Water proofing work at Terrace and arresting of leakage in toilets of Marketing office Aurobindo Market Hauz Khas New Delhi

Name Of The Work-Water proofing work at terrace and arresting of leakages in toilets of Marketing office Aurobindo Place Hauz khas New Delhi. CA No.HAL/LOD/SMW/01/25-26

PRE-QUALIFICATION DETAILS OF APPLICANTS [Section(1-4) Pages=06 Nos.]

Note:1. Vendors may use a separate sheet in prescribed format along with Annexures name and No., if space provided below is not sufficient.

2.Vendors are requested to write at the prescribed place only.

Section 1: Applicant’s Particulars

Name of the Individual / Firm / Company:

Constitutional or Legal Status of the firm(Prop./Pvt Ltd./partnership firm/Ltd.Co.)

Registration Number of the Firm from ROC (in case of Pvt.Ltd./Ltd.company) Registering Authority Date of Registration

Registered Address of the Firm:

Contact Person Name & Designation:

Address for correspondence(If different from Regd.Address):

Tel. No. Fax No.

Mobile No. Email Address:

PAN/GIR No. (Copy to be attached) GST No. (Copy to be attached)

(This declaration should be completed by a proprietor, partner, director or other authorized senior officer of the firm who has the authority to do so.)

‘I accept the HAL terms & conditions for this contract and declare that the particulars shown herein are true & correct in every detail.’

Details of persons holding the power of Attorney [If different from above]

(Upload, attested copy of Notarized Power of Attorney)

Name Tel No.: Mob:

Position Fax No.:

Section 2: Applicant’s Profile

2.1 Detail of registration of the firm if available with different following organizations(Attach necessary certificates from the registering authorities):

Company Registration Number Dated Validity Value of Contract for which Registered Class/Type of Registration Remarks (If any)

HAL or its other Division at Different Locations

Other clients(Govt./PSU/Autonomous body)(if any) (Specify).

2.2 Attach Company’s Memorandum of Association and Articles of Association/to be enclosed. Board resolution paper may be enclosed along with the memorandum of association( in case of Pvt.Ltd./Ltd.Co.)/Partnership Deed( in case of Partnership firm)/Registration no. in case of proprietory firm. (Write Enclosed/Not Enclosed) .

2.3(Write Yes/No in Col.5). Information on litigation history, in which the bidder is involved(if any).

Other party(ies) (Dispute involved with) Name of Employer Cause of dispute Amount involved. Remarks showing present status. (Write Yes/No )

Details Attached( if Yes)[Write attached/Not attached].

2.4 [ Write Yes/No ]- In the last 5 years, has your firm, or any firm with which any of your company’s owners, officers, partners were associated, been debarred, disqualified, removed, blacklisted or otherwise prevented from bidding or completing any contract?

If yes, state the project and the basis for the action.

Section 3 – Prequalification criteria

3.1 Solvency for a minimum value of Rs.8.67Lakh (Rs.Eight Lakh Sixty Seven Thousand only) issued within a period 12 months from the final date of submission of tender.i.e. issued after 21-05-2024.

Name of Bank & Branch Bank’s Reference and Date Value Rs. In Lakhs

3.2Annual turnover in the past 3 years ending 31- 03 -2025.

Note:- The annual turnover should be supported with audited financial statements of the concerned year. The average annual turnover for the last three years(starting from 2022-23 onwards) as above should not be less than 30 (Thirty) %(Rs.6.50 Lakh) of the estimated cost as indicated in the tender document. It is mandatory to furnish all the three year annual turnovers failing which tender are liable to be rejected.

Financial Year (Assessment year shall not be considered) Annual Turnover (Rs. In Lakh) Average Annual Turnover for last three Years ( Rs. In Lakh)

2024-25 [ If unaudited as on date of tender, then provisional certificate may be attached duly signed by CA].

3.3 Experience details

Experience of having successfully completed similar works during last seven (07) years starting ( From 01-05-2018 to 30-04-2025 ) should either of the following.(Work completed as a whole only shall be considered as experience;Ongoing work/partially Completed works/ Work-orders shall not be considered as experience certificate). Copy of experience certificate must be submitted. (a) ONE similar completed work costing not less than 80%(Rs. 17.34 Lakh) of the amount put to tender.

S. No. Name of the Work Date Of Completion Completed Cost Completion Certificate [Mandatory] Write Enclosed/Not Enclosed Name, address & Phone no. of the client

gh hj yu sd jk yu

Note: Completion certificate issued by the client should contain Completed value of the work, date of completion duly supported by agreement copy & work order copy .TDS certificate for full completion value is to be enclosed in case the client is a private firm. Tender offer shall be liable for REJECTION if the tenderer has not furnished the Completion certificate.

(b) TWO similar completed works costing not less than 50%(Rs.10.84 Lakh) of the amount put to tender.

S. No. Name of the Work Date Of Completion Completed Cost Completion Certificate [Mandatory] Write Enclosed/Not Enclosed Name, address & Phone no. of the client

Note: Completion certificate issued by the client should contain completed value of the work, date of completion duly supported by agreement copy & work order copy .TDS certificatefor full completion value is to be enclosed in case the client is a private firm. Tender offer shall be liable for REJECTION if the tenderer has not furnished the Completion certificate.

(c) THREE similar completed works costing not less than 40%(Rs. 8.67 Lakh) of the amount put to tender.

S. No. Name of the Work Date Of Completion Completed Cost Completion Certificate [Mandatory] Write Enclosed/Not Enclosed Name, address & Phone no. of the client

Note: Completion certificate issued by the client should contain Completed value of the work, date of completion, duly supported by Work-order copy & agreement copy. TDS certificate for full completion value is to be enclosed in case the client is a private firm. Tender offer shall be liable for REJECTION if the tenderer has not furnished the Completion certificate.

Similar Works- Experience in carrying out all types of civil worksshall be considered as similar works.Completion certificate indicating date of start,scheduled & actual date of completion, completed value should duly supported with work-order & BOQ, agreement copy etc.

Section 4 - Declaration

4.1 I/We declare and confirm that -

a. All information and attachments submitted in this application are true and correct.

b. I/We are aware that any false information provided herein will result in the rejection of my application and suspension of any registrations granted.

c. I/We shall not make refund claims of expenditure incurred in processing this application.

4.2 I/We enclose herewith a pay order / banker’s draft number: drawn on Bank:

Branch & address Name

Date: Designation:

HINDUSTAN AERONAUTICS LIMITED

Name Of The Vendor(M/s)

Bill of Quantities

Name of Work : Water-proofing on terrace . arresting of leakage in toilets and miscellaneous Civil Works at Marketing office Hauz Khas New Delhi

Note:- (i) All the sanitary items shall be approved brand such as Jaquar, Cera, Hindware, parryware etc. (ii) All the water Proofing materials shall be approved brand such as IWL,Dr. Fixit Torch shield,SIKA, RNG etc.

S.No. Description of Item Qty. Unit DSR 2023 Rate (In INR) including GST Escalation over DSR 2023 rate GST Factor DSR Estimated rate (INR) Estimated Amount (INR)

1 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area 3 sq. metres and below etc. directed and approved by EIC. 3.00 Each 367.20 1.00 1.00 367.20 1101.60

2 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 250 mm directed and approved by EIC. 2.00 Each 6945.60 1.00 1.00 6945.60 13891.20

3 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar etc. complete as directed and approved by EIC.( Brick tile shall be paid separately).(For the purpose of measurement the entire treated surface will be measured.) etc.directed and approved by EIC. 588.00 Sq.m 688.90 1.00 1.00 688.90 405073.20

4 Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water-proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat with common burnt clay F.P.S. (non modular) brick tiles of class designation 10 sqm brick tiles etc. complete as directed and approved by EIC. 588.00 Sq.m 607.40 1.00 1.00 607.40 357151.20

5 Taking down of glazed tiles, Mosaic, Skirting tiles,platform granite/ any other tiles/granite/Floor/wall tiles/ of any description etc. using chisels and hammer or with other dismantling tools in a proper manner and carefully etc. all complete as directed & approved by EIC. 75.00 Sq.m 73.40 1.00 1.00 73.40 5505.00

6 Taking down cement plaster on brick or concrete surfaces from walls etc, at any height or depth, raking out joints, hacking , scrubbing down with water etc. all complete as directed & approved by EIC. 75.00 Sq.m 54.65 1.00 1.00 54.65 4098.75

7 Forming & making good the jambs with required brick work in CM 1:6 proper bonding, jointing and plastering, in cement mortar 1:4 to match with the existing work to required line and plumb etc. complete all as directed & approved by EIC. 10.00 Sq.m 1264.35 1.00 1.00 1264.35 12643.50

8 Providing and laying glazed Vitrified tiles of matt finish anti-skid in floor of size 600mm *600mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily etc. as directed and approved by EIC. 30.00 Sq.m 1464.85 1.00 1.00 1464.85 43945.50

9 Providing and laying brick work in walls, pillars, fascia, drain etc. in cement mortar 1:6 (1 cement : 6 coarse sand) in well burnt clay bricks, First class bricks, straight or curved in plan of any radius at any level, up to any height or depth including cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds etc. complete in all respect as per specification and direction of EIC. 5.00 Cu.m 8971.10 1.00 1.00 8971.10 44855.50

10 Providing, rendering, screeding, dubbing out cement plaster in cement mortar 1:6 ( 1Cement : 6 Coarse sand) 15 mm average thickness, work upto at any height/depth on brick or concrete surfaces of any description fair / rough side, finishing fair trowelled to a smooth and even finish without using extra cement, including scaffolding, curing etc. complete as directed & approved by EIC. 50.00 Sq.m 383.00 1.00 1.00 383.00 19150.00

11 Providing and fixing white or any approved colour vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required etc. complete as directed and approved by EIC. 2.00 Each 8177.30 1.00 1.00 8177.30 16354.60

12 Providing and fixing white or any approved colour vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.directed and approved by EIC. 3.00 Each 15169.85 1.00 1.00 15169.85 45509.55

13 Providing & applying two coats of plastic emulsion paint of approved Brand and tint such as Asian/Burger/Nerolac paints conforming to IS 428-1969, to walls, ceiling or of any description to any depth and height including removal of existing treatment from wall, ceiling, surface etc. including providing and applying wall putty for making surface even and smooth all complete etc. as directed & approved by EIC. [Note- Wall Putty shall be separately]. 75.00 Sq.m 137.35 1.00 1.00 137.35 10301.25

14 Providing and laying cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 stone aggregate 20mm aggregate size) for hold fast, cill, lintel,plinth protection etc. or in any description of work including cost of all operations such as mechanical mixing, laying ,compacting, curing, side shuttering , scaffolding if any required finishing the surface even and smooth, etc. complete as directed & approved by EIC. 1.00 Cu.m 7878.50 1.00 1.00 7878.50 7878.50

15 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade etc.complete directed and approved by EIC. 75.00 Sq.m 1267.95 1.00 1.00 1267.95 95096.25

16 Providing and fixing CP brass health faucet with 1m long easy flex tube in chrome finish and wall hook with NRV(Back Flow preventer) etc. or any other equivalent make including jointing with water supply line and all complete operation for fixing including required accessories etc. all complete as directed and approved by EIC. 5.00 Each 1997.31 1.00 1.00 1997.31 9986.55

17 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. directed and approved by EIC. 5.00 Each 349.15 1.00 1.00 349.15 1745.75

18 Supplying & fixing in position C.P Bottle trap 32/40mm dia etc. complete as directed & approved by EIC. 10.00 Each 1034.80 1.00 1.00 1034.80 10348.00

19 Providing & Applying Birla white/Latafinish Myklaticate wall putty @ 0.40 Kg / Sqm for making surface even and smooth etc. all complete with labour, material ,required scaffolding, brushes and other tools & plants required for proper completion of work cleaning the splashes from door, windows and from other surfaces etc. complete as directed & approved by EIC. 75.00 Sq.m 156.05 1.00 1.00 156.05 11703.75

20 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.

21 Supplying & fixing in position concealed dual flush valve with divertor of approved make etc. all complete with internal fittings as directed and approved by EIC. 5.00 Each 5954.23 1.00 1.00 5954.23 29771.15

22 Supplying & fixing ultra thin head shower rose of 150mm dia. for 15mmor 20mm dia.inlet of approved make etc. all complete as directed and approved by EIC. 5.00 Each 222.35 1.00 1.00 222.35 1111.75

23 Supplying & fixing 4"PVC P-trap of approved make etc. all complete as directed and approved by EIC. 5.00 Each 286.41 1.00 1.00 286.41 1432.05

24 Supplying & fixing PVC nahny -trap (110mm * 75mm) of approved make etc. all complete as directed and approved by EIC. 5.00 Each 203.50 1.00 1.00 203.50 1017.50

25 Ssupplying & fixing 40mm (1.5") gate valve of approved make etc. all complete as directed and approved by EIC. 10.00 Each 826.10 1.00 1.00 826.10 8261.00

26 Supplying & fixing 20mm (0.75") gate valve of approved make etc. all complete as directed and approved by EIC. 10.00 Each 539.95 1.00 1.00 539.95 5399.50

27 Supplying & fixing (3") PVC pipe including bends,scokets,T-door and all internal fittings of approved make etc. all complete as directed and approved by EIC. 50.00 Rm 195.96 1.00 1.00 195.96 9798.00

28 Supplying & fixing (4") PVC pipe including bends, sockets,T-door etc. of approved make and all internal fittings etc.complete as directed and approved by EIC. 50.00 Rm 567.78 1.00 1.00 567.78 28389.00

29 Supplying and fixing in position set of white Glazed Vitreous China make wash basin including pedestals of approved make (design as approved by EIC) of size 650 x 400 mm approx. including cost of providing and fixing CI or rolled steel brackets including Providing and applying painting ( one coat red oxide primer and two coat of synthetic enamel paint), 32 mm dia waste coupling, 15/20 mm dia based pillar tap mixer , 32mm dia bottle trap ( minimum weight - 260gms) , 15mm size with nuts of 375mm long PVC connection, embedding the brackets in walls with Cement mortar 1:3 (1 cement: 3mortar), complete in all respect as directed & approved by EIC. [Note- The angle valve and bottle trap shall be paid separately under item no.30/ 33 and item no.18 respectively] etc. complete as directed and approved by EIC. 6.00 Each 3562.55 1.00 1.00 3562.55 21375.30

30 Supplying and fixing of CP brass Single angle cock / valves approved make for 15/20 mm dia pipe including jointing with water supply line and all complete operation for fixing including required accessories etc. all as directed and approved by EIC. 10.00 Each 574.30 1.00 1.00 574.30 5743.00

31 Providing and laying gang saw cut 30 mm thick, mirror polished pre-moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge with granite stone of colour black, cherry/ruby red of area less than 0.50 sqm.directed and approved by EIC. 10.00 Sq.m 4950.90 1.00 1.00 4950.90 49509.00

32 Providing and fixing factory made single extruded 25 mm thick WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge 10.00 Sq.m 3889.15 1.00 1.00 3889.15 38891.50

33 Supplying and fixing of CP brass Two way angle cock / valves of approved make for 15/20 mm dia pipe including jointing with water supply line and all complete operation for fixing including required accessories etc. all complete as directed and approved by EIC. 10.00 Each 2939.43 1.00 1.00 2939.43 29394.30

34 Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge. 20.00 Each 288.10 1.00 1.00 288.10 5762.00

35 Providing & fixing low level 10 litre capacity white/Coloured PVC flushing cistern of approved make etc. complete with all accessories such as inlet, ball valve, float, 15 mm dia PVC pipe connection,40 mm dia PVC flush pipe bent with necessary connections, fittings and clamps etc. complete as directed & approved by EIC. 5.00 Each 1190.65 1.00 1.00 1190.65 5953.25

36 Providing and applying water proofing chemical DAMPGUARD ( Dr. Fixit brand ) for dampproof coating for internal walls, floors and similar other description etc. complete in all respect as per manufacturer's specification and direction of EIC. 20.00 litre 216.06 1.00 1.00 216.06 4321.20

37 Supplying and fixing fancy type C.P. brass Toilet paper holder of approved quality / make such as etc. complete as directed & approved by EIC. 5.00 Each 803.70 1.00 1.00 803.70 4018.50

38 Providing and fixing CP brass towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms etc. complete as directed and approved by EIC. 5.00 Each 231.95 1.00 1.00 231.95 1159.75

39 Supplying and fixing fancy type C.P. Soap tray/dish fancy type of approved quality / make such etc. complete as directed & approved by EIC. 5.00 Each 111.45 1.00 1.00 111.45 557.25

40 Providing and fixing liquid soap container 109 mm wide, 125mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms directed and approved by EIC. 5.00 Each 168.35 1.00 1.00 168.35 841.75

41 Supplying & Fixing of gratings doom of 100mm dia.(Min. weight=25gm.) of approved make etc. all as directed and approved by EIC. 10.00 Each 53.25 1.00 1.00 53.25 532.50

42 Providing and fixing mirror of superior glass (of approved quality) and of Oval shaped 450x350 mm (outer dimensions) shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing etc. complete as directed and approved by EIC. 5.00 Each 1377.10 1.00 1.00 1377.10 6885.50

43 Supplying & Fixing of hydraulic door closer Aluminum body for each shutter of Everite or equivalent make (ISI mark) and as approved by EIC. 5.00 Each 983.15 1.00 1.00 983.15 4915.75

44 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.directed and approved by EIC. 25.00 Sq.m 617.05 1.00 1.00 617.05 15426.25

45 Providing, rendering, screeding, dubbing out cement plaster in cement mortar 1:4 ( 1Cement : 4 Coarse sand) 12 mm average thickness, work upto at any height/depth on brick or concrete surfaces within deep shafts or any other similar places of any description fair / rough side, finishing fair trowelled to a smooth and even finish without using extra cement, including scaffolding, curing etc. complete as directed & approved by EIC. 150.00 Sq.m 347.05 1.00 1.00 347.05 52057.50

46 Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws directed and approved by EIC. 10.00 Sq.m 3167.95 1.00 1.00 3167.95 31679.50

47 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm of approved make having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. 5.00 Each 7979.20 1.00 1.00 7979.20 39896.00

48 Supplying & fixing in position structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as directed and approved by EIC. 500.00 kg 133.70 1.00 1.00 133.70 66850.00

49 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified 2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified etc. complete as directed and approved by EIC. 20.00 Sq.m 1401.35 1.00 1.00 1401.35 28027.00

50 Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in-charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc including telescopic channel etc. as complete as directed and approved by EIC. 75.00 Kg 533.25 1.00 1.00 533.25 39993.75

51 Cutting hole in existing brick work cleaning out with steel wire brush, wetting, grouting with cement and sand slurry in CM 1:3 ( 1 Cement : 3 Coarse sand) work complete in all respect as directed & approved by EIC. 5.00 Each 288.10 1.00 1.00 288.10 1440.50

52 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of 65mm size of approved quality including necessary screws etc. complete as directed and approved by EIC. 50.00 Each 362.40 1.00 1.00 362.40 18120.00

53 Supplying and fixing in position magnetic catcher of approved brand etc. complete as directed and approved by EIC. 20.00 Each 31.00 1.00 1.00 31.00 620.00

54 Supplying and fixing for renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of nominal thickness 4 mm etc. complete as directed and approved by EIC.(weight not less than 10kg/sqm) 20.00 Sq.m 1090.65 1.00 1.00 1090.65 21813.00

55 Providing and fixing bright finished brass 100 mm long handles with screws of approved brand etc.complete as directed and approved by EIC. 52.00 Each 234.70 1.00 1.00 234.70 12204.40

56 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. 100.00 Sq.m 56.35 1.00 1.00 56.35 5635.00

57 Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7),humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/black),comprising of main-T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications and as per directions of the Engineer-in-Charge with 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles etc. complete as directed and approved by EIC. 100.00 Sq.m 2630.40 1.00 1.00 2630.40 263040.00

58 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprisingof uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile, appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sashshall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and ofapproved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes,wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. (i)Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and singleglazing bead of appropriate dimension (Area of window upto1.75 sqm) etc. complete as directed and approved by EIC. 5.00 Sq.m 12254.90 1.00 1.00 12254.90 61274.50

Total Estimated value -A 2166787.05

The vendors has to write in figures in either of the columns Below Above

Vendors are requested to quote in percentage(%age) [below or above] the estimated value(A) in either of the columns to be taken to decide as the lowest bidder.

HINDUSTAN AERONAUTICS LIMITED

Bill of Quantities

Name of Work : Water-proofing on terrace . arresting of leakage in toilets and miscellaneous Civil Works at Marketing office Hauz Khas New Delhi

Note:- (i) All the sanitary items shall be approved brand such as Jaquar, Cera, Hindware, parryware etc. (ii) All the water Proofing materials shall be approved brand such as IWL,Dr. Fixit Torch shield,SIKA, RNG etc.

S.No. DSR 2023 Ref. No. Description of Item Qty. Unit DSR 2023 Rate (In INR) including GST Escalation over DSR 2023 rate GST Factor Estimated rate (INR) Estimated Amount (INR)

1 15.12.1 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area 3 sq. metres and below. 3.00 Each 367.20 1.00 1.00 367.20 1101.60

2 17.10.1.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 250 mm 2.00 Each 6945.60 1.00 1.00 6945.60 13891.20

3 22.6 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar etc. complete as directed and approved by EIC.( Brick tile shall be paid separately).(For the purpose of measurement the entire treated surface will be measured.). 588.00 Sq.m 688.90 1.00 1.00 688.90 405073.20

4 12.19.1 Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water-proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat with common burnt clay F.P.S. (non modular) brick tiles of class designation 10 sqmBrick tiles etc. complete as directed and approved by EIC. 588.00 Sq.m 607.40 1.00 1.00 607.40 357151.20

5 15.23.1 Taking down of glazed tiles, Mosaic, Skirting tiles,platform granite/ any other tiles/granite/Floor/wall tiles/ of any description etc. using chisels and hammer or with other dismantling tools in a proper manner and carefully etc. all complete as directed & approved by EIC. 75.00 Sq.m 73.40 1.00 1.00 73.40 5505.00

6 15.56 Taking down cement plaster on brick or concrete surfaces from walls etc, at any height or depth, raking out joints, hacking , scrubbing down with water etc. all complete as directed & approved by EIC. 75.00 Sq.m 54.65 1.00 1.00 54.65 4098.75

7 14.4 Forming & making good the jambs with required brick work in CM 1:6 proper bonding, jointing and plastering, in cement mortar 1:4 to match with the existing work to required line and plumb etc. complete all as directed & approved by EIC. 10.00 Sq.m 1264.35 1.00 1.00 1264.35 12643.50

8 11.41A.3.1 Providing and laying glazed Vitrified tiles of matt finish anti-skid in floor of size 600mm *600mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 30.00 Sq.m 1464.85 1.00 1.00 1464.85 43945.50

9 6.28.2 Providing and laying brick work in walls, pillars, fascia, drain etc. in cement mortar 1:6 (1 cement : 6 coarse sand) in well burnt clay bricks, First class bricks, straight or curved in plan of any radius at any level, up to any height or depth including cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds etc. complete in all respect as per specification and direction of EIC. 5.00 Cu.m 8971.10 1.00 1.00 8971.10 44855.50

10 13.2.2 Providing, rendering, screeding, dubbing out cement plaster in cement mortar 1:6 ( 1Cement : 6 Coarse sand) 15 mm average thickness, work upto at any height/depth on brick or concrete surfaces of any description fair / rough side, finishing fair trowelled to a smooth and even finish without using extra cement, including scaffolding, curing etc. complete as directed & approved by EIC. 50.00 Sq.m 383.00 1.00 1.00 383.00 19150.00

11 17.3.1/ 17.16 Providing and fixing white or any approved colour vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required etc. complete as directed and approved by EIC. 2.00 Each 8177.30 1.00 1.00 8177.30 16354.60

12 17.78/ 17.16 Providing and fixing white or any approved colour vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. 3.00 Each 15169.85 1.00 1.00 15169.85 45509.55

13 13.82.2 Providing & applying two coats of plastic emulsion paint of approved Brand and tint such as Asian/Burger/Nerolac paints conforming to IS 428-1969, to walls, ceiling or of any description to any depth and height including removal of existing treatment from wall, ceiling, surface etc. including providing and applying wall putty for making surface even and smooth all complete etc. as directed & approved by EIC. [Note- Wall Putty shall be separately]. 75.00 Sq.m 137.35 1.00 1.00 137.35 10301.25

14 4.1.3 Providing and laying cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 stone aggregate 20mm aggregate size) for hold fast, cill, lintel,plinth protection etc. or in any description of work including cost of all operations such as mechanical mixing, laying ,compacting, curing, side shuttering , scaffolding if any required finishing the surface even and smooth, etc. complete as directed & approved by EIC. 1.00 Cu.m 7878.50 1.00 1.00 7878.50 7878.50

15 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 75.00 Sq.m 1267.95 1.00 1.00 1267.95 95096.25

16 MR Providing and fixing CP brass health faucet with 1m long easy flex tube in chrome finish and wall hook with NRV(Back Flow preventer) etc. or any other equivalent make including jointing with water supply line and all complete operation for fixing including required accessories etc. all complete as directed and approved by EIC. 5.00 Each 1997.31 1.00 1.00 1997.31 9986.55

17 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. 5.00 Each 349.15 1.00 1.00 349.15 1745.75

18 17.22A Supplying & fixing in position C.P Bottle trap 32/40mm dia etc. complete as directed & approved by EIC. 10.00 Each 1034.80 1.00 1.00 1034.80 10348.00

19 13.80 Providing & Applying Birla white/Latafinish Myklaticate wall putty @ 0.40 Kg / Sqm for making surface even and smooth etc. all complete with labour, material ,required scaffolding, brushes and other tools & plants required for proper completion of work cleaning the splashes from door, windows and from other surfaces etc. complete as directed & approved by EIC. 75.00 Sq.m 156.05 1.00 1.00 156.05 11703.75

20 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.

21 MR Supplying & fixing in position concealed dual flush valve with divertor of approved make etc. all complete with internal fittings as directed and approved by EIC. 5.00 Each 5954.23 1.00 1.00 5954.23 29771.15

22 18.22 Supplying & fixing ultra thin head shower rose of 150mm dia. for 15mmor 20mm dia.inlet of approved make etc. all complete as directed and approved by EIC. etc. 5.00 Each 222.35 1.00 1.00 222.35 1111.75

23 MR Supplying & fixing 4"PVC P-trap of approved make etc. all complete as directed and approved by EIC. 5.00 Each 286.41 1.00 1.00 286.41 1432.05

24 MR Supplying & fixing PVC nahny -trap (110mm * 75mm) of approved make etc. all complete as directed and approved by EIC. 5.00 Each 203.50 1.00 1.00 203.50 1017.50

25 18.17.3 Ssupplying & fixing 40mm (1.5") gate valve of approved make etc. all complete as directed and approved by EIC. 10.00 Each 826.10 1.00 1.00 826.10 8261.00

26 18.17.1A Supplying & fixing 20mm (0.75") gate valve of approved make etc. all complete as directed and approved by EIC. 10.00 Each 539.95 1.00 1.00 539.95 5399.50

27 MR Supplying & fixing (3") PVC pipe including bends,scokets,T-door and all internal fittings of approved make etc. all complete as directed and approved by EIC. 50.00 Rm 195.96 1.00 1.00 195.96 9798.00

28 MR Supplying & fixing (4") PVC pipe including bends, sockets,T-door etc. of approved make and all internal fittings etc.complete as directed and approved by EIC. 50.00 Rm 567.78 1.00 1.00 567.78 28389.00

29 17.7.4/ 17.80 Supplying and fixing in position set of white Glazed Vitreous China make wash basin including pedestals of approved make (design as approved by EIC) of size 650 x 400 mm approx. including cost of providing and fixing CI or rolled steel brackets including Providing and applying painting ( one coat red oxide primer and two coat of synthetic enamel paint), 32 mm dia waste coupling, 15/20 mm dia based pillar tap mixer , 32mm dia bottle trap ( minimum weight - 260gms) , 15mm size with nuts of 375mm long PVC connection, embedding the brackets in walls with Cement mortar 1:3 (1 cement: 3mortar), complete in all respect as directed & approved by EIC. [Note- The bottle trap & angle valve shall be paid separately under item no........ & .......... respectively. 6.00 Each 3562.55 1.00 1.00 3562.55 21375.30

30 18.53.1 Supplying and fixing of CP brass Single angle cock / valves approved make for 15/20 mm dia pipe including jointing with water supply line and all complete operation for fixing including required accessories etc. all as directed and approved by EIC. 10.00 Each 574.30 1.00 1.00 574.30 5743.00

31 16.87.1 Providing and laying gang saw cut 30 mm thick, mirror polished pre-moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge with granite stone of colour black, cherry/ruby red of area less than 0.50 sqm. 10.00 Sq.m 4950.90 1.00 1.00 4950.90 49509.00

32 26.89.2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately)using 25 mm thick 10.00 Sq.m 3889.15 1.00 1.00 3889.15 38891.50

33 MR Supplying and fixing of CP brass Two way angle cock / valves of approved make for 15/20 mm dia pipe including jointing with water supply line and all complete operation for fixing including required accessories etc. all complete as directed and approved by EIC. 10.00 Each 2939.43 1.00 1.00 2939.43 29394.30

34 14.81 Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge. 20.00 Each 288.10 1.00 1.00 288.10 5762.00

35 17.18.1 Providing & fixing low level 10 litre capacity white/Coloured PVC flushing cistern of approved make etc. complete with all accessories such as inlet, ball valve, float, 15 mm dia PVC pipe connection,40 mm dia PVC flush pipe bent with necessary connections, fittings and clamps etc. complete as directed & approved by EIC. 5.00 Each 1190.65 1.00 1.00 1190.65 5953.25

36 MR Providing and applying water proofing chemical DAMPGUARD ( Dr. Fixit brand ) for dampproof coating for internal walls, floors and similar other description etc. complete in all respect as per manufacturer's specification and direction of EIC. 20.00 litre 216.06 1.00 1.00 216.06 4321.20

37 17.34 Supplying and fixing fancy type C.P. brass Toilet paper holder of approved quality / make such as etc. complete as directed & approved by EIC. 5.00 Each 803.70 1.00 1.00 803.70 4018.50

38 17.72 Providing and fixing CP brass towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. each 5.00 Each 231.95 1.00 1.00 231.95 1159.75

39 18.65 Supplying and fixing fancy type C.P. Soap tray/dish fancy type of approved quality / make such etc. complete as directed & approved by EIC. 5.00 Each 111.45 1.00 1.00 111.45 557.25

40 17.71 Providing and fixing liquid soap container 109 mm wide, 125mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 5.00 Each 168.35 1.00 1.00 168.35 841.75

41 17.29 Supplying & Fixing of gratings doom of 100mm dia.(Min. weight=25gm.) of approved make etc. all as directed and approved by EIC. 12.00 Each 53.25 1.00 1.00 53.25 639.00

42 17.32.3 Providing and fixing mirror of superior glass (of approved quality) and of Oval shaped 450x350 mm (outer dimensions) shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing etc. complete as directed and approved by EIC. 5.00 Each 1377.10 1.00 1.00 1377.10 6885.50

43 9.84 Supplying & Fixing of hydraulic door closer Aluminum body for each shutter of Everite or equivalent make (ISI mark) and as approved by EIC. 5.00 Each 983.15 1.00 1.00 983.15 4915.75

44 22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 25.00 Sq.m 617.05 1.00 1.00 617.05 15426.25

45 13.1.1 Providing, rendering, screeding, dubbing out cement plaster in cement mortar 1:4 ( 1Cement : 4 Coarse sand) 12 mm average thickness, work upto at any height/depth on brick or concrete surfaces within deep shafts or any other similar places of any description fair / rough side, finishing fair trowelled to a smooth and even finish without using extra cement, including scaffolding, curing etc. complete as directed & approved by EIC. 150.00 Sq.m 347.05 1.00 1.00 347.05 52057.50

46 9.20.2 Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 10.00 Sq.m 3167.95 1.00 1.00 3167.95 31679.50

47 17.80 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm of approved make having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. 5.00 Each 7979.20 1.00 1.00 7979.20 39896.00

48 10.20 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 500.00 kg 133.70 1.00 1.00 133.70 66850.00

49 12.47.1 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified sqm 20.00 Sq.m 1401.35 1.00 1.00 1401.35 28027.00

50 9.173 Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in-charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately). 75.00 Kg 533.25 1.00 1.00 533.25 39993.75

51 14.81 Cutting hole in existing brick work cleaning out with steel wire brush, wetting, grouting with cement and sand slurry in CM 1:3 ( 1 Cement : 3 Coarse sand) work complete in all respect as directed & approved by EIC. 5.00 Each 288.10 1.00 1.00 288.10 1440.50

52 9.79.3 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of 65mm size of approved quality including necessary screws etc. complete as directed and approved by EIC. 50.00 Each 362.40 1.00 1.00 362.40 18120.00

53 9.114.1 Supplying and fixing in position magnetic catcher of approved brand etc. complete as directed and approved by EIC. 20.00 Each 31.00 1.00 1.00 31.00 620.00

54 14.5.1 Supplying and fixing for renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of nominal thickness 4 mm etc. complete as directed and approved by EIC.(weight not less than 10kg/sqm) 20.00 Sq.m 1090.65 1.00 1.00 1090.65 21813.00

55 9.81.2 Providing and fixing bright finished brass 100 mm long handles with screws of approved brand etc.complete as directed and approved by EIC. 52.00 Each 234.70 1.00 1.00 234.70 12204.40

56 15.57 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. 100.00 Sq.m 56.35 1.00 1.00 56.35 5635.00

57 26.23.1 Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7),humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/black),comprising of main-T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge with 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles. 100.00 Sq.m 2630.40 1.00 1.00 2630.40 263040.00

58 9.147D.2 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprisingof uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile, appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sashshall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and ofapproved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes,wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. (i)Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and singleglazing bead of appropriate dimension (Area of window upto1.75 sqm). 5.00 Sq.m 12254.90 1.00 1.00 12254.90 61274.50

Estimated value including GST 2166893.55