REPAIR REPLACEMENT MAINT REROUTING OF WATER PIPELINE WITH CONNECTED ITEMS AT SP MARG DK II IN THE AREA OF AGE U WS No III UNDER GE U WATER SUPPLY DELHI CANTT 10

Amount

Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth for pipe line, etc in soft/loose soil, getting out and levelling of bottom surface to required level all as specified and as directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.

Removing excavated material to a distance not exc 50 m and depositing where directed not exc 1.5 meters above the starting point complete all as specified and as directed.

Boring Holes under road/Path by Bocky manually in any type of soil upto 150 mm bore Complete all as specified and as directed By Engg-in-Charge.

Boring Holes under road/Path by Bocky manually in any type of soil, 200 mm bore to 300 mm bore Complete all as specified and as directed By Engg-in-Charge.

Taking up or down CI/DI Pipe of following sizes including all fittings) with spigot and socketed ends and lead tyton joints including burning out lad joints and recovering lead complete all as specified and as directed. Note:- Excavation & earth work shall be measured & paid separetely.

(i) 100 mm Bore

(ii) 150 mm Bore

(iii) 200 mm Bore

(iv) 250 mm Bore

(v) 300 mm Bore

Refixing/ relaying, jointing and testing old Cast Iron water mains with spigot & socket ends of lead joints retrieved under srl No 11 here-in-before in new or old position after cleaning from outside with suitable chemical & rodding complete all as specified and as directed of following sizes. Notes:- (i) Excavation & earth work for new locations shall be measured & paid separetely. (ii) Lead joints shall be measured and paid seperately. (iii) Fittings if any shall be measured & paid separetely

(i) 100 mm Bore

(ii) 150 mm Bore

(iii) 200 mm Bore

Supplying, Laying, jointing, testing and commmisioning DI Pipe of following sizes as per IS 8329-2000, class K-7 with inside cement mortar lining with spigot and socket ends laid in trenches complete all as specified and as directed . Note:- (i) Joints shall be measured & paid separetely. (ii) fittings if any, shall be measured and paid separately

(i) 100 mm Bore

(ii) 150 mm Bore

(iii) 200 mm Bore

(iv) 250 mm Bore

(v) 300 mm Bore

Material & Labour for Rubber Gasket joint(Tyton) including jointing material for CI/DI Pipe of following sizes complete all as specified and as directed .

(i) 100 mm Bore

(ii) 150 mm Bore

(iii) 200 mm Bore

(iv) 250 mm Bore

(v) 300 mm Bore

Material & Labour for run lead joint including jointing material for CI/DI Pipe of following size/Bore complete all as specified and as directed .

(i) 100 mm Bore

(ii) 150 mm Bore

(iii) 200 mm Bore

(iv) 250 mm Bore

(v) 300 mm Bore

Labour Only for run lead joint using old lead and new sopurn yarn of following size/Bore complete all as specified and as directed .

(i) 100 mm Bore

(ii) 150 mm Bore

(iii) 200 mm Bore

(iv) 250 mm Bore

(v) 300 mm Bore

M&L for flange joint for following size of Pipe with rubber or fibre gasket including Nut, Bolts and washers etc complete all as specified and as directed.

(i) 100 mm Bore

(ii) 150 mm Bore

(iii) 200 mm Bore

(iv) 250 mm Bore

(v) 300 mm Bore

Taking up or down GI steel tubing of following sizes with connections from Trenches/floors/walls including cleaning for refixing or removal complete all as specified and as directed. Note :- Excavation & earth work shall be measured & paid separetely.

(i) 25 mm Bore

(ii) 40 mm Bore

(iii) 50 mm Bore

Refixing old steel tubing and connections in new or old position in Trenches/ wall/ ceiling/ floor of following sizes complete all as specified and as directed. Note :- Excavation for new location shall be measured & paid separetely.

(i) 25 mm Bore

(ii) 40 mm Bore

(iii) 50 mm Bore

Laying and Testing of GI steel tubing medium grade of following size in old or new position as in ceiling/walls with necessary fixing arrangements and including providing new GI fittings complete all as specified and as directed. Note :- (i) GI Pipe shall be issued under Sch 'B' free for laying.

(i) 25 mm Bore

(ii) 40 mm Bore

(iii) 50 mm Bore

Laying and Testing of GI steel tubing medium grade of following size in old or new position as in Trenches with necessary fixing arrangements and including providing new GI fittings complete all as specified and as directed. Note :- (i) Excavation & earth work for new locations shall be measured & paid separetely. (ii) GI Pipe shall be issued under Sch 'B' free for laying.

(i) 25 mm Bore

(ii) 40 mm Bore

(iii) 50 mm Bore

Supply and fixing Gun metal gate valve of following sizes with iron wheel head screwed both ends for ron pipe as per IS-778 complete all as specified and as directed.

(i) 40 mm Bore

(i) 50 mm Bore

Supplying, fixing, jointing & testing cast Iron Sluice Valve of following sizes, ISI Marked, flanged ends drilled pressure rating PN-1.6, PD Short body confirming to IS 14846 -2000, having stainless steel spindle with cast iron operation wheel at top complete with Nuts, Bolts, washers and rubber gaskets of following sizes including taking out of unserviceable sluice valve complete all as specified and as directed.

(i) 100 mm Bore

(ii) 150 mm Bore

(iii) 200 mm Bore

(iii) 300 mm Bore

Supply, fixing, jointing and testing of Cast iron Non Return valve of following sizes, without by pass arrangement , Swing type, confirming to IS 5312, flanged ends, pressure rating PN 1.0 complete including taking out unserviceable NRV complete all as specified and as directed at site by the Engineer-in-Charge. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item.

(i) 100 mm Bore

(ii) 150 mm Bore

(iii) 300 mm Bore

M&L for laying and jointing DI Fittings/specials, as per IS: 9523: 2000 such as Tees, bends (any type, radius and angle) tapers any type, collars,tail pieces,caps and plugs Upto 150 mm bore, complete all as specified and as directed.

M&L for laying and jointing DI Fittings/specials, as per IS: 9523: 2000 such as Tees, bends (any type, radius and angle) tapers any type, collars,tail pieces,caps and plugs 200 mm to 300 mm bore, complete all as specified and as directed.

M&L for laying and jointing CI Fittings/specials such as Tees, bends (any type, radius and angle) tapers any type, collars,tail pieces,caps and plugs upto 150 mm bore conforming to IS: 1538-1993 complete all as specified and as directed.

M&L for laying and jointing CI Fittings/specials such as Tees, bends (any type, radius and angle) tapers any type, collars,tail pieces,caps and plugs 200 mm to 300 mm bore conforming to IS: 1538-1993 complete all as specified and as directed.

Supply and Installation of water meter, of sizes as under, suitable for cold water and potable water supplies, including taking out unserviceable one, complete all as specified and as directed at site by the Engineer-in-Charge. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item.

(i) 100 mm Bore

(ii) 150 mm Bore

(iii) 200 mm Bore

(iv) 300 mm Bore

Supply and installation of flanged ends Cast Iron strainer, PN 1.0, of following sizes, including testing , replacing of flanges by new with welding works and making good connection with flanged ends, with rubber gasket sheet and Nut and bolts etc ISI marked fixing in horizontal/ incliined/ vertical position, complete all as specified and as directed at site by the Engineer-in-Charge.

(i) 100 mm Bore

(ii) 150 mm Bore

(iii) 200 mm Bore

(iv) 300 mm Bore

Supply,Laying & jointing of MS Pipe heavy duty class "C" of following sizes as per IS:1239 Laid in Trenches or in floors for connection centrifugal pump sets for suction pump to header and to connect outgoing water mains CI/DI lines including taking down the unserviceable pipe complete all as specified and as directed.

(i) 100 mm Bore

(ii) 150 mm Bore

(iii) 200 mm Bore

Supplying, fixing in replacement MS flange 16 mm thick duly welded including Nut, Bolts and washers on ends with MS pipe of following sizes complete all as specified and as directed.

(i) 100 mm Bore

(ii) 150 mm Bore

(iii) 200 mm Bore

Construction of valves pit chamber having internal dimension 120 cm X 120cm x 120cm with PCC (1:4:8) using 40mm graded mechanical crushed stone aggregate for foundation, 15 cms thick. brick wall 23 cm thick built in CM (1:4), 10mm thick rendering in cement mortor 1 : 6 all around the brick work, PCC (1:2:4) type B1 using 20mm graded stone aggergate as in coping for grouting MS frame including 08 mm thick MS top sheet cover with locking arragnement including 50 mm pad lock with double key angle iron including painting steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer with, including necessary excavation and earth work in any type soil, returning filling and removal of surplus soil to a distance not exceeding 50 mtr complete all as specified and as directed.

Supplying, Laying & jointing of MS Pipe header of size 350 mm dia and 6.00 mtr long on pillar or in horizontal/ vertical/ inclined position or laying on floors having branch connection of size 200 mm dia- 02 Nos, 100 mm dia- 03 Nos, 300 mm bore- 01 Nos with 300 mm long pipe piece and duly welded flange of each size complete all as specified.

An amount of Rs 332408.50 shall be deducted from BOQ on account of schedule of credit

Ridhi engineers and builders

Rahul Enterprises

Deven Associates

S S CONSTRUCTION

Microsys Controls India

somyaenterprises