CAT 6A Patch

Cord LSZH 1 Mtr, 4 pair 26 AWG stranded copper wire, Pre-

terminated with RJ45 plugs, Slim clear anti-snag slip on boots,

9 Suitable for EIA 568A or 568B wiring, UL® Listed, meets all TIA and Nos 300 ₹ 408.00 ₹ 122,400.00

ISO requirements. Complete in all respect as required by site

completion etc. complete as required.

Digitally signed by AMIT

Supply, Installation, Testing & Commissioning of CATa 6 Patch

Cord LSZH 2 Mtr, 4 pair 26 AWG stranded copper wire, Pre-

terminated with RJ45 plugs, Slim clear anti-snag slip on boots,

10 Suitable for EIA 568A or 568B wiring, UL® Listed, meets all TIA and Nos 300 ₹ 560.00 ₹ 168,000.00

ISO requirements. Complete in all respect as required by site

completion etc. complete as required.

Supply, Installation, Testing & Commissioning of Horizontal Horizontal

11 cable manager etc. complete as required. Cable Nos 16 ₹ 626.00 ₹ 10,016.00

Supplying and fixing of following sizes of medium class PVC conduit

along with accessories in surface/recess including cutting the wall and

12 PVC Conduit

making good the same in case of recessed conduit as required.

Digitally signed by AMIT

S. No. Description Item Unit Qty Rate Amoint

Supply, Installation, Testing & Commissioning of Server based Communication System

with all the required Software licenses and Hardware - IP-PBX/IP Telephony

Communications Server: The IP Telephony Solution shall support the following

Services - Voice, IM, Presence and Audio Conference The IP Telephony Solution

should support H.323 and SIP The Solution should support the following Trunks - FXO,

E1 PRI and SIP The IP Telephony solution should incorporate all licenses for the

1 Phones and Trunks Solution should support all Extensions from Day 1 with future Nos 1 ₹ 4,150,000.00 ₹ 4,150,000.00

scalabilityupto 500 users. Licenses for all Phones supplied should be provisioned on

Day1 Solution should support Hard 30 IP Phones, Softphones, Video Phones, 150

Analog Extensions with necessary Licenses, Rack mount architecture, complete as

required and as per technical specifications.or its equivalent specifications

Supply, Installation, Testing & Commissioning of Color display—2.8 inches x 2.1 inches

(7.0 cm x 5.3 cm)—Diagonal width: 3.5 inches (8.8 cm)▪ 8 buttons with dual LEDs (red,

green)▪ 4 softkeys▪ Hard buttons for phone, messages, contacts, history, home,

navigation cluster,headset, speaker, volume, mute▪ LEDs for speaker, mute, headset,

message, history▪ 24 administrative buttons▪ Wideband audio in handset and headset▪

Full duplex speakerphone ▪ Ergonomic hearing aid compatible handset supports TTD

acoustic coupler▪ Message waiting indicator▪ Mute indicator with optional mute alerting▪

IC call alerting with 360-degree visibility▪ Rich, classic, alternate, and downloadable

2 ringtones▪ Dual-position stand, optional wallmount stand▪ Gigabit Ethernet (10 / 100 / IP Phone Nos 30 ₹ 31,554.00 ₹ 946,620.00

1000) line interface▪ Second Ethernet interface 10 / 100 / 1000 Mbps▪ PoE Class (IEEE

802.3af) registers as class 1 device and supports 802.3az▪ Optional AC to 5 volt

adapter▪ Order Custom Bezels / Faceplates▪ SIP & H.323 protocol support▪ Standards-

based codec support: G.711, G.726, G.729A / B, G.722, Opus.▪ Zero touch

deployment via Device Enrollment Services Support▪ Supports the following languages:

Arabic, Brazilian Portuguese, Simplified Chinese, Dutch, English, Canadian French,

Parisian French, German, Hebrew, Italian, Japanese, Korean, Polish, Latin American

Spanish, Castilian Spanish,Thai, Turkish, and Russian. or its equivalent specifications

Supply Installation, Testing and Commissioning of Analog Speaker Phone with Analog

backlight. or its equivalent specifications Phone

Supply, Installation,Testing and commisioning of IP phone license complete as required.

Digitally signed by AMIT

Schedule of Quantities: IP BASED CCTV SYSTEM

S No Description Unit Qty Rate DSR Amount NDSR Amount

SITC of 5MP IR Vandal Proof Dome Network Camera Lens Size:

3.0mm – 13.5mm motorized vari-focal lens, Aperture F1.4 – F3.2,

NDAA Compliance must approved, Security: SSL Encryption, Multi-

User Authority, IEEE802.1x, IP Filtering, HTTPS , IR Distance : 30M

IR, Memory Support : Micro SD 512 GB, Two-way Audio

Communication supported, Audio Compression Algorithm: ADPCM

16K, G.726, G.711 u-Law, G.711 a-Law DC12V/PoE, IP67 and K10

rating, Image Sensor: 1/2.8” CMOS Maximum Resolution: 2592 x

Compression : H.265, H.264, Dynamic Range: 120dB, True Day &

Night: Yes (ICR) MJPEG Scanning Mode: Progressive Scan COLOR

: 0.15 lux @ F2.0 B/W : 0 lux (IR LED ON), Shutter Speed (Auto)

1/10000s~1s, True day/night, WDR 120db, 3D DNR, HLC & BLC,

Quadruple streams, Four Streams individually configurable, Privacy

Masking: 8 Zone, Camera shall confirm ONVIF Profile S, Smart

codec by ROI, MTBF time 1,25,000 Hours @40 degree (Report to be

submitted), Inbuilt Analytics Motion Detection, Alarm in, Tampering

and Trip Zone, Shall provide Quadruple streams, Object , SSL

Encryption, Multi-User Authority, IEEE 802.1x, IP Filtering, HTTPS ,

Operating Temperature: -40°C ~ +55°C (-40°F ~ +131°F) , Operating

Humidity: 0% to 90% non-condensing, Certification: BIS/UL, FCC, CE

approval. MAC Address: The MAC address of the proposed IP

cameras must be registered in the same name of the OEM. The IP

Camera OEM must confirm that the MAC address of the surveillance

cameras; OUI must be in the name of the OEM. etc complete as per

specifications of this and directions of Engineer-in- Charge

1 Digitally signed by AMIT

Supply, Installation, Testing & Commissioning of 32 Channel IP

network video recording capability Rack mount NVR with Redundant

Power Supply and minimum 4 Slots, should support H.264/H.265

compression, network incoming throughput of 850 Mbps and 12MP

recording resolution, time division multiplexing, real time recording of

multiple cameras, storing digitized and compressed images on

internal hard disk drives for fast search and retrieval either locally at

the unit, or from a remote workstation using a Graphical User

Interface (GUI), should allow all connected cameras to be discovered

and configured automatically, simultaneous live view, record, play

back, data transmission in real time, maximum throughput of 400

Mbps, UHD 1920 ips, support H.264/H.265 compression, 2X – 12X

digital zoom in live view mode, 2X – 12X digital zoom in playback

3 mode, time lapse, event, time lapse + event, pre / post-event, panic Nos. 1 275,529.00 275,529.00

recording schedule, recording bitrate control mode: CBR and VBR,

alarm, audio, motion, trip zone, video loss, text-in, system event

triggering, fan error, record failure, storage related alerts and alarm in

error, email, remote notification (call back) to remote work stations,

mobile device push notification, Time-lapse, Event log, Motion,

Thumbnail, Text-in search options, SSL, Password encryption

options, network keyboardfor controlling the NVR and PTZ, 1 Gigabit

Remote Client port, 4 Gigabit ports, ONVIF compliant , output

interface 1 HDMI (up to 4K), 4 internal SATA ports (10TB per SATA)

with recording capacity up to 40 TB. etc complete as per

specifications of this and directions of Engineer-in- Charge.

Supply Installation Testing & Commissioning of 43 inch Full HD LED

5 monitor including wall mount brackets/ clamps/ desk mounting stand. Nos. 1 39,195.00 39,195.00

6 Supply and fixing of RJ45 Connector Nos. 34 20.00 680.00

2 Digitally signed by AMIT

S.No. Item Specifications Qty Unit Rate Amount

Supply, installation, testing, and commissioning of a fully integrated, all-in-

one 135-inch (diagonal) direct-view LED display system, utilizing

advanced Flip-chip (COB, Chip-on-Board) LED technology or

better/equivalent, with the following minimum technical values: native Full

HD resolution (1,920 x 1,080 pixels), 1.5mm pixel pitch, peak brightness

of 700 nits, contrast ratio of at least 5,000:1, refresh rate of 3,840Hz, and

color gamut coverage of DCI-P3/Rec.709. Viewing angle must be at least

160° horizontal/vertical, with a matte/anti-glare finish. The system shall

provide front IP65 environmental protection, support a minimum viewing

1 distance of 1.5m, and incorporate built-in stereo speakers (minimum 2 x 1 Nos. ₹ 4,970,000.00 ₹ 4,970,000.00

60W). The hardware must include pre-calibrated, front-access

maintenance modules, wall-mount/floor-stand kits, and integrated

Android operating system with at least 64GB storage for media playback,

local content, and third-party apps. System control and management

shall be possible via LAN (RJ45), RS232, and wireless, with user

interface for remote diagnostics and calibration. All components must

comply with relevant or superior international safety, EMC, and

performance standards, and be supplied with all accessories required for

complete installation and operation

Supply, installation, testing, and commissioning of a 65-inch 4K UHD

professional display with an IPS panel and direct LED backlight or

better/equivalent, offering the following minimum technical values: native

resolution 3,840 x 2,160 pixels, screen brightness 440 cd/m² (nits),

contrast ratio 1,200:1 (static) and 300,000:1 (dynamic), response time

8ms, and viewing angle 178° horizontal/vertical. The display shall support

24/7 continuous operation and provide HDR compatibility with HDR10,

2 65" Led Display HLG, and Dolby Vision formats. Color reproduction shall cover at least 2 Nos. ₹ 178,000.00 ₹ 356,000.00

92% DCI-P3 through TRILUMINOS PRO technology, controlled by the

4K HDR Processor X1, with motion enhancement via Motionflow XR 240

(native 60Hz refresh rate). Inputs/outputs shall include a minimum of four

HDMI, two USB-A, one RJ45, Wi-Fi, Bluetooth, RS-232C, and

analog/digital audio. The display shall include a built-in Android OS with

at least 16GB onboard storage for smart functions, and support wireless

screen sharing via Apple AirPlay and Google Chromecast

Digitally signed by AMIT

Supply, Installation, testing and commissioning of Ceiling microphone

with automatic dynamic Beamforming technology, The beam will

automatically detect the position of the person speaking and will follow

the person around the room at all times. It should have 2 x Dante digital

audio (Redundancy), Analog audio out (Phoenix 3-pin), and Ethernet for

Control and PoE connectivity ports. The coverage of the ceiling

microphone should be min 800 square feet or more. It should have a true

Ceiling voice lift feature to increase audio intelligibility above the ambient noise

microphone floor. It should support IT industry standards like IEEE 802.1x. It can be

controlled through software that can control and monitor the microphone

in any network. It should have min 100 dB SPL, 5ms latency, and min

90dBA or higher dynamic range. High-precision audio settings for

maximum control, setting to exclude (min 5) and prioritize the areas of

the room. It should certified from Microsoft Teams and Zoom Video

conferencing applications. It should have UL 62368 certification

(including UL 2043 testing and compliance) and safety certifications.

Suppy Installation Testing and Commissioning of digital signal processor

with minimum 14no. Or more Mic / line input with phantom power and

AEC and 8 or more line level output, 1no. Or more GPIO at least 2

channel of USB input and output for software Video Conferencing, should

Digital Signal have 64x64 channel of digital dante input output, Should have sampline

Processor rate of 48kHz or better, Should be expandable for port expansion, should

support Control with App via iOS and Android devices, or any third-party

control system, Shall have Built-in filters, feedback suppression, AGC

single-device(chassis) use is permitted, but the combination of devices is

not accepted etc complete as required as per specifications

Supply, Installation, testing and commissioning of Quad channel

energy star rated digital power amplifier,Quad channel 4 Ohm or

8 ohm energy-efficient amplifier - 4 x 80W or more 70/100V

Technology : Class-D,Input linking through miniature switches,

Switching mode power supply, Protection : DC Short circuit &

Over heating & Over load & Signal limiting, Frequency Response

120 Hz - 20 kHz or better, Silent passive cooling etc complete

required as per specifications.

Digitally signed by AMIT

Supply, Installation, testing and commissioning of 6.5" two-way coaxial

thin edge ceiling loudspeaker having 100V transformer power taps from

60watts to 15watts or better it should have metal back can for premium

6 performance in demanding applications, Conical dispersion : 142° or 8 Nos. ₹ 38,570.00 ₹ 308,560.00

more, Low impedance RMS continuous power of 60watts, impedance : 8

or less,frequency range (-10dB) : 70 Hz - 20 kHz, frequency response

(±3dB) : 100Hz - 20KHz, Max SPL on 100v should be 105dB or more etc

complete required as per specifications.

Supply, Installation, Testing & Commissioning of Full HD PTZ

Camera supporting 1080p at 60 Frames per Second, minimum

12X Optical Zoom with FoV of 72 degree and minimum 255

presets. Camera should support simultaneous outputs through

7 Camera HDMI, USB 3.0, IP/3G-SDI, Audio In and can be controlled via 1 Nos. ₹ 455,600.00 ₹ 455,600.00

RS232/422 and IP. Panning angle -170° ~ +170° , Tilting angle -30°

~ +90. Camera should support SRT, PoE & should be compatible

with Virtual USB Driver. OEM should be BIS, CE, Clickshare, RoHS

& FCC Certified with test lab report supporting the certifications

Supply Installation Testing and Commissioning of surface-mount USB-to-

Dante endpoint, two-way volume and mute sync for Microsoft

Teams,compliant with CE and FCC, device shouold have Power-over-

Ethernet (PoE) to IEEE 802.3af Class 0 standard and support Dante

8 networking using standard CatX cable, device should support the 1 Nos. ₹ 195,500.00 ₹ 195,500.00

Speakerphone profile with and without echo cancellation, enable two-way

volume and mute syncronization with both PC and Mac platforms, Dante

with AES67 compliance,Sampling Rate(s) 48 kHz,should be from same

OEM as DSP etc complete required as per specifications.

Suppy Installation Testing and Commissioning of control system with

touch panel/Ipad, 100/1000 Mbps, auto-switching, auto-negotiating,

9 auto-discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, 1 Nos. ₹ 588,750.00 ₹ 588,750.00

CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS

140-2 compliant encryption

10 Supply, Installation, testing and commissioning of 16 port switch 1 Nos. ₹ 135,000.00 ₹ 135,000.00

Supply, Installation, testing and commissioning of HDMI RX extender

with complies with the advanced HDCP 2.2 and HDMI 2.0 standards,

uncompressed HD audio and video as well as control via a single run of

Cat.5e/6/7 cable over distances of up to 70 meters and upto 40mat 4K,

HDBaseT feature support: HD Video and Audio, and Control (IR/RS-232

pass-through) and CEC bypass, Supports pass-through of many audio

formats including LPCM (up to 8 channels), Bitstream and HD Bitstream

Digitally signed by AMIT

Supply, Installation, testing and commissioning of HDMI TX extender

complies with the advanced HDCP 2.2 and HDMI 2.0 standards,

uncompressed HD audio and video as well as control via a single run of

Cat.5e/6/7 cable over distances of up to 70 meters and upto 40mat 4K,

HDBaseT feature support: HD Video and Audio, and Control (IR/RS-232

pass-through) and CEC bypass, Supports pass-through of many audio

formats including LPCM (up to 8 channels), Bitstream and HD Bitstream

Supply, Installation, testing and commissioning of Cable cubby (1 HDMI,

1LAN,1 Charging socket)

Supply Installation Testing and Commissioning of HDMI Audio Extractor

should extract up to 2 channels of LPCM audio or 5.1 channels of

Bitstream audio from an HDMI source, allowing the user to convert high

quality HDMI audio into more convenient analog (LPCM 2.0 sources

only) or optical signals for use with powered speakers or non-HDMI AV

receivers. Both the input and output HDMI ports should support 4K UHD

14 resolutions up to 4K@60Hz (4:4:4, 8-bit) and should capable of 1 Nos. ₹ 93,100.00 ₹ 93,100.00

providing high quality audio and video performance. The unit should

supports passthrough of HD and standard Bitstream formats as well as

LPCM 7.1 with audio sampling rates up to 192kHz. Built-in EDID

management support allows the user select from multiple EDIDs and,

with the use of optional PC software, to upload, download, or edit EDID

files etc and complete as required

Supply, Installation, Testing & Commissioning of USB 3.2 Extenders.

Transmitter should have 1xUSB C input port, 1X RJ45, 1xUSB-A Output

Port. Receiver should have Input Port 1×Cat5e/6A/7 (RJ45). 1×USB-C,

15 USB Tx Rx 3×USB-A Output Port. Bandwidth upto 5Gbps (SuperSpeed), 1 Nos. ₹ 96,000.00 ₹ 96,000.00

Tranmission distance upto 100M. Devices should be controlable by the

USB host on a transmitter. Should have backward compatibility with USB

Supply, Installation, testing and commissioning of Eight HDMI inputs

matrixed to eight HDMI outputs with HDMI 2.0a specification and 18Gbps

(600MHz) 4K UHD support, HD resolutions up to 3840×2160@60Hz

8x8 HDMI (4:4:4, 8-bit) & 4096×2160@60Hz (4:4:4, 8-bit), 16-bit Deep Color up to

Switcher 1080p@60Hz. Eight Audio output ports can pair with eight HDMI outputs

individually. Audio support Digital and analog Formats. Device should be

provides an intuitive set of front panel controls with an LCD as well as RS-

232, Telnet, WebGUI, and IR remote control options.

17 Cables Cables & connectors 1 LS ₹ 150,000.00 ₹ 150,000.00

Digitally signed by AMIT

Supply, Installation, Testing and Comissioning of 85" or larger LED

display. Brightness -400nits or better, Resolution- 4K UHD or better,

Viewing Angle (H/V) - 178/178 or better, Contrast Ratio - 4,000:1 or

better, Ports - Minimum 2 x HDMI, 1 xDisplay port, 2xUSB, 1 x RJ45,

1xRS232 or more. Bluetooth and WiFi connectivity options. With

standard accessories and suitable MS wall mounting bracket.

Supply, Installation, testing and commissioning of Ceiling microphone

with automatic dynamic Beamforming technology, The beam will

automatically detect the position of the person speaking and will follow

the person around the room at all times. It should have 2 x Dante digital

audio (Redundancy), Analog audio out (Phoenix 3-pin), and Ethernet for

Control and PoE connectivity ports. The coverage of the ceiling

microphone should be min 800 square feet or more. It should have a true

Ceiling voice lift feature to increase audio intelligibility above the ambient noise

microphone floor. It should support IT industry standards like IEEE 802.1x. It can be

controlled through software that can control and monitor the microphone

in any network. It should have min 100 dB SPL, 5ms latency, and min

90dBA or higher dynamic range. High-precision audio settings for

maximum control, setting to exclude (min 5) and prioritize the areas of

the room. It should certified from Microsoft Teams and Zoom Video

conferencing applications. It should have UL 62368 certification

(including UL 2043 testing and compliance) and safety certifications.

Supply, Installation, Testing & Commissioning of Open Architecture

Digital Signal Processor with 4 Mic/Line Input with Phantom Power and 4

Line Output. GPIO Ports - 8x8 or better. AEC channels - 8 or more with

200ms tail length.Minimum 8x8 Dante channels and support for up to

64x64 Network audio channels via Dante /AES67 or similar protocol. SIP

Digital Signal Softphone integration for Audio conferencing. USB-B & C port supporting

Processor AV USB Bridging for software or web-based conferencing applications

emulating USB Audio (Speakerphone) and USB Video (Camera) driver.

24 bit-A/D-D/A converters or better, 48 kHz Sample rate or better, Input

frequency response of 20 Hz to 20 kHz or better, Input dynamic range >

109 dB or better. RS232 Ports - 2 or more. The processor should

support Network amplifiers without any additional cards or accessories.

Digitally signed by AMIT

Supply, Installation, Testing & Commissioning of Quad Channel Class-D

amplifier. Per Channel Power 60W @8Ω/4Ω or better. Support for

70V/100V or more. Power Sharing or Bridge/Parallel modes for better

power distribution. Frequency Response- 20 Hz – 20 kHz or better.

Signal to Noise ratio -> 103 dB or better, Input impedance - >10k,

balanced or unbalanced or better, Front and Rear panel indicators for

Power, signal (per channel), limit / mute / protect etc. or better. Better to

have Remote standby and Power saving features - Auto-standby.

Supply, Installation, testing and commissioning of 6.5" two-way coaxial

thin edge ceiling loudspeaker having 100V transformer power taps from

60watts to 15watts or better it should have metal back can for premium

5 performance in demanding applications, Conical dispersion : 142° or 4 Nos. ₹ 38,570.00 ₹ 154,280.00

more, Low impedance RMS continuous power of 60watts, impedance : 8

or less,frequency range (-10dB) : 70 Hz - 20 kHz, frequency response

(±3dB) : 100Hz - 20KHz, Max SPL on 100v should be 105dB or more etc

complete required as per specifications.

Supply, Installation, Testing & Commissioning of Full HD PTZ Camera

supporting 1080p at 60 Frames per Second, minimum 12X Optical Zoom

with FoV of 72 degree and minimum 255 presets. Camera should

support simultaneous outputs through HDMI, USB 3.0, IP/3G-SDI, Audio

6 Camera In and can be controlled via RS232/422 and IP. Panning angle -170° ~ 1 Nos. ₹ 315,000.00 ₹ 315,000.00

+170° , Tilting angle -30° ~ +90. Camera should support SRT, PoE &

should be compatible with Virtual USB Driver. OEM should be BIS, CE,

Clickshare, RoHS & FCC Certified with test lab report supporting the

certifications.

Supply Installation Testing and Commissioning of surface-mount USB-to-

Dante endpoint, two-way volume and mute sync for Microsoft

Teams,compliant with CE and FCC, device shouold have Power-over-

Ethernet (PoE) to IEEE 802.3af Class 0 standard and support Dante

7 networking using standard CatX cable, device should support the 1 Nos. ₹ 195,500.00 ₹ 195,500.00

Speakerphone profile with and without echo cancellation, enable two-way

volume and mute syncronization with both PC and Mac platforms, Dante

with AES67 compliance,Sampling Rate(s) 48 kHz,should be from same

OEM as DSP etc complete required as per specifications.

Suppy Installation Testing and Commissioning of control system with

touch panel/Ipad, 100/1000 Mbps, auto-switching, auto-negotiating,

8 auto-discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, 1 Nos. ₹ 588,750.00 ₹ 588,750.00

CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS

140-2 compliant encryption

Digitally signed by AMIT

9 Switch Supply, Installation, testing and commissioning of 16 port switch 1 Nos. ₹ 85,000.00 ₹ 85,000.00

Supply, Installation, testing and commissioning of HDMI RX extender

with complies with the advanced HDCP 2.2 and HDMI 2.0 standards,

uncompressed HD audio and video as well as control via a single run of

Cat.5e/6/7 cable over distances of up to 70 meters and upto 40mat 4K,

HDBaseT feature support: HD Video and Audio, and Control (IR/RS-232

pass-through) and CEC bypass, Supports pass-through of many audio

formats including LPCM (up to 8 channels), Bitstream and HD Bitstream

Supply, Installation, testing and commissioning of HDMI TX extender

complies with the advanced HDCP 2.2 and HDMI 2.0 standards,

uncompressed HD audio and video as well as control via a single run of

Cat.5e/6/7 cable over distances of up to 70 meters and upto 40mat 4K,

HDBaseT feature support: HD Video and Audio, and Control (IR/RS-232

pass-through) and CEC bypass, Supports pass-through of many audio

formats including LPCM (up to 8 channels), Bitstream and HD Bitstream

Supply, Installation, testing and commissioning of Cable cubby (1 HDMI,

1LAN,1 Charging socket)

Supply Installation Testing and Commissioning of HDMI Audio Extractor

should extract up to 2 channels of LPCM audio or 5.1 channels of

Bitstream audio from an HDMI source, allowing the user to convert high

quality HDMI audio into more convenient analog (LPCM 2.0 sources

only) or optical signals for use with powered speakers or non-HDMI AV

receivers. Both the input and output HDMI ports should support 4K UHD

13 resolutions up to 4K@60Hz (4:4:4, 8-bit) and should capable of 1 Nos. ₹ 93,100.00 ₹ 93,100.00

providing high quality audio and video performance. The unit should

supports passthrough of HD and standard Bitstream formats as well as

LPCM 7.1 with audio sampling rates up to 192kHz. Built-in EDID

management support allows the user select from multiple EDIDs and,

with the use of optional PC software, to upload, download, or edit EDID

files etc and complete as required

Supply, Installation, Testing & Commissioning of USB 3.2 Extenders.

Transmitter should have 1xUSB C input port, 1X RJ45, 1xUSB-A Output

Port. Receiver should have Input Port 1×Cat5e/6A/7 (RJ45). 1×USB-C,

14 USB Tx Rx 3×USB-A Output Port. Bandwidth upto 5Gbps (SuperSpeed), 1 Nos. ₹ 96,000.00 ₹ 96,000.00

Tranmission distance upto 100M. Devices should be controlable by the

USB host on a transmitter. Should have backward compatibility with USB

Digitally signed by AMIT

Supply, Installation, testing and commissioning of Four HDMI inputs

matrixed to Four HDMI outputs with HDMI 2.0a specification and 18Gbps

15 (600MHz) 4K UHD support, HD resolutions up to 3840×2160@60Hz 1 Nos. ₹ 255,000.00 ₹ 255,000.00

(4:4:4, 8-bit) & 4096×2160@60Hz (4:4:4, 8-bit), 16-bit Deep Color up to

16 Cables Cables & connectors 1 LS ₹ 50,000.00 ₹ 50,000.00

Screen Size (Diagonal) Minimum (cm) - 189, Back Light Type /

Technology - LED Backlit/Edge LED/Direct LED, Screen TypeNon

Touch, Panel Technology / Type - In Plane Switching (IPS) / VA, Native

Resolution (Pixels) - 3840 x 2160 (UHD), Aspect Ratio - 16:9, Brightness

(Nits) Minimum - 400, Viewing Angle (Horizontal:Vertical) -178:178,

Response Time (Maximum) (milli seconds) - 8, Bezel width (Maximum)

(mm) - "Top,Left,Right : 16, Arrangement of Speakers - Inbuilt,

Combined Wattage of inbuilt Speakers Minimum (Watt) - 20,

Connectivity Input Ports - Minimum ((3 HDMI 2.0 ports) or (2 HDMI 2.0

1 75 inch Display ports + 1 Display Port with Audio/ DVI-D port),1 USB port), RS 232/232C 1 Nos. ₹ 235,000.00 ₹ 235,000.00

Port - 1 (In/Out), RJ 45 Port – 1, Built-In Wi-Fi - Yes, Power

Consumption in Operating Mode (Maximum) (Watt) – 285, Power

Consumption in Sleep Mode (Maximum) (Watt) - 0.5, Duty Cycle /

Working hours - 24 x 7, Power Supply - AC 110 V - 240 V, 50/60 Hz,

Weight without stand (Maximum) (Kg) – 45, Accessories to be supplied :

AC Power cord, remote control, user manual, wall mount bracket,

necessary cables, HDMI (4K) and connectors - Yes All display units

supplied should have Minimum (3 HDMI ports, 1 Display Port / DVI port,

1 Audio Input for PC,1 USB port

Digitally signed by AMIT

Supply, Installation, testing and commissioning of Unified communication

bar with BYOD, Built-in dante integration, Should have Built-In DSP

which automatically optimizes room acoustics, Integrated Beamforming

microphone, 6 Nos. of MEMS capsules with pickup range of 4.5m or

more, Should have 4K ePTZ camera, 5x digital zoom with automatic

framing and person tiling feature, Built-in Class D amplifier with 4 Nos. of

2 Video Bar 40W full range speaker, should have 2 x HDMI, 1 x USB Type-C(3.1), 1 x 1 Nos. ₹ 382,900.00 ₹ 382,900.00

USB Type-A(3.1), 2 x1000/100/10 Mbit/s (RJ45) ethernet ports, 5.1

bluetooth and IEEE 802.11a /b /g /n /ac Wi-fi standard, Zooms and

Teams certified, High-precision audio settings for maximum control,

setting to exclude (min 3) and prioritize the areas of the room, should be

controlled through centralized monitoring software along with IR remote

control and mounting kit.

Supply, Installation, testing and commissioning of Ceiling microphone

with automatic dynamic Beamforming technology, The beam will

automatically detect the position of the person speaking and will follow

the person around the room at all times. It should have 1 x Ethernet port

for Control + PoE + Dante and Analog audio out (Phoenix 3-pin)

Expansion connectivity ports. The coverage of ceiling microphone should be min

3 Ceiling 400 square feet or more. It should have true voicelift feature to increase 1 Nos. ₹ 496,250.00 ₹ 496,250.00

Microphone audio intelligibility above ambient noise floor. It should support IT industry

standards like IEEE 802.1x and TLS 1.2. It can be control through

software which can control and monitor the microphone in any network. It

should have High-precision audio settings for maximum control,setting to

exclue(min 5) and pritorize the areas of room. It should have IEC/EN

62368-1 (including UL 2043 testing and compliance) safety certifications.

4 Cables Cables & connectors 1 LS ₹ 50,000.00 ₹ 50,000.00

Total AV Works ₹ 18,178,912.45

Digitally signed by AMIT

Schedule of Quantites: ACCESS CONTROL

S NO DESCRIPTION UNIT QUANTITY Rate DSR Amount NDSR Amount

Supply, Installation, Testing and Commisioning of Face detection Reader

with Supports smart RFID Cards technologies mifare/Desfire, Face

Capacity: 1000 minimum and upgradable, Reliable Face Recognition

1 Technology, 25-30 persons can punch in the reader in less than a Nos 6 46,039.00 276,234.00

minute,Ethernet connectivity for reliable communication, USB Host Data

Transfer Complete all as per the RFP Specifications and Approval of

Engineer In-charge.

1 Digitally signed by AMIT

Supply, Installation, Testing & Commissioning of Web based Access Control

and T&A software with Intrusion and Alarm Managment Features. software

should offer a comprehensive solution for managing biometric devices, card

readers, QR Reader, Bluetooth Readers, NFC Readers and access

controllers. It should enable users to enroll individuals' biometric data and

controller information within a single enrollment process. This ensures

convenience and efficiency for system administrators. Additionally, the

software should support modules such as Access Control, Time &

Attendance,Visitor Management, Vehicle Access Management, Mobile

based Attendance, Guard Tour Management, and other relevant

functionalities, all utilizing the same database, No separate database for any

of the module will be allowed except third party Integration if required, This

promotes future scalability and streamlined data management , The Time &

Attendance software provides a comprehensive set of flexible functions to

meet various organizational requirements. These functions include the ability

to manage multiple organizations, implement late-in and early-out policies,

define overtime policies, handle absenteeism, manage multiple holidays and

holiday schedules, manually enter and correct entry-exit events, and

generate attendance summaries. These functions offer versatility in

managing and monitoring employee attendance effectively. Software should

be a certified that meets the ISO 9001:2015 (Quality Management Systems),

ISO 14001:2015 (Environmental Management Systems), and ISO

27001:2013 (Information Security Management Systems) standards. These

certifications validate the Software adherence to internationally recognized

standards in quality, environmental responsibility, and information

security.The Software shall have "Vulnerability Assessment Security Closure

Report of Access Control and Time and Attendance Software" along with

Audit Certificate should be issued Cert-In Empanelled government

Organizations CDAC/STQC etc. Integration is required with the existing

system of client at their existing office and nothing extra shall be paid for the

2 Digitally signed by AMIT

Supply, Installation, Testing & Commissioning of Access IP Controller with

Enclosure and Power Supply Unit : 2 Door 4 Reader with RS485 OSDP,

Security Features: Authorized IP address filtering, IP Client Proxy Host

communications protected by TLS 1.2/1.1 or AES 128/256 bit data

encryption for optimal data protection, Crypto memory chip, IO Expansion

connection protected by AES Capacity: Cards/Users : 240000 Offline Event

Log: 5,0000 & Communications Built in TCP/IP, IPV4, IPV6, RS-485,

Inputs: Seven unsupervised/supervised, Two unsupervised dedicated for

cabinet tamper and UPS fault monitoring, Outputs: Four relays, Power : 12

to 24 Vdc 10 %, 500 mA maximum , Supports up to 520 inputs and 516

outputs, 16 card formats per active reader, 8 per offline reader, Open

Supervised Device Protocol (OSDP) and OSDP SC compliant, Anti-

passback support, Area-based, reader-based, or time based Nested area,

hard, soft, or timed forgiveness, Encrypted database, Supports up to

nineteen (19) digit card numbers, Intrusion Alarm Functions: Area

monitoring, Standard alarm masking , Fire Integration; open all doors from

hardware itself, Temperature: -55 to +85 °C, storage, 0 to +70 °C, operating,

Humidity: 5 to 85 % RHNC, Micro USB Port, SD card upto 8 GB.

Certifications and Compliances:UL294 Recognized, FCC Part 15 Subpart B,

CE Compliant, RoHS, NIST Certified Encryption etc. as per specifications of

this tender etc complete as required and directions of Engineer-in- Charge.

Supply, Installation, Testing & Commissioning of 12V, 5 Amp. SMPS with

MS Box Certified .

Supply, Installation, Testing & Commissioning of Smart card Mifare smart

Card , distance upto 2.5" Memory Type EEPROM, 1K bit memory Complies

5 with ISO/IEC standards for thickness. Lifetime Warranty .etc. as per Nos 100 220.00 22,000.00

specifications of this tender etc complete as required and directions of

Engineer-in- Charge.

Supply, Installation, Testing & Commissioning of Electro Magnetic Lock

Double Leaf as per door design, Fail safe type, Holding force:

272kg(600lbs), Inbuilt Door contact , Current Drain:320mA/12VDC, Built-in

voltage spiker suppressor to protect the lock body and equipments, lock

6 body and armature with chemical plating anticorrosion finished, With LED Nos 5 12,563.00 62,815.00

light & Compatiable brackets (L/U/ZL), Bracket shall included as per door's

design only, CE Certified etc. as per specifications of this tender etc

complete as required and directions of Engineer-in- Charge.

3 Digitally signed by AMIT

Supply, Installation, Testing & Commissioning of Electro Magnetic Lock

Single Leaf as per door design, Fail safe type, Holding force: 272kg(600lbs),

Inbuilt Door contact , Current Drain:320mA/12VDC, Built-in voltage spiker

suppressor to protect the lock body and equipments, lock body and

7 armature with chemical plating anticorrosion finished, With LED light & Nos 5 9,648.00 48,240.00

Compatiable brackets (L/U/ZL),Bracket shall included as per door's design

only, CE Certified etc.as per specifications of this tender etc complete as

required and directions of Engineer-in- Charge.

Supply, Installation, Testing & Commissioning of Stainless Steel SS 304

8 Grade, Push Button, Heavy Duty Material , NO, NC Based, 4 Amp @125 Nos 13 3,518.00 45,734.00

Supply Installation Testing and Commissioning of 8 Core -conductor20 to 22

Supply Installation Testing and Commissioning of AC 3 Core Plain

Copper conductor, PVC insulated.

Supplying and fixing of following sizes of medium class PVC conduit

along with accessories in surface/recess including cutting the wall

11 and making good the same in case of recessed conduit as required Metre 500 201.00 100,500.00

4 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - FIRE ALARM

S NO DSR/MR DESCRIPTION UNIT RATE AMOUNT AMOUNT

DSR RATE NON DSR

SITC of UL268 10th edition compliance and FM approved Intelligent Addressable multi-

criteria detector (optical and thermal sensors) complete with standard base, facility to mount

in different comprehensive environment, Tri-color detector-status LED with 360 °

view, microprocessor circuitry with error check; detector self-diagnostics and

supervision programs,Rate-of-Rise Detection: 15°F / min. (8.3°C / min.) - Fixed: 135°F

(57°C) , Field programmable as rate-of-rise or fixed temperature, Polarity insensitive,

Superior EMI and RFI immunity, RoHS compliant. Detector shall have in-built isolator for

better reliability, circuit integrity and advanced fault finding. Manufacturers not having

in-built Isolator feature in detector shall consider Isolator base in place of standard

base OR separate Isolator before and after every detector to comply the same

without any extra cost. It shall be includesurface/recessed MS Box complete with all

connections etc as required.

Supplying, installation, testing & commissioning of response indicator on surface/recessed

MS Box having two LED, metallic cover complete with all connections etc as required.

SITC of UL Listed and FM approved Intelligent Addressable Rate of Rise and

Fixed temperature detector complete with standard base, Seven (7) field-selectable

settings in a temperature range of 135°F – 174°F (57.2°C – 78.9°C) , a low-

temperature warning of 40°F (4.4°C), facility to mount in different comprehensive

environment, Tri-color detector-status LED with 360 ° view, microprocessor circuitry with

error check; detector self-diagnostics and supervision programs, Field programmable

as rate-of-rise or fixed temperature, Polarity insensitive, Superior EMI and RFI

immunity, RoHS compliant. Detector shall have in-built isolator for better reliability,

circuit integrity and advanced fault finding. Manufacturers not having in-built Isolator

feature in detector shall consider Isolator base in place of standard base OR separate

Isolator before and after every detector to comply the same without any extra cost.

SITC of UL Listed Sounder cum Strobe rated at 75 dBA @ 3m for Audible

annunciation and 75cd flashintg at 1 Hz for visual indication.

SITC of UL listed and FM approved Intelligent addressable Class X type (Style 7),

Control Module with built in dual isolator, polarity insensitive, Tri color LED for status

(Green for Normal,Yellow for Faulty and RED for activation), Operating Temp and RH:

0-49 deg C and <=95%. Module shall have in-built isolator for better reliability, circuit

integrity and advanced fault finding. Manufacturers not having in-built Isolator feature

shall provide separate Isolator before and after every Module to comply the same without

any extra cost.

Supplying, (For AHU &testing

installation, Staircase& Pressurization

commissioningFans,ofHooters/ Sounders/

addressable Strobes

module complete as required.

SITC of UL listed and FM approved Intelligent addressable Class X type (Style 7),

Monitor Module with built in dual isolator, polarity insensitive, Tri color LED for status

(Green for Normal,Yellow for Faulty and RED for activation), Operating Temp and RH:

0-49degC and <=95%. Module shall have in-built isolator for better reliability, circuit

integrity and advanced fault finding. Manufacturers not having in-built Isolator feature

shall provide separate Isolator before and after every Module to comply the same without

any extra cost. (For Flow Switch Monitoring/ Gass suppresion Integration etc.)

1 Digitally signed by AMIT

SITC of UL268 10th edition compliance and FM approved Intelligent Addressable Duct

detector with 10ft sampling pipe (optical and thermal sensors) complete with standard

base, facility to mount in different comprehensive environment, Tri-color detector-status

LED with 360 ° view, microprocessor circuitry with error check; detector self-

diagnostics and supervision programs,Rate-of-Rise Detection: 15°F / min. (8.3°C / min.) -

9 MR Fixed: 135°F (57°C) , Field programmable as rate-of-rise or fixed temperature, Polarity Nos 4.00 19,551.00 78,204.00

insensitive, Superior EMI and RFI immunity, RoHS compliant. Detector shall have in-built

isolator for better reliability, circuit integrity and advanced fault finding. Manufacturers

not having in-built Isolator feature in detector shall consider Isolator base in place of

standard base OR separate Isolator before and after every detector to comply the same

without any extra cost.

SITC of UL listed and FM approved Intelligent addressable Class X type (Style 7),

Manual Pull Station Single Action, Shock and Vibration Resistant, with built in dual

isolator, polarity insensitive, Tri color LED for status (Green for Normal,Yellow for

Faulty and RED for activation), T-45 Key Reset lockset for easy maintenance, Operating

Temp and RH: 0-49degC and <=95%. MCP shall have in-built isolator for better reliability,

circuit integrity and advanced fault finding. Manufacturers not having in-built Isolator

feature shall provide separate Isolator before and after every MCP to comply the same

without any extra cost.

Supplying, installation, testing & commissioning of One controller supports 12 zones,

11 MR expandable up-to 492 zones with 24-zone routers, Control and routing of 4 simultaneous Nos 1.00 379,832.00 379,832.00

audio channels,EN 54-16 system certification

SITC of Call station with soft touch button 15 freely programmable buttons,Customization via

12 MR built-in display and keys, Provision for installing emergency button and key switch,EN 54-16 Nos 1.00 178,560.00 178,560.00

system certification etc all required

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete

Supplying, installation, testing & commissioning of Power amplifier, 480W,Multiple outputs

- 70 V / 100 V and 8/4 ohm, Temperature controlled forced front to back ventilation, directly

stackable, Mains, battery back-up, and pilot tone supervision, Dual inputs with priority

switching complete as required.

Supplying & laying of 2x1.5 sqmm fire alarm FS armoured cable, 600/1000V rated

15 MR with annealed copper conductor having XLPE insulation, steel wire armouring & FS Mtr 1,620.00 254.00 411,480.00

outer sheath complete as required

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable

in the existing surface / recessed steel conduit of following pairs, cores and

size including connections and interconnections etc. as required.

Supplying and Laying of 2x1.5sqmm FS unarmourd cable

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries

and accessories like coupler etc. as required.

Supplying & Fixing of battery operated illiminated "EXIT" signage, with 2hrs power

Battery backup complete as required.

SITC of Remote Paging Microphone should be fully digital connected via CAT6 Cable

with Controller. The Microphone should have capability to make announcement in 96

Zones and have all call facility. The Microphone shall have ability to control music and should

be able to route the music in zones. Microphone should have maximum zones capacity up to

19 MR 120 Zones. The Microphone should have LED indication for the different faults, the Nos 1.00 160,930.00 160,930.00

unit shall be able to indicate AC, DC, Fault, Mic and Test status through LED.. The Unit

shall have 2 RJ45 ports for Microphone so that the other microphone shall be able to

link with the unit. The Microphone shall have ability to Communication limit up to 600

2 Digitally signed by AMIT

Supply, Installation, Testing and Commisioning of Interface Card for BMS fire

integration compatible with exisiting system

Supply, Installation, Testing and Commisioning of repeater panel having 160 character

display with backlit control compatible with existing system

SITC of UL864 10th Edition UL Listed and FM approved Analog Addressable 4 Loop

Fire Alarm control panel. Panel shall be running on full digital protocol with 32 bit

Microprocessor . The Panel shall be complete with 6" color touch screen LCD Display. Fire

alarm panel should have minimum capacity of 2500 detectors and devices in any

combination and capable of making upto 50 loops in single panel using additional

Loop cards. Each addressable loop shall be capable of taking 250 addresses per loop

configuring either as all detectors or modules or any mix of both. The panel shall

have the Fire Fighter Touch Screen Graphical Display panel to inform & guide Fire

Fighters for carrying out Fire Fighting operations. The display shall have Hazmat

icons indicating the presence of any explosive gas, liquids, poison,fumes etc. If

22 MR this feature is not available in fire alarm panel then additional fire fighter touch panel Nos 1.00 444,220.00 444,220.00

along with necessary hardware and software should be provided by the

manufacturers for fire fighters to guide them during emergency without any extra cost.

To expedite system troubleshooting, the system cards shall have ground fault

detection and diagnostic LEDs by card. In the display,simple building floor plan can be

loaded in bitmap or jpeg format, On the map, the user will see an icon indicating the

location of the event in the building in addition to a 'You-Are-Here' symbol to tell the

responding person exactly where they are in the building in relation to the event. The system

shall be polarity insensitive. The panel shall support degrade mode operation and shall

have battery backup of 24 hrs in normal condition and 30 minutes in Alarm condition.

3 Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FIRE PIPING, HYDRANTS, SPRINKLERS AND ACCESSORIES

S No DSR 2022/ DESCRIPTION QTY UNIT RATE TOTAL DSR Amount after TOTAL AMOUNT

S No DSR 2022/ DESCRIPTION QTY UNIT RATE TOTAL DSR Amount after TOTAL AMOUNT

MR AMOUNT GST Multiplication

DSR (INR) factor@ 1.0633 NON-DSR (INR)

Providing, laying, testing & commissioning of 'C' class

heavy duty MS pipe conforming to IS 3589/IS 1239

including Welding, fittings like elbows, tees, flanges, tapers,

18.7 nuts bolts, gaskets etc. and fixing the pipe on the

1 wall/ceiling with suitable clamp/support frame and painting

with two or more coats of synthetic enamel paint of required

shade complete as required :

Providing, fixing, testing & commissioning of 15mm dia

18.21 quartzoid bulb type sprinklers of rating 68 degree centigrade

with required accessories :

Supplying, installation, testing & commissioning of sprinkler

flexible pipe (UL Listed) of stainless steel complete with 15

NPT on reducer thread with maximum working pressure of

175 PSI test pressure of 875 PSI (Burst) with branch line

3 18.25 (Inlet) 25mm NPT male thread to sprinkler head (Outlet)

15mm NPT female thread with reducer, nipple, 2 side

brackets, center bracket, stockbar of following sizes

complete as required.

Providing and fixing ISI Marked of approved make Fire

4 Extinguishers complete with all accessories as per

manufacturer's specifications.

a) CO2 gas nozzle type - 9 Litre capacity (IS:15683). 4 NOS 12912.00 51648.00

Mechanical Foam gas cartridge type. 9 Kg capacity

ABC dry powder stored pressure type 6 kg capacity

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: LANDSCAPE

S NO DSR/MR Description Unit Qty Rate DSR Amount Non DSR Amount

Supply of full soil fill conical shaped planters of

specified volume and dimensions in stone finish or

equivalent. planters to be indigenously made by

rotational moulding, with homogeneous recyclable,

industrial grade polymer-resin mix, and textured

surface. planters should have an integrated water

outlet hole & plug, single layered peel-proof

1 construction, light weight, rust proof, uv stabilized,

MR anti-frost feature without any joints, and easy to

clean. planter supplier must give 1 year warranty

against any fading or cracking for both indoor and

outdoor use. green plant and laying is extra.

potting instructions as per company catalogue.

Supply of double layered translucent backlit

cylinderical shaped - hand carfted pattern planters

of volume 40 ltr; approx. dimension 40(h)x18.5(d)

in granite/ stone/ solid finish or equivalent.

planters to be indigenously made by rotational

moulding, with homogeneous 100% recyclable,

industrial grade polymer-resin mix, with textured

surface and stone match finishes. planters to have

concealed shock resistant back lighting system

with secured supply wire and an integrated water

outlet hole & plug, peel proof construction,

asbestos free, light in weight, without any joints,

rust proof, uv stabilized, anti-frost feature and easy

to clean. planter supplier must give 1 year warranty

against any led, fading or cracking for indoor and

Plantation: Supply and installation of Natural Plant

with sand, fertilizer etc.

1 Digitally signed by AMIT

Providing & fixing Artificial silk plants

with combination 3 or 4 types uniformly

distributed plants as ceiling suspended

creepers with necessary wire or hanging

arrangement included. Plants which ultraviolet

blocking chemicals are impregnated into the

materials during the manufacturing process.

These chemicals are blended with the plastic or

PVC parts Installation . Suspended creepers shall

be installed in laminated finish trays duly

suspended from the ceiling with twisted rods of

size and design as per the detailed drawings

2 Digitally signed by AMIT

SCHEDULE OF QUANTITIES: GAS SUPPRESSION SYSTEM

S No Description Unit Qty Rate DSR Amount NDSR Amount

Supply, Installation, Testing and Commissioning of 80 ltrs

Seamless Cylinder with Valve with all accessories( Pressure Guage

+Low pressure supervisory switch,Low Pressure Connection Tee

Cable, Pneumatic actuator, Manual Actuator, Flexible Discharge

Hose, Tee, Check Valve, Flexible Actuation Hose, Pressure Switch

for gas release input, Low Pressure Connection Unit, Connection

kit for End of Line, Elbow), Sinorix FK5112 gas, Electromagnetic

A Actuator, Discharge Nozzles Drilled for 360 degree covereage,

M.S. Seamless pipes as per ASTM A 106 Gr. B, schedule 40 with

necessary fittings, Manifold for Cylinders , Cylinder MOUNTING

WLL CLAMP, DNE (Don’t Enter Gas released) Sign board, GRE

(Gas release Exit) Sign board, Gas Release Panel, Gas Abbort

Switch, Gas Relase Switch, Sounder cum Strobe

1 Digitally signed by AMIT

SCHEDULE OF QUANTITIES: VESDA

S No Description Unit Qty Rate DSR Amount NDSR Amount

1 Vesda Laser Focus Panel VLF 250 xtralis Nos. 2 252,000 504,000.00

2 Power Supply for above panels Nos. 2 42,500 85,000.00

3 Capillary set Nos 6 14,870 89,220.00

5 25 mm dia 2 mm thickness pipings Lot 2 10,000 20,000.00

6 Electronic Hooter Cum Strobe Nos. 2 1,200 2,400.00

Total Basic Amount (INR) 758,220.00

1 Digitally signed by AMIT

SCHEDULE OF QUANTITIES: RODENT & WLD SOLUTIONS

S No Description Unit Qty Rate DSR Amount NDSR Amount

RODENT SOLUTIONS FOR SERVER ROOM

1 Master Console Panel Capable of connecting to 12 Sattleites complete Nos. 2 28,600.00 57,200.00

2 Satellite Detector units complete as required Nos 18 1,680.00 30,240.00

3 Wire Bundles 2 core complete as required and as per specifications. Set 2 5,000.00 10,000.00

4 Bracket Stand complete as required and as per specifications. Nos. 1 4,500.00 4,500.00

1 Digitally signed by AMIT

SCHEDULE OF QUANTITIES: RODENT & WLD SOLUTIONS

S No Description Unit Qty Rate DSR Amount NDSR Amount

WATER LEAK DETECTION FOR SERVER ROOM

Supply of 4 Zone microprocessor based water leak detection panel with Nos

inbuilt keypad and LED indications of the zones in alarm or fault

2 water leak detection cable Nos 40 2,388.00 95,520.00

3 Electronic hooter Nos 2 1,200.00 2,400.00

1 Digitally signed by AMIT

DETAILED ESTIMATE FOR PROPOSED CONSTRUCTION OF GAIL OFFICE , NEW DELHI

ABSTRACT OF COST

I.NO DSR CODE DESCRIPTION UNIT QTY RATE DSR AMOUNT NDSR AMOUNT

1 MR Providing, fabricating and fixing of SS 1.5 inches of required Each 3 45,977.00 137931.00

size and shape with arrangement of screws in the letters itself

for mounting on the walls or pasting using 3M VHP Tape.

Fixing complete as per directions of the engineer. The Sizes

would be calculated in Sqft as per Logo Design provided.

Tentative Size 42"X60"

2 MR Providing, fabricating and fixing of 3D Acrylic Letters raised 1.5 Each 2 35,977.00 71954.00

inches of required size and shape with arrangement of screws

in the letters itself for mounting on the walls or pasting using 3M

VHP Tape. Fixing complete as per directions of the engineer.

The Sizes would be calculated in Sqft as per Logo Design

Tentative Size 42"X60"

2 MR NAME SIGNAGE CHANGEABLE (All Floors)

Providing and fixing of Acrylic signage made of 3mm Acrylic Each 35 3,500.00 122500.00

with textured wood finish pasted /White milky acrylic 3mm laser

cut pasted on top with proper names & room numbers/

Departments written using plottercut vinyl or laser cut acrylic

letters in approved colour.Inserting provision for changing

names .Fixing provision using 3M VHP double sided tape as

Signage Size 12x5 inch

3 MR FIRE EVACUATION MAP / SIGN.

Providing and fixing of Clear Acrylic sandwich frame of 3mm & Each 21 2,673.00 56133.00

2mm acrylic with Evacuation Plan Printed on photoluminescent

media and inserted between the two frames. Should be fixed on

the wall using 4 Screw/ SS studs. Size 12 inch x 17 inch

4 MR FIRE ESCAPE EDGE-LIT SIGNAGE

Providing and fixing of Edge-Lit signage with battery backup. Each 18 3,289.00 59202.00

Made from acrylic sheet of 8 mm thickness laser engraved,

Transformer to be inbuilt. Maintenance - free sealed nickel

cadmium battery included • 120V/277V AC Operation • Crystal

clear acrylic face panel• Engraved letters increase visibility •

Anodized aluminum faceplate • Field applied chevron

directional indicators simplify installation • Long life, energy-

saving LED lamps • Dual-voltage 120V/277V AC Operation •

UL listed. To be installed at stairs entry. Size 310mm x 175mm

5 MR FIRE SAFETY SIGNAGE

Providing fabricating and fixing of signage 05 mm thick Acrylic / Each 30 535.00 16050.00

Sun board sheet at base with photoluminescent film self

adhesive & colored vinyl ( Red/Green) Plotter cut and pasted on

top. Both side / Single Side facing Complete including fixing on

wall with screws and washers or hanging on ceiling with GI

chain/GI Bar complete as per technical specifications and

directions of Engineer.

Photoluminescent signages

MR DESCRIPTION QUANTITY

S NO UNIT RATE AMOUNT

Supply of Minimum 330 Litre minimum 3 star Double Door Refrigerator

with Cooling Plus Technology

Supply of Single door Minimum 2 star smart Refrigerator of capacity

minimum 45 Ltr., Direct Cool Refrigerator.

Supply of 28/30 Liter all in one Microwave Oven Charcoal Lighting

3 MR Heater 30 Healthy Heart Auto Cook Menu, Motorised Rotisserie having Nos 18 17500 315000.00

maximum power consumption of 2000 Watt.

Supply of minimum 55 Liter Digital oven grill toaster tempreture &

heating element for opti-tempreture technology Rotisserie having

maximum power consumption of 2000 Watt, cavity material of stainless