Renov. of Ratu Road UWSS by repl. of old 120 HP HSC P. sets by new pump sets having dis.910 m cube against head of 50 m in the lower pump house incl. making and fabricating 350 mm MS suction pipe, 250 mm MS delivery pipe, supply and fit. valves etc

Amount

Supplying, Installation, Testing & Commissioning of pump Set

Making arrangements for dismantalling of 120 HP old pump & motor by disconnecting its suction & delivery pipe, existing starter by disconnecting electric cables properly & taking out from the pump house, making arrangement to carry all the taken out materials from pump house to local departmental store including providing transportation & all required tools, tackles, labours, technicians etc. all complete [ Pump Set No (1) & Set No. (2). ]

Supplying, Installation, Testing and Commissioning of Horizontal Split Casing centrifugal pump sets [ Make- Kirloskar/Jyoti/WPIL/ Wilo-Mather & Platt ] with SS/bronze impeller capable to discharge 910 m³/h against a total head of 50 meters mounted on a common M.S. base plate and coupled with TEFC IE3 type Squirrel Cage Induction motor [ Make-Kirloskar/Crompton/ABB/Siemens ] operating on 3-phase, 50 Hz, 415V+-10% AC supply and having speed 1400-1500 RPM of suitable size i.e. BHP of motor must be 10% above than that of pump set; including cost of supplying, fitting & fixing of all required accessories such as Kirloskar/IVC/IVI make C.I.D.F. Sluice Valve PN 1.6, C.I.D.F. N.R. Valve PN 1.6, Foot Valve of suitable size & length of MS suction pipe 20 ft (Approx. dia 350mm), with required fittings like bends, short pieces, flanges & welding wherever needed including dismantling of existing PCC foundation, disposal of taken out unservicable materails & rubbish with all leads & making new RCC foundation of required size providing all labours, materials, tools & tackles all complete as per E/I.

Supplying, fabricating, welding and jointing 22 ft. long approx. 250mm dia MS Pipe of proper thickness with bends, flanges etc., fitting already supplied SV and NRV with all required nuts, bolts, rubber insersion etc., anchoring each delivery pipe by constructing 2 nos. proper size of PCC thrust blocks and jointing it with 350 mm dia MS common delivery header pipe & applying suitable primer & paint all complete as per the direction of E/I for each newly installed pump sets.

Blaca Corporations

CHANDRA BROTHERS