Construction of Compound wall at Koundampalayam Muthualvar padaippagam in Ward No.33, West Zone.

Earth work excavation in all kinds of soil including sand, silt, wet sand under water, black cotton, stiff black cotton, clay, hard stiff clay, hard red earth, murram, stoney earth, gravel and shale's etc. 0.014 cum. in volume including rough dressing and excepting all kinds of rock and boulders exceeding dumping the excavated materials away from work site manually within 50m initial lead and 2m initial lift as per the direction of Engineer-in-charge etc complete and as directed by the departmental officers.

Mechanical Piling using Augur boaring including fixing the Augur tool including water and labour charges size of bore 300mm dia etc complete and as directed by the departmental officers. (Pile foundation)

Plain Cement Concrete 1:4:8 (one cement, four sand and Eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted etc complete and as directed by the departmental officers.

Plain Cement Concrete 1:2:4, one part of cement, one and two parts of sand, four parts of 20 mm hard blue granite metal by volume, characteristic strength not less than 20 N/sqmm) machine mixed for all reinforced Cement Concrete works, including scaffolding, cost of all materials, machine mixing, vibrating, lifting, curing, labour charges for laying & finishing etc., but excluding the cost and fabrication of reinforcements and also excluding centering and formwork etc., complete complying with the relevant standard specifications at all leads inside the building.

Supplying, fabricating and placing in position Mild Steel/Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Supplying and erecting centering for sides and soffits including supports and strutting upto 3.29m high for plane surfaces such as Rectangular Columns, Top and bottom slabs of boxing, sill slabs, sunshades etc., in all floors using mild steel sheets of 90cm x 60cm and BG 10 stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over countrywood joists of size 10cm x 6.50cm spaced at about 90cm centre to centre and supported by Casuarina props of 10cm to 13cm dia spaced at 75cm centre to centre etc. complete as directed

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid).

Reinforced Cement Concrete 1:1.5:3 (one cement, one and half sand and three aggregate) using 20mm gauge hard broken granite stone jelly for all RCC items of work excluding centering, shuttering, and cost of reinforcement grill but including curing finishing etc., complete and also including fixing fixtures in RCC works wherever necessary etc complete and as directed by the departmental officers.

Fly ash Brick work in CM 1:5 (one cement & five sand) using size 9"X4 3/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification -

PLASTERING with cement mortar 1:5 (one cement and five sand) 12mm thickness in all walls etc., complying with standard specifications.

Supply Fabrication and fixing of Mild Steel grills for Gate including prime coat etc, complete and as directed by the departmental officers.

Supplying and Laying Hydraulic Pressed Paver Block Providing and laying of 63 mm thick high strength of Hydraulic Pressed Paver Block in size of minimum compressive strength of 40 N/mm2 In uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including leveling the base perpareation of pavers as sub base, stone dust cushion 150 mm thick laying out of pavement cut the pieces to fix the edge vibring the paversl sweeping transporting loading unloading of laying paver block as per the standard specifications

Providing 7 rows "Y" type barbed wire fencing over compound wall using "L" angle 50X50X6mm fixing 1.35m ht. 2.40m C/C C.C 1:3:6 mix using 20mm jellyas per direction of departmental officers instructions etc complete and as directed by the departmental officers.

Painting two coats of newly plasteredwall surfacewith readymixed Cementpaintof firstquality and of approved colour overa priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification. (SI.No.395)

Painting two coats ready mixed Enamal paint over the new iron works of approved quality and colour with out priming coat including the cost all materials etc., complete in all floors

Providing Name Board using Necessary "L" Angle M.S Flat and M.S Sheet b 18 gauge welding and joining etc., complete.