Construction of 05 roomed building at katwara ,Block Machil

Amount

Earth work in excavation in foundation trenches drains (not exceeding 1.5 m in width as well as 10 Sqm in plan ) including dressing of slides and ramming of bottoms, lift up to 1.50 m including getting out the excavated soil and disposal of surplus excavated soil as directed.

Providing and laying of nallah stone solling tightly hand packed in foundation and plinth including all types of carriages

P/L in position specified grade e including curing but excluding the cost of centering and shuttering, finishig and reinforcement All work upto plinth level with 1:4:8(1cement:4coarse sand : 8graded stone agg. 40 mm size ) including all carriages by MT as well as HL of material up to site of Work Complete job.

P/L in position cement concrete. of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with 1:3:6(1cement:3 coarse sand : 6 graded stone agg 20 mm size (crushed aggreagtes) including all carriages by MT as well as HL 300 mtr of material up to site of work complete job.

Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.

Centering and shuttering including strutting, propping etc. and removal of form work for: Columns, piers, abutments, pillars, posts and struts

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) including Extra for brick work with common burnt clay bricks in superstructure above plinth level upto floor five level incl all carriages (MT s well as HL)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcement for RCC works including straightening cutting bending placing in position complete

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length(2nd class kail wood)

Providing and fixing glazed shutters for doors, windows and clerestory windowsusing 4mm thick float glass panes including ISI marked M.S. pressed butthinges bright finished of required size with necessary screws. Second class Kail wood

12 mm thick plaster on rough side of brick wall in 1:4 mix

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Cement concrete flooring 1:2:4 50 mm thick (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. including all carriages

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Construction of black boards of sixe (8x4) feet on brick wall

Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete (KD wood or Budloo wood )

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2

P/F of 12mm thick plywood of approved quality and make for ceiling i/c necessary frame work of KD wood,and painting complete job

Providing and fixing of Community Inforamtion board (CIB)

M/S GANAIE CONSTRUCTION

ABDUL LATEEF TEEDWA

MS J K CONSTRUCTIONS