COMPREHENSIVE MAINT OF E/M AND B/R WORK OF VARIOUS HANGARS AT INS TUNIR AREA UNDER AGE B/R-II AT NAVAL STATION KARANJA

Amount

Dismantling of steel rolling shutter in any position in exc 10 sqm and not exc 30 Sqm including all fittings, complete all as specified and as directed by Engr-in-Charge.

Supply and Fix steel rolling shutter with gear operated type with chain wheel out and hand chain, thickness of laths 1.00mm as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete : gear operated type with bevel gear box and crank, complete all as specified and as directed by Engr-in-Charge.

Supply and Fix Steel rolling shutters, without ball bearing, thickness of laths 1.00mm as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as including all necessary parts etc as indicated , complete: push pull or manual type, complete all as specified and as directed by Engr-in-Charge.

Extra for wicket door including 4 lever mild steel safety lock lockable from both inside and outside (area of wicket door to be measured), complete all as specified and as directed by Engr-in-Charge.

Dismantling structural steel works in doors, gates etc but excluding framed truss etc , complete all as specified and as directed by Engr-in-Charge.

Supply and Fix premoulded cast iron gate of FE-150 confirming to IS ornamental type in cast iron cum mild steel of 6.20 span, 3.0m to 4.065m in height two leaves and wicket gate in cast iron cum mild steel of 1.5m span, 2.1m height in single leaf, including necessary welding, pintol hinges, steel ball bearing plates and locking arrangement , complete all as specified and as directed by Engr-in-Charge. Notes:- (a) Frame of cast iron gate shall be mild steel pipe frame of size 50mm x 50mm x 4.5mm thick conforming to grade Fe-410 or Fe-310. (b) RCC pillar/ brick pillar and painting to steel surface including all connected items shall be measured and paid separately under relevant items. (c) Design as per directed by Engr-in-Charge.

Supply and Fix framed work in doors or gates of angle or framed work such as grill, grating, etc, other section with gusset plates, rails, braces, etc, of grade Fe 410-W ( Gde E-250 ) quality A complete drill for fixing of steel sheeting or other covering . Doors, etc to be prepared by hanging and sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering , running, rails & guide) and hanging also fastening and fixing, complete all as specified and as directed by Engr-in-Charge.

Supply and Fix 1.25 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed/welded to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, complete all as specified and as directed by Engr-in-Charge.

Attending complaints in repair related to blacksmith work including repair of steel frames of doors and gates, by drilling or welding, resecuring of door or gate area exc 20 Sqm not exc 30 Sqm each etc complete all as specified and directed by Engineer in Charge

Taking down existing mild steel rolling shutters for and including replacing the slates, bottom lock plates, helical springs, side guides, sponge rubber gaskets, hood cover and side bracket etc wherever required and refixing in its original position after repairs including material and labour for greasing and mechanical old and new parts of rolling shutters complete all as per directed for shutters of area not exc 10 sqm each, complete all as specified and as directed by Engr-in-Charge.

-Ditto- all as per Item No 10.00 here-in-before but area of shutters exc 10 sqm and not exc 20 sqm each

-Ditto- all as per item No 10.00 but area of shutter exc 20sqm but not exc 50 sqm each Note for Item No 10,11 & 12 (i) Spare parts for Srl item No.10, 11 &12 will be measured and paid separately under relevant items and Rate quoted shall include for scaffolding to any height, covering etc, complete all as specified and directed by Engineer-in-charge

Supply and Fix factory fabricated mild steel (hardened) helical wire spring of size 300mm long, 80mm dia to match with existing, complete all as specified and as directed by Engr-in-Charge.

Supply and Fix factory fabricated mild steel (hardened) helical wire spring of size 450mm long, 80mm dia to match with existing, complete all as specified and as directed by Engr-in-Charge.

Supply and Fix factory fabricated mild steel (hardened) helical wire spring of size 600mm long, 80mm dia to match with existing, complete all as specified and as directed by Engr-in-Charge.

Supply and Fix factory fabricated new guide of rolling shutter made out of 1.25mm thick mild steel sheet of grade Fe-310 or Fe-410 of required length to match the existing one and including one shop coat of red oxide primer , complete all as specified and as directed by Engr-in-Charge.

Supply and Fix factory fabricated side brackets made out of 1.25mm thick mild steel of grade Fe-410 or Fe-310-0 to match with existing including one shop coat of red oxide primer, complete all as specified and as directed by Engr-in-Charge.

Supply and Fix factory fabricated new mild steel slates of 1mm thick of grade Fe-410-0 or Fe-310-0 to match with existing fitted with locking clips, riveted to slates including one shop of red oxide primer, complete all as specified and as directed by Engr-in-Charge.

Supply and Fix factory fabricated mild steel of grade Fe-410-0 or Fe-310-0 2.5mm thick bottom lock plate riveted and made of mild steel sheet of 1mm and welded with and including provision of standard locking arrangement welded to and including mild steel angle iron complete to match with existing with and including one shop coat of red oxide primer, complete all as specified and as directed by Engr-in-Charge.

Supply and Fix rubber sponge gasket of 20mm thick and 40mm width fixed with and including approved adhesive, complete all as specified and as directed by Engr-in-Charge.

Supply and Fix factory fabricated hood cover of mild steel 1mm thick hexagonal, square or circular shape fitted to existing angle iron stiffness at bottom edge and to bracket plate all as directed and applying one shop coat of red oxide primer, complete all as specified and as directed by Engr-in-Charge.

Supply and Fix mild steel factory made bevel gear box with machine cut gears suitable for rolling shutters, complete all as specified and as directed by Engr-in-Charge.

Supply and Fix mild steel pressed bevel handles 150mm long, oval type, enamelled black for rolling shutters, complete all as specified and as directed by Engr-in-Charge.

Supply and Fix mild steel safety lever lock with 4 levers for rolling shutters, complete all as specified and as directed by Engr-in-Charge.

Material and Labour in repair for Opening of rolling shutter hood cover, greasing to gears, helical spring and guide channels and refixing all accessories back in position of area not exc 10sqm each, complete all as specified and as directed by Engr-in-Charge.

Material and Labour in repair for Opening of rolling shutter hood cover, greasing to gears, helical spring and guide channels and refixing all accessories back in position of area exc 10sqm and not exc 20sqm each, complete all as specified and as directed by Engr-in-Charge.

Material and Labour in repair for Opening of rolling shutter hood cover, greasing to gears, helical spring and guide channels and refixing all accessories back in position of area exc 20sqm and not exc 50sqm each, complete all as specified and as directed by Engr-in-Charge.

Material and Labour for preparing new or previously untreated steel surface of any description over 10cm in width or girth and applying two coats of aluminium paint over one coat of aluminium red oxide primer, complete all as specified and as directed by Engr-in-Charge.

Material and Labour for preparing old painted steel surface of any description over 10cm in width or girth and applying one coats of aluminium paint, complete all as specified and as directed by Engr-in-Charge.

Material and Labour Painting to new steel surfaces including preparation applying one coat of red oxide primer and two coats of synthetic paint. complete all as specified and directed by Engineer-in-Charge

Supply and Fix Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed by Engr-in-Charge.

Demolition of stone/brick masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings dressed stone work and pre cast concrete articles, complete all as specified and as directed by Engr-in-Charge.

-Ditto- all as per item No 32.00 here-in-before but pre-cast concrete block walling complete all as specified and directed.

Material and Labour for pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width in type B1 (1:2:4) and setting in mortar (1:6), complete all as specified and as directed by Engr-in-Charge.

Material and Labour for brickwork with sub class 'B' bricks , straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and as directed by Engr-in-Charge.

-Ditto- all as per item No 35.00 here-in-before but except bricks. Note:- Serviceable bricks obtained from item No 32.00 shall be re-used in item No 36.00 after cleaning etc complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debris directed for a distance max upto 500m , complete all as specified and as directed by Engr-in-Charge.

Material and Labour for ready mix plaster rendering 10 mm thick in CM 1:4 on fair faces of brick/concrete surfaces , finished even and smooth without smoothing extra cement , complete all as specified and as directed by Engr-in-Charge. (Note:- Item rate shall be include any height of Bldgs for scaffolding as all arrangement.) (WPC will be paid and measured separately)

Material and Labour for ready mix plaster rendering 15 mm thick of brick work or concrete surfaces in CM 1:4 (Water proofing compound paid separately) finished even and fair surfaces without using extra cement, complete all as specified and directed by Engr-in-Charge. (Note:- Item rate shall be include any height of Bldgs for scaffolding as all arrangement.) (WPC paid and measured separately)

Material and Labour for ready mix plaster rendering 5 mm thick CM 1:3 on ceiling or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge. (Note:- Item rate shall be include any height of Bldgs for scaffolding as all arrangement.)

Material and Labour for applying three coats of white wash on newly plastered surfaces of ceilings including preparation of surface, complete all as specified and as directed by Engr-in-Charge.

Material and Labour for newly plastered surface and prepare the smooth surface with sand paper and applying two coats of royal acrylic distemper on walls or ceiling complete all as specified and as directed by Engineer-in-Charge

Material and Labour for applying 2mm thick exterior grade wall care putty on wall all as specified and directed by Engineer-in-Charge

Material and Labour for preparation of new or previously untreated plastered surfaces of walls and applying two coats of acrylic antifungal paint exterior grade paint plaint or camouflage pattern over one coat of primer, complete all as specified and as directed by Engr-in-Charge.

Supply only liquid water proofing compound mix cement concrete/ cement plaster as per manufacture instruction all as directed by Engr-in-Charge.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick below or above ground level un re-inforced, complete all as specified and as directed by Engr-in-Charge.

Material and Labour for PCC 1:4:8 type D2 using (40mm graded stone aggregate) as in foundations, fillings & mass concrete etc, complete all as specified and as directed by Engr-in-Charge.

Material and Labour for cement concrete 1:2:4 type B2 (using 40mm graded stone aggregate) as in surface channel or drain, complete all as specified and as directed by Engr-in-Charge.

Material and Labour for PCC 1:2:4 type B1 using (20 mm graded aggregate) as in roof kerbing, or mud stops, rounded or chamfered on edges and all around of chequered tile, complete all as specified and as directed by Engr-in-Charge.

Material and Labour for PCC (1:3:6) type C1 using 20mm graded stone aggregate in coping, bed block etc including necessary form work, complete all as specified and as directed by Engr-in-Charge.

Material and Labour for PCC 1:3:6, type C2 (using 40 mm graded agg) 75 mm thick as in plinth protection without using extra cement, complete all as specified and as directed by Engr-in-Charge.

Material and Labour for machine cut broken stone or boulders of gauge not exc 63mm as in hard core not exc 150mm thick spread and levelled including watering & ramming all as directed by Engr-in-Charge.

Material and Labour, for providing 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded aggregate in sub base of floor complete all as specified and directed by Engr-in-Charge.

Dismantling of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar, complete all as specified and as directed by Engr-in-Charge.

Material and Labour for Chequered cement concrete tiles 300x300x25mm thick, set jointed and pointed in near cement slurry in floors with grey cement and pigments in any colour machine pressed glazed , over cement screed bed 15mm thick cement motor 1:6, complete all as specified and as directed by Engr-in-Charge.

Material and Labour for 60mm Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade strength not less than M-35 of any description or thickness all as directed by Engr-in-charge.

Material and Labour for Sand filling under floors or in foundations including watering and consolidation, complete all as specified and as directed by Engr-in-Charge.

Supply and Fix 20mm thick granite (any type) machine cut laid over cement screed bed 15 mm thick in cm 1:6 and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including mirror polishing and bull nosing edging in any position etc all as directed by Engr-in-Charge.

Supply and Fix green marble 18 to 20 mm thick machine cut, jointing and pointing with white cement slurry including 20mm thick screed bed or bedding layer of mortar in CM 1:6, complete all as specified and as directed by Engr-in-Charge.

Material and Labour for 20-25 mm thick machine cut Kota stone slab flooring over cement screed bed 20mm thick in CM 1:6 and jointed with grey cement slurry mix with pigment to match the shade of slab including rubbing and polishing, complete all as specified and as directed by Engr-in-Charge.

Material and Labour 20-22 mm thick machine cut Kota stone sin riser of steps, skirting, dado, and pillar laid over cement mortar 10 mm thick 1:4 and jointed with grey cement slurry mix with pigment to match the shade of slab including rubbing and polishing complete all as directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided including doors, gates, complete all as specified and as directed by Engr-in-Charge.

Material and Labour for frame work such as grill, as in fencing posts, angle, grating etc with ends of bar shouldered and / or riveted or forged into spikes , framed guard bars , barred iron doors, ladders, framed balusters etc & similar work conforming to Fe-290 grade E1-65, complete all as specified and as directed by Engr-in-Charge. Note:- Posts/struts of angle iron made to shape shall be welded to existing angle iron bracket of security wall, contractor shall make his own arrangement for welding for boundary wall by using gen sets or any alternative arrangement all as specified and directed by Engr-in-Charge.

Supply and Fix for Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 Grade St-240, complete all as specified and as directed by Engr-in-Charge.

Supply and Fix of Bands, straps, supports or stays for rainwater, ventailing pipes, including bolts, if required hooks, heavy, for large gates, hook and pintle hinges; large hasps and stables; chains; hand made sliding bolts; clamps; hold fasts; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde -165. complete all as specified and directed by Engineer-in-charge.

Material and Labour for welding in repair, exc 2.5 cm but not exc 5 cm in length thickness of metal to be welded exc 20mm but not exc 25mm all as specified and directed by Engineer-in-Charge.

Material and Labour for running welding in repair exc 20mm but not exc 25mm, complete all as specified and as directed by Engr-in-Charge.

Material and Labour for preparation of old painted steel surfaces of any description not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge.

Dismantling plain or corrugated steel sheeting ,any gauge ,thickness including Nainital or similar pattern roof covering, complete all as specified and as directed by Engr-in-Charge.

Supply and Fix Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engr-in-Charge.

Supply and Fix pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engr-in-Charge.

Dismantling of floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises and removal to distace exc 1.0 km, complete all as specified and as directed by Engr-in-Charge.

Material and Labour for glazed ceramic coloured designer concept tiles matching with existing tile 350x250x7 or 450x350x7mm size as in walls set and jointed in neat cement slurry over 10mm thick recuing in cement mortar (1:3) and pointed in coloured cement to match for work on vertical surface such as skirting dado etc, complete all as specified and as directed by Engr-in-Charge.

Material and Labour for non skid ceramic coloured tile 7 to 8mm thick (square/rectangular area of each tiles exceeding 0.11 Square but not exceeding 0.18 Sqm in floor over 15mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the tile, complete all as specified and as directed by Engr-in-Charge.

Demolition of RCC as in slab, beam, chajja (other than ground floor) beams staircases, and similar all as specified and directed by Engr-in-Charge

Material and Labour for Reinforced cement concrete nominal mix type B-1, 1:2:4 as in chajjas and similar works all as specified and directed by Engr-in-Charge. Note:- Additives monobond paid and measured separately.

Material and Labour for Reinforced cement concrete nominal mix type B-1, 1:2:4 as in beams, cantilevers, bressummers, lintels over 1.5m span, columns, pillars, piers, posts and struts and similar works all as specified and directed by Engr-in-Charge. Note:- Additives monobond paid and measured separately.

Material and Labour for Formwork to chullah hoods, chajjas, troughs and similar items including edges all as specified and directed by Engr-in-Charge.

Material and Labour for Formwork to sides of concrete foundations, footings, columns and similar work all as specified and directed by Engr-in-Charge.

Material and Labour for 6 to 8 mm dia TMT bars, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed by Engr-in-Charge.

-Ditto- all as per item No 80.00 here-in-before but in 5 mm dia and over upto and including 10 mm dia in stirrups/binders complete all as specified and directed by Engr-in-Charge.

Supply only for Building up the profile of structural members by using latex additives(MONOBOND) modified air cured mortar system complete all as specified and directed by Engr-in-Charge.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc, complete all as specified and as directed by Engr-in-Charge.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 sqm not exceeding 4.0 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc, complete all as specified and as directed by Engr-in-Charge.

Supply and Fix for aluminium door/window/ventilator/partition, made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame & necessary jointing cleats, glazing clips, powder coated aluminium snap beading, screws etc, complete and also including powder coated aluminium fittings such as stainless steel hinges, tower bolts, hooks & eyes, peg stays and handles, concealed star lock for aluminium window, Mortice lock vertical type size 100mm 04 lever for door, rubber beading suitable for fixing 4mm / 5mm thick glass in aluminium window / doors including connected items, with and making good to the disturbed portion with its original specifications including taking down existing members/frame any position, complete all as specified and as directed by Engr-in-Charge.

Supply and Fix for aluminium anodised grill of design DG 104 pattern made out of 10mm dia rod fixed with and including standard aluminium frame of F section of size 23.40mmx15.30mm & 1.4mm thick all as per manufactures instructions, complete all as specified and as directed by Engr-in-Charge.

Supply and Fix for rubber beading suitable for fixing 4mm/ 5mm thick glass in aluminium window / doors etc, complete all as specified and as directed by Engr-in-Charge.

Supply and Fix 4mm thick sheet glass ordinary quality black glass colour, white or multicolour like black etc as directed by Engr-in-Charge and glazing with oil putty in square exc 0.5 Sqm in each pane with glazing pins complete all as specified and as directed by Engineer-in-Charge.

Supply and Fix 4 mm thick sheet glass , figured glass, pinhead type , glazing with oil putty area not exceeding 0.50 Square Metre each pane , complete all as specified and as directed by Engr-in-Charge.

Supply and Fix butt hinges size 100 mm Stainless steel hinges pin anodised and fixed, complete all as specified and as directed by Engr-in-Charge.

Supply and Fix 150 mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed all as specified and directed by Engr-in-Charge

Supply and Fix 300 mm long, 16mm dia stain less steel bright polished door sliding bolt hasp and staple type with fixing of clips 3 Nos with fixing with nut & bolt all as specified and directed by Engr in Charge.

Supply and Fix Extruded brass handles, fabricated type polished size of handle 150 mm , complete all as specified and as directed by Engr-in-Charge.

Supply and Fix two legged aluminium floor door stopper with rubber shoe 140mm long, complete all as specified and as directed by Engr-in-Charge.

Supply and Fix for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple, complete all as specified and as directed by Engr-in-Charge.

Supply and Fix for aluminium body hydraulically door closer regulated, designation No.3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed, complete all as specified and as directed by Engr-in-Charge.

Supply and Fix in repair double action floor spring hydraulically regulated made up to min 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty & fixed, complete all as specified and as directed by Engineer-in-Charge.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets, complete all as specified and as directed by Engr-in-Charge.

Supply and Fix PVC sheets, of 2mm thick laminated plain coloured, laid with approved rubber based adhesive in floors, complete all as specified and as directed by Engr-in-Charge.

Supply and Fix false ceiling with Armstrong XL 24mm grid system of grid size 600x600mm with 12 mm thick ceiling board of RH-90. including frame work made using aluminium T section of size (25mm x 25 mm, 19 gauge or 1mm thick) in square pattern of grid size of 600 x 600 mm. The aluminium frame work is supported from the ceiling with the help of GI wire/6 mm dia GI (upto 1200 mm length) adjusting and maintain for proper level to roof slabs by means of ceiling cleats made out of GE flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete etc. The aluminium frame work is supported on side wall with the use of aluminium 25 mm x 25 mm angles complete as per direction of Engr-in-charge, Manufacturer's specification & drawing.

Supply and Fix in repair 8 to 10mm thick Armstrong ceiling board of RH -90 false ceiling consisting of 600mm x 600mm insert existing frame work without disturbing the other false ceiling and making good existing frame with all as specified and directed by Engr-in-Charge.

Supply and Fix for PVC False ceiling consisting of 600 mm x 600 mm, 8-10mm thick prelaminated self design including frame work made using aluminium T section of size (25mm x 25 mm, 19 gauge or 1mm thick) in square pattern of grid size of 600 x 600 mm. The aluminium frame work is supported from the ceiling with the help of GI wire/6 mm dia GI (upto 1200 mm length) adjusting and maintain for proper level to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete etc. The aluminium frame work is supported on side wall with the use of aluminium 25 mm X 25 mm angles complete as per direction of Engr-in-charge, Manufacturer's specification & drawing.

Supply and Fix in repair 8 to 10mm thick PVC false ceiling consisting of 600mm x 600mm prelaminated self design insert existing frame work without disturbing the other false ceiling and making good existing frame with all as specified and directed by Engr-in-Charge.

Material and Labour for 2 mm thick polymer natural/ synthetic anti static flooring fire retardant compression moulding conductive flooring having electrical residence floor surface to earth between 50 kilo Ohms to 2.5 mega Ohms measured with wet electrode between 50 kilo Ohms to 2.5 mega Ohms measured with wet electrode in accordance with details contained in STEC pamphlet No 7 all as specified and fixed over and including copper strips grid work using 50mm x 0.5mm thick forming 0.9 Sqm grid, joints of copper strips, brazed on the existing surface including cleaning preparation of surface by passing with the suitable adhesive. The copper gird provided with diagonal earthing. The earthing resistance shall not exceed one ohm. The copper strips work shall be fixed to the existing floor at the 0.6m to 0.9 mm all as specified and as per manufacture instruction all as specified and directed including removing existing PVC flooring, complete all as specified and as directed by Engr-in-Charge. Make:- Natroyal Vinyl Industries Pvt. Ltd, Premier Polyfilm Ltd, Tankaria Industries Pvt Ltd, MS Curative Pvt Ltd, Brighton Enterprises or equivalent as approved by GE.

Supply and Fix double side writing informatory stainless steel reflective sign board size 4'x3' having with aluminium sheet base of 2mm thickness having retro reflective hi intensity prismatic duly laminated with laser colour printing tape base and front colour and matter like text, logos, shapes and Maps of sign board will be furnished by Engr-in-Charge. The frame of sign board should be 2 " outer dia square Stainless steel pipe of 304 SS grade of and having 2 legs of stainless steel square of 304 SS grade pipe 9 feet long each of 2" outer dia square pipe the board should be grouted in PCC work of size 300x300x450 mm including taking down of existing all as specified and directed by Engr-in-Charge.

Taking down carefully copper /aluminium point wiring (light, fan socket or power) through stove enamelled steel conduit/pvc conduits including complete fittings such as switches, ceiling roses, pendants, regulators, sockets,, switch sockets, electrical fittings etc removing and making good disturbed surfaces of walls/ceiling etc, all as specified and directed by Egr-in-Charge.

Material and Labour for point wiring with 1.5 Sqmm single core, multi stranded copper conductor 1100 V grade, ISI marked , PVC insulated unsheathed cable (with approved colour code) FRLSH cable drawn in casing caping of 25 mm wide, with double locking type, ISI marked including all accessories casing caping as approved by Eng-in-charge, with PVC 1.5 mm multi stranded insulated unsheathed FRLSH copper wire, ISI marked of green colour for continuous earth, including sunken box made out of suitable thickness and not less than 60 mm in depth GI/MS/ pressed steel terminal box to be concealed in wall, duly painted including 3mm hylam /masonite sheet cover, for mounting of fittings like switches, sockets, fan regulators etc. fixed with galvanised screw and cup washer, complete all as specified and directed by Engr-in-Charge, for One light point or one fan point controlled by one switch. Note : Wiring to be done as per approved colour code.

-Ditto - all as per item No 107.00 here-in-before but One light point controlled by 2 way switch SP, 5 Amp, 240 Volts

-Ditto - all as per item No 107.00 here-in-before but one 5 amp socket point on same board

-Ditto - all as per item No 107.00 here-in-before but one 5 amp multi socket, independent

-Ditto - all as per item No 107.00 here-in-before but using 2.5 sqmm ( nominal area) multistranded FRLSH copper conductor cable/wire & 2.5 sqmm size PVC insulated unsheathed copper conductor cable for earth continuity ( green colour) for one 5 pin socket outlet 5 / 15 Amp multi purpose independent point controlled by 15 Amp switch, SP one way, 240 Volts & Socket, complete all as specified and directed by Engr-in-Charge.

-Ditto - all as per item No 107.00 here-in-before but using 4 sqmm (nominal area) FRLSH multistranded copper conductor cable/wire for one 5/15 Amp socket point controlled by 15 Amp switch, SP one way 240 Volts & Socket, complete all as specified and directed by Engr-in-Charge.

Supply and fixing switch piano type flush button type single pole one way 5 Amps 240V front operated, complete all as specified and directed by Engr-in-Charge.

Supply and Fix Switch socket combination 2 in 1, 3 pin, 5 A and 15Amp flush type universal, complete all as specified and directed by Engr-in-Charge.

Supply and Fix socket 3 pin 5 A flush type, complete all as specified and directed by Engr-in-Charge.

Supply and Fix Bell buzzer 240V 50 Hz, complete all as specified and directed by Engr-in-Charge.

Supply and Fix Bell push 240V 50 Hz, complete all as specified and directed by Engr-in-Charge.

Supply and Fix ceiling rose PVC/polycarbonate, isolated body surface Bakelite 65mm dia three terminals, complete all as specified and directed by Engr-in-Charge.

Supply and Fix repair/replacement switch piano flush button single pole one way, 6 Amp (ISI marked) complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repair/replacement Switch socket outlet 2 in 1, 3 pin, 6 Amp flush type (ISI marked) complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repair/replacement Socket outlet 2 in 1, 3 pin, 6 Amp flush type (ISI marked) complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repair/replacement Switch bell push flush type 5 Amp (ISI marked) all as per complete all as specified and directed Engineer-in-Charge.

Supply and Fix in repair/replacement Switch socket combination outlet 15 Amp, 5-in-1, controlled by one switch (ISI marked) complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repair/replacement Switch flush button, single pole two way, 6 Amp (ISI marked) complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repair/replacement Socket type EME fan 5 step regulator switch/socket type for ceiling fan of suitable size, complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repair/replacement Lamp holder/angle holder insulated body with black/white plate for batten fittings, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement modular step type fan regulator 120 watt ,AC, 220V, 50 Hz ,ISI marked all specified and directed.

Supply and fix in repair/replacement modular switch 1 module 6 amp one way ISI marked, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement modular switch 1 module 16 amp one way, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement modular socket 2 module universal type 5/6 amp one way, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement modular socket 2 module universal type 6/16 amp one way, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement modular bell push 6A 1 module, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement Bell buzzer, ding dong AC,230V, 50 Hz single pole, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement modular cover plates with frame up From 1 /2 to 3 module as per site requirements, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement modular cover plates with frame up from 4 to 12 module as per site requirements, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement modular metal flush box as per site requirements from 1/2 to 3 modules, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement modular metal flush box as per site requirements from 4 to 12 modules, complete all as specified and directed by Engr-in-Charge.

Material and Labour for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLSH cable of 4.0 Sqmm (with colour code), drawn in but including non metallic rigid PVC conduit of 25mm dia/casing capping/ suitable size , ISI marked including one run of PVC insulated unsheathed, multistranded copper conductor FRLSH cable of 4.0 Sqmm (Green colour) as continuous earth conductor cable connected to earth dolly in surfaces/ recess complete including taking down, complete all as specified and directed by Engr-in-Charge.

Material and Labour for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLSH cable of 6.0 Sqmm (with colour code), drawn in but including non metallic rigid PVC conduit of 25mm dia/casing capping/suitable size, ISI marked including one run of PVC insulated unsheathed, multistranded copper conductor FRLSH cable of 6.0 Sqmm (Green colour) as continuous earth conductor cable connected to earth dolly in surface/ recess complete including taking down, complete all as specified and directed by Engr-in-Charge.

Material and Labour for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLSH cable of 10.0 Sqmm (with colour code), drawn in but including non metallic rigid PVC conduit of 25mm dia/casing capping/suitable size, ISI marked including one run of PVC insulated unsheathed, multistranded copper conductor FRLSH cable of 10.0 Sqmm (Green colour) as continuous earth conductor cable connected to earth dolly in surface/ recess complete including taking down, complete all as specified and directed by Engr-in-Charge.

Material and Labour for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLSH cable of 4.0 Sqmm (with colour code), drawn in existing surface/ recessed steel/ PVC conduit/ PVC casing capping/suitable size, including one run of PVC insulated unsheathed, multistranded copper conductor FRLSH cable of 4.0 Sqmm (Green colour) as continuous earth conductor cable connected to earth dolly in complete including taking down, complete all as specified and directed by Engr-in-Charge.

Material and Labour for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLSH cable of 6.0 Sqmm (with colour code), drawn in existing surface/ recessed steel/ PVC conduit/ PVC casing capping/suitable size, including one run of PVC insulated unsheathed, multistranded copper conductor FRLSH cable of 6.0 Sqmm (Green colour) as continuous earth conductor cable connected to earth dolly, complete all as specified and directed by Engr-in-Charge.

Material and Labour for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLSH cable of 10.0 Sqmm (with colour code), drawn in existing surface/ recessed steel/ PVC conduit/ PVC casing capping, including one run of PVC insulated unsheathed, multistranded copper conductor FRLSH cable of 10.0 Sqmm (Green colour) as continuous earth conductor cable connected to earth dolly in complete including taking down, complete all as specified and directed by Engr-in-Charge.

Material and Labour for cutting of wall/ceiling/column for laying submain of any size including plastering ,white wash, complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED building security light fitting with suitable size bracket/angle with three core flexible wire to fit security light of 45 w IP 66 protection LED, complete all as specified and directed by Engr-in-Charge.

Supply and fix LED batten with 20/22W LED tube light in wall/surface connecting with all required accessories like PVC box base, flexible cable from ceiling rose etc Surface and wall mounted LED batten, Engineering plastic batten with accessories complete all as directed and specified by Engr-in-charge.

Supply and Fix double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 100 Amps rated bus bar 12 way double door open able, including taking out old unserviceable MCB DB any size/type, complete all as specified and directed by Engr-in-Charge.

Supply and Fix double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 100 Amps rated bus bar 8 way double door open able, including taking out old unserviceable MCB DB any size/type, complete all as specified and directed by Engr-in-Charge.

Supply and Fix double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 100 Amps rated bus bar 4 way ,including taking out old unserviceable MCB DB any size/type, complete all as specified and directed by Engr-in-Charge.

Supply and Fix double door MCB VTPN DB 4 Way made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 100 Amps rated bus bar 4 way ,including taking out old unserviceable MCB DB any size/type, complete all as specified and directed by Engr-in-Charge.

Supply and Fix double door MCB TPN DB 4 Way made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 100 Amps rated bus bar 4 way ,including taking out old unserviceable MCB DB any size/type, complete all as specified and directed by Engr-in-Charge.

Supply and Fix double door MCB VTPN DB 8 Way made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar 4 way ,including taking out old unserviceable MCB DB any size/type, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement 6 to 32 AMP MCB single pole 240 V 10 KA (C-Series), complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement SPN 32 AMP ,240 V 10 KA (C-Series) , complete all as specified and directed by Engr-in-Charge.

Supply and fix LED recess/surface mounted 2x2 luminaire 36W fitting, 220 V, AC, 50 Hz suitable surge protection, high power factror, driver etc complete including flexible wire and connected accessories all as specified and directed by engr-in-charge.

Supply and fix LED Bulk head fittings 9/10W luminaire including LED light driver holder 220 V, AC,50HZ connecting up with three core flexible copper conductor cable of suitable size complete with all accessories complete all as specified and directed by Engr-in-charge.

Supply and Fix in repair/replacement LED tube rod 20/22 watt, 220V,AC, 50Hz change with existing any tube rod including flexible wire and connected accessories , complete all as specified and directed by Engr-in-Charge.

Supply and Fixix in repair/replacement Batten MS suitable for 18/22/24W LED rod 220V,AC, 50Hz with accessories including suitable 1.5 sqmm 2 core wire for connecting with ceiling rose, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement LED batten 10W, 2 feet with LED tube light 220V,AC, 50Hz in wall/surface connecting with all required accessories like flexible cable from ceiling rose etc as directed and specified by Engr-in-charge.

Supply and Fix in repair/replacement MCCB 4 pole, thermal magnetic release range 100 Amps of breaking capacity 16 kA, 415 Volts, 50 Hz, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement MCCB 4 pole, thermal magnetic release range 125 Amps of breaking capacity 16 kA, 415 Volts, 50 Hz, complete all as specified and directed by Engr-in-Charge.

Material and Labour for daily complaint checking & repairing of DBs/meter panel board/circuits/submain wiring/switches/sockets etc and other connected work including rectification of faults , complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement MCCB 4 pole, thermal magnetic release range 63 Amps of breaking capacity 16 kA, 415 Volts, 50 Hz, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement MCCB 4 pole, thermal magnetic release range 40 Amps of breaking capacity 16 kA, 415 Volts, 50 Hz, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement three pin top of capacity 15 amp , AC, 220V, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement PCRD plug of capacity 15 amp , AC, 220V, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement of old existing sunken/terminal box of size approx 10x10cm, concealed/surface mounted alongwith hylam sheet for fixing existing switches, sockets & regulators etc and making good disturbed surfaces of walls, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement of old existing sunken/terminal box of size approx 15x7.5cm, concealed/surface mounted alongwith hylam sheet for fixing existing switches, sockets & regulators etc and making good disturbed surfaces of walls, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement of old existing sunken/terminal box of size approx 20x15cm, concealed/surface mounted alongwith hylam sheet for fixing existing switches, sockets & regulators etc and making good disturbed surfaces of walls, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement of old existing sunken/terminal box of size approx 20x25cm, concealed/surface mounted alongwith hylam sheet for fixing existing switches, sockets & regulators etc and making good disturbed surfaces of walls , complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement emergency bulb LED 10W, 230V, 50Hz, with 2/4 hour backup, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement round/square type, recessed /surface 12W/14W warm white LED downlight dimmable with high lumen 230V, compatible with Legrand Dimmer as per sample as directed by Engr-in-charge.

Supply and Fix in repair/replacement RCCBs 63 Amps double pole 100mA breaking capacity, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement RCCBs 40 Amps double pole 100mA breaking capacity, complete all as specified and directed by Engr-in-Charge.

Supply and fix decorative light suitable for holder B-22/E-27, complete all as specified and directed by Engr-in-Charge.

Material and Labour for taking out and refixing of tube light, mirror light etc after cleaning and any type rectifying defect, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement LED batten with 20/22W LED tube light (four feet) with sensor in wall/surface connecting with all required accessories like PVC box base, flexible cable from ceiling rose etc Surface and wall mounted LED batten, Engineering plastic batten with accessories complete all as directed and specified by engr-in-charge.

Supply and fix in repair/replacement LED batten with 9/10 W LED tube light two feet mirror type with sensor in wall/surface connecting with all required accessories like PVC box base, flexible cable from ceiling rose etc Surface and wall mounted LED batten, Engineering plastic batten with accessories complete all as directed and specified by engr-in-charge.

Supply and fix in repair/replacement LED batten with 20W LED tube light (four feet) with inverter type with 2 hrs backup in wall/surface connecting with all required accessories like PVC box base, flexible cable from ceiling rose etc Surface and wall mounted LED batten, Engineering plastic batten with accessories complete all as directed and specified by engr-in-charge.

Supply and fix in repair/replacement LED bulb of 9/10 watt, complete all as specified and directed by Engr-in-Charge.e

Material and Labour for servicing and cleaning of geyser of any capacity including taking out from existing position and refixing , complete all as specified and directed by Engr-in-Charge.

Material and Labour for checking ceiling fan of size 1200/1400mm and change defective part cotter pin/ nut bolt etc, complete all as specified and directed by Engr-in-Charge.

Material and Labour for earthing complete with GI earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below the normal ground level connected with GI strip 32 x 6 mm by means of bolts, nuts, check nuts & washers of galvanised iron steel including necessary excavation and earth work in any type of soil, removing surplus soil to a distance not exc 50 m, with and including PCC chamber in PCC (1:2:4) , type B1, using (20 mm graded stone aggregate), mild steel angle iron frame made out of MS angle iron of size 40x40x6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6mm thick CI cover with handle, watering arrangement with funnel internally secured with wire mesh with 20 mm dia medium grade pipe for watering ,40 mm dia light grade GI pipe for lead protection in & including alternate layers of charcoal dust and common salt complete all as shown in electrical plate No 3 of SSR Part-1(2009) connected to earthing test point all as specified and indicated including testing on completion, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair GI strip 32mm x 6 mm saddle in wall for loop earthing and ground grid, complete all as specified and directed by Engr-in-Charge.

Supply and fix fan rod of size 1/1.5 feet suitable for mounting ceiling fan of size 1200/1400 mm, complete all as specified and directed by Engr-in-Charge.

Supply and fix flexible wire 1 sqmm x 2 core including taking out, complete all as specified and directed by Engr-in-Charge.

Supply & fixing, jointing, connecting & testing in saddle on wall 10 sqmm X 2 core, XLPE/PVC insulated PVC sheathed cable heavy duty 1100 volts grade, aluminium conductor in trenches / ducts/ of the following sizes including taking out cable cover & cable, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement modular type AC box with three pin socket and plug top and 20 amp single pole MCB, complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repairs/replacement air termination single pointed aluminium rod 12 mm dia and 300 mm long with necessary fixing arrangement on blocks on roof, complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repairs/replacement air termination single pointed aluminium rod 12 mm dia and 1000 mm long with necessary fixing arrangement on blocks on roof, complete all as specified and directed by Engr-in-Charge.

Supply and Fix test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm thick drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screws fixed to GI strip bracket fixed to porcelain insulator in wall as in repairs, complete all as specified and directed by Engr-in-Charge. Note :- Porcelain insulator will be measured & paid for separately.

Supply and Fix vitreous china porcelain insulator with busbar support white type, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement HIGH BAY LED lights hanging/ceiling mounting type 100W fitting with PC diffuser with surge protection on existing light point with suitable hanging arrangements one light control with one MCB SP, complete all as specified and directed. Note: The rates includes taking down old light fitting and providing suitable necessary ladders /equipments for any height to taking down the items, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement Low BAY LED lights hanging/ceiling mounting type 40w fitting with PC diffuser with surge protection on existing light point with suitable hanging arrangements one light control with one MCB SP, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement flame proof light hanging/ceiling mounting type 60W fitting with PC diffuser with surge protection on existing light point with suitable hanging arrangements one light control with one MCB SP, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement flame proof light hanging/ceiling mounting type 100W fitting with PC diffuser with surge protection on existing light point with suitable hanging arrangements one light control with one MCB SP, complete all as specified and directed by Engr-in-Charge.

Material and Labour for testing of Lightning Conductor & earthing except new earthing 183 & 184 here-in-before of various Tech Accn in NAD area & Tunir Area in the presence of users representative & Engineer-in-Charge & maintaining record of tests for lightning conductor as per IAFW -2215 by removing all connection and the resistance of earthing & lightning protection network should not exceed 5 Ohm in every technical building showing the details of defective earthing & lightening protection system. Items to be repaired/renewal during record of sets for lightening conductors as per IAFW 2215 & also test results to be recorded after repair/renewal and should be signed by users also Notes :- (i) The earthing showing result beyond 10 ohm to be renewed and shall be measured & paid for separately under relevant item of Sch 'A'. (ii) The test result after renewal of earthing and replacement of defective conductor also be recorded in earthing test book as per IAFW-2215 for lightening conductor & cost for the same is deemed to be included in unit rate of above item. (iii) The unit rate quoted shall be deemed to be included for the test results of all existing earthing point, date of testing and renewal etc to be written on wall of each building in clear format like stenzil etc as per direction from engr-in-charge with out any extra cost. (iv) The testing of new earthing covered under item Nos 183 & 184 here-in-before are not covered in this item.

Removing existing worn out CI cover with angle iron frame of earth chamber and supply and fix new CI cover of size 30 cm x 30 cm x 6 mm thick fixed in frame made out of mild steel angle iron 40 mm x 40 mm x 6 mm thick with and including locking and lifting arrangement, painting with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed by Engr-in-Charge.

Supply and Fix 40 mm dia GI pipe medium grade for post not exceeding 3 metres in length truly vertical position embedded in PCC including not exc and earth work as in repairs, complete all as specified and directed by Engr-in-Charge. Note : PCC of pole embedded will be measured and paid separately under relevant items of Sch.

Material and Labour for PCC (1:2: 4) type B0, using (12.5 mm graded stone aggregate) of blocks size and IE rules including necessary use and waste of form work as in grounding of porcelain insulator, complete all as specified and directed by Engr-in-Charge.

Material and Labour for PCC (1:2:4) type B1, using (20 mm graded stone aggregate) for earth chambers as in repairs, coping for GI pipe post including necessary form work, excavation in soft loose soil, returning in filling and removing surplus soil to a distance not exc 50 metres and depositing where directed, complete all as specified and directed by Engr-in-Charge.

Removing & refixing of air termination single pointed aluminium rod 12 mm dia and 300 mm long by tightening with necessary fixing arrangement fixed on existing/new PCC blocks on roof and making good, complete all as specified and directed by Engr-in-Charge.

Material and Labour for repair/replacement of Submain wiring with two core 1100 volts 1.5 sqmm FRLSH size PVC insulated PVC unsheathed stranded copper conductor using colour code drawn through and including stove steel enamelled conduit 20 mm dia with accessories like flame proof bend, flame proof junction box etc complete all as specified in and including 1.5 sqmm PVC insulated PVC unsheathed FRLSH copper conductor in cable for continuous earth continuity conductor by using green colour to common earth and connecting to earth point and connecting to earth dolly, complete all as specified and directed by Engr-in-Charge.

Material and Labour for repair/replacement of Submain wiring with two core 1100 volts 1.5 sqmm FRLSH size PVC insulated PVC unsheathed stranded copper conductor using colour code drawn through and including in existing stove steel enamelled conduit 20 mm dia with accessories like flame proof bend, flame proof junction box etc complete all as specified in and including 1.5 sqmm PVC insulated PVC unsheathed FRLSH copper conductor in cable for continuous earth continuity conductor by using green colour to common earth and ,connecting to earth point and connecting to earth dolly, complete all as specified and directed by Engr-in-Charge.

Material and Labour for repair/replacement Submain wiring with two core 1100 volts 2.5 sqmm FRLSH size PVC insulated PVC unsheathed stranded copper conductor using colour code drawn through and including stove steel enamelled conduit 20 mm dia with accessories like flame proof bend, flame proof junction box etc complete all as specified in and including 2.5 sqmm PVC insulated PVC unsheathed FRLSH copper conductor in cable for continuous earth continuity conductor by using green colour to common earth and connecting to earth point and ,connecting to earth dolly, complete all as specified and directed by Engr-in-Charge.

Material and Labour for repair/replacement Submain wiring with two core 1100 volts 2.5 sqmm FRLSH size PVC insulated PVC unsheathed stranded copper conductor using colour code drawn through and including in existing stove steel enamelled conduit 20 mm dia with accessories like flame proof bend, flame proof junction box etc complete all as specified in and including 2.5 sqmm PVC insulated PVC unsheathed FRLSH copper conductor in cable for continuous earth continuity conductor by using green colour to common earth and connecting to earth point and, connecting to earth dolly, complete all as specified and directed by Engr-in-Charge.

Material and Labour repair/replacement submain with TWO core 1100 volts 4 sqmm 2 CORE FRLSH size PVC insulated PVC unsheathed stranded copper conductor using colour code drawn through and including stove steel enamelled conduit 20 mm dia with accessories like flame proof bend, flame proof junction box etc complete all as specified in and including 4sqmm PVC insulated PVC unsheathed FRLSH copper conductor in cable for continuous earth continuity conductor by using green colour to common earth and connecting to earth point and , connecting to earth dolly, complete all as specified and directed by Engr-in-Charge.

Material and Labour for repair/replacement Submain wiring with TWO core 1100 volts 4 sqmm 2 CORE FRLSH size PVC insulated PVC unsheathed stranded copper conductor using colour code drawn through and including in existing stove steel enamelled conduit 20 mm dia with accessories like flame proof bend, flame proof junction box etc complete all as specified in and including 4 sqmm PVC insulated PVC unsheathed FRLSH copper conductor in cable for continuous earth continuity conductor by using green colour to common earth and connecting to earth point and , connecting to earth dolly, complete all as specified and directed by Engr-in-Charge.

Material and Labour repair/replacement Submain wiring with four core 1100 volts 10 sqmm FRLSH, size PVC insulated PVC unsheathed stranded copper conductor using colour code drawn through stove steel enamelled conduit 19/20 mm dia with accessories like flame proof bend, flame proof junction box etc complete all as specified in and including 10 sqmm PVC insulated PVC unsheathed FRLSH copper conductor in cable for continuous earth continuity conductor by using green colour to common earth and connecting to earth point and connecting to earth dolly, complete all as specified and directed by Engr-in-Charge.

Material and Labour repair/replacement Submain wiring with four core 1100 volts 10 sqmm FRLSH size PVC insulated PVC unsheathed stranded copper conductor using colour code drawn through existing stove steel enamelled conduit 20 mm dia with accessories like flame proof bend, flame proof junction box etc complete all as specified in and including 4 sqmm PVC insulated PVC unsheathed FRLSH copper conductor in cable for continuous earth continuity conductor by using green colour to common earth and connecting to earth point and connecting to earth dolly, complete all as specified and directed by Engr-in-Charge.

Material and Labour repair/replacement Submain wiring with two core 1100 volts 10 sqmm FRLSH size PVC insulated PVC unsheathed stranded copper conductor using colour code drawn through and including stove steel enamelled conduit 20 mm dia with accessories like flame proof bend, flame proof junction box etc complete all as specified in and including 4sqmm PVC insulated PVC unsheathed FRLSH copper conductor in cable for continuous earth continuity conductor by using green colour to common earth and connecting to earth point and connecting to earth dolly all specified and directed in charge.

Material and Labour repair/replacement Submain wiring with two core 1100 volts 10 sqmm FRLSH size PVC insulated PVC unsheathed stranded copper conductor using colour code drawn through existing stove steel enamelled conduit 20 mm dia with accessories like flame proof bend, flame proof junction box etc complete all as specified in and including 4 sqmm PVC insulated PVC unsheathed FRLSH copper conductor in cable for continuous earth continuity conductor by using green colour to common earth and connecting to earth point and connecting to earth dolly, complete all as specified and directed by Engr-in-Charge.

Material and Labour repair/replacement Submain wiring with TWO core 1100 volts 6 sqmm FRLSH size PVC insulated PVC unsheathed stranded copper conductor using colour code drawn through and including stove steel enamelled conduit 20 mm dia with accessories like flame proof bend, flame proof junction box etc complete all as specified in and including 4sqmm PVC insulated PVC unsheathed FRLSH copper conductor in cable for continuous earth continuity conductor by using green colour to common earth and connecting to earth point and connecting to earth dolly, complete all as specified and directed by Engr-in-Charge.

Material and Labour for repair/replacement Submain wiring with two core 1100 volts 6 sqmm FRLSH size PVC insulated PVC unsheathed stranded copper conductor using colour code drawn through existing stove steel enamelled conduit 20 mm dia with accessories like flame proof bend, flame proof junction box etc complete all as specified in and including 4 sqmm PVC insulated PVC unsheathed FRLSH copper conductor in cable for continuous earth continuity conductor by using green colour to common earth and connecting to earth point and, connecting to earth dolly, complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement FLP TPN DB 4 way, 220V , 50 Hz ,AC and fixing arrangement incomer MCB 4P 63amp/100 Amp and outgoing MCB SP 12 NOs bus bar 200 Amp including taking down of DB complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement FLP SPN DB 12 way, 220V , 50 Hz ,AC and fixing arrangement incomer MCB 2P and outgoing MCB SP 10 NOs bus bar 100 Amp including taking down of DB complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement FLP LED Type tube light fitting 1X 18/20 watt ,four feet ,220V , 50 Hz ,AC and fixing arrangement including taking down of existing FLP tube light complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement FLP LED Type tube light fitting 2X 18/20 watt ,four feet ,220V , 50 Hz ,AC and fixing arrangement including taking down of existing FLP tube light complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement FLP plugin switch 10/16A ,220V, 50 Hz ,AC and fixing arrangement including taking down of existing FLP switch socket complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement FLP plugin socket 25A , 3pin (2P+E) , 220V, 50 Hz ,AC and fixing arrangement including taking down of existing FLP switch socket complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement FLP plugin socket 32A , 5pin (4P+E) , 50 Hz ,AC and fixing arrangement including taking down of existing FLP switch socket complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement FLP plugin socket 16A , 3pin (2P+E) , 220V, 50 Hz ,AC and fixing arrangement including taking down of existing FLP switch socket complete all as specified and directed by Engr-in-Charge.

Supply and Fix in repair/replacement FLP FLEXIBLE metallic hose conduit 1000 mm long for 19/20 mm dia fixed on directed place, complete all as specified and directed by Engr-in-Charge.

Supply and Fix repair FLP junction box 4 way 100mm including all connected accessories, complete all as specified and directed by Engr-in-Charge.

Supply and Fix repair FLP bend 19/20mm including all connected accessories, complete all as specified and directed by Engr-in-Charge.

Supply and Fix aluminium strip of size 25 x 3.15 mm fixed with suitable saddle, Supply and Fixing screw etc on roof with rubber & bitumen washer & fixed to insulator on wall for down conductor as fixed in repairs, complete all as specified and directed by Engr-in-Charge.

Re fixing in repair only aluminium strip of size 20/25 mm x 3.15 mm fixed to porcelain insulator fixed with suitable saddle, Supply and Fixing screws etc for roof with rubber & bitumen washer & fixed to insulator only on wall for down conductor, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair/replacement two way sheet metal enclosure with three pin socket and plug top and 20 amp single pole MCB, complete all as specified and directed by Engr-in-Charge.

Shri Krishna Trading Corporation (BID ID -3372252)

OM ENTERPRISES (BID ID -3372513)

S.P.TRADERS (BID ID -3374930)

M.K Enterprises (BID ID -3373833)

EVEREST CONSTRUCTION (BID ID -3373926)

Sagar Electricals (BID ID -3374762)

Advait Enterprises (BID ID -3373903)

LAXMI ENTERPRISES (BID ID -3374868)

pk Enterprises (BID ID -3374895)

VARDHAMAN CONSTRUCTION COMPANY (BID ID -3374569)