UDZRM/SECY/23/2025-26

Amount

Plaster (to wall, floor, ceiling etc.)with sand and cement mortar including rounding off corners and chamfering corners as directed and racking out including, throating, nosing and drip coarse, scafolding/ staging where necessary(Ground Floor) (Excluding cost of chipping over concrete surface.) i) gr. Floor (ii)(b)15mm th. Cement plaster(1:4)

Neat cement punning 1.5mm thick in wall dado window silt, floor, drqins etc. using cement @ 0.152M3/M2

Applying decorative Cement base paint ofapproved quantity after scraping the surfacethroughly as necessary as on plastered surfasce, ruled or concrete surface. Two coats

Applying exterior grade acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish / Acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacture's specification and as per direction of EIC. (b) two coats i) gr. Floor

Protective and decorative textured exterior high class matt finish paint of approved quality, composed of special Tharmoplastic Resin containing fine crystaline additives derived from granite as per manufacture's specification and as per direction of EIC to be applied over acrylic primer as required.( Two Coats ) i) gr. Floor

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand Papering. i) on steel

Painting with superior synthetic enamel paint of approved made and brand including smoothening the surface by sand paper. i) on steel

Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) In ground floor.

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all ecessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. ii) 110 dia

Labour for boring tube well of required dia bny water jet system through any type of soil strata including hire and labour charges for boring pipes, scafolding , tools and plants as necessary and taking out them and lowering pipes, stainers, blind pipes, etc. and fitting and fixing the same complete including bucket easing and other incidential works in this connection. The tube well should have a minimum 50 mm gap in between the outside of the tube well pipe and the bore. c)Depth up to 150mtr. i) 40 mm dia boring

Supplying PVC pipes & fittigs (medium duty) conforming to ASTMD - 1785 and threated to match GI Pipes as per IS 1239 (Part I) Strainer with brass net & jacket of approved quality. (heavy Type) i) 40 mm dia

Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specificatio i) 40 mm dia

Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets. i) 40 mm dia

Supplying, fitting and fixing chech valve (vertical) G.M. tested to 21 kg per sq. cm iii) 25 mm

Supplying, fitting & fixing Crompton SWJ100AT-36 PLUS Shallow Well Jet Residential Water Pump Self Priming 1 HP Single Phase including all taxes & incidental charges.

Supplying, fitting and fixing (a) (ii). Chromoum plated Bib Cock long body with wall flange (Equivalent to Code No 512 & Model Topical / Sumthing special of ESSCO or similar brand.

Supplying, fitting and fixing Chromoum plated angular Stop Cock with wall flange (Equivalent to Code No 5053 & Model Topical / Sumthing special of ESSCO or similar brand.

Supplying, fitting and fixing (ii) Chromium plated Concealed Stop Cock (Equivalent to Code No. 514(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand).

Supplying, fitting and fixing CP Pillar Cock - 15 mm. (Code No. 5011 & Model - FLORENTINE of JAQUAR or equivalent).

Supplying, fitting and fixing CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (Code No.5041 & Model - FLORENTINE of JAQUAR or similar brand).

Supplying, fitting and fixing iii) Nipple (150 mm long)

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. iii) 600 mm long

Renewing 32 mm N.P. waste fittings for wash basin including coupling C.P. chain and rubber plug.

Supplying,fitting and fixing Chromium plated overhead Rain shower (Square), size-180 x 180mm with revolving joint (Model Code No. F7010501 of CERA or equivalent)

Supplying, fitting and fixing C.P. Extension Pipe

Supplying, fitting and fixing Comode Shower

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) 20 mm

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) 25 mm

SUKAMAL GHOSH (BID ID -6841311)

Susanta Gobinda Deb (BID ID -6841190)