Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.6 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹42.9 L+₹96,421 (2.30%)Rejected-Finance | L2 | Rejected-Finance Due to not lowest | |
| 3 | L3₹43.0 L+₹1.0 L (2.50%)Rejected-Finance PEMASAR ROAD WARD NO 04 UDASAR BIKANER RAJ 334001 | BIKANER | BIKANER | RAJASTHAN | 334001 | L3 | Rejected-Finance Due to not lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
26 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE North Bikaner
GE North Bikaner Rajasthan 334001
WELCOME MAINTENANCE AND PETTY REPAIR FOR OFFRS QTRS ZONE C AND ZONE D UNDER GE NORTH AT MIL STN BIKANER
2022_MES_522687_1
GE (N) BKN TOKEN NO 18 /2022-2023
Open Tender
Miscellaneous Works
Item Rate
335 days
GE (N) BIKANER
Class D category a i
7 documents required · 7 mandatory
₹500
GE North Bikaner
₹90,000
Yes
9 Jun 2022
7 May 2022
28 May 2022
7 May 2022
26 May 2022
14 May 2022
Amount
Taking up or down steel tubing 15 mm dia and connections and stacking neatly for offering credit complete all as specified and directed by engr-in - charge.
All as per item N 1 but 20 mm dia complete all as specified and directed by engr-in - charge.
M & L for Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed by engr-in - charge.
M&L Figured glass, pin head type, 4mm thick and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed by engr-in - charge.
M&L 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not execeeding 0.5 sqm in each pane for metal frames complete all as specified and directed by engr-in - charge.
S&F 1.25 mm thick Pressed steel frames of size 125mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns complete all as specified and directed by engr-in - charge.
S&F 1.25 mm thick Pressed steel frames of size 105mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, complete all as specified and directed by engr-in - charge.
S&F Second class hard wood plain, framed, panelled shutters 35mm thick, (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered partcile board medium density wood particle board with commercial faces venners supplied and fixed to chowkats complete all as specified and directed by engr-in - charge.
S& F in repair 30 mm thick Flush shutters for door solid core construction, with block board core, and ply wood face panels with lipping to match complete all as specified and as directed by Engineer-in-Charge.
S&F Second class hard wood, glazed and skelleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc without sash bar, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauze etc, size of members as directed supplied and fitted to chowkats complete all as specified and directed by engr-in - charge.
S&F Stainless steel wire cloth o.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by engr-in - charge.
S&F in repair Stainless steel wire cloth o.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by engr-in - charge.
S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube suppling & fixing in opening complete all as specified and directed by engr-in - charge.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bttom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail, Panneling of plain color PVC sheet to be fitted in the MS frame welded /sealed to the stiles &rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed by engr-in - charge.
S&F Second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by engr-in - charge.
S&F Steel window with side hung shutter incl.box type hinges with steel handle of MS flat 25x5mm and 2nos tower bolt of 100mm long fixed to shutter comp. With glazing bar dovtailed or welded including one shop coat of primer complete all as specified and directed by engr-in - charge.
S&F Steel window with side hung shutter incl.box type hinges with steel handle of MS flat 25x5mm and 2nos tower bolt of 100mm long fixed to shutter comp. Without glazing bar dovtailed or welded including one shop coat of primer complete all as specified and directed by engr-in - charge.
S&F Steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified and directed by engr-in - charge.
S&F framed work such as grills ,framed guard bars barred iron doors ;ladders framed balusters railings and similar work conforming to Fe 410-0or Fe 310-0 complete all as specified and directed by engr-in - charge.
S&F Butt hings, 100 mm long, extructed aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed by engr-in - charge.
S&F Extruded aluminium alloy handles, 100 mm long, fabricated type anodised complete all as specified and directed by engr-in - charge.
S&F Aluminium, anodised , 100 mm long, barrel tower bolts of extruded section complete all as specified and directed by engr-in - charge.
S&F Extruded aluminium alloy handles, 150 mm long, fabricated type anodised complete all as specified and directed by engr-in - charge.
S&F Aluminium, anodised , 150 mm long, barrel tower bolts of extruded section complete all as specified and directed by engr-in - charge.
S&F Aluminium alloy, anodised, slidding door bolt 300mm long, with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed by engr-in - charge.
S&F Teak wood beading 20x60mm half round complete all as specified and directed by engr-in - charge.
S&F Prelaminated partical board 18/19mm medium density ,prelaminated with one side with decorative choice laqmination and other side balancing with white lamination fixed with screws as in shelves to kitchen almirah and cub board fixed in repair complete all as specified and directed by engr-in - charge.
S&F Hasp and staple 100mm aluminium anodised, safety type, with mild steel hinges pin including bolt to hinge plate and fixed with screws complete all as specified and directed by engr-in - charge.
S&F Aluminium plate type II gate and shutter, hooks and eyes, 150mm size complete all as specified and directed by engr-in - charge.
S&F Mild steel, 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete fixed in repair complete all as specified and directed by engr-in - charge.
S&F Mild steel work as in hold fasts, clamps, bands, straps etc conforming to Fe 410-0 complete all as specified and directed by engr-in - charge.
S&F Sinks with drainage board made of stainless steel 1mm thick kitchen or laboutery with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm 330 mm x 160mm complete all as specified and directed by engr-in - charge.
s&f in repair Stainless steel plate rack, tubular type, with fixing arrangement 900mm x 900 mm size complete all as specified and directed by engr-in - charge.
S&F curtain rods, 20mm dia mild steel, chromium plated including brackets, stops etc and fixed in repairs complete all as specified and directed by engr-in - charge.
S & F in repair glass corner of size 300mmx300mm with 5.5 mm thick glass and steelness steel clip and steelness steel railing allround the shelf complete all as specified and directed by engineer in charge .
M&L Non skid coloured Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors on 15mm thick screeding in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by engr-in - charge.
M&l Glazed ceremic tiles coloured 450X300mmX7mm/350x250x7 mm thick coloured,set and jointed in neat cement slurry and pointed in white cement or coloured to match colour matching with floor tiles as on vertical surfaces laid over 10mm thick cement screed in 1:4 complete all as specified and directed by engr-in - charge.
M and L for coloured Non skid ceramic tiles exceeding 0.11 sqm but not exceeding 0.18 sqm 7 to 8mm thick in floors set and jointed in neat cement slurry and pointed in coloured cement to match the floor laid over 15mm thick screed in cement mortar 1:6 complete all as specified and directed by engr-in - charge.
All as per item No 39 above but on vertical surface over 10 mm thick rendering in CM (1:4) complete all as specified and directed by engr-in - charge.
M&L Vitrified Ceramic tiles 10 mm thick (square /rectangular) area of each tile not exceeding 0.36 sqm, in floors on 15mm thick screeding in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by engr-in - charge.
M&L Vitrified Ceramic tiles 10 mm thick (square /rectangular) area of each tile not exceeding 0.36 sqm, in verticle on 15mm thick screeding in CM 1:4. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by engr-in - charge.
M and L for 20mm thick granite (of any type) work in steps, jambs,pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by engr-in - charge.
M & L PCC 25 mm thick 1:2:4 type B0 (12.50 mm graded aggregate) in any position in ground floor/roof complete all as specified and as directed by engr-in-charge.
S&F PVC (SWR) pipes 75 mm bore, single socketed, in any length with rubber ring jointed fixed to walls complete all as specified and directed by engr-in - charge.
S&F PVC (SWR) pipes 110mm bore, single socketed, in any length with rubber ring jointed fixed to walls complete all as specified and directed by engr-in - charge.
S&F PVC (SWR) branch piece, single (single Y) equal or unequal, 75mm bore complete all as specified and directed by engr-in - charge.
S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110mm bore complete all as specified and directed by engr-in - charge.
S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed by engr-in - charge.
S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed by engr-in - charge.
S&F PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and directed by engr-in - charge.
S&F 75mm Aluminium mortice lock vertical type 4 lever complete all as specified and as directed by Engr-in-charge.
S&F in repair door closer of cast iron body, hydraulically regulated, designation No 2, universal type, suitable for door shutters of 701mm to 850mm wide and of weight between 36 to 60 kg, ISI marked complete all as specified and as directed by Engr-in-charge.
S&F in repair 150 mm Floor door stoper of aluminium alloy and insulation and tounge, anodised with`hard steel spring in floor complete all as specified and as directed by Engineer-in-Charge.
S&F in repair 15mm bore brass spindle of best quality suitable for bib tap and stop cock to make the bib tap and stop cock fully functional complete all as specified and as directed by Engineer- in - Charge.
Attending the complaints of AGE B/R like fixing screws to tower bolt/Aldrop bolt/ stoppers,Handle/ Hings in respect of Easening of ( Steel/wooden/Aluminum) door/Windows of any description and size , by cleaning ,adjusting in position and making the same functional incl small repairs if reqd. with and incl greasing , oiling. (Note : The complaint received from complaint cell shall have to be attended on same day) complete all as specified and directed by engr-in - charge.
S&F in repair Spray jet, brass chromium plated, with and including 1.5 metre long PVC flexible reinforced pipe for EWC, for bore dia of pipe 15mm,complete all as specified and as directed by Engineer-in-Charge.( Prayag/ Parryware/Cera)
M& L GI Tubing, medium grade galvanised, 15 mm bore with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed by engr-in - charge.
M& L GI Tubing , medium grade galvanised, 20 mm bore with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed by engr-in - charge.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete all as specified and directed by engr-in - charge. (capacity of tanks exc 250 ltr and n exc 500 ltrs)
Dismantling Rotational Moulded plyethyelene water strogr tank of capacity exc 250 lit but not exc 500 lit complete all as specified and as directed by Engineer-in-Charge.
M&L Rotational moulded polyethylene water storage tanks of capacity 500 litres, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and as directed by Engineer-in-Charge. (Notes : (i) The water storage tanks shall be 2 layers, HDPE tanks moulded to seem-less perfection of rotational moulding process. The tanks shall be manufactured only from FDA approved special grade of polyethylene and shall be certified fit for potable water. (ii) The tanks shall be ISI marked. Also refer paras 18.60 and 18.60 A of MES Schedule Part-I. (iii) Payment for inlet, outlet and over flow pipes and ball valve shall be made separately. However cost of providing necessary GI fittings such as nipples with check nuts for inlet and outlet pipes, GI plug with check nut for over flow pipe and 30 cm long wash out pipe, GI 20mm nominal bore, medium grade and check nut for wash out pipes of size as per actual requirements and as directed by the Engineer-in-Charge shall be deemed to be included in the unit rate of this item.)
Dismantling Rotational moulded polyethylene water storage tanks of exc 500 nexc 1000 litres capacity complete all as specified and directed by engr-in - charge.
Ditto all as per Srl item No 62 here in before but capacity of tank 1000 Litres complete all as specified and directed by engr-in - charge.
S&F in repair (Syphon internal fitting ) of PVC low level cistern as per existing pattern to make the PVC low level cistern fully functional complete all as specified and as directed by Engineer- in - Charge.
S&F Ball valve high pressure of PTMT with epoxy coated almn rod and high density plastic ball screwed for iron pipe and fixed fixed in repair.of 20mm complete all as specified and directed by engr-in - charge. Make : Prayag or equivalent.
S&F in repair Brass chromium plated WHB mixer non telephonic for mixing hot and cold water screwed down for iron pipe 15 mm bore complete all as specified and as directed by Engineer-in-Charge.( Prayag/ Parryware/Cera)
S&F in repair brass CP wall mixer non telephonic for mixing hot and cold water screwed down for iron pipe 15mm bore complete all as specified and directed by engr-in - charge. (Make : PRAYAG or equivalent).
S&F in repair vitreous china wash down water closet pan with fixing bolts, trap (pedestal pattern), white, (excluding flushing cistern and flush pipe) complete fixed in repairs complete all as specified and directed by engr-in - charge.
Supply and fix in repair vitreous china wash hand basin flat back size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand etc complete fixed in repairs complete all as specified and directed by engr-in - charge.
S & F in repair PVC valveless syphonic action type flushing cistern, 10 ltr capacity low level , white with inlet, ball valve, float and handle including brackets fixed in repairs complete all as specified and directed by engr-in - charge.
S&F in repairPVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed by engr-in - charge.
S&F in repair Stainless steel tubular towel rail, 20 mm dia D type 60cm long between flanges complete all as specified and directed by engr-in - charge.
M&L in repair Bib tap 15 mm dia, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe and fixed in repairs complete all as specified and directed by engr-in - charge.
M&L in repair Stop valve, 15 mm dia, fancy type, Chromium plated, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and directed by engr-in - charge.
M&L in repairPillar taps, 15mm dia, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, long screwed shanks and fly nuts, screwed for iron pipe and fixed in repairs complete all as specified and directed by engr-in - charge.
M&L in repair Brass chromium plated shower rose 125 mm size including fixing to steel pipe or union fixed as directed by Engineer in charge .
S&F in repair PVC Toilet cabinet with shelves and shutters fixed with looking mirror of size 600 x 450 mm as directed by Engineer in charge .
S& F in repair Plastic water closet seat, any colour, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device as directed by Engineer in charge.
S&F in repair CP Health Faucet fixed type suitable for EWCs with 1,5 mtr stainless steel tube complete all as specified and directed by Engineer-in-charge.
S&F in repair CP toilet paper holder fancy type complete all as specified and directed by Engineer-in-charge.
S&F in repair angle valve cast copper alloy fancy type CP with long shank and cup and screwed for 15 mm iron pipe fixed complete all as specified and directed by engr-in - charge.
S&F Waste pipe 32mm for WHB with coupling fixed in repairs complete all as specified and directed by engr-in - charge.
S&F grating doom 125 mm dia with waste hole of PTMT complete all as specified and directed by engr-in - charge. (minimum weight 40 gms)
M&L in repair Chromium plated soap dish complete all as specified and directed by Engineer-in-charge.
M&l Rendering 15 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces finished fair and even complete all as specified and directed by engr-in - charge.
M&L Rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and directed by engr-in - charge.
M&L Rendering 5mm thick on fair faces of conc. Surfaces in cement mortar 1:3,even and smooth w/o using extra cement as on ceiling complete all as specified and directed by engr-in - charge.
M&L for preparing new surface of wood of any desc over 10cm width or girth and applying two coats of synthetic enamel paint .over pink primer complete all as specified and directed by engr-in - charge.
M&L preparing new surface of steel of any desc over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide complete all as specified and directed by engr-in - charge.
M&L Preparing old decorated surfaces of wall and applying two coat of white wash complete all as specified and directed by engr-in - charge.
All as per item No 91 above but on ceiling complete all as specified and directed by engr-in - charge.
M&L Preparing the old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by engr-in - charge.
All as per item No 93 above but on steel surfaces complete all as specified and directed by engr-in - charge.
M&L Preparing of old decorated surfaces of wall and applying two coat of distemper oil emuision complete all as specified and directed by engr-in - charge.
M&L Preparing of old decorated surfaces of wall and applying one coat of distemper oil emuision complete all as specified and directed by engr-in - charge.
Complete removal of existing treatment and Applying 3 mm thick layer of putty on wall surfaces complete all as specified and directed by engr-in - charge.
M&L Preparing old surfaces of wall and applying one coats of plastic emulsion paint complete all as specified and directed by engr-in - charge.
M&L Preparing old surfaces of ceiing and applying one coats of plastic emulsion paint complete all as specified and directed by engr-in - charge.
M&L Preparing surfaces of plaster or unplaster new and applying three coat of white wash on ceiling complete all as specified and directed by engr-in - charge.
M&L Preparing newly plastered surfaces of wall and applying two coats of colour wash complete all as specified and directed by engr-in - charge.
M&L Preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted complete all as specified and as directed by Engineer-in-Charge.
M&L preperation of old decorative concrete, plastered/ un-plastered surface by brooming down, steel wire brushing, scaping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of weather proof exterior emulsion paint of any tint complete all as specified and directed by engr-in - charge.
M&L preperation of new decorative concrete, plastered/ un-plastered surface by brooming down, steel wire brushing, scaping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying two coat of weather proof exterior emulsion paint of any tint complete all as specified and directed by engr-in - charge.
Dismantling strucural steel work including door gates but excluding framed truss complete all as specified and directed by engr-in - charge.
M&L for MS framed work as steel gates, chowkhats and other similar work of angle or other section with gusset plates rails, braces etc complete driling for fixing of steel sheeting or other covering etc, confirming to Fe 290 Gde E-165 complete all as specified and as directed by Engineer-in-Charge.
M&L for Preparing of old decorated surfaces of ceiling and applying one coat of distemper oil emuision complete all as specified and directed by engr-in - charge.
M&L Bee wax polishing on previously polished surfaces of any description width or girth including cleaning and preparing the floor surfaces complete all as specified and directed by engr-in - charge.
M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed by engr-in - charge.
M&L for ATT Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed by engr-in - charge.
M&L in repair 1.25 mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of prime erected in position as indicated,complete: push pull or manual type complete all as specified and directed by engr-in - charge.
S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed by engr-in - charge.
S&F Ball bearing for rolling shutters complete all as specified and directed by engr-in - charge.
Providing and fixing in repair Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
M&L 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square of any thickness in each pane for metal frames complete all as specified and directed by engr-in - charge.
Dismantling of Roof tiles of any description or thickness in floor, apron etc laid, bedded and pointed in cement mortar complete all as specified and as directed by Engineer-in-Charge.
Demolition of lime concrete of any description over roof slab complete all as specified and as directed by Engineer-in-Charge.
M&L for 10 mm thick Rendering in cement mortar 1: 4 on concrete surfaces, finished Fair & even including mixing water proofing compound as per manufacturer's instns complete all as specified and as directed by Engineer-in-Charge. ( WPC to be measured separately as supply only)
M&L Preparing surface and cleaning of concrete slab by wire brushing and applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20 Kg per sq m including cleaning surfaces complete all as specified and as directed by Engineer-in-Charge
M&L 150 micron polyethylene sheet supplied and fixed complete all as specified and as directed by Engineer-in-Charge
M&L Lime concrete terracing as in roof complete all as specified and as directed by Engineer-in-Charge.NOTE:- For lime concrete, mudia kankar (source : NAL) and Kolayat coarse sand in lieu of brick aggregates and Surkhi respectively as specified in MES schedule Part-I shall be used complete all as specified and as directed by Engineer-in-Charge.
M&L 40 mm thick brick tiles bedded on 10mm thick CM 1:6 and joints grouted flush in cement and sand mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and as directed by Engineer-in-Charge.
Ditto all as per Srl item No 122 but except tiles complete all as specified and as directed by Engineer-in-Charge.
M& L for cement mortar for raking out joints/ pointing to brick tiles laid flat in roofs and flush pointing tiles 30 cm by 15 cm tiles laid flat in 1:3 cement mortar complete all as specified and as directed by Engineer-in-Charge.
S&F in repair towel ring with material brass with glossy finish with fitting complete all as specified and as directed by Engineer-in-Charge.
S&F in repair glass shelf 500 mmx60 mm with ABC brackets (450x125x6 mm) complete all as specified and as directed by Engineer-in-Charge.
S&F in repair 15 mm bore wall mixer with telephone shower arrangement complete all as specified and as directed by Engineer-in-Charge.
Dismantling of stone slab and tiles of any description or thickness in floor, apron etc laid bedded and pointed in any mortar complete all as specified and as directed by Engineer-in-Charge.
Taking down carefully (aluminium) point wiring complete of any type (batten/ surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and as directed by Engineer-in-Charge.
M & L for point wiring with and including single core FRLSH PVC insulated and unsheathed stranded copper conductor cable of size 1.5 sqmm 1100 volts grade drawn through and including suitable size of PVC concealed conduit with accessories with laminated top cover fixed on MS sunken box for housing of switch, socket, regulator etc complete with and including 1.5 sqmm FRLSH PVC insulated and unsheathed stranded copper conductor cable as earth wire and connected to common earth dolly and making good to the disturbed surfaces of wall, floor, ceiling etc to match with exisiting surface complete all as specified and as directed by Engr-in-Charge for the following :- (a) One Light/fan/ex-fan/Bell/point controlled by one switch.
(b)One pin 5 amps socket point on the same board with other switches complete
(c) One 3 pin 5 amps socket on independent board.
(d) One light point controlled by two 2-way switches, with cables 1.5 sq. mm size
all as per item No 131 above but with 2.5 sqmm copper wire for 3 pin socket outlet 15 Amp on independent board complete and all as directed by Engr-in-charge.
all as per item No 131 above but with 4.0 sqmm copper wire for 3 pin socket outlet 15 Amp on independent board complete and all as directed by Engr-in-charge.
S&F switch piano type, 5 Amp, single pole one way, 230 Volts, flush type complete all as specified and as directed by Engr- in -charge.
M&L Switch piano flush type single pole, one way 15 Amps 230 Volts complete all as specified & directed by Engr-in-Charge.
M&L socket outlet 3Pin, 5 Amps flush type 230 Volts complete all as specified and directed by Engr-in-Charge.
M&L for socket outlet 2 in 1, 3 Pin, 5 & 15 Amps, 230 Volts t complete all as specified & directed by Engr-in-Charge.
S&F ceiling rose, surface backelite , three terminal AC, 230 volt complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 5watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge.
S&F LED tube light fitting, 1x 20-22 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre-wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. Make : Philips-BN021 LED 20S PSU CW GR S2/ Crompton Greaves LDDR20-CDL Dazzle Ray / bajaj-BCLAB 20W
S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed by engineer-in-charge.
supply and fixing fan regulator electronic socket type five step controlled 230V AC 50 Hz for complete all as specified and directed by Engr-In-Charge.
S&F sheet metal enclosure MCB DB, double door, TPN 4 way with 200 Amps rated busbar complete all as specified and as directed by Engineer-in-Charge. Make:- Hegar/Legrand/Seimens
S & F double door, sheet metal enclosure, powder coated for MCB DB SPN 8 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified and as directed by Engr-in-charge.
S & F MCB SP, 5-32 Amps , 240 volts, breaking capacity 10KA complete all as specified and as dircted by Engr-in-charge.
S&F MCB 63amps, C curve TPN, 415 volts, complete all as specified and as directed by Engr-in-charge.
supply and fixing Bell push, flush type, 5 amp 230V AC 50 Hz for complete all as specified and directed by Engr-In-Charge.
supply and fixing Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and directed by Engr-In-Charge.
M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed by Engineer-in-Charge.
Taking dowen and refixing LED light fitting mirror type with high out put diffuser 2 feet, 10/5 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge.
Taking dowen and refixing LED tube light fitting, 1x 20-22 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre-wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge.
S&F MCCB 100 amps, 4 pole, 415 volts, fixed type breaking capacity 16KA complete all as specified and as directed by Engr-in-charge.
S&F MCCB 40 amps, 4 pole, 415 volts, fixed type breaking capacity 16KA complete all as specified and as directed by Engr-in-charge.
S&F in replacement Decorative wall light fittings complete made up of Polycarbonate, including with for 9 W LED lamp Complete all as specified and directed by Engr-in-charge. Make/ sample approved by Engr-in-charge : Surya / Havell's/ Phillips
S&F in replacement bad side light fitting with suitable LED bulb complete all as specified and directed by Engr-in-charge. Sample approved by Engr-in-charge and GE .
S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge.
S&F Switch piano Single pole 5 Amps, two way, complete all as specified and as directed by Engineer-in-Charge
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and as directed by Engineer-in-Charge.
M & L for submain (single phase) wiring complete with and including 10 sqmm two single core,(FRLSH) fire retardant, PVC insulated and unsheathed multistranded copper conductor cable, 1100 Volts grade, drawn through Existing PVC conduit including accessories and fixed on walls and10sqmm, fire retardant, PVC insulated, multistranded copper conductor cable for earthing and connected to common earth dolly complete all as specified and as directed by Engr-in-Charge. Note :- (i) Two runs of10.0 sqmm PVC insulated wire and one run of 10sqmm wire and one run of PVC conduit shall be measured as one unit length.
M & L for submain (single phase) wiring complete with and including 4.0 sqmm two single core,(FRLSH) fire retardant, PVC insulated and unsheathed multistranded copper conductor cable, 1100 Volts grade, drawn through PVC conduit of suitable size including accessories and fixed on walls and 4 sqmm, fire retardant, PVC insulated, multistranded copper conductor cable for earthing and connected to common earth dolly complete all as specified and as directed by Engr-in-Charge. Note :- (i) Two runs of 4.0 sqmm PVC insulated wire and one run of 4 sqmm wire and one run of PVC conduit shall be measured as one unit length.
S & F MCB SPN, 5-32 Amps, 240 volts, breaking capacity 16KA complete all as specified and as dircted by Engr-in-charge.
M&L for submain wiring using 4 runs of single core FRLS PVC insulated, unsheathed stranded copper conductor cable of size 4runs of 10 Sqmm of voltage rating 1100V for three phase & neutral, drawn in and including concealed PVC conduit of dia not less than 25 mm dia with standard acessories, along with two run of FRLS PVC insulated, unsheathed, stranded copper conductor of size 2x 6.0 Sqmm as earth continuity conductor all as specified and directed(Note-4 runs of single core FRLS PVC cable 10sqmm for three phase & neutral with Two run of earth conductor as earth and conduit shall be measured as one unit) complete all as specified and as directed by Engineer-in-Charge.
Demolition of cement conc. In any description and inc any position not otherwise specially provided complete all as specified and directed by engr-in - charge.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by engr-in - charge.
Dismanting floor, hearth or wall tiling including cement mortar bedding and removal of rubbish out of the premises complete all as specified and directed by engr-in - charge.
Taking down cement plaster on brick or stone walls, including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed by engr-in - charge.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) size n.exc 1.5 sqm each complete all as specified and directed by engr-in - charge.
Taking down old rusted and damaged steel window /vents incl.guard bar and grill where exists of size not exc.1.5 sqm each complete all as specified and directed by engr-in - charge.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) size exc 1.5 sqm and n.exc 4 sqm each complete all as specified and directed by engr-in - charge.
Taking down shutters of any description n exc 1 Sqm each pane complete all as specified and directed by engr-in - charge.
Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed by engr-in - charge.
M&L in repair 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square of any thickness in each pane for metal frames complete all as specified and directed by engr-in - charge.
vikas builders
SUBHAM ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .