SPECIAL REPAIR OF OFFICERS MESS BLDG NO. P-35 OF 194 FD REGT AT TALBEHAT MIL STATION

Dismantling, floor hearth or wall tiling inclduing cement mortar bedding and removing rubbish complete all as specified and directed.

M & L for digital HD coloured Ceramic tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.42 sqm but not exc 1.00 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6), complete all as specified and directed.

M & L for digital HD coloured Ceramic tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.38 sqm but not exc 0.72 sqm on walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile over and including cement mortar 1:4, 10mm thick plaster complete all as spd & directed.

Material and Labour for glazed ceramic exterior wall tiles 7 to 8 mm thick etc set & jointed in cement and pointed in coloured cement to match the shade of tile over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified & directed. Make – Johnson (Endura) or equivalent in Johnson tiles / Kajaria / Orient Bell/AGL/ Euro tiles, sample as approved by AGE (I).

Material and Labour for Granite stone best quality (of any type), 20 mm thick machine cut, skirting / dedo beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing including dismentling of stone slab complete all as specified and directed

M&L for 12 mm thick toughened glass best quality and glazing with wpc glazing bar in square exc 1.2 sqm in each pane complete all as specified & directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete.

M&L for POP ceiling including cornice of POP fixed on anodised snap grid frame work for false ceiling with size of grid 605x605mm consisting of main and cross tee of size 36.5 x 25 x 1.4 mm (wt 0.24kg/RM) and 23.5 x 26.4 x1.4mm (wt 0.191kg/ RM)respectively including aluminum angle 25x25 1n4 mm &provn of hangers of GI wire of 2mm dia and providing painting with two coast of synthetic enamel paint over a coat of primer on wooden surface complete including making POP Cornices 100 mm wide of required design as approved by Engineer-in-Charge.

M & L for wallpaper for 230 GSM to interior wall of roll size 0.53 X 9.5 mtr complete all as design as approved by Engineer-in-Charge.

S&F for 25 mm thickness insulated PVC wall Lining consisting of insulated panels having expanded polystyrene (EPS) stuck to 2 mm thick single side prelam PVC sheet duly fitted into the wall as per specification and drawing complete.

Supply & Fixed in repair Aluminium composite panel sheet 3mm thick PVCF of brand name 'Euro bound'/"Alstrong"./ "Viva" fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required cilicon & screw as in ceiling/coloumns and in vertical surface complete all as specified and directed.approved sample as kept in AGE(I) Office.

Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MD land complete all as specified and directed. Note : Height of Bldg Up to fourth floor.

Material and labour for 15-25 mm thick ready mix plaster in multy layer with liquid water proofing compound (Dr Fixit LW+) on fair faces of brick wall or concrete surfaces, finished even and fair, including use of scaffolding, complete all as specified and directed.by Engr-in-Charge. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s ACC Products / M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.

Material and labour for 12 mm thick Ready Mix Plaster in single layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, on other than fair faces of concrete surfaces in wall ( internal surface ) and finished even and smooth without using extra cement, complete all as specified and directed. by Engr-in-Charge. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s ACC Products / M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles including removing debris out side MD land complete all as specified and directed.

Material and Labour for Brick work with sub class 'B' brick straight or curved on plan exc 6 mtr mean raddius built in CM 1:6 complete all as specified and directed.

Material and Labour for preparation of newly plastered surface of wall and applying two coats of oil emulsion distemper over a coat alkali resistant primer coat through authorised applicators of paint manufacturers only of approved shade complete all as specified and directed Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE complete all as specifeid .

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surface of any description, over 10cm in width or girth not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Supply & Fixed in repair 12 mm thickness fluted wpc indoor panel fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required cilicon & screw as in ceiling/coloumns and in vertical surface complete all as specified and directed.approved sample as kept in AGE Office.

Taking down carefully copper/Aluminium point wiring (light/fan/socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall, floors etc complete all as directed.

Taking down carefully complete light fittings removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall, floors etc complete all as directed.

Taking down Distribution Boards along with MCB's incl removing the same from site and making good to the disturbed surface complete. Note: All taken down MCBs should be deposited to MES store by the contractor without any extra charge.

Taking down existing sub main wiring of any type and description including removal of teak wood batten/pipe etc complete.

M/L for point wiring concealed type with 1.5 sq mm FRLS PVC insulated single core multithreaded copper conductor cable 1100 volts grade incl 1.5 Sq mm PVC insulated copper conductor cable as earth continuity conductor drown through in and incl FRLS PVC rigid conduit not less than 20 mm dia alongwith chase/ chisel cutting, PVC conduit and making good to the disturbed surface and match the existing colour all as specified and directed : Wire: Make -Mescab/Polycab/KEI/Havells/Finolex PVC conduit: Make -Polycab/Precision/Plaza/Kalinga Note:- (i) On RCC ceiling/column, false ceiling, AC/Metallic Sheet ceiling wiring done on surface with conduit/PVC Casing capping and its accessories. (ii) Cutting of wall, floor, PCC work and white wash for making of good to disturbed surfaces shall be included in the rate quated.

One light/fan/bell point controlled by one No piano type switch 5 Amps single pole one way

One socket outlet 5/3 pin 6 AMPS controlled by one switch on the same board.

One socket outlet 5/3 pin 6 AMPS controlled by one switch on independent board.

All as per item NO 25 above but 3 pin socket out let 15/16 Amps on the independent Board all as spfd with single core FRLS PVC insulated cable multistranded copper conductor of size 4 sq mm for phase & neutral & 4 sq mm for earth continuity conductor.

S&F modular switch single pole one way 6/10 Amp 240 volt. MAKE:- Havells(Oro)/Anchor(Roma classic)/Philips

S&F modular switch single pole one way 16/20 Amp 240 volt. MAKE:- Havells(Oro)/Anchor(Penta)/Gold Medal

S&F for modular socket 5 Pin 6/10 Amp with shuttered, suitable for 2 module 240 volt. MAKE:-Havells(Oro)/Anchor(Roma classic)/Philips

S&F for modular socket 5 Pin 6/16 Amp flush type, with shuttered, suitable for 2 module. Make: Havells(Oro)/Anchor(Roma classic)/Philips

S&F for modular Outer and Inner plate for 2 module MAKE:-Havells(Oro)/Anchor(Roma classic)/Philips

S&F for modular Outer and Inner plate for 3 module MAKE:-Havells(Oro)/Anchor(Roma classic)/Philips

S&F for modular Outer and Inner plate for 6 module MAKE:-Havells(Oro)/Anchor(Roma classic)/Philips

S&F modular type fan regulator electronic step type, suitable for 2 modules 100 watt, 240 volt. MAKE:-Havells(Reo)/Anchor(Roma classic)/Philips

M&L for sub main concealed wiring with two single core PVC insulated of size 6 sqmm FRLS unsheathed copper conductor 1100 volt grade multistandard and incl drawn through and including non metallic rigid PVC conduit and conduit accessories of 25 mm external dia and conduit FRLS accessories of ISI marks medium grade including 6.0 sqmm FRLS copper wire for earth continuity wire and connected of common earth dolly. Wire: Make -Mescab/Polycab/KEI/Havells/Finolex PVC conduit: Make -Polycab/Precision/Plaza Note:- (i) One run of conduit two run of 6 sq mm copper conductor & one run of 6.0 sq mm copper conductor is measured as one unit. (ii) On RCC ceiling/column, false ceiling, AC/Metallic Sheet ceiling wiring done on surface with conduit and its accessories. (iii) Cutting of wall, floor, PCC work and white wash for making of good to disturbed surfaces shall be included in the rate quated.

S&F in replacement single pole and neutral enclosure with a two pin and earth socket complete with one single pole MCB of 20 to 32 Amp 240 volt. Make:- Legrand/Hager/Schneider/IndoAsian/Siemens.

S&F sheet metal enclosure double door for MCB DB single pole and neutral 8 way with 200 Amps 240 volts double door (Metallic) type. Make:- Legrand/Hager/Schneider/IndoAsian/Siemens.

S&F MCB SP 6 to 32 Amps 240 volts 'C' series, 10 KA, 50 Hz, confirming to IS/IEC-60898-1. Make:- As approved Make of DB

S&F MCB SPN 40 to 63 Amps 240 volts 'C' series, 10 KA, 50 Hz, confirming to IS/IEC-60898-1. Make:- As approved Make of DB

S&F vertical sheet metal enclosure double door for MCCB DB Triple pole and neutral 4 way, (4+12) with 200 Amps rated bus bar 440 volts earth dolly IP-43, IK09, Make:- Legrand/Hager/Schneider/IndoAsian/Siemens/Havells Note:-MCB are measured and paid separately under respective items.

S&F MCCB 4 pole 63 Amp, 440 volt 'C' series, 16 KA, 50 Hz, confirming to IS/IEC-60898-1. Make:- As approved Make of DB

Material and Labour for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground( earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized iron earth lead 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in electrical plate No 3 of SSR Pt I including necessary excavation and earth work PCC (1:3:6) type C-1 with 50 mm thick pre cast RCC ( 1:2:4) type B-1 cover slab framed with 50X30X4 mm MS angle (reinforced with 6 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar) including providing charcoal or coke and magnesium sulphate in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (medium grade) wire mesh, copper lugs, complete in all respect., GI earth wire protected by 15 mm bore (light grade) galvanized iron pipe and other end connected to the earth bar (test point) made of MS flat (400X32X6 mm) bend in ‘D’ shape and fixed to wall by means of fast nut or bolt grouted in to wall at 1 mtr from plinth height. 4sqmm PVC insulated (colour green) copper conductor single run as earth continuity conductor along with 15 mm PVC conduit grouted in wall or fixed on wall surface to be continued up to main switch board and fix with common earth dolly as directed by EIC . Disposal of soil to a distance not exceeding 50 mtr and necessary testing on completion complete all as specified and as directed.

Supply and fixing exhaust fan made of sturdy engineering plastic body complete with louvers shutters, AC single Phase. 230V of size 300 mm sweep copper winding with, blades and frame and louvers shutters, RPM 1200 complete all as specified and as directed by Engineer-in-Charge.Make : Havells / CG

Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete with all as specified and directed by Engineeer-in-Charge. Make : Havells / CG

Supply and fixing LED building security light fitting, 15/20 Watt made up of pressure die cast aluminium housing, inbuilt driver, top opening, IP 66, 230 Volt, complete connection with PVC insulated multi stranded copper flexible wire twin core of suitable size from nearest source complete all as specified and as directed by Engineer-in-Charge. Make Havells/Surya/Crompton/Philips

Supply and fixing building securty light bracket bend type complete with 2.0m long G.I. pipe 40mm dia light grade, with suitble clamp and nut bolts complete all as specified and directed by EIC.

S&F Square 2x2 Panel LED Panel Light, Warm White, 6000 K Make : Panasonic or equivalent complete all as specified and as directed.Make : Havells/ Panasonic/ Surya

Supply and fixing LED 4' batten light 18/20 Watt 230 Volt, complete connection with PVC insulated multi stranded copper flexible wire twin core of suitable size from nearest source complete all as specified and as directed by Engineer-in-Charge. Make Havells/Surya/Crompton/Philips/Bajaj

Supply and fixing LED 2' tube light fittings 9/10 Watt 230 Volt, complete connection with PVC insulated multi stranded copper flexible wire twin core of suitable size from nearest source complete all as specified and as directed by Engineer-in-Charge. Make Havells/Surya/Crompton/Philips/Bajaj

M&L for UG cable XLPE insulated heavy duty electric cables with Stranded alluminium conductor, 1100 volts grade, passing through trenches/ducts/pipes and climbing on poles/walls including fixing with proper size of alluminium lugs complete all as specified and directed of the followings. NOTE:- 1. Excavation and earth work shall be measured and paid separately under relevant item.

16 Sq mm 4 Core

Excavation in trenches in soft/disintegrated rock/hard dense soil etc n. exc 1.5 m wide and n.exc 1.5m in depth for foundation etc or for shafts, manholes, pier holes etc n.exc 10 Sqm on plan and n.exc 1.5 meter in depth and getting out complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm each layers complete all as specified and directed.

Removal of excavated material & surplus spoil n. exc 50 m to a distance and depositing where directed at a level n.exc 1.5 meter above the starting point complete all as specified and directed.

M&L for spreading M-sand cushioning to underground cable in layers of 23 cm (8 cm deep before laying of cable and 15cm deep over the cable) after laying the cable in trenches including punning thickness up to 18 cm complete all as specified and directed. Note: - Only punned thickness will be considered for payment.

Supply and laying Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm for cable protection laid length wise perpendicular to the axis of cable complete all as specified and directed.

Note :- Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.)