CONSTRUCTION OF 100000 Liters OHT 12M STAGE IN ELANGUDI HABITATION AT AMMAIYAPPAN PANCHAYAT

Amount

1.CONSTRUCTION OF 100000 Liters OHT 12M STAGE IN ELANGUDI HABITATION

Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.

First depth of 2m

2nd depth of 2m

Supplying and Filling foundation and basement with filling sand in layers not more than 15cm . Thick well ramed, watered and compacted Complete complying with stanard specification.

Cement concrete 1 : 4 : 8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed.

RCC M30 GRADE using graded aggregate of HBGs excluding cost reinforcement,centering , shuttering, but including cost of concrete,placing , vibrating etc complete.

Below 1.50m from GL

Upto GL

Above Gl and Upto 4.50m Height

Above 4.50m and upto 7.32m Ht from GL

Above 7.32m and upto 10.98m Ht from GL

From 10.98m upto 14.64m ht above GL

Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2 etc comple.

SQARE Surface

Columns above 3.30m upto 4.30m ht from GL

Columns above 4.30m upto 5.30m ht from GL

Columns above 5.30m upto 6.30m ht from GL

Columns above 6.30m upto 7.30m ht from GL

Columns above 7.30m upto 8.30m ht from GL

Columns above 8.30m upto 9.30m ht from GL

Columns above 9.30m upto 10.30m ht from GL

Columns above 10.30m upto 10.90m ht from GL

Below G.L and upto 3.30m ht above GL

From 3.30m to 4.30m ht above GL

From 3.30m to 4.30m ht above GL

From 6.30m to 7.30m ht above GL

From 7.30m to 8.30m ht above GL

From 10.30m to 11.30m ht above GL

From 11.30m to 12.30m ht above GL

Circular Surface

Centre Column From 3.30m to 4.30m Height

Centre Column From 4.30m to 5.30m Height

Centre Column From 5.30m to 6.30m Height

Centre Column From 6.30m to 7.30m Height

Centre Column From 7.30m to 8.30m Height

Centre Column From 8.30m to 9.30m Height

Centre Column From 9.30m to 10.30m Height

Curved Surface

Centre Column From 10.30m to 10.90m Height

From 10.30m to 11.30m Height

10.30m to 12.30m Height

Supplying, fabricating and placing in position of HSD steel rods for reinforcement including the cost of steel and binding wire etc., complete and as directed by Board officers.

Exterior Emulsion two coats of approved colour including cost and conveyance and all labour charges etc complete .

Supplying and Fixing in Position of Cut Stone set in Cm 1:3 using well dressed cut stone supporting inlet pipe inside the tank and as directed by the officers

Provision for pipe connection arrangements for inlet outlet, scour and overflow etc., includeing cost of pipes, specials, valve, labour charge for lifting, aligning, cutting, threading, fixing and painting of GI pipes with two coats of approved quality enamel paint etc., complete as detailed below.

For Inlet Arrangements

80mm GI Pipes

80mm GI Coupling

80mm GI Bend

80mm GI Flange Set

90mmx80mm PVC Threaded Coupler

For Outlet Arrangements

80mm GI Pipes

80mm GI Coupling

80mm GI Bend

80mm GI Flange Set

80mm GM Gate Valve

65mm GM Gate Valve

90mmx80mm PVC Threaded Coupler

90mm x 63mm PVC Reducer

For Source Arrangemets

80mm GI Pipes

80mm GI Coupling

80mm GI Bend

80mm GI Flange Set

80mm GM Gate Valve

90mmx80mm PVC Threaded Coupler

For Overflow Arrangements

80mm GI Pipes

80mm GI Coupling

80mm GI Bend

80mm GI Flange Set

90mmx80mm PVC Threaded Coupler

Rubber Sheet

Bolt and Nuts

Labour Charges

80mm GI Pipe - Cutting

80mm GI Pipe - Threading

Supply delivery and fixing of staircase with M30 grade concrete for landings, MS ladder of 0.45m wide using 50x50x5mm MS angles for sides and steps at 0.30m c/c, with GI pipe handrails using 32mm GI pipes for railings and verical support at 0.45m C/c, MS flats (Size 40mm x 5mm ) for horizontal ties at 0.3m c/c and at bottom with Anchor fastener bolts of size 12mm x 75mm including cost of materials labour for fabrication of handrails fixing, painting etc., complete. Board officers.

Supply and delivery and fixing position of CI man hole cover and frame of Size 60x60cm on roof slab and as directed by the officers The manhole frame and cover should be of light duty and conforming to ISI 1726/1974

Supply and Delivery and Fixing in Position of 150mm dia AC Ventilators on the roof Slab and as directed by the officers

Refilling the Foundation for Service reservoir with excavated earth (other than sand) in layers of 15cm thick well rammed,watering and consoildating etc Complete complying with standard Specification as directed by the officers

Providing and fixing of RCC inner access ladder in RCC 1:1:5:3 (one cement, one and half sand and three aggregates) using 20mm HBG stone for OHT including cost of reinforcement, placing grill in position, centering shuttering charges, mixing concrete curing etc., to required height and clear width of 45cm consisting of two Nos. of vertical post of 10cm x 15cm and step slab of 25mm x25mm etc., complete and as directed by Board officers.

Reinforced Cement Concrete with M30 Design Mix for the following members excluding the cost of reinforcement and fabricating, centering, shuttering and strutting charges but including the cost of all materials, mixing, placing in position, lifting, vibrating, finishing & curing, etc. complete.and as directed by TWAD Board Officers.

Supply and erection of steel centering, shuttering for soffits and sides including necessary supports and strutting for all RCC works using MS sheets of suitable size of BG 10 stiffened with MS angle of size 25 X 25 X 3mm for boarding laid over Silver Oak joists of size 10cm X 6.5cm space at 10cm c/c and supported by Casurino Props 10cm - 13cm spaced at 75cm c/c etc., complete and as directed by TWAD Board Officers.

Supplying, fabricating and placing in position of RTS / MS rods for reinforcement including cost of steel and binding wire, labour charges etc., complete for RCC works and as directed by TWAD BoardRCC works and as directed by TWAD Board Officers.Officers.

Fixing the precast RCC ladder in position

Providing Lettering Nameboard Charges

Labour charge for SR Tank connection work

90mm PVC Pipe 6ksc

Earth Work excvation and depositing on bank with intial lead and lift including all charges )

Laying and Jointing of PVC Pipe into Trench

Refilling the earth work after into trench

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Elamvazhuthi Rengarajan