REPAIR/REPLACEMENT OF ELECTRICAL WIRING AND FITTINGS/FIXTURE AND ALLIED WORKS AT STN SUNDER GE(AF) CHABUA

Amount

Taking down carefully aluminium point wiring (light, fans, socket etc) complete incl battens and fittings such as switch, ceiling rose, light fittings, regulators, socket etc and making good disturbed surface of wall/floor etc complete all as specified.

Taking down old unserviceable DBs of any type and capacity.

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators etc. for reuse at site or carrying to the store (To be measured only when foud serviceable in all respect complete for reuse).

M/L for point wiring with 1.5 sqmm PVC insulated copper cable 1100 volts grade stranded copper conductor cable drawn through and including PVC cassing and capping complete with all fittings and acessories for modular box/plate/switchs etc and 1.5 sq mm stranded PVC unsheathed copper cable for earth continuity for:- Note : Modular Box, Modular Plate, Modular Switchs, etc will be measured and paid separately.

(a) One light/bell point controlled by one switch

(b) One fan point controlled by one switch

(c) One 5 amps switch socket on indepandent board.

All as per item no 4 here in before but with 2.5 sq mm copper wire for power point.

Supply and fix modular switch 1 way, 6 amps, 1 module.

Supply and fix modular switch 1 way, 16 amps, 1 module.

S/F modular socket, 6 Amps, 2/3 pin combined 2 module.

S/F modular socket, 6/16 Amps, 2/3 pin combined 2 module.

S/F modular fan regulator, 120 watt, 2 module.

S/F modular cover plate with frame, 1 module

S/F modular cover plate with frame, 2 module

S/F modular cover plate with frame, 3 module

S/F modular cover plate with frame, 4 module

S/F modular cover plate with frame, 6 module

S/F modular cover plate with frame, 8 module

S/F modular metal flush box 1/2 module

S/F modular metal flush box 3 module

S/F modular metal flush box 4 module

S/F modular metal flush box 6 module

S/F modular metal flush box 8 module

S&F Modular Bell push 6A 1 module

M/L for point wiring with 1.5 sqmm PVC insulated copper cable 1100 volts grade stranded copper conductor cable drawn through and including PVC cassing and capping complete with all fittings and acessories including MS box of thickness 1.6mm and hylem sheet cover of 3 mm thick for mounting of switches, sockets, regulators, etc and 1.5 sq mm stranded PVC unsheathed copper cable for earth continuity for:-

(a) One light/bell point point controlled by one switch

(b) One fan point controlled by one switch

(c) One 5 amps switch socket combination on indepandent board.

(d) One 5 amps socket outlet on same board controlled by another switch.

All as per item no 23 here in before but with 2.5 sq mm copper wire for power point.

M&L for point wiring complete with PVC insulated unsheathed FRLS multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm three single core drawn through in and including suitable size PVC casing caping ISI Marked complete with one run of PVC insulated copper conductor cable 1.5 Sq mm single core green colour earth wire and connecting to earth dolly incl colour coding of cable shall be for phase, neutral and earth wire as specified in MES SSR Part I 1991 with provn of sunken galvanised not less than 1.12 mm thick MS sheet pressed terminal boxes concealed on wall, with 3 mm thick laminated sheet top cover ISI marked. Make: Hylum/Anchor for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing all as specified and directed.

(a) One light point controlled by two No piano type switch 5 Amps single pole two way

All as per Ser item No 25 above but with 4 sqmm cable for SPN enclosure with a two pin and earth plug and socket with plug top complete with one single pole MCB complete all as specified and directed.

Supply and fix switch piano flush type, 5 Amps 240 volts single pole one way.

S/F switch socket combination 2 in 1, 5 amps flush type.

S/F socket outlet, 5 pin 5amps,flush type.

S/F switch socket combination 5/15 amps, 5 in 1, flush type.

S&F fan regulator electronic type, rotary step, 240 Volt.

S&F ceiling rose surface backelite three terminals, PVC/polycarbonate, insulated body.

S&F Switch piano, flush type single pole, two way 5 Amp

S&F Bell push, flush type, 5 amp complete all as specified and directed

S&F in repair Bell push flush type, 5 Amps complete all as specified and directed

S&F buzzer Ding dong, AC 230 volts single pole

Refixing of buzzer Ding dong, AC 230 volts single pole

S&F in repair buzzer Ding dong, AC 230 volts single pole complete all as specified and directed

S/F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.

Supply and fixing surface and wall mounted LED batten fitting energy efficient, including LED tube with complete fitting of 20 watt , inluding provision of PVC insulated sheathed round flexible wire with multi strand copper conductor of size 1.5 sqmm 3 core 1100Volts grade all as specified and directed of

S&F 9 Watt LED T5 batten fitting including provision of PVC insulated sheathed round flexible with multi strand copper conductor of size 1.5 sqmm 3 core 1100 Volts grade complete all as specified and as directed.

Fixing only serviceable light fittings any type and any description obtained from item no 3, including necessary electric connection with round flexible wire with multi stranded copper conductor of size 0.50 sqmm, 3 core, 1100 volts grade complete all as directed.

Supply and fix ultra modern designed high efficacy 2 x 2 recess 34 W LED luminaire with soft light and glare free symmetrical illumination inluding provision of PVC insulated sheathed round flexible wire with multi strand copper conductor of size 1.5 sqmm 3 core 1100Volts grade all as specified and directed.

Supply and draw submain wiring with two single core 4 sqmm FR PVC insulated copper cable 1100 volts grade multistrand, unseathed conductor drawn into FR PVC casing and caping and all necessary fittings including 4 sqmm multi strand FR PVC insulated copper wire for earth continuty conductor connected to common earth dolly complete after taking down the old unserviceable one all as specified and directed.

Supply and draw submain wiring with two single core 6 sqmm FR PVC insulated copper cable 1100 volts grade multistrand, unseathed conductor drawn into FR PVC casing and caping and all necessary fittings including 6 sqmm multi strand FR PVC insulated copper wire for earth continuty conductor connected to common earth dolly complete after taking down the old unserviceable one all as specified and directed.

Supply & Fix SP&N DBs, 4 way single door with 200A rated busbar complete all as specified and directed.

Supply & Fix SP&N DBs, 8 way single door with 200A rated busbar, complete all as specified and directed.

M&L for MCB single pole, 'C' curve, 10 KA, 6 - 32 amps complete all as specified and directed.

M&L for MCB single pole & neutral 'C' curve, 10 KA, 32 amps complete all as specified and directed.

Refixing MCB, DB of any type and capacity including repair to surrounding surfaces completely all as specified and directed.

M&L for MCB blanking plate all as specified and directed.

S&F single pole and neutral enclosure with a two pin and earth plug with socket complete with one single pole MCB of 20 amps.

Supply and fix of MCCB, 4 Pole, 125 Amps , with breaking capacity 25KA , Thermal magnetic trip Unit, fixed thermal Fixed magnetic (FTFM), Ics=100% Icu, AC 415 volt ,50 HZ complete all as specified and as directed.

Supply and fiixing sheet steel, Phosphated, Powder coated single door Vertical TPN DB with provision of MCCB incommer 4 way complete all as specified and directed.

Supply & Fix in repair LED 2x2 panel light driver of 42 watt/34 Watt/36 watt all as specified and directed.

M/L for Earthing complete with galvanized steel earth plate electrode 60 x60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts nuts, check nut and washers of GI and GI tubing 15 mm bore, light grade for earth lead protection up to main earth test point and includingconcrete pit in PCC (1:3:6) typeC 1 pre cast RCC (1:2:4) type B1 cover slab 450 x 450 x 50 mm with one handle for lifting made out of 8 mm dia MS bar, wire mash, 20 mm bore GI tubing(L. G.) for watering ,charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed Electrical plate no 3 of SSR Part-I.

Supply and fixing in repair surface and wall mounted LED batten fitting, including LED tube with complete fitting of 20 watt, inluding provision of PVC insulated sheathed round flexible wire with multi strand copper conductor of size 1.5 sqmm 3 core 1100Volts grade all as specified and directed of

Supply & Fix LED lamp 9 watt complete all as specified and directed.

Supply & Fix in repair LED lamp 7 watt complete all as specified and directed.

Supply and fix in repairs after taking down the old unserviceable one, electronic ballast suitable for 36/40 watt flourescent tube light fitting/2 x 36 watt CFL fitting all as specified and directed.

Supply and fix in repairs after taking down the old unserviceable one, switch socket combination 5/6 Amp 5 pin flush type complete all as specified and directed.

Supply and fix in repairs after taking down the old unserviceable one, switch socket combination 15/16 Amp 5/6 pin universal type as specified and directed.

Supply and fix in repair of MCCB, 4 Pole, 125 Amps , with breaking capacity 25KA , Thermal magnetic trip Unit, fixed thermal Fixed magnetic (FTFM), Ics=100% Icu, AC 415 volt ,50 HZ at existing V TPN DB complete all as specified and as directed.

Supply and fix in repairs after taking down the old unserviceable one, fan regulator electronic step socket type 300 watt as specified and directed.

Supply and fix in repairs after taking down the old unserviceable one, PVC angular holder polycarbonate complete as specified and directed.

Supply and fix in repairs after taking down the old unserviceable one, MCB SP 32 Amp, 'C' curve, 10KA braking capacity 230/240 volt AC as specified and directed.

Supply and fix in repairs after taking down the old unserviceable one, MCB SPN 40 Amp 10KA braking capacity 230/240 volt AC as specified and directed.

Supply and fix in repairs after taking down the old unserviceable one, MCB isolator, 4 pole 63 Amp 10KA braking capacity 415 volt AC as specified and directed.

Supply and fix in repairs after taking down the old unserviceable one, MCB isolator, 4 pole 100 Amp 10KA braking capacity 415 volt AC as specified and directed.

Supply and fix in repairs after taking down the old unserviceable one, switch piano 5 amp flush type as specified and directed.

Supply and fix in repairs after taking down the old unserviceable one 36 watt, 4 pin, non retrofit CFL complete alll as specified and directed.

Supply and fix in repairs modular switch 1 way, 6 amps, 1 module

Supply and fix in repairs modular switch 1 way, 16 amps, 2 module of

Supply and fix in repairs modular bell push 1 way, 10 amps, 2 module,

S/F in repairs modular socket, 6 Amps, 5 pin combined 2 module

S/F in repairs modular socket, 6/16 Amps, 3 pin combined 2 module,

S/F in repairs modular fan regulator, dimmer type, 400 watt, 2 module,

S/F in repairs modular cover plate, 1 module,

S/F in repairs modular cover plate, 2 module

S/F in repairs modular cover plate, 3 module

S/F in repairs modular cover plate, 4 module

S/F in repairs modular cover plate, 6 module,

S/F in repairs modular cover plate, 8 module

S/F in repairs modular surface mounting GI box of size 3 x 3, 1/2 module

S/F in repairs modular surface mounting GI box of size 4 x 3, 3 module

S/F in repairs modular surface mounting GI box of size 5 x 3, 4 module

S/F in repairs modular surface mounting GI box of size 8 x 3, 6 module,

S/F in repairs modular surface mounting GI box of size 5 x 5, 8 module,

S&F in repair Fan capacitor of capacity 2.5 mfd epoxy filled type complete all as specified and as directed

S&F in repairs 9 Watt LED T5 batten fitting including provision of PVC insulated sheathed round flexible with multi strand copper conductor of size 1.5 sqmm 3 core 1100 Volts grade complete all as specified and as directed.

S&F in repair Ultra bright 20W LED polycarbonate tubelight with very high efficacy suited for installation in existing T8 tubelight with G13 lamp hlders to give glare free light all as specified and directed.

Supply and fix in repair 35 watt energy savings Bldg/hanger light Luminaries with pressure die-cast aluminium housing with heat resistance toughtened glass & IP 65 protection, fixed with existing GI Bracket, Clamp, Nut, Bolt and washer, connection with 1.5 sqmm 3 run copper wire from junction box all as specified and directed.

Supply and fix in repair 30 watt energy savings Bldg/hanger light Luminaries with pressure die-cast aluminium housing with heat resistance toughtened glass & IP 65 protection, fixed with existing GI Bracket,Clamp, Nut, Bolt and washer , connection with 1.5 sqmm 3 run copper wire from junction box all as specified and directed.

Supply and fix in repair 40 watt energy savings Bldg/hanger light Luminaries with pressure die-cast aluminium housing with heat resistance toughtened glass & IP 65 protection, fixed with existing GI Bracket,Clamp, Nut, Bolt and washer , connection with 1.5 sqmm 3 run copper wire from junction box all as specified and directed.

Schedule of Credit

M/S D P BERLIA

M/S K S Enterprise

M/S R G Construction

J D construction

M/s United Builders