ECHP-I- Reinsulation of 6.6KV, 240KW, Kirloskar make HT motor Sl.No.3900502-05 and reconditioning the rotor shaft Dynamic balancing at Conveyor-43

Charges for transporting the motor from TTPS site to work Spot, Disconnecting and removing all the 60 Nos. existing stator coils from the slots , Cleaning the slots, removal of the overall insulation and cleaning of all the coils. Reinsulating all the 60 Nos. coils with class- F insulation with epoxy glass mica technique by providing new slot bottom liners, top liners, inter phase separator , wedges etc., Providing glass textolite spacers and braiding the overhang with glass braiding , taking end connection with new fiber glass insulated wire with silver brazing technique with same size of existing lead and termination. Insulate with class 'F' insulating material spray with a coat of moisture proof Dr.Beck red/Gray. Conducting the all relevant test in the stator with winding, replacing of bearing if necessary ( bearing will be supplied by board at free of cost ) one coat of high quality paint should be painted on the motor, transporting the motor back to the TTPS site, including material charges etc., a) Samicatherm tape for slot portion (90 Nos) b) Mica tape rolls for overhang portion (90 Nos) c) Conducting and stress granding varnish lump (LS) d) Epoxy taper texolite wedges for slot potions (6 kg) e) Epoxy texolite lines for bottom ,center and top (12 kg) f) Silver Brazing rods L &T Eutec (1.8 kg) g) Epoxy and finishing varnishing (6 kg).

Charges for reconditioning of the rotor shaft of 6.6 KV, HT 240kW motor including transporting the rotor to work shop, under cutting the damaged portion of the bearing seating area of DE side of shaft, metalizing, providing sleeves to suit the bearings including dynamic balancing , post ultrasonic test assembling and transporting etc.,

APOLLO TRANSFORMERS AND FILTERS (BID ID -1553507)