Construction of 1 No. of SFO and 12 Nos. of Firemen Quarters for Fire and Rescue Services Station at Chetpet in Thiruvannamalai District.

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.3 : Earth work excavation in Soft disintegrated rock (including refilling) a. 0 to 2 mt.

1.5 : Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

1.8 : Earth work excavation in SDR for open foundation (excluding refilling) a. 0 to 2 mt.

2.6: Supply and Filling of 40mm HBSJ

2.7: Supply and Filling of 20mm HBSJ

7.2 : Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1 : Filling with Excavated Earth

21.2 : Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3 : S&F of Magnetic door catches

24 : Manufacturing & supply of steel windows (Weight basis)

25 : M.S.Holdfast

30 : Ellispattern

31 : Weathering course

37.1 : White washing 3 coats (slaked)

39 : M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

46 : S & F 20 mm dia Alu. Hanger Rod

47 : S & F Alu Towel rail 75 cm long

48 : S & F 5 pin Coat stand

49 : S & F chromium plated 8 guage Picture Hook

50.4 : Providing Tree guard

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

52.1 : Supplying and fixing of 20mm dia "B" Class GI pipe for Hot water line (Fully Concealed in walls)

53.3 : C.I. Steps ( 5 kg)

Electrical arrangements 69 : 15 Amp. Power plug

72 : Box type Fibre Fan hook

74 : Charges for fixing of "Fan"

76 : 8 SWG wire

77.3 : S&F of TV/Telephone line Socket

77.4 : S&F of 20mm dia PVC pipe for TV/Telephone line

78 : Earthing Station IS3043 (Type I)

86 : Anti termite treatment

ANNEXURE-I 2.1.1 : Supplying and filling Gravel

2.1.3 : Filling crushed stone sand

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

3.3.1 : P.C.C. 1:8:16 using 20 mm broken brick jelly (using crushed stone sand)

3.8.1 : P.C.C. 1:4:8 using 40 mm HBGS Jelly (using crushed stone sand)

6.5.1 : Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand)

8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b) In Ground Floor / stilt floor

c) In First Floor.

d) In Second Floor.

e) In Third Floor.

f) In Fourth Floor.

9.5.1 : Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand) a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e. In Fourth Floor

10.5.1 : Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") 110 mm tk (B.P.) (using crushed stone sand) b. In Ground Floor

c. In First Floor

d. In Second Floor

e. In Third Floor

f. In Fourth Floor

11.5.1 : Brick Partition work in C.M. 1:4 Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") 70 mm tk (B.P.) (using crushed stone sand) a. In Ground floor

b. In First floor

c. In Second floor

d. In Third floor

12.1.1 : Brick partition work in C.M. 1:4 using country bricks of size 22 x11x5cm 50 mm thick (using crushed stone sand) a. In Ground floor

b. In First floor

c. In Second floor

d. In Third floor

14.1.1.I : Precast Cupboard slab 20 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Ground floor/Stilt floor

b. In First floor

c. In Second floor

d. In Third floor

14.1.1.II : Precast cupboard slab 40 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Foundation & basement

b. In Ground floor/Stilt floor

c. In First floor

d. In Second floor

e. In Third floor

16.1.1 : Precast Jally Ventilator 50mm thick.Using standardised M20 grade concrete Mix. (using crushed stone sand) a. In Ground Floor

b. In First Floor

c. In Second floor

d. In Third floor

e. In Fourth floor

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

d.For Vertical wall

f.For Curved surface

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

21.6.1 : R.C.C.Door frames of size 100 x 75mm with one edge grooves size 't' x 20 mm using standardised concrete mix M20 grade. (using crushed stone sand) a. 900 x 2100mm

22.3.3 : T.W. frame & T.W styles & rails with BWR double leaf shutters for Cup board/ward robes including two coat enamel paint & one coat primer.

23.1.1 : TW styles & rails with 9mm thick BWR single leaf shutters with brass screws a. 900 x 2100 mm

23.2.1 : 4mm thick pin headed Glass panels with Aluminium beedings

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

27.5.1 : B.W in CM 1:4 in Superstructure for OHT (using crushed stone sand) (b) In First floor

(e) In Fourth floor

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand)

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

31.2.1 : Finshing the top of Terrace floor with one course of solar reflective Ceramic tiles with base concrete

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand)

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand)

35.1.1 : Plastering in CM 1:3, 12mm with WPC (using crushed stone sand)

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand)

36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk. (using crushed stone sand) a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.4 : Two coat of cement paint over one coat white cement

38.6 : One coat white cement for new walls and other similar works.

38.7 : Plastic Emulsion PAINT including primer for outer walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.1 : Rain water harvesting using defunct borewell and providing perforated cover slab (M20) a). Providing pit

b) Augering 30cm dia

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.2.1 : Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150mm (using crushed stone sand)

50.3.1 : Supply and planting avenue trees (using crushed stone sand)

50.5.1 : Supplying. Fabricating and erection of M.S Scheme Name board (using crushed stone sand)

52.4 : 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

53.4 : S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5.2 : Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.1: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - In G.F.(using crushed stone sand)

56.4.1 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - Other than G.F.(using crushed stone sand)

57.1.2 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" Trap (using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4 : Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

58.5 : PVC (SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl

59.5.1 : Gully Trap using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand)

60.1 : PVC Nahani trap (4way/2way)

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

62.1.1 : PVC Specials as per IS 10124/1982 Part II a. 110 mm dia PVC bend

b. 160 mm dia PVC bend

62.2.2 : PVC Equal Tee as per BIS 7834/1975 a. 110 mm dia PVC Equal tee

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.

66.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.

71.2 : Supplying and fixing of 32 AMPS Triple pole main switch.

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.2.1 : S & F of 20 amps DP plug & Socket in sheet enclosure with 32 A DP MCB in flush wall with earth connection(For AC Plug)(Legrand (MDS)/Hager (L&T) equalivalent /superior variety

77.6 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

80.1: S & F of 450 x 375 x 20mm thick TW plank

87.1: Supplying and delivery of Three phase ELCB/RCCB

98.3.1 : TW panelled door shutter (with brass fittings) a. 1000 x 2100mm. (Single leaf)

105.1 : 4 x 4 Sq mm copper PVC insulated unsheathed single core cable for 3 phase EB service connection.

112.1 : S&F of 225 mm dia sweep AC exhaust fan

344.2 : S&F of Bevelled edge mirror 500 x 400 x 5.5mm

361.5.1: Vitrified Tiles flooring (ivory) (using crushed stone sand)

367: Providing wooden (melamine) polish for new wood

379.4.2.1: S&F of Granite tile of size 4'x2', 18 to 20mm thick for Kitchen arrangement (jet black) (using crushed stone sand) a.Ground floor

b. In First floor

c. In Second floor

d. In Third floor

383: S&F of Cuddapah sink 600 x 600 x 200mm

384: S&F of PVC flushing cistern

448.2: Supply and fixing 32mm dia PVC Tee with end cap

799 : Two coats of OBD over one coat white cement for inner walls

ANNEXURE-II: A1: Supplying and fixing of LED blubs suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9 watts LED bulb

b) 12 watts LED bulb for bulk head fittings

A2: Supplying and fixing of 18W LED TUBE LIGHTS 4' long with necessary fittings and charges for assembling and fixing

A3: Supply and fixing of LED Bulk head fitting for 12W LED Bulb

A4: Supplying and fixing of 25W LED Street light with necessary fittings (Superior variety) Charges for fixing 25W LED lamp street light fittings

A5: Supply, delivery and fixing of 150mm dia OD PVC casing pipe of 6kg/cm.Sq as per IS 12818/2010 of approved quality for borewells

A6: Supplying and fixing of 160mm dia PVC end cap for borewell bottom and top cover including all cost.

A7: Drilling of 6" dia (150mm) vertical bore well in Overburden soil including labour charges for insertion of casing pipe in the scheme area to required depth and as directed by the departmental officers .

A8: Drilling of 6" dia (150mm) vertical bore in hard rock areas anywhere in Tamil Nadu including transportation to the work site in hard rock areas and developing the borewells and as directed by the departmental officers.

A9: Supply and erection of 125 Amps capacity floor mounting panel board (Cubical type) of size 5.5' x 6.5' x 1' with bus bar chamber (Incoming: 3 nos. 300 A cut outs Bus capacity: 125 A 3 phase 4 wires copper flats for phases and neutral Outgoings: 8 nos. metering chamber)

A10: Supply and erection of 125 Amps capacity floor mounting panel board (Cubical type) of size 4.6' x 6.5' x 1' with bus bar chamber (Incoming: 3 nos. 300 A cut outs Bus capacity: 125 A 3 phase 4 wires copper flats for phases and neutral Outgoings: 4 nos. metering chamber)

A11: Supply and fixng of TNEB Moter Board suitable for 3 Phase 63A service connection made up of suitable angle iron frame work of size 1 1/2" x 1 1/2" x 1/4" rigidly fixed on wall

A12: Supplying and delivery of 3.5 core 70 Sq.mm PVC Aluminium armoured LTUG Cable with ISI mark (1100V) earth strip around the gland and cable termination with crimping of terminal with lugs etc., all complete in all respects and as directed by the departmental officers.

A13: Supplying and delivery of 3.5 core 50 Sq.mm PVC Aluminium armoured LTUG Cable with ISI mark (1100V) earth strip around the gland and cable termination with crimping of terminal with lugs etc., all complete in all respects and as directed by the departmental officers.

A14: Supplying and delivery of 3.5 core 25 Sq.mm PVC Aluminium armoured LTUG Cable with ISI mark (1100V) earth strip around the gland and cable termination with crimping of terminal with lugs etc., all complete in all respects and as directed by the departmental officers.

A15: Supplying and delivery of 4 core 10 Sq.mm PVC Aluminium armoured LTUG Cable with ISI mark (1100V) earth strip around the gland and cable termination with crimping of terminal with lugs etc., all complete in all respects and as directed by the departmental officers.

A16: Supplying and fixing of 3 Nos. of 200 Amps 500 volts grade porcelain fuse unit on suitable teakwood plank varnished to be fixed on the top of pole EB street pole with necessary clamps including cost of all materials etc., all complete and as directed by the departmental officers.

A17: Supplying and fixing of 3 Nos.of 63 amps 500 volts grade porcelain fuse unit on suitable teakwood plank varnished to be fixed on the top of pole EB street pole with necessary clamps including cost of all materials etc., all complete and as directed by the departmental officers.

A18: Supplying and delivery of following dia GI pipe "B" Class of best and approved quality having ISI mark including cost of coveyance and delivery at site of work etc., all complete and as directed by the departmental officers. (Above GL) a) 100mm dia GI Pipe 'B' Class

b) 50mm dia GI Pipe 'B' Class

A19: Supplying and delivery of following dia GI , GM , CI and MS SpecIals of best and approved quality having ISI mark including cost of specials and delivery at site of work etc., all complete and as directed by the departmental officers. a) 100mm dia GI Bend

b) 50mm dia GI Bend

A20: Labour charges for conveying and laying of UG cables in the cable trench including earth work and providing sand cushion with brick layers below ground level etc., complete for UG cable of size 4 to 25 Sq.mm and 2, 3, 3 1/2, 4 core with ISI Mark etc., all complete and as directed by the departmental officers.

A21: Labour Charges for conveying and fixing of UG Cable of Size of 4 to 25 Sq.mm and 2, 3, 3 1/2 , 4 core with necessary MS clamps and brass screws including cost of materials and redoing the dismantled portion in to the original position etc..., all complete and fixing of UG cables on walls and ceiling etc., all complete and as directed by the departmental officers.

A22: Supply and fixing of crimping lugs suitable for 6 to 70 Sq.mm,, PVC armoured LTUG Cable etc., all complete and as directed by the departmental officers. a) Lugs suitable for 70 Sq.mm UG Cable

b) Lugs suitable for 50 Sq.mm UG Cable

c) Lugs suitable for 25 Sq.mm UG Cable

d) Lugs suitable for 10 Sq.mm UG Cable

A23: Supply and fixing of cable gland suitable for PVC armoured LTUG Cable etc., all complete and as directed by the departmental officers. a) Cable gland suitable for 70 Sq.mm

b) Cable gland suitable for 50 Sq.mm

c) Cable gland suitable for 25 Sq.mm

d) Cable gland suitable for 10 Sq.mm

A24: Supplying and fixing of 110mm dia PVC pipe of 4 kg/cm2 with ISI mark including cost of material, conveyance to works site, labour for fixing etc., complete and as directed by the departmental officers.

A25: Supplying and fixing of 50mm dia PVC pipe of 4 kg/cm2 with ISI mark including cost of material, conveyance to works site, labour for fixing etc., complete and as directed by the departmental officers.

ASR CONSTRUCTIONS

Jagathesbabu