REPAIR TO JOINERY, CGI SHEETING, JOINERY, PLUMBING WORK, WALLING, OH TANK, FLOORING, PLINTH PROTECTION, JAFRI WALL, TILING IN CERTAIN UNITS NEAR BHISHAM GATE UNDER GE (A) JAISALMER

Amount

Taking down chowkats or frames (without taking of shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified & directed by Engineer-in-charge.

Taking down chowkats or frames (without taking of shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified & directed by Engineer-in-charge.

S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded all as specified & directed by Engineer-in-charge. Note :- To be fixed at any floor level not more than triple storey.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified & directed by Engineer-in-charge. Note :- To be fixed at any floor level not more than triple storey.

S&F, stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.00mm and fixed with stainless steel wire staples complete all as specified & directed by Engineer-in-charge.

S & F, 35 mm thick second class hard wood factory made plain, framed, panelled shutters (Two panels), with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and Style as per IS:1003 (Part-1), kiln seasoned and chemically pressure treated all as specified & directed by Engineer-in-charge.

S & F, 30 mm thick Second class hard wood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified & directed by Engineer-in-charge.

Hacking out old broken glasses (any thickness, size, quality or description) from steel/wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified & directed by Engineer-in-charge.

S&F, 3mm thick, sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each panes complete all as specified & directed by Engineer-in-charge. Note :- To be fixed at any floor level not more than triple storey.

S&F, 100mm size, butt hinges, medium weight, cold rolled mild steel including necessary welding if required all as specified & directed by Engineer-in-charge.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified & directed by Engineer-in-charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with single piece extruded PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement of single piece extruded PVC profile for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified & directed by Engineer-in-charge.

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profile with MS square tube, supplying and fixing in opening as per specifications & directed by Engineer-in-charge.

S&F 150 mm size aluminium anodised barrel tower bolts of extruded section all as specified & directed by Engineer-in-charge.

S&F 150 mm size extruded aluminium handle, fabricated type, anodiesed complete all as specified & directed by Engineer-in-charge.

M&L for preparing new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified & directed by Engineer-in-charge.

M & L preparation of new steel surfaces exc 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer primer complete all as specified & directed by Engineer-in-charge.

Demolition of cement concrete ground floors and paving not exc 15 cm thick (below or above GL) complete all as specified & directed by Engineer-in-charge.

Dismantling floor hearth or wall tiling including cement mortar bedding and removing unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.

M&L for 25mm thk PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in subbase of floors complete all as specified & directed by Engineer-in-charge.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm (300mm x 300mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6, all as specified and directed.

M & L Non Skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,(600mm x 600mm) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6, all as specified and directed.

M & L Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM 1:4 etc complete all as specified & directed by Engineer-in-charge.

M&L for granite 20mm of any type work ( table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) including pointing in white cement 1:2, using marble dust with admixture of pigment to match the shade of granite stone including cutting and polishing laid on 15 mm thick screed bed in CM 1:4 set and jointed.

M&L for 75mm thk cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in subbase of flooring/hard standing as specified

M&L for PCC 1:2:4 type B1, 50mm thick using 20mm graded aggregate as in flooring complete all as specified & directed by Engineer-in-charge.

M& L for PCC 50mm thk type C1 1:3:6 (20mm graded stone aggregate laid in alternative as in plinth protection including finished the surface even and fair without using extra cement and filling the joints with mastic filling ie one part of bitumen 85/25 & 3 parts of sand by weight complete all as specified & directed by Engineer-in-charge.

Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar complete all as specified & directed by Engineer-in-charge.

M&L squared rubble walling Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 all as specified.

S & F in repair vitreous china squatting pan orissa pattern size 580x440mm white with integral foot rest including P or S trap and concrete for necessary fixing complete all as specified & directed by Engineer-in-charge.

S & F in repair vitreous china wash down water closet pan (Pedestal Pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat , black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified & directed by Engineer-in-charge.

S & F plastic EWC seat cover, coloured closed pattern with flat bottom and cover of cera model cat pt 2308 and mild steel chromium plated or aluminised hinging device complete in repairs complete all as specified & directed by Engineer-in-charge.

S & F in repair Bib tap cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia complete all as specified & directed by Engineer-in-charge.

S & F in repair Pillars taps fancy type cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed complete all as specified & directed by Engineer-in-charge.

S & F in repair 15 mm Stop valve fancy type cast copper alloy chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified & directed by Engineer-in-charge.

S & F in repair 20mm stop cock fancy type cast copper alloy chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends or for unions etc complete all as specified & directed by Engineer-in-charge.

S & F in repair PVC valveless, syphonic action type flushing cistern, low level, white,with inlet, ball valve, float and handle 10 ltrs capacity incl brackets complete all as specified & directed by Engineer-in-charge.

S & F in repair vitreous china wash basin white flat back size550x400mm excl chain and plug and porcelain stopper but incl CI bracket. PTMT waste coupling and PVC waste pipe 75 cm long and 15mm dia PVC connection etc complete all as specified & directed by Engineer-in-charge.

S & F in repair kitchen sink made of stainless steel 1mm thick kitchen with plugs, washers and wastes: including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified & directed by Engineer-in-charge.

S & F in repair for pressure jet for western type water closet with PVC connection 600 t0 900 mm long including brass head screw and suitable washer complete all as specified & directed by Engineer-in-charge.

S & F in repair 600 mm long PVC connection pipe of 15mm bore with PTMT nut at both ends complete all as specified & directed by Engineer-in-charge.

S & F in repair looking mirror 600x450mm with PVC sheet frame and back supported with 6mm thick AC building board or plywood sheet complete all as directed by Engr-in-Charge

S&F in repair Vitreous china urinal ,half stall type ,complete incl providing and fixing plugs bedding urinal against wall in CM1:4 securing urinal to plug with and incl 60mm long brass screws ,pointing around urinal back in cement ,incl grating union for discharge pipe etc complete all as specified & directed by Engineer-in-charge.

Taking up or down steel tubing 15mm dia and connections including cleaning for refixing complete all as specified & directed by Engineer-in-charge.

-Ditto- All as per above item but 20mm dia

S & F 15mm dia medium grade GI tubing with all fitting and fixed to wall, ceiling or laid in floors etc complete all as specified & directed by Engineer-in-charge.

-Ditto- All as per item above but 20mm dia

S & F PVC (SWR) multi floor trap 75mm dia with grating including joint with solvent cement complete all as specified & directed by Engineer-in-charge.

S & F in repair Chromium plated tubular aluminium anodised 60 cm long towel rail 20mm dia D type complete fixed with screws etc complete all as specified & directed by Engineer-in-charge.

Dismantling water tanks and removing to store (exc 250 and not exc 500 ltr capacity) complete all as specified & directed by Engineer-in-charge.

Dismantling water tanks and removing to store (exc500 and not exc 1000 ltr cap) complete all as specified & directed by Engineer-in-charge.

M & L rotational moulded polythene water storage tank (cylindrical vertical with closed top, white colour ) hoisted and fixed in position all as specified in SSR part I capacity of tank 500 ltrs complete fixed in repairs complete all as specified & directed by Engineer-in-charge.

-Ditto- All as per above item but 1000 ltr capacity.

S&F in repair PVC ball valve 20 mm dia high pressure with polythene float and fly nut complete screwed for iron pipe or brass fernule complete all as specified & directed by Engineer-in-charge.

Dismantling wrought iron or mild steel work of any description not othervise provided for that purpose complete all as specified & directed by Engineer-in-charge.

S & F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) type of Fe 410-W (Gde E- 250) quality 'A', complete all as specified & directed by Engineer in charge.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, all as specified & directed by Engineer-in-charge.

S&F Prepainted galvanume aluminium zine coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strenght 550 Mpa in roof coverings fixed with self tapping screws all as specified & directed by Engineer-in-charge.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-Charge.

S & F in repair 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end complete all as specified & directed by Engineer-in-charge.

Cutting chases pinning in for concealed water tubing etc and making good cutting not exc 10cm in width or girth to brick stone wall or concrete surfaces complete all as specified & directed by Engineer-in-charge.

Taking down cement or cement lime plaster, any description on brick or stone surfaces of any position etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed by Engineer-in-charge.

M&L for rendering 15 mm thick plaster in cement mortar (1:6) on fair faces of stone wall or concrete surfaces of walls and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge.

M&L for rendering 15 mm thick plaster in cement mortar (1:4) on fair faces of stone wall or concrete surfaces of walls and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge.

M&L for rendering 10 mm thick plaster in cement mortar (1:3) mixed with WPC on concrete surfaces of roof top and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid seperately as supply only).

M & L for plastering 5mm in CM 1:4 on ceiling / chajja complete all as specified and directed.

M & L for two coats of cement base paint over a coat of cement primer on walls or newly plastered surfaces complete all as specified and directed.

M & L preparation of new plastered surfaces and applying three coat of white wash on walls complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of destemper oil emulsion over a chalk whiting and as directed by Engr-in-charge.

M & L preparation of new plastered surfaces and applying three coat of white wash on ceiling complete all as specified & directed by Engineer-in-charge.

Preparation of old decorated surfaces and applying one coat of white wash on ceiling including in narrow width, bands, cornices, pilasters etc., complete all as specified and as directed

Preparation of old decorated surfaces and applying one coat of cement base paint on walls including in narrow width, bands, cornices, pilasters etc., complete all as specified and as directed.

Preparation of old painted surfaces and applying one coat of synthetic enamel paint on steel surfaces over 10cm width or girth complete all as specified and as directed.

Preparation of old painted surfaces and applying one coat of synthetic enamel paint on wooden surfaces over 10cm width or girth complete all as specified and as directed.

S & F figured glass pin head type 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane and all as specified.

S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats complete all as specified & directed by Engineer-in-charge.

S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified & directed by Engineer-in-charge.

M&L for 75mm thk cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in subbase of flooring/hard standing as specified

M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade using grey cement and pigment of any shape and size conforming to IS 15658 - 2006, complete. Note :- Pattern of tiles to be Rubber moulded or equivalent as approved by GE.

M & L 30mm sand cushion, filling under floors or in foundations including watering and consolidation complete all as specified and directed.

S & F Chequered cement concrete tiles 20cm X 20 cm X 25mm thk with grey cemnt and pigments, set jointed in neat cement slurry as in floors/path etc over and including 15mm thk screed bed in CM 1:6 complete all as specified and directed.

Dismantling Trellis work (Jafri) one way, including taking as under of battens in trellis (posts and rails measured separately) complete all as specified and directed.

M&L for 35mm thick precast cement concrete louvers and jallies type C-0 (1:3:6) using 12.50mm graded aggregate (measured solid), including all mouldings but excluding frame, set in cement mortar 1:4 all as directed.

M& L for Providing precast ce- ment concrete Type C1 (1:3:6) by using 20mm graded aggregate in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with ma?sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:6, complete with joints to match complete all as specified & directed by Engineer-in-charge.

Dadhich Engineers

BHAGWATI CONSTRUCTION

JASOL MAA ENTERPRISES

Leelashah Enterprises

M/s Shri Inder Construction Company