MISCELLENEOUS MAINTENANCE REPAIRS TO OTM ACCN FDT, ARMY SCHOOL, KAUTILYA HALL, SAHYADRI AUDITORIUM AND HQ SCHOOL OF ARTY IN THE AREA OF AGE B/R CENTRAL UNDER THE AOR OF GE DEOLALI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M & L for Vitrified ceramic tiles (light shade) 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. with and including 15mm thick screed bed in CM 1:6 ,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed.

Ditto all as per sl item no. 2 above but in skirting over 10mm thick backing coat in CM 1:4 complete all as specified and directed

M & L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes etc complete all as directed.

Ditto all as per item no.4 above but in skirting over 10mm thick backing coat in CM 1:4 complete all as specified and directed

M & L for joint free non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.11 but n exc 0.18 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over and including 15mm screed in CM 1:6 or with chemical cement to match all as directed.

Ditto all as per item No.6 above but in skirting over 10mm thick backing coat in CM 1:4 complete all as specified and directed

M & L for joint free non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.06 but n exc 0.11 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over and including 15mm screed in CM 1:6 or with chemical cement to match all as directed.

M&L for joint free coloured glazed ceramic tiles in vertical surface of size 450X 350X 7mm thick of different shade colour and pattern as approved, over and including 10 mm thick rendering in CM 1:4 as backing coat finished to receive wall tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed and specified.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed

M&L for PCC 1:2:4 (20mm graded stone aggregate) Type B1 as in levelling course below stone slab/tiles complete all as specified and directed

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate ) as in subase finished to receive floor treatment etc complete all as directed.

M & L for chequered cement concrete tiles rubber moulded , 30cm x 30cm x 25mm thick confirm to IS 13801-1993 , set jointed & pointed in neat cement slurry with grey cement and pigment in floors complete all as specified and directed

M&L for Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes

S&L machine pressed precast concrete interlocking paver block rubber moulded, any shape and size confirming ti IS-15658-2006 of 60mm thickness grey cement and with pigment , M-35 grade complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation

Demolition of stone slabs, paving stones and tiles of any description and thickness in floors, aprons, laid, bedded and pointed in any mortar complete all as specified and directed.

M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete incl screed bed 15mm thick in CM 1:6 complete all as specified and directed.

All as per sl.item no. 18 above but in riser of steps, skirting, dado and pillar laid over cement and including 10mm thick CM 1:4 backing coat complete all as specified and directed.

M & L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20mm thick screed base (1:6) including rubbing and polishing complete all as specified.

M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes complete all as specified.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including screed bed in CM 1:6 or bedding layer of mortar 20 mm thick for laying floor finishes complete all as specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets all as specified and directed.

S&F anodised/powder coated aluminium alloy interlocking snap grid 600mm x 600mm consists of Min Tee runners of size 38mm x 25mm x 1.5mm and cross Tee of size 25mm x 25mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 2mm fixed to wall perimetrs at 450mm centres and shall confirm to IS 733, IS 1285 with and including hangers of 6 mm dia. G.I. (upto 1200mm length and 1200mm centres) adjusting level fixed to roof steel members by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long etc complete all as specified and directed.

M & L for 4mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws fixed in ceiling flat or sloping complete all as specified and direced.

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

S&F 5mm thick PVC sheet fillet width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing.

S&F in repairs 15mm bore fancy type bib taps, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as directed

S & F in repair Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm- 125gms) all as specified and directed

S&F in repairs 15mm bore pillar taps fancy type, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete all as specified and directed.

S & F 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and directed

S & F in repairs chromium plated fancy type Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S & F in repairs Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern to squatt pattern closet including all joints and making good to the floor complete all as specified and directed

S & F LDPE pipe 32mm bore fixed to wall/ceiling with bends/elbow complete fixed in repairs complete all as specified and directed

S&F for grating doom 100mm dia of PTMT(Minimum weight 25gms) etc complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC flushing cistern, low or high level, with inlet and outlet pipe, ball valve, syphonic action type, float and handle, pull or push type including brackets etc complete all as specified and directed.

Dismantling of water tanks including disconnecting all connections etc. complete following capacity of tanks .

Exc 250ltrs but not exc 500 ltrs

Exc 500 ltrs but not exc 1000 ltrs

S&F new rotational moulded polythylene water storage tank (cylindrical/ vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing brass ball valve 25mm bore high pressure with polythene float and fly nut, screwed for iron pipe or brass ferrule complete following capacity of tanks : -

Taking up or down steel tubing and connections 15 mm Bore including cleaning for refixing or removal to store S & F GI tubing 15 mm bore Tubes, 'medium grade',' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as specified & as directed .

Taking up or down steel tubing and connections 20 mm Bore including cleaning for refixing or removal to store S & F GI tubing 20 mm bore Tubes, 'medium grade',' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as specified & as directed .

S&F in repairs Gun-metal, globe or gate valves for 20 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.5 Sqm each complete all as specified and directed

Taking down chowkats or frames with Shutters (without taking off shutters from the frame 1.50 Sqm and n exc 4.00 Sqm each complete all as specified and directed

Taking down Shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed

S&F Plain, solid, straight chowkhats and frames of 2nd class Hard Wood wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

M&L for 1.25mm thick mild steel pressed steel frames of size 105x60mm for doors, one or more rebates including necessary fixing lugs, 06nos 100mm size stainless steel hinges (03 nos for each shutter), lock strike plate etc complete all as directed.

M&L for PCC 1:3:6 type C-0 (12.5mm graded stone aggregate) to filling the hollow portions of steel frame with PCC 1:3:6 type C-0 (12.5mm graded stone aggregate) etc complete all as directed. etc complete all as directed.

S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, confirming to Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail and bottom rail in either side and as gap insert for top rail and bottom rail pannelling of plain colour PVC sheet to be filled in the MS welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together wiht solvent and fixing in the frame at site as per specification and drawing complete all as specified and directed.

S & F 2nd class H.W. glazed & skeleton shutter 35mm thick factory made open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members complete all as specified and directed.

S & F 2nd class HW shutters 35mm thick, plain framed paneled shutter factory made (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 complete all as specified and directed.

S&F 30mm thick flush door shutters solid core construction with block board core and plywood face panels commercial type on both sides etc complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed.

S&F coloured powder coated (50 micron) aluminium sections any type for doors,windows, ventilators frames including joining cleat for fixing etc. complete all as specified and directed.

S&F coloured powder coated (50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F coloured powder coated (50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified.

M&L for 12mm thick prelaminated particle board, exterior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in kitchen cabinets cut to the sizes as directed etc complete all as directed.

S & F 5.50 mm thick sheet glass fixed in window shutters etc complete all as directed.

S & F in repairs Galvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples including takingout old wire mesh from steel window and fixing old steel flats and nut complete all as specified.and directed.

Hacking out old broken glass from metal frame including punching or drilling out old glazing pins complete all as specified and directed

M & L for 4.00mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for 18/19mm thick prelaminated particle board, exterior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in kitchen cabinets shutters and shelves cut to the sizes as directed etc complete all as directed.

S & F 100 mm long Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-12 complete all as specified and directed

S & F 75 mm long Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-12 complete all as specified and directed

S & F mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and as directed

S&F 150 mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and directed

S&F 150 mm size aluminium anodized handle complete all as specified and directed

All as per sl. Item No 68 above but 100 mm size complete all as specified and directed

S & F 140mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floorr complete all as specified and directed.

M&L for 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed

M&L for 300 mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed

M & L for preparation of new wood surfaces of any description over 10cm in girth or width & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M&L for painting with two coats of synthetic enamel paint to steel surfaces of any description over 10cm width or girth on untreated steel surfaces over a coat of red oxide primer after preparation of surfaces complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and fixed in any position etc complete all as directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including elding, grinding, buffing, olishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arangement.

S&F Framed work in ornamental and intricate design such as, in grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 with cutting top drilling holes including hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc necessary welding complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position from unframed work as in roof members complete all as specified and directed

Dismantling of Battens for tiles spaced exc 15cm, shingles etc, of any size including tilting fillets

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed.

Fixing only battens hard wood 2nd class of sec area exc 15 and n.exc 25 sq.cm for manglore tiles, shingles etc, of any size including tilting fillets spaced exceeding 15cm centres etc complete all as directed.

M&L for 6mm thick asbestos cement corrugated or semicorrugated sheets as in roof, wall coverings fixed with J/L type bolts or cranked hook bolts etc complete all as specified and directed.

All as sl. Item no. 82 above but except sheets.

S&F Asbestos cement onepiece plain angular ridge 6mm thick Fixed with L-type or Jtype or cranked hook bolts complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering including ridges /cladding to wall,fixed with self tapping screws as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering including ridges /cladding to wall,fixed with self tapping screws as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as directed.

Dismantling of single layer Mangalore pattern or similar tiles in roofing incl ridge/hip tiles etc complete all as directed.

M & L for Mangalore pattern ridge / HIP tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cm 1:6 complete all as complete all as specified and directed.

All as per sl. Item no. 89 above but except tiles.

M & L for roof tile Mangalore pattern inter locking at side joints,laid dry complete all as specified and directed.

All as per Sl. Item no. 91 above but except tiles.

S & F 0.56mm thick plain aluminium sheeting alloy in ridges, hips valleys as in covering to doors etc all as specified and directed

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc complete all as directed.

S&F in repairs glazed earthen ware viterous china wash basin white coloured (flat back or angle back type), size 550x400 mm and including CI brackets and outlet of 32mm bore waste fittings, brass chromium plated bottle traps 32mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, etc complete all specified and directed. etc complete all as directed.

S&F in repairs viterous china wash down water closet (pedestal pattern) white coloured with and including plastic water closed seat, white, closed pattern with recessed bottom, and cover and mild steel chromium plated hinging device etc complete all as directed.

S & F in repairs vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding etc complete all as specified and directed.

S&F in repairs Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including fixing Brass chromium plated bottle traps 32mm bore for urinal with inlet and outlet screwed for pipe or connections including necessary packing, union fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. etc complete all as specified and directed.

S&F in repairs vitreous china Urinal partitions white of size 310 x 700mm slabs terminating about 40cm above floor line etc complete all as specified and directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed

Dismantling of Cast iron or reinforced concrete drain pipes 100 mm bore all as specified and directed.

S&F 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor complete all as specified and directed

All as per item no. 104 above but except pipe complete all as specified and directed

S&F 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor. complete all as specified and directed

All as per sl. Item No. 106 above but except pipe complete all as specified and directed

S&F PVC (SWR) bend any radius 110mm complete all as specified and directed

S&F PVC (SWR) bend any radius 75mm complete all as specified and directed

S & F in repairs ball brass valves 20mm bore high pressure with polythene float and fly nuts complete, screwed for iron pipe and fixed all as specified and directed

Taking down carefully existing unserviceable bitumen felt(any number of layers) including plaster of any thickness,wire brushing and cleaning of the surface of roof terraces including flashing and junctions of parapets kerb wall,PCC fillets,benching etc and removing of the rubbish to a distance not exceeding 500 M from the building and depositing where complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed.

M &L for providing 25 mm thick plain cement concrete 1:2:4 type B-1 (using 12.5 mm graded stone aggregate) for filleting, benching,coving of chajjah top/junctions,padding concrete below roof treatment etc slightly rounded or chamfered on edges wherever required including necessary form work / moulds etc complete all as specified and as directed .

M&L for rendering 10mm thick CM (1:4) on roof slab top, mixed with water proofing compound finished even and smooth without using extra cement complete all as specified. Note: Water Proofing compound shall be measured and paid separately.

M & L for cleaning the newly plastered surfaces of concrete ( roof etc) with wire brushes and applying water proofing treatment as under :- i) Apply Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 ii) Providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.0 Kg / Sqm reinforced with non woven polyester mat weighing not less than 150 gm/Sqm all as specified procured from any one of the approved manufacturer's instructions iii) Apply two coat of solar reflective bituminous aluminium paint @ 0.15 Kg/Sqm over membrane over roof surfaces complete all as per manufacturer's instructions and as directed .

Supply only water proofing compund as specified and directed.

Demolition of brick work / stone boulders masonry built in cement mortar incl all Quoins , archeas, pillars etc bu exc cluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for Brickwork with fly ash Old size bricks, straight or curved on plan exc 6m mean radius, built in in CM 1:6 etc complete all as directed.

Ditto all as item no. 118 above but except bricks

Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for 10mm thick rendering internally in CM 1:6 on fair faces of brickwork or concrete surfaces finished finished even and smooth (without using extra lime or cement) etc complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on brick/concrete external surfaces of walls finish etc complete all as directed.

M&L for 5mm thick ceiling plaster on concrete surfaces in CM 1:3 finished even and smooth with a thin layer of sagol.

M&L for preparation of new plastered surfaces in ceiling and applying two coats of white wash etc complete all as directed.

M&L for Preparation of old decorated or unplastered surfaces brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on walls complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying one coat of alkali resistant primer over a coat of 3 mm thick birla white cement putty,sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc complete all as directed.

M&L for applying two coats of weather emulsion (APEX or Equivalent, white/red colour or as specified and directed by Engr-in-charge) " over one coat of primer over 2mm thick Wall Putty for levelling and smoothening,, including preparation of new decorated plastered surfaces of walls/ceiling complete all as specified and directed.

Note: Amount of sch of credit of Rs.1,15,326.90/-will be deducted from total amount of BOQ.

M/S SAMEER SUBHASH PATANI

M/S VISHAKHA CONSTRUCTION