Supply and Fixing of Open gym at Municipality area Park, Nathdwara.(1)

Amount

DIMENSIONS: - 1080mm (Length) x 860mm (Width) x 1400mm.(Height).• Safe Area:-1.39 x 1.27Mtr. • Surf Board Equipment made from “C” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The center pipe is of 100mm NB pipe. • The sleeve pipe is of 125mm OD seamless pipe with thickness of 3mm and bolted to main frame with M10 SS bolts.• The bottom support welded of M.S. plate of Ø 250 mm & 10mm thickness.• The handle frame is of 25mm NB & 32mm NB pipe. • The paddle frame is of 32NB pipe is supported with 70X8mm bend M.S. flat and can be replaceable. • The foundation used for fixing is a structure and made from center pipe of 80NB welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 2 mm thickness and 20mm x 40mm MS square pipes of 2mm thickness. • Bushes are used 70mm Outer Diameter with 5mm thickness is used. • The footrests made from Aluminum casting material of size 320mm X 270 mm X 5mm. • For support to footrest 200mmX250mm with 2.8 mm thickness M.S. Plate used.• Closing Caps are made up of high quality HDPE/LLDPE material in attractive colors.• The pins used are made up of Ø35 mm bright material.• The bearing used are of “6007” permanent lubricated sealed bearing of reputed brand.• High tensile steel with galvanized nut bolts are used for assembly.• The cerclips used for assembly is of A34. • Rubber handle grips are provided in different attractive colors. • The powder coating is done with Pure Polyester powder of Ackzonoble or Berger with 60 to 70 micron thickness.

SITC open gym equipment of following DIMENSIONS: - 1650mm (Length) x 700mm (Width) x 1650mm.(Height)• SAFE AREA: - 2.7Mtr x 1.6Mtr. • Sky Walker Equipment made from “C” class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters• The main frame pipe is of 80mm NB pipe which is bend at the radius of 250mm.• The leg movement frame is of 48 x 48mm x 2.8mm thick M.S. square pipe.• Sleeves are made up of 98 mm OD M.S. pipe with thickness 3mm. This results in easy replacement of bearings, pins and handle. • The handle frame is of 25mm NB pipe. • The foundation used for fixing is a structure and made from center pipe of 80 NB pipe welded with M.S. round plate of Ø248 mm & 9mm thick. Main pipe supported with 23 mm X 23mm M.S. angles of 1.8mm thickness and 19mm x 39mm M.S. square pipes of 1.8mm thickness. Two foundations are provided for rigid support.• The footrests made from HDPE/LLDPE material of size 130 X 310 X 5mm in attractive colors. • Closing Caps are made up of high quality HDPE/LLDPE material in attractive colors.• The pins used are made up of Ø 25mm bright material. Pins are fixed at the outer end with M8 grub screws and Dia.7.8mm ball.• The bearings used are “6205” are permanent lubricated sealed bearing of reputed brand.• High tensile steel with galvanized nuts & bolts are used for assembly. • Handle grips are provided & it is made up of high quality rubber material.• The powder coating is done with Pure Polyester powder of Ackzonoble or Berger with 60 to 70 micron thickness.Complete in all respect including discryption board of the equipment.

DIMENSIONS: - 1750mm (Length) x 650mm (Width) x 2150mm. (Height).• SAFE AREA: - 3.0Mtr x 1.7Mtr.• Chest press cum seated puller equipment made up of “C” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters• The center pipe is of 100NB pipe.• The bottom welded with support of M.S. round plate of Ø248 mm & 9mm thickness.• The connecting pipes are made up from 25NB pipe.• The handle frame is made up from 32NB pipe.•To build structure bushes are used which are made from seamless pipe of 50mm O.D. and 6mm thickness as well as 50mm diameter solid bar is used.• The foundation used for fixing is a structure and made from center pipe of 80 NB welded with M.S. round plate of Ø248 mm & 9mm thick. Main pipe supported with 23 mm X 23mm M.S. angles of 1.8 mm thickness and 20mm x 40mm M.S. square pipes of 1.8mm thickness.• The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mmX1.8mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.• Closing Caps are made up of high quality HDPE/LLDPE material in attractive colors.• Base Cover is made up of high quality HDPE/LLDPE material in attractive colors.• Pins used of Diameter 25mm and 17mm are made up from bright material.• The bearings used are of “6205” & “6203” permanent lubricated sealed bearing of reputed brand.• High tensile steel with galvanized nuts & bolts are used for assembly.• The cerclips used for locking is made up of A24 & A16.• Handle grips are provided which are made of high quality rubber material.• The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness.

SITC open gym equipment of following DIMENSIONS: - 1400mm (Length) x 540mm (Width) x 1200mm. (Height). • SAFE AREA: - 3 Mtr x 1Mtr. • Seating & Standing Twister equipment made from “C” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The Center Pipe is of 100mm NB pipe. • The M.S. round plate of Ø250 mm & 10mm thickness is welded at bottom. • Handle sleeve pipe of 125mm OD with thickness 3mm provided for easy assembly, replacement and maintenance. • The bottom frame of the Seating & Standing twister is of 32 NB, 50 NB, and 25 NB pipe. The bottom frame is provided with MS Flat of 38X9mm for easy assembly, replacement and maintenance. • The handle frame of Seating & Standing twister is 25 NB & Foot resting frame of seating side is made of G.I. pipe of 25mm NB. • The foundation used for fixing is a structure and made from center pipe of 80 NB pipe, Welded with M.S. round plate of Ø248 mm & 9mm thick. Main pipe supported with 23 mm X 23mm M.S. angles of 1.8 mm thickness and 19mm x 39mm MS square pipes of 1.8mm thickness. • The Twister plate fitted on the bottom frame is made up of M.S. Round Plate of size 298mm diameter and 9mm thickness. • Closing Caps are made up of high quality HDPE/LLDPE material in attractive colors. • The Pins used are made up of Ø 35 mm bright material. • The bearings used are of “6205” permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nuts & bolts are used for assembly. • The powder coating is done by Pure Polyester powder of Berger Paint with 60 to 70 micron thickness.

SITC SIT UP BOARD DOUBLE open gym equipment of following PRODUCT DIMENSIONS: - 1950mm (Length) x 1350mm (Width) x 700mm (Height).• SAFE WORKOUT AREA: - 2500mm (Length) x 1600mm (Width).• The Sit up Board double made from “C” Class GI pipe. Center column made from 100mm NB “C” class G.I. Pipe.• Sleeve provided of M.S. seamless pipe of Outer diameter 123mm with thickness 3mm provided. • The main frame is of 50mm NB pipe. FRP sheet of 3mm thickness is molded on main frame. • The remaining frame of the sit up board is of 32mm NB pipe.• Closing Caps are made up of high quality HDPE/LLDPE material in attractive colors.• Fiber reinforced Plastic sheet of 3mm thickness is Bounded on 25mm NB pipe of main frame. • The foundation used for fixing is a structure and made from center pipe of 80 NB pipe welded with M.S. round plate of Ø249 mm & 9mm thick. Main pipe supported with 23 mm X 23mm M.S. angles of 1.8 mm thickness and 19mm x 39mm M.S. square pipes of 1.8 mm thickness.• The powder coating is done with Pure Polyester powder Ackzonoble or Berger Paints with 60 to 70 micron thickness.Complete in all respect including discryption board of the equipment.

• DIMENSIONS: - 1840mm (Length) x 360mm (Width) x 1560mm. (Height).• SAFE AREA:- 2.8 x 1.4Mtr. • Leg Press equipment made from “C” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters• The center pipe is of 100mm NB made from “C” Class G.I. pipe.• The Sleeve frame is of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve can be disassembled from main frame.• The bottom support of M.S. round plate of Ø250 mm & 10mm thick.• The remaining outer frame is of 32NB made from “C” class G.I. pipe.• The foundation used for fixing is structure and made from center pipe of G.I. of 80mm NB “C” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angle of 3 mm thickness and 20mm x 40mm CRC square pipe of 3mm thickness.• Seat & Back rest provided are made up of MS deep draw quantity of 2mm thickness with no joint with uniform outer edge radius 20mm.• The footrests are made from casted Aluminum material, having sizes 130mm X 310mm X 5mm thick. With the support of 310mm X 130mm X 3mm thick MS plate.• The frame of footrests made up of 25 NB “C” class G.I. pipe.• Closing Caps are made up of high quality Fiber reinforced Plastic material.• To build structure bushes are used which are made from M.S. seamless pipe of 50mm O.D. and 5mm thickness.• The pins used are made up of Ø25 mm SAE 8620 bright material.• The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed Brand. • High tensile steel with galvanized nut bolts are used for assembly.• The cerclips used for assembly are of A24 mm.• The powder coating done with Pure Polyester powder of Ackzonoble or Berger with 60 to 70 micron thickness.Complete in all respect including discryption board of the equipment.

Khalsa Exports Pvt. Ltd.

GKM CONSTRUCITON COMPANY

JAROLI ENTERPRISES