Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.7 LAccepted-AOC HOUSE NO 1 I V LRC COLONY NOTUN BOSTI DIMAPUR DIMAPUR NAGALAND 797112 | DIMAPUR | NAGALAND | 797112 | L1 | Accepted-AOC Reasonable rate | |
| 2 | L2₹46.1 L+₹1.8 L (4.05%)Rejected-AOC | L2 | Rejected-AOC Quoted amount are higher than L1 | |
| 3 | L3₹47.4 L+₹3.1 L (6.92%)Rejected-AOC | L3 | Rejected-AOC Quoted amount are higher than L1 | |
| 4 | L4₹47.5 L+₹3.2 L (7.15%)Rejected-AOC RANGAPAHAR CROSSING RAILWAY GATE NO 1 DIMAPUR 797 112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L4 | Rejected-AOC Quoted amount are higher than L1 | |
| 5 | L5₹47.5 L+₹3.2 L (7.25%)Rejected-AOC OLD DAILY MARKET DIMAPUR 797 112 NAGALAND | PEREN | NAGALAND | 797112 | L5 | Rejected-AOC Quoted amount are higher than L1 |
Tender Value
₹43.3 L
EMD Value
₹86,600
Closing Date
25 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
SPL REPAIRS TO BLDG NO T 22 T 23 AND T 24 IN I ZONE UNDER AGE BR I AT RMS
2024_MES_644513_2
8706/C/E8
Open Tender
Civil Works
Item Rate
120 days
RANGAPAHAR
Class D Category a(i)
2 documents required · 2 mandatory
₹500
GE 868 EWS
₹86,600
30 Mar 2024
13 Mar 2024
27 Mar 2024
13 Mar 2024
25 Mar 2024
19 Mar 2024
13 Mar 2024 - 15 Mar 2024
Amount
Demolition of plain cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing demolished material off the premises etc complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and as directed.
Taking down chowkhat or frames not exc 1.5 Sqm each (without taking off shutter from the frame) etc complete all as specified and as directed.
Taking down chowkhat or frames exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutter from the frame) etc complete all as specified and as directed.
Taking down shutter not exceeding 1 Sqm each etc complete all as specified and as directed.
Taking down shutter of any description exceeding 1.0 Sqm nexc 2Sqm each etc complete all as specified and as directed.
Dismantling timber scantlings unframed work 40 sqcm and over in section in any position etc complete all as specified and as directed.
Demolition of reed, lathing single or double, including battens and plaster or chicken wire lathing etc complete all as specified and as directed.
Dismantling Asbestos cement sheet (Corrugated, semi corrugated etc ) in roof covering etc complete all as specified and as directed.
Disamantling wall and ceiling boards (fibre, pulp, insulation, etc.) any thickness including cover fillets etc complete all as specified and as directed.
Dismantling boarding any description fixed in any position with nails etc complete all as specified and as directed.
Dismantling of wrought iron or mild steel work of any description etc etc complete all as specified and as directed.
M & L for PCC (1:4:8) type D-2, 100 mm thick (using 40 mm graded stone aggregate) as in sub base etc complete all as specified and as directed.
M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid, jointed with grey cement and no pigment complete all as specified including preperation of formation bed over 25 mm thick sand cusion and pointed in colour cement mortar 1:3 etc complete all as specified and as directed.
M&LVitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in CM (1:6) etc complete all as specified and as directed.
All as per Item No. 15.00 (here-in-before) but on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick bedding layer in CM 1:4.
M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) in section exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in CM (1:6) etc complete all as specified and as directed.
All as per Item No. 17.00 (here-in-before) but on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick bedding layer in CM 1:4.
M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) in section exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in CM (1:6) etc complete all as specified and as directed.
All as per Item No 19.00 (here-in-before) but on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick bedding layer in CM 1:4.
M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick CM (1:4) backing coat etc complete all as specified and as directed.
M&L for granite of (of any type) 18-20 mm thick as in platforms ,machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with nosing 10 mm thick screed bed in CM (1:4) etc complete all as specified and directed.
S & F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and as directed.
S & F Pre-painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and as directed.
M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410 -W (Gde-E- 250) quality-A etc complete all as specified and as directed.
S&F for joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated confirming Fe 410-W (Gde-E- 250) quality- A etc complete all as specified and as directed.
S&F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410 -W (Gde-E- 250) quality-B etc complete all as specified and as directed etc complete all as specified and as directed.
S&F steel work in tubular trusses, post, purlins including special shaped washer etc. Complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st-240 etc complete all as specified and as directed.
S&F 2nd class hard wood scantling as in framed work etc clean sawn etc complete all as specified and as directed.
All as per item No. 28.00 here-in-before but except timber etc complete all as specified and as directed.
S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-painted self embossed, textured designer board E-Board Classic to be fixed or laid with GI frame grid/section size 600mm x 600mm with main runner 38x24x0.9 mm thick, cross tee 8.6x24x0.9mm and wall angle 19 x19x0.9mm duly suspended with 4mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size etc complete all as specified and as directed.
S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing etc complete all as specified and as directed.
M&L for Solid PVC Wall Lining consisting of 5mm thick Plain or coloured with wood grains printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame etc complete all as specified and as directed.
M&L for second class hardwood plain fillets exc 13sqcm and not exc. 25sqcm, square or rectangular in section, wrought, secured with nails or brads etc complete all as specified and as directed.
M & L for 25mm thick and 200 mm width second class hard wood boarding , plained one side with butt joints as in eaves boards etc complete all as specified and as directed.
M&L for 75 mm thick PCC 1:3:6 type C2 , using 40 mm graded agg in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) etc complete all as specified and as directed.
M&L for 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pined joints etc complete all as specified and as directed.
M&L for 30 mm thick factory made 2nd class hardwood plain framed pannelled shutter (any number of panels) with panels of timber flat on both sides or of veneered particle board medium density , wood particle board with commercial face veneers , supplied and fitted to chowkats etc complete all as specified and as directed.
M&L for 35mm thick factory made 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) etc complete all as specified and as directed.
M&L for 30mm thick factory made 2nd class hard wood Glazed and skelton window and ventilator shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated without sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) etc complete all as specified and as directed.
S&F powder coating aluminium frame(minimum thickness 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.
S&F for powder coating aluminium window and ventilator shutters, fixed type without sash bar, aluminium section of size 40 x 18 x 1.29mm thick including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and as directed.
S & F for powder coating aluminium door shutters, without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing ,handles 2 Nos in each door,hinges, anodised aluminium snap beading screws,mortice lock with keys etc complete all as specified and as directed.
M&L for fixing 4 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats complete all necessary items to fix with frame and etc complete all as specified and as directed.
S&F Sheet glass 4.8mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane etc complete all as specified and as directed.
M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing etc complete all as specified and as directed.
S&F for mild steel conforming to Fe 410-0 or Fe 310-0 in bands, straps, supports or stays for rain water, including bolts, if required, hook and pintle hinges; hand made sliding bolts; clamps; hold fasts; hooks for hanging fans and similar small articles etc complete all as specified and as directed.
S & F guard bars to windows, plain, let in and fixed independently in steel frames including welding etc guard bars and similar work conforming to Fe-290 Grade E-165 etc complete all as specified and as directed.
S&F in repairs Mortice lock,vertical type Brass 2 levers, size 100 mm etc complete all as specified and as directed.
S&F in repairs Hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws 100mm size etc complete all as specified and as directed.
S&F in repair for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed etc complete all as specified and as directed.
S&F in repair floor door stopper overall length of cover plate 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc complete all as specified and as directed.
S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.
M&L butt hinges medium grade cold rolled mild steel and fixed size of hinges 100 mm long size etc complete all as specified and as directed.
M&L butt hinges, medium weight 75 mm long size etc complete all as specified and as directed.
S&F Aluminium anodised barrel tower bolt of extruded section and fixed 100 mm long etc complete all as specified and as directed.
S&F Aluminium anodised barrel tower bolt of extruded section and fixed 200 mm long etc complete all as specified and as directed.
S&F Aluminium handle cast type anodised 150 mm long etc complete all as specified and as directed.
S&F 125mm size aluminium handles,cast type,anodised all as directed etc complete all as specified and as directed.
S&F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type fixing clips of sheet cast or extruxded section(300 mm long) etc complete all as specified and as directed.
S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane etc complete all as specified and as directed.
Taking down cement plaster on brick walls including raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed.
Demolition of brick work built in cement mortar incl all quions, arches pillars etc but excl ashalar facing etc complete all as specified and as directed.
M&L brick work with sub class B bricks(using old size burnt bricks) straight or curved on plan exc 6 m mean radius in CM 1:6 etc complete all as specified and as directed.
M&L brick work with sub class B bricks (using old size burnt bricks) straight or curved on plan to any radius in half brick thick walls built in CM 1:4 etc complete all as specified and as directed.
M&L GI wire netting 0.71 mm dia and 12 mm mesh lathing in to reed and bird proofing in walls incl all laps cutting and waste etc complete all as specified and as directed.
M&L 15mm thick plastering in CM (1:4) on one side of lathing in two separate layers even and smooth without using extra cement etc complete all as specified and as directed.
M&L 10 mm thick plastering in CM (1:6) on the other side of lathing finished even and smooth without using extra cement etc complete all as specified and as directed.
M & L rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete work even and smooth without using extra cement etc complete all as specified and as directed.
M & L rendering 15mm thick in cement mortar 1:6 on fair faces of brick or concrete work even and smooth without using extra cement etc complete all as specified and as directed.
M&L for applying two coats of oil bound distemper on new plastered surfaces of walls including preparation of surface and applying one coat of primer, on plastered surfaces, preparatory to distempering etc complete all as specified and as directed.
M&L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil bound distemper of approved shade/tint etc complete all as specified and as directed.
M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls including priming plastered and other surfaces with alkali resistant priming paint etc complete all as specified and as directed.
M&L for complete removal of existing treatement on old plastered surface of wall & applying two coats of cement base paint over a coat cement primer etc complete all as specified and as directed.
M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink wood primer etc complete all as specified and as directed.
M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and as directed.
M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer etc complete all as specified and as directed.
M&L for preparation of old steel surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified and as directed.
Taking up or down steel tubing and connections including with all fittings for 15 mm bore GI tubing etc complete all as specified and as directed.
Taking up or down steel tubing and connections including with all fittings for 20 mm bore GI tubing etc complete all as specified and as directed.
Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling as directed, for 15mm bore GI tubing etc complete all as specified and as directed.
Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling as directed, for 20mm bore GI tubing etc complete all as specified and as directed.
S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore etc complete all as specified and as directed.
S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore etc complete all as specified and as directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, as per specification etc complete all as specified and as directed.
S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined to-gether with solvent cement as per specification etc complete all as specified and as directed.
S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook etc complete all as specified and as directed.
S&F sink without drainage board made of stainless steel 1 mm thick with plugs and wastes pipe including in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste pipe and coupling 32 mm in repair etc complete all as specified and as directed.
Supply and fixed in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed etc complete all as specified and as directed.
S & F in repairs vitreous china bowl urinal flat back size of 465x355x265 mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) etc complete all as specified and as directed.
S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Seat cover complete all as directed.
S&F in repair PVC low level flushing cistern 10 ltr capacity syphonic action type white body with MS bracket , inlet ball valve, float handle and flush pipe (for EWC or WC) etc complete all as specified and as directed.
S& F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as spfd & directed.
S&F in repairs for 15mm dia bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed etc complete all as specified and as directed.
S&F in repairs for 15mm dia stop valves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed etc complete all as specified and as directed.
S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers etc complete all as specified and as directed.
S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms) etc complete all as specified and as directed.
M&L for RCC nominal mix (1:1.5:3) type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including demolition etc complete all as specified and as directed.
M&L for TMT bars 10 mm dia and above, as in reinforcement for concrete, cut to length, bent to shape required including cranking , bending , hooking ends and binding with and including mild steel wire(annealed) not less than 0.9 mm etc complete all as specified and directed.
M&L for TMT bars 6 mm to 8 mm dia , cut to length, bent to shape required including cranking , bending , hooking ends and binding with and including mild steel wire(annealed) not less than 0.9 mm etc complete all as specified and directed.
Use and waste for formwork to chullah hoods, chajjas, troughs and similar items including edge etc complete all as specified and directed.
S& F in repairs PVC mounted 5mm thick bevelled edge looking mirror 600 x 450mm including taking down old fixed with chromium plated brass screws and cup washers etc complete all as specified and as directed.
M&L cement concrete type C-2 (1:3:6) (using 40 mm graded stone agg) as in surface channels and drains etc complete all as specified and as directed.
M&L for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in coping including necessary formwork etc complete all as specified and as directed.
S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement etc complete all as specified and as directed.
S&F in repairs for Draperly rod /Harrison rails of CP of 20mm dia with fixing brackets , stops, rollers and rings etc complete all as specified and as directed.
M&L for second class hardwood plain fillets exc 13sqcm and not exc. 25sqcm, square or rectangular in section, wrought, secured with nails or brads etc complete all as specified and as directed.
S&F PVC (SWR) 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floor etc complete all as specified and as directed.
S&F PVC (SWR) 110mm dia bends in any radius etc complete all as specified and as directed.
S&F PVC (SWR) 110mm dia junction single T equal or un equal with an floor etc complete all as specified and as directed.
M & L for 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and as directed.
S & F 75mm bore PVC (SWR) bends any radius etc complete all as specified and as directed.
S & F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal etc complete all as specified and as directed.
M&L dismantling water tank of exc 500 ltr and not exc 1000 ltr Capacity etc complete all as specified and as directed.
S&F rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia etc complete all as specified and as directed.
Dismantling of chicken wire lathing etc complete all as specified and as directed.
Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface etc complete all as specified and as directed.
M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site etc complete all as specified and as directed.
(a) One light/Fan pointcontrolled by one, one way switch .
(b) One 3 pin socket outlet 5 Amps on the same board with other switches.
(c) One 3 pin socket outlet 5 Amps on the switch socket combination.
All as per item No- 118.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
All as per item No- 118.00 here-in-before but with 4.0 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4.0 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
M&L for Switch piano flush type single pole, one way 5A etc complete all as specified and as directed.
M&L for Socket outlet, 2 in 1, 5 pin 5A flush type etc complete all as specified and as directed.
M&L for Switch Socket combination, 2 in 1, 5 pin 6A flush type etc complete all as specified and as directed.
M&L for Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type etc complete all as specified and as directed.
M&L for stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet etc complete all as specified and as directed.
M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock etc complete all as specified and as directed.
Material and labour for (concelaed Type) point wiring including necessary chases cutting of wall for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) PVC sheathed multistranded copper conductor cable 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC conduit with all accessories and sunk modular GI box for mounting of fittings like switch, socket and fan regulator with modular inner plate and cover plate and making good the distrubed surfaces as per the existing etc complete all as specified and as directed.
(a) One light/Fan/Exhaust point controlled by one, one way switch .
(b) One 3 pin socket outlet 5 Amps on the same board with other switches.
(c) One 3 pin socket outlet 5 Amps on the Independent board.
All as per item No- 127.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
M&L for Modular Switch 1 way 6A,1 module etc complete all as specified and as directed. Make : Havells/Legrand/Anchor
M&L for modular switch 1 way 16A, 1 module etc complete all as specified and as directed.Make : Havells/Legrand/Anchor
M&L for Modular Socket ,6A/2/3 pin combined 2 module etc complete all as specified and as directed.Make : Havells/Legrand/Anchor
M&L Modular Socket ,6A/16A-2/3 pin combined 2 module etc complete all as specified and as directed.Make : Havells/Legrand/Anchor
M&L for stepped type electronic fan regulator,120 W-2 module etc complete all as specified and as directed.Make : Havells/Legrand/Anchor
S&F for Metal flush box 3 Module complete all as specified and as directed.
S&F for Metal flush box 6/8 Module complete all as specified and as directed.
S&F for White cover plate with frame 3 Module complete all as specified and directed.
S&F for White cover plate with frame 6/8 Module complete all as specified and directed.
Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Finolex/Havells/RR Kabel Make of caping/casing :- Prestoplast/Finolex/supreme
Taking down S&F for , LED Light fitting 1 x 20 watt (4 Ft), Wall/ Surface mounted, intergrated type with all accessories internally prewired and incl connecting up with and incl twin/ three core twisted flexible copper conductor cable of suitable size in and incl flexible hose from ceiling rose to fitting complete all as specified and as directed. Make : Crompton Geaves Cat No -CCS-102-20-65-SL-DP-NWH/ Bajaj/ Philips.
Taking down S&F for , LED Light fitting 1 x 10 watt (2 Ft), Wall/ Surface mounted, intergrated type with all accessories internally prewired and incl connecting up with and incl twin/ three core twisted flexible copper conductor cable of suitable size in and incl flexible hose from ceiling rose to fitting complete all as specified and as directed. Make : Crompton Geaves Cat No -CCS-102-20-65-SL-DP-NWH/ Bajaj/ Philips.
Taking down Supply , fixing and testing in replacement of LED Bldg Security light fitting of capacity 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting and all as specified and directed by Engr-in-Charge..Make : CG, Cat No- LSTS-20-CDL-M/ Bajaj/ Philips
Supply and fixing LED luminaire 600 mm x 600 mm, 40/42 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
M&L for VTPN 4 way,double door 415 Volts, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity MCB DBs incl taking down of DBs complete all as specified and as directed. Note : MCB TPN/SPN/SP shall be measured and paid seperately under relevant items. Make : Legrand Cat Part No 507611/ABB/Siemens
Supply and fixing MCB TPN 63 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. : Legrand Cat Part No 408618/ABB/Siemens
M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity MCB DBs complete all as specified and as directed. Make : Legrand Cat Part No 507611/ABB/Siemens
M&L for MCB SPN 40 Amps 'C' series, 230 volts, 50 Hz suitable for fixing in MCB DB incl taking down old unsv MCB complete all as specified and as directed
M&L for MCB SP 6-32 Amps 'C' series, 230 volts, 50 Hz suitable for fixing in MCB DB incl taking down old unsv MCB complete all as specified and as directed.
M&L for metal clad AC socket point single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SP 20 Amps complete all as specified and as directed. Make: Havells/HPL/Legrand
Supply & Fixing 1200mm BLDC 5 star ceiling fan with regulator enable motor power * input 27 watt with 10% tolerance * , motor insulation B type , 230-240V 50Hz AC supply 350 rpm , * 225 CMM air delivery* , service value *minimum 7.4 * with complete set 3 blade , canopy, down rod , Shackle remaining all accessories including nut & bolt washer as required & directed . Note : Old Ceiling fan deposit MES Store (AGE E/M)
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm etc complete all as specified and as directed.
S&F for LED Post of light 15 Watt, IP65 energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source Opal cover offers soothing uniform illumination for defferent applications all accessories complete all as specified and as directed. Make :Havells cat No CORALMINIPT15WLED830PSYMTOPC/Bajaj/CG/Philips/ or equivalent as approved by GE
Taking down LT UG cable/ service connection of any size and M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 4 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.
All as per item No 152.00 but 16 sq mm, 2 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.
All as per item No 147.00 but 6 Sqmm 2 Core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft/ loose soil complete all as specified ans as directed.
Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all complete all as specified ans as directed.
Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all complete all as specified ans as directed.
M&L for spread fine river sand in trenches complete all as specified ans as directed. NOTE: For measurement purpose, punned down thickness shall only be taken.
M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed
Material and labour for cutting of bituminious road/hard standing PCC path/wall up to a size not exceeding 20cm width and not exceeding 60cm in depth for laying of protection pipe for cable including making good the disturded road/hard standing by providing PCC (1:2:4) type B1, 40 mm grade crushed stone aggregate upto existing surface level or removing the any type of tiles carefully and refixing properly as per existing surfcae complete all as specified and as directed.
Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and as directed.
Supply & laying tubes 'light grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables of size 25 mm dia bore including taking out unsv GI tubing complete all as specified and as directed.
Supply & laying tubes 'light grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables of size 40 mm dia bore including taking out unsv GI tubing complete all as specified and as directed.
M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed. NOTE:- (i) The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 chamber, CI cover 10 m thick, funnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 389 of MES SSR Part-II. (ii) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. (iii) Test points shall be made of GI strip 32x6 mm bridge type mounted on insulators, where ever applicable.
Kalim sons
Rameshwar Prasad
SHRI MADAN SINGH
M/S MUNGA LAL PRASAD
SHRI HRIDAY NARAIN GIRI
PERFECT BUILDERS AND SUPPLIERS
VIHUTO YEPTHO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .