REPAIR/MAINT OF AVIATION LIGHT ALONG WITH CLEANING OF OH TANK, UG SUMP OF MG ROAD EAST AND WEST AND OTHER MISC WORK AT DIFFERENT PUMP HOUSES IN THE AREA OF AGE E/M EXT (WS) UNDER GE E/M LUCKNOW

Amount

Supply, laying in repair incluiding taking out & connecting PVC insulated, armoured, heavy duty electric cable with aluminium conductor 1100 volts grade 10 Sqmm 02 core with stranded aluminium conductor complete all as specified and as directed by Engineer-in-Charge. (Note :- Excavation & earth work will be measured and paid separately under respective item).

All as per item No 1 above but 50 Sqmm 3.5 Core

All as per item No 1 above but 70 Sq mm 3.5 core

Excavation in trenches not exc 1.5m wide and and not exc. 1.5m depth wide in soft/loose soil for laying electric cables/pipes etc including getting out excavated earth and trimming the sides and bottoms of trenches , complete all as specificed and directed by Engineer-in-Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches after the cables have been laid and tested, complete all as specified and directed by Engineer-in-Charge.

Removing excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.50 meter above the starting point , complete all as specified and directed by Engineer-in-Charge.

Supply and spread fine dry sand locally available for cable cushioning complete all as specified and as directed by Engineer-in-Charge.

Protection of cable with one layer of bricks laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class ‘B’ bricks, complete all as specified and as directed by Engineer-in-Charge.

M&L in repair aviation Light fitting 100 Watt 230 Volts 50 Hz yellow painted die-cast aluminium alloy housing, red coloured polycarbonate dome and accessories of O/H Tank at height 21 Mtrs to 26 mtrs complete all as specified and as directed by Engineer-in-Charge. MAKE BAJAJ CAT PART NO-024973 BJAOL 2 BC GLS 2 x 100W BC or equivalent make : CG/Phillips

S&F in repair MCB DB single pole with neutral sheet metal enclosure double door type, 240V,of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated ,powder coated complete with out MCB and with enclosure blank plates for unused way suitable for 02 way complete all as specified and as directed by Engineer-in-Charge.

S&F in repair MCB single pole & neutral 20 Amp rating 'C' Series 240 Volt complete all as specified and as directed by Engineer-in-Charge.

S&F PVC insulated & sheathed , heavy duty electric cable on RCC Pillar /Dome of over head tank at hight of 26 meter approximatelly from normal ground level incluiding fixing arrangement with Copper conductor,multi stranded 1100 volts grade Flate 3 core 04 Sqmm and taking out of existing unserviceable cable complete all as specified and as directed by Engineer-in-Charge.

S& F in replacement star delta starter fully automatic oil cooled with auto transformer and first filiing of transformer oil complete with suitable size of cable for connection between starter to auto tranformer suitable for 20 HP to 25 HP, 3 Phase, 415 V electric motor including necessary connection and fixed on stand made out of angle iron 40 X 40 X 4 mm size complete all as specified and as directed by Engineer-in-Charge. (Make: Bharat Cutler Hammer/Maxwell /JSL).

S&F cable joint kit suitable for 0.5 Sq mm 10 pairs of copper wire cable of water level indicator complete all as specified and as directed by Engineer-in-Charge.

Supplying, laying or fixing, jointing and testing solid PVC insulated , 10 pairs, individual shielded for interference rejection, armoured PVC sheathed 1100 Volts garde 0.5 sqmm instruemental cable ISI-5608 marked ,complete all as specified laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc. upto 28m height including taking out unserviceable cable complete all as specified and as directed by Engineer-in-Charge. Note :- Excavation, earth work, sand cushioning, protection bricks/ tiles/ block,Clamps, nuts , bolts, washers and pipe shall be measured and paid separately under appropriate items.

Wash out complete water by pumping set/manually of existing Underground sump/ static water tank up to 50000 gallons capacity including removing deposited sand from inside the tank, scrubbing and washing side walls and bottom with bleaching powder solution and making surface free from any fungus deposits stains using wire brush, filling of cavaties inside of tank with CM 1:1 with quick setting cement and applying two coat of white wash inside & writing date of cleaning complete all as specified and directed. Note:-1. All type of T & P, Labour & pumping set etc shall be arranged by the contractor and rate for the same will be deemed to be included in the quoted rate. 2. Contractor will dispose off the material taken out from the sump at a distance upto 50 Mtr complete all as specified and as directed by Engineer-in-Charge. 3. Contractor will clean the surroundings of Tank upto 3 mtr around the plinth of the tank.

All as per item No 16 above but cap upto 100000 GLNS

All as per item No 16 above but cap upto 200000 GLNS

All as per item No 16 above but cap upto 400000 GLNS

Cleaning inside RCC OH reservoirs capacity 400000 gallons at 22 metre staging including removing deposit sand from inside the tank scrubbing and washing side walls and bottom with bleaching powder solution and making surface free from any fungus deposits starins using wire brush filling of cavaties inside of tank with cm 1:1with quick cement and applying one coat of white wash inside including dome & writing date of cleaning complete all as specified and directed including repair to wash out system if required for proper flushing of over head tank. Note :-1. All type of T&P and Labour etc shall be arranged by the contractor and rate for the same will be deemed to be included in the quoted rate. 2. Contractor will dispose off the material taken out from the Tank at a distance upto 50 Mtr complete all as specified and as directed by Engineer-in-Charge. 3. Contractor will clean the surroundings of Tank upto 5 mtr around from the plinth of the tank.

All as per item No 20 above but tank capacity 200000 gallons

All as per item No 20 above but tank capacity 100000 gallons

All as per item No 20 above but capacity up to 50000 gallons

Taking out monoblock Pump set / Horizontal submersible pumping set upto 5 HP for FOUNTAIN at varrious location in catonment lucknow with connected item such as suction pipe cable etc including disconnecting mechanically and electrically complete all as specified and as directed by Engineer-in-Charge.

Transportation of monoblock Pump set / Horizontal submersible pumping set upto 5 HP from site (Lucknow Cantt) to contractor workshop and vice versa complete all as specified and as directed by Engineer-in-Charge.

Dismantling monoblock Pump set / Horizontal submersible pumping set upto 5 HP for repair and reassembling after repair complete all as specified and as directed by Engineer-in-Charge.

Rewinding of monoblock Pump and motor set / Horizontal submersible motor capacity 5 HP with Copper wire /PVC insulated copper wire of appropriate size, packing material etc including removal of unserviceable winding cleaning slots etc complete all as specified and as directed by Engineer-in-Charge.

All as per item No 27 above but cap 3 HP

All as per item No 27 above but cap 2 HP

All as per item No 27 above but cap 1 HP

Supply & replacement of PVC insulated three core submersible cable 2.5 Sqmm complete all as specified and as directed by Engineer-in-Charge. Make : Finolex / L&T./PLAZA

Supply & replacement of PVC insulated three core submersible cable 4.0 Sqmm complete all as specified and as directed by Engineer-in-Charge. Make : Finolex / L&T./PLAZA

Supply & replacement of DOL starter for single phase motor, 220 V upto 3 HP Motor complete all as specified and as directed by Engineer-in-Charge. Make : L&T / BCH.

Supply & replacement of DOL starter for single phase motor, 220 V 5 HP Motor complete all as specified and as directed by Engineer-in-Charge. Make : L&T / BCH.

M&L for brick work with Sub class 'B' bricks in CM 1:6 straight or curved on plan exceeding 6 metre mean radius built complete all as specified and as directed by Engineer-in-Charge.

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) complete all as specified and as directed by Engineer-in-Charge.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in surface channel & drain etc complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.

S&F GI nut, bolts each with 01 Nut and two Nos washers of any size and length complete all as specified and as directed by Engineer-in-Charge.

S&F terminal plate 3 phase six wire bakelite, star/delta connection as required at site with brass studs three nuts and two washers size 6 to 8 mm as per site requirement complete all as specified and as directed by Engineer-in-Charge.

S&F PVC fiber blades with split pin suitable for cooling system of motor to match with the fan cover as required at site for 3 HP to 5 HP motor complete all as specified and as directed by Engineer-in-Charge.

Cutting and threading MS column pipe 150/100/80 mm threading upto 75mm length or complete all as specified and as directed by Engineer-in-Charge.

S&F ball/roller/thurst bearing of electric motor/pump sets including turning, polishing and greasing etc for Thurst bearing No. 6220/6218 sizes (Make of bearing - SKF/NMC) complete all as specified and as directed by Engineer-in-Charge

All as per item No 43 above but Ball bearing No. 6314, 6315 ,6316.

All as per item No 43 above but Ball bearing No. 6311, 6312 ,6313.

All as per item No 43 above but Ball bearing No. 6308, 6309 ,6310.

All as per item No 43 above but Ball bearing No. 6201, 6202, 6203.

All as per item No 43 above but Ball bearing No. 6204, 6205, 6206.

Supply & replacement of gun metal bush bearing for upto 3 HP size of induction motor/pump including turning, polishing, greasing and remetaling of shaft etc complete all as specified and as directed by Engineer-in-Charge.

All as per item No 49 above but 5/7.5 HP

All as per item No 49 above but 10 HP & above

Supply and fixing Cast iron non return valve PN-1 flanged ends suitable for 150 mm bore including jointing material complete all as specified and as directed by Engineer-in-Charge. Make : Zoloto/Leader/BIR.

Supply and fixing Cast iron non return valve PN-1 flanged ends suitable for 200 mm bore including jointing material complete all as specified and as directed by Engineer-in-Charge. Make : Zoloto/Leader/BIR.

Painting of pipe lines with two coat of synthetic enamell paint as per colour code after cleaning and removing existing dust and dirt on existing painted surfaces complete all as specified and as directed by Engineer-in-Charge. of 100 mm bore vertical with over head tanks from GL upto 21 Mtr above GL sizes Note:- The rate for scafolding etc deemed to be included in the quoted rates.

All as per item No 54 above but 150mm bore vertical with over head tanks from GL upto 21 Mtr above GL

All as per item No 54 above but 150/200 mm bore horizontal/vertical pipe along with Sluice valve/ NRV at GL for header/inside/Outside of Pump House

All as per item No 54 above but 100/80 mm bore horizontal/vertical pipe along with Sluice valve/ NRV at GL for header/inside/Outside of Pump House

Sign writing on pipe/pillar/electrical control panel/DG Set & marking of indication for water supply installation Size of letter upto 25mm complete all as specified and as directed by Engineer-in-Charge.

All as per item No 58 above but Size of letter above 25mm upto 50mm

All as per item No 58 above but Size of letter above 50mm upto 75mm

All as per item No 58 above but Size of letter above 75mm upto 100mm

All as per item No 58 above but Size of letter above 100mm upto 200mm

Supply and fixing (in repair) Contactor ML-2, 3 pole, 415 Volt, 32Amps rating complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing (in repair) Contactor ML-3, 3 pole, 415 Volt, 40Amps rating complete all as specified and as directed by Engineer-in-Charge.

S&F ( in repairs) single phase preventor to prevent against single phasing, reverse phasing with wiring & testing complete all as specified and as directed by Engineer-in-Charge. Make : Havells/ Phillips or equivalent

Repair to pipe line inside the RCC OH reservoir at an approx height 25 Mtr above the normal GL for the Cutting in position 150 mm bore CI /DI pipe class 'B'/K-9 complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing in true vertical position CI /DI pipe 150mm bore class 'B'/k-9 (as per existing) in any length complete all as specified and as directed by Engineer-in-Charge.

Run lead joint/flanged/D-joint for CI pipe 150mm bore complete all as specified and as directed by Engineer-in-Charge.

CI Special as per site requirement complete all as specified and as directed by Engineer-in-Charge.

Cutting in position 200 mm bore CI /DI pipe class 'B'/K-9 complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing in true vertical position CI /DI pipe 200 mm bore class 'B'/k-9 (as per existing) in any length complete all as specified and as directed by Engineer-in-Charge.

Run lead joint/flanged/D-joint for CI pipe 200mm bore complete all as specified and as directed by Engineer-in-Charge.

Attending complaint to make automation system functional of 16 Nos pump houses (servicing and management distribution network) installed at various location at Lucknow cantt including replacement of mechanical/electrical/electronic parts and components of PLC based control panel complete all as specified and as directed by Engineer-in-Charge. (Make :- RDS/Simcom) Note :- (i) Maintenance daily under supervision of Engr-in-Charge. (ii) Fixing of defective spares/components are deemed to be included in the unit rate but cost of spares/components will be paid under respective items here in above.

GIAN ENGINEERS

S S TRADING CO

M/s Acme Engineers and Contractors

M/S AMARJIT SINGH