CONTRACT FOR CONSTRUCTION OF NEW RCC FOUNDATION AND ALLIED CIVIL WORKS FOR ERECTION OF SERVICE WATER TANK AND PUMPS INSIDE THAL-AMMONIA EXTENSION PLANT AT RCF THAL

EARTHWORK IN EXCAVATION BY MANUAL MEANS IN FOUNDATIONS OF EQUIPMENTS, TANKS, FOOTINGS, COLUMNS, PLINTH BEAMS, WALLS FOUNDATIONS ISOLATED PITS, PAVEMENTS, TRENCHES FOR PIPELINES / CABLES, DRAINS ETC., TO THE REQUIRED LEVELS AND GRADES IN BOTH DRY AND WET CONDITIONS, RAMMING OF BOTTOMS, GETTING OUT INCLUDING DRESSING OF SIDES AND EXCAVATED EARTH WITH LIFT UP TO 1.5 M INCLUDING STACKING, LEVELING AND DRESSING ETC., COMPLETE AS PER DIRECTION OF ENGINEER-IN-CHARGE IN ALL TYPES OF SOILS, SUCH AS EARTH, MARINE CLAY, MARSHY LAND, RUNNING SAND, GARBAGE, SLUSH ETC. INCLUDING PROVIDING TEMPORARY SUPPORTS TO ALL SERVICE LINES SUCH AS OVERHEAD AND UNDERGROUND WATER SEWAGE AND DRAIN PIPES, CABLES ETC AND SHORING AND STRUTTING WHEREVER NECESSARY, COMPLETE IN ALL RESPECTS AS PER DIRECTION OF ENGINEER- IN - CHARGE. THE RATE INCLUDES PUMPING OUT WATER, BACKFILLING, REMOVING THE VEGETATION AND REFILLING / DISPOSAL OF EXCAVATED MATERIALS WITH IN A LEAD OF 03KM AS DIRECTED INCLUDING LEVELING, RAMMING ETC COMPLETE AS DIRECTED.

PROVIDING & LAYING 15-23 CM THICK DRY STONE RUBBLE SOLING HARD STONE SET IN REGULAR LINES, HANDPACKED AND INTERSTICES THOROUGHLY FILLED WITH SMALL CHIPS INCLUDING FILLING IN WITH GOOD QUALITY MURUM BROUGHT FROM RCF PREMISES, COMPACTING WITH IRON RAMMERS, WATERING, METAL-1 WITH GRIT SPREADING 12MM THK. LAYER ON TOP ETC COMPLETE AS DIRECTED BY ENGINEER IN CHARGE.COMPLETE AS DIRECTED.

PROVIDING AND LAYING CAST IN SITU/READY MIX CEMENT CONCRETE IN M15 OF TRAP/ GRANITE/QUARTZITE/GNEISS METAL FOR FOUNDATION AND BEDDING / STEPS INCLUDING STEEL CENTERING, FORMWORK, LAYING/PUMPING, COMPACTING, ROUGHENING THEM IF SPECIAL FINISH IS TO BE PROVIDED, FINISHING UNEVEN AND HONEYCOMBED SURFACE AND CURING ETC. COMPLETE. THE CEMENT MORTAR 1:3 PLASTER IS CONSIDERED FOR RENDERING UNEVEN AND HONEYCOMBED SURFACE, ONLY. NEWLY LAID CONCRETE SHALL BE COVERED BY GUNNY BAG, PLASTIC, TARPAULIN ETC.

PROVIDING AND LAYING CAST IN SITU/READY MIX CEMENT CONCRETE M-30 OF TRAP / GRANITE/QUARTZITE/ GNEISS METAL FOR R.C.C. WORK IN FOUNDATIONS LIKE RAFT, STRIP FOUNDATIONS, GRILLAGE AND FOOTINGS OF R.C.C. COLUMNS AND STEEL STANCHIONS ETC. INCLUDING BAILING OUT WATER, STEEL CENTERING, FORMWORK ,COVER BLOCKS, LAYING/PUMPING, COMPACTION AND CURING ROUGHENING THE SURFACE IF SPECIAL FINISH IS TO BE PROVIDED APPLICATION OF ONE COAT OF BLACKBITUMENT PAINT TO CONCRETE SURFACE (EXCLUDING REINFORCEMENT AND STRUCTURAL STEEL)

PROVIDING AND LAYING CAST IN SITU/READY MIX CEMENT CONCRETE IN M-30 OF TRAP/ GRANITE/ QUARTZITE/ GNEISS METAL FOR R.C.C. COLUMN / PARDI OF REQUIRED THICKNESS INCLUDING STEEL CENTERING, FORMWORK, COVER BLOCKS, LAYING/PUMPING, COMPACTING AND ROUGHENING THEM IF SPECIAL FINISH IS TO BE PROVIDED AND CURING INCLUDING APPLICATION OF ONE COAT OF BLACKBITUMENT PAINT TO CONCRETE SURFACE ETC. COMPLETE.. (EXCLUDING REINFORCEMENT AND STRUCTURAL STEEL).

PROVIDING AND FIXING IN POSITION TMT - FE - 500 BAR REINFORCEMENT TATA/SAIL/JSW OR EQUIVALENT MAKE OF VARIOUS DIAMETERS FOR R.C.C. PILE CAPS, FOOTINGS, FOUNDATIONS, SLABS, BEAMS COLUMNS, CANOPIES, STAIRCASE, NEWELS, CHAJJAS, LINTELS PARDIS, COPINGS, FINS, ARCHES ETC. AS PER DETAILED DESIGNS, DRAWINGS AND SCHEDULES. INCLUDING CUTTING, BENDING, HOOKING THE BARS, BINDING WITH WIRES OR TACK WELDING AND SUPPORTING AS REQUIRED COMPLETE. (SAIL, TATA, JSW JINDAL OR EQUAVALENT BRANDS ONLY).

SUPPLYING AND FILLING IN FOUNDATION, TRENCHES, PLINTH, UNDER PAVEMENT FLOORS AND SIDES OF FOUNDATION WITH COARSE SAND OF APPROVED QUALITY AT ALL DEPTHS IN LAYERS NOT EXCEEDING 15CMS IN THICKNESS INCLUDING CONSOLIDATION AND DRESSING LAYER BY RAMMING AND WATERING ETC AS DIRECTED BY EIC ETC. COMPLETE.

PROVIDING SECOND CLASS BURNT BRICK MASONRY WITH CONVENTIONAL/ I.S. TYPE BRICKS IN CEMENT MORTAR 1:6 IN FOUNDATIONS AND PLINTH OF INNER WALLS/ IN PLINTH EXTERNAL WALLS INCLUDING BAILING OUT WATER MANUALLY , STRIKING JOINTS ON UNEXPOSED FACES, RAKING OUT JOINTS ON EXPOSED FACES AND WATERING ETC. COMPLETE.

PROVIDING INTERNAL CEMENT PLASTER 12 MM THICK IN A SINGLE COAT USING READY TO USE WALL PLASTER TO CONCRETE OR BRICK SURFACE IN ALL POSITIONS INCLUDING SCAFFOLDING AND CURING COMPLETE. PROVIDING GROOVE AT JOINT OF B.B. MASONRY AND CONCRETE MEMBERS COMPLETE. A) CEMENT RATIO 1:5 (1 CEMENT : 5 GRADED PACKED GRADED SAND)

PROVIDING AND APPLYING TWO COATS OF EXTERIOR ACRYLIC EMULSION PAINT CONFIRMING TO CORRESPONDING I.S. OF APPROVED MANUFACTURE AND OF APPROVED COLOUR TO THE PLASTERED SURFACES INCLUDING CLEANING ,PREPARING THE PLASTER SURFACE, APPLYING PRIMER COAT ,SCAFFOLDING IF NECESSARY , AND WATERING THE SURFACE FOR TWO DAYS ETC COMPLETE.

PROVIDING AND LAYING GP-2 (FOSROC) OR ANY OTHER APPROVED EQUIVALENT ANTI SHRINKAGE GROUTING IN POCKETS/SLEEVES, UNDER BASE PLATES OF STRUCTURAL COLUMN AS SPECIFIED IN THE DRAWING, DYNAMIC MACHINES SUCH AS SMALL PUMPS AND COMPRESSORS AS PER MANUFACTURER'S SPECIFICATIONS, COMPLETE IN ALL RESPECTS ETC AND AS PER THE DIRECTION OF SITE-IN-CHARGE. (THE PRODUCT LIKE ULTRATECH/RENDROC (RGL) OF FOSROC OR ITS EQUIVALENT)

PROVIDING & MAKING ARRANGEMENTS FOR POCKETS IN R.C.C. WHILE CASTING TO RECEIVE / INSTALL FOUNDATION BOLTS OF REQUIRED DIAMENSIONS AND DEPTH AS PER THE DRAWING ETC. COMPLETE AND AS PER THE DIRECTION OF SITE-IN-CHARGE.

SUPPLYING, FABRICATING AND FIXING IN POSITION M.S. HOLDING DOWN BOLTS ASSEMBLY CONSISTING OF BOLTS, HEADS NUTS, WASHERS ETC., AND THE LIKE INCLUDING EMBEDDING IN CEMENT CONCRETE / R.C.C WORKS AS PER APPROVED DRAWINGS COMPLETE IN ALL RESPECTS INCLUDING ONE COAT OF PRIMER. (ALL MATERIALS SUPPLY ARE IN CONTRACTOR'S SCOPE).

DISMANTLING BRICK MASONRY IN LIME OR CEMENT MORTAR AND STACKING THE MATERILS AS DIRECTED WITH ALL LEADS, LIFTS ETC.

DISMANTLING STONE MASONRY IN LIME OR CEMENT MORTAR INCLUDING STACKING THE MATERILS AS DIRECTED WITH ALL LEADS, LIFTS ETC.

REMOVING LIME OR LEAN CEMENT CONCRETE INCLUDING STACKING THE SPOILS AS DIRECTED WITH ALL LEADS, LIFTS ETC, COMPLETE.

DISMANTLING THE R.C.C. WORK 1:2:4 AND SORTING OUT THE MATERIALS SUCH AS STEEL ETC. AS DIRECTED AND STACKING THEM WITHIN THE SPECIFIED LEAD AS DIRECTED ETC. COMPLETE.

PROVIDING FIXING VARIOUS TYPES OF MATERIALS & OTHER FITINGS / ACCESSORIES, ETC. INCLUDING THE CHARGES SUCH AS TRANSPORTATION, HANDLING, STORAGE AND OVERHEADS, PROFITS, ETC. COMPLETE. AS DIRECTED BY ENGINEER-IN-CHARGE AS PER REQUIREMENT OF JOB NOT INCLUDED IN ABOVE ITEMS. PAYMENT SHALL BE MADE ON THE BASIS OF ACTUAL COST OF MATERIAL PER CASH MEMO/RECEIPTS.

DESIGN OF R.C.C. FOUNDATIONS AND ALLIED WORK FOR ERECTION OF SERVICE WATER TANK AND PUMPS AND IN CONUSLTATION WITH RCF AS PER MODIFICATIONS SUGGESTED, EXISTING SITE/SOIL CONDITIONS ALONG WITH PREPARATION OF PROPOSED DRAWINGS, SUBMISSION OF DETAILED DESIGN AND RCC/FABRICATION DRAWINGS AND ISSUE OF STABILITY CERTFICATE AFTER COMPLETION OF WORK.

Please Enable Macros to View BoQ information