REHABILITATION AND REPAIR OF FLOOD LIGHTS, BOLLARD LIGHTS, POST TOP LANTERN LIGHTS, LANDSCAPE LIGHTS AND IMPROVEMENT / REPAIR OF SUMMER, WINTER APPLIANCES INCLUDING CONNECTED WORKS AT SUNJUWAN UNDER GE JAMMU

Amount

Labour for repair / servicing of ceiling fan of any capacity complete with strip opening the ceiling fan for repair / washing / varnishing and removing of old lubricating substances from bearing / bush by using Kerosene oil, carrying out fresh lubrication, greasing and to make the ceiling fan noise free and smooth functioning, including replacement of worn out / unserviceable minor spare parts split pin, fan body bolts, spring washer, fan rod bolt etc and PVC insulated, unsheathed stranded twin twisted copper conductor cable of size 1.5 Sqmm upto 1.0 m long, assembling the repaired ceiling fan and testing to the entire satisfication of Engineer-in-Charge and depositing in MES store yard complete all as specified and as directed. Note: - Replacement of spares flexible wire etc / rewinding of ceiling fan shall be measured and paid separately under respective item for material and labour cost.

Labour for repair / servicing of exhaust fan of any type and sweep complete with strip opening the exhaust fan for repair / washing / varnishing and removing of old lubricating substances from bearing / bush by using Kerosene oil, carrying out fresh lubrication, greasing and to make the exhaust fan noise free and smooth functioning, including replacement of worn out / unserviceable minor spare parts split pin, fan body bolts, spring washer, fan rod bolt etc and PVC insulated, unsheathed stranded twin twisted copper conductor cable of size 1.5 Sqmm upto 1.0 m long, assembling the repaired exhaust fan and testing to the entire satisfication of Engineer-in-Charge and depositing in MES store yard complete all as specified and as directed. Note: - Replacement of spares flexible wire etc / rewinding of exhaust fan shall be measured and paid separately under respective item for material and labour cost.

Rewinding of ceiling fan of any make / type and size (1200 sweep) with super enamelled copper wire of appropriate gauge as existing to obtain the specified and satisfactory RPM as per manufacturer's specification including replacement of all insulation materials, varnishing, heating, drying, assembling of stator / rotor, connection and testing complete all as specified and as directed.

Rewinding of exhaust fan of any make / type and sweep with super enamelled copper wire of appropriate gauge as existing to obtain the specified and satisfactory RPM as per manufacturer's specification including replacement of all insulation materials, varnishing, heating, drying, assembling of stator / rotor, connection and testing complete all as specified and as directed.

Labour for remetalling of worn out shaft of fan, cutting, bracing, machining and polishing to make the shaft suitable for fixing of new ball bearing and fixing ball bearing in replacement of bushing system in ceiling fan and assembling the same and testing to the entire satisfaction of Engineer-in-Charge to ensure smooth and noise free operation complete all as specified and as directed. Note: - Bearing shall be measured and paid separately.

Supply and fixing ball bearing of any size and type, suitable for any type / make / size of ceiling fan complete all as specified and as directed.

Supply and fixing ball bearing of any size and type, suitable for any type / make / size of exhaust fan complete all as specified and as directed.

Supply and fixing in replacement of capacitor 230 Volt AC 50 Hz, conforming to IS-1709 and rated capacity 2.5 MFD for ceilling fan, exhaust fan and wall mounted fan complete all as specified and as directed.

Supply and fixing in replacement of capacitor 230 Volt AC 50 Hz, conforming to IS-1709 and rated capacity 4.0 MFD for exhaust fan complete all as specified and as directed.

Supply and connection of PVC insulated, unsheathed multi stranded, three core twisted copper flexible cable of size 1.5 Sqmm as required complete all as specified and as directed.

Supply and fixing only bush of suitable size for exhaust fan of any type / size as per existing type complete all as specified and as directed.

Supply and fixing of PVC connector 4 way 6 Amps with connection screws, nuts complete all as specified and as directed.

Supply and fixing of galvanised iron / mild steel anodized bolts with anodized nuts, spring washers, split pin etc size 50 mm long 10 mm dia half threaded type with split pin hole complete all as specified and as directed.

Supply and fixing in replacement of mild steel clamp for down rod of suitable size including gromet / reel type rubber pad with bolts, nuts, split pin and washers suitable for housing ceiling fan complete all as specified and as directed.

Supply and fixing in replacement of ceiling fan down rod 12 mm dia and 30 / 45 cm long complete with mild steel clamp, rubber reel, split pin, nut, bolts etc. complete all as specified and as directed.

Cleaning of ceiling fan assembly of any type / size and carrying out two coats of spray painting with first quality synthetic enamelled paint of approved colour including writing of MES number in black paint complete all as specified and as directed.

Cleaning of exhaust fan assembly upto 450mm and carrying out two coats of spray painting with first quality synthetic enamelled paint of approved colour including writing of MES number in black paint complete all as specified and as directed.

Taking down and strip opening to geyser of any make and capacity 25 litres including disconnection of all water pipe connection and taking out water inlet / outlet assembly, removing glass wool, the inner tank, descaling the assembly and tank, detecting the leakage, welding / brazing the defective parts, repacking the glass wool and refixing the same after making it functional including replacement of worn out nuts, bolts, washers etc complete all as specified and as directed. Note: - Cost of material and labour for providing new items shall be measured under relevant items of Schedule 'A'.

Material and labour for replacement of water inlet and outlet geyser assembly of existing make as required at site with rubber gasket suitable for geyser of 25 litres capacity electric driven water storage heater with provision of housing for thermostat assembly, heating element fixing arrangement nuts, bolts and washers etc complete all as specified and as directed.

Material and labour for replacement thermostat, switch for electric water heater storage type of capacity 25 litre, 230 Volts of existing make of geyser complete all as specified and as directed.

Material and labour for replacement heating element with triangular base / round base, single phase, 230 Volt, capacity 2 KW of existing make complete all as specified and as directed.

Material and labour for replacement heating element with triangular / round base, single phase, 230 Volt, capacity 1.5 KW of existing make complete all as specified and as directed.

Material and labour for replacement pressure release valve conforming to relevant IS 15mm bore suitable for fixing with galvanised iron pipe / tubing 15mm bore complete all as specified and as directed.

Material and labour for replacement of heavy duty PVC connection (For Hot water) nylon threaded 450mm large (18") 15mm bore including brass nuts, rubber washers complete on both ends complete all as specified and as directed.

Material and labour for replacement of heavy duty PVC connection (For Cold water) nylon threaded 450mm large (18") 15mm bore including brass nuts, rubber washers complete on both ends complete all as specified and as directed.

Material and labour for replacement of indicator lamps round / rectangular type 230 Volt AC suitable for geyser of any capacity including providing electric connections complete all as specified and as directed.

Material and labour for replacement water storage inner tank of stainless steel heavy duty confirming to ISI 25 litres capacity geyser, with provision for fixing 15mm dia galvanized air release valve complete all as specified and as directed.

Supply and fixing in replacement MCB SPN 32 Amps, 240 Volts, rupturing capacity 10 KA, 'C' series complete all as specified and as directed.

Supply and fixing in replacement plug top 15 Amps, 3 pins complete all as specified and as directed.

Material and labour for replacement non return valve 15mm dia complete all as specified and as directed.

Material and labour for repair / maint to desert coolers complete with and including cleaning, scrapping / rubbing old rusted surface, filling cavities and painting with two coats of high quality aluminium paint over a coat of red oxide primer externally and black paint internally with synthetic enamelled paints complete with replacement of necessary nut, bolts, rubber pads for fan motors and writing MES No / unit name all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of desert cooler fan motor 90 watt,1400 RPM, 230 volt 50 Hz, single phase conforming to ISI complete with fan blade and capacitor of suitable size complete all as specified and as directed.

Supply and fixing in replacement of desert cooler submersible pumping set single phase 230 volt, 50 Hz of 0.25 to 1.0 HP conforming to ISI complete with lead all as specified and as directed.

Supply and fixing in replacement of desert cooler fan motor blade of existing size made out from mild steel having duty complete with key bolt all as specified and as directed.

Supply and fixing in replacement of desert cooler side opening cover made out from heavy duty mild steel sheet and matching with the existing desert cooler body size complete with Khas Khas pads set of three pieces complete all as specified and directed.

Supply and fixing in replacement cable PVC insulated and sheathed of size 1.5 Sqmm 3 core FRLS 230 volt, 50 Hz conforming to ISI all as specified and directed.

Supply and fixing in replacement cable PVC insulated and sheathed of size 2.5 Sqmm 3 core FRLS 230 volt, 50 Hz conforming to ISI all as specified and directed.

Supply and fixing in replacement of plug top 3 pin, 5 Amp, 230 Volt, 50 Hz complete all as specified and directed.

Supply and fixing in replacement of PVC accessories of capacitor 2.5 MFD for desert cooler fan motor, 230 volt, 50 Hz complete all as specified and as directed.

Supply and fixing in replacement of unserviceable Khas Khas / Glass wool for desert cooler set of three pieces complete all as specified and as directed.

Repair / Maint / Servicing to refrigerator / deep freezer / water coolers / AC's of any capacity and model by replacing capillary tubing, gas chargings, rectification of leakage in capillary tubing / Chiller plant / water tanks, condensing coils, repair to wiring, flushing / cleaning condensing / cooling coils / internal / external unit of split AC, greasing to blower motors, replacement of spare parts, fan belts and make refrigerator / deep freezer / water coolers / AC's in serviceable condition complete all as specified and directed by Engineer-in-Charge. Note: - Spare / Gas charging shall be paid separately.

Charges for fixing in replacement of unserviceable sealed seamless welding compressor unit company manufacturer of any capacity for AC's complete with initial filling / charging of refrigerant gas to meet the requirement complete with vibration rubber pads four numbers each nut, bolts etc and testing on full load all as specified and directed by Engineer-in-Charge. Notes: - (i) Spare parts shall be measured and paid separately under respective items. (ii) Contractor shall be responsible for all replacement of failed compressor and shall be accompanied by certificate from the original compressor to the effect that said compressor has been repaired at their authorised service center. Further, a warrenty of 12 month shall be provided on such replacement in writing.

Supply only sealed compressor unit seamless welding company manufacturer with filling of refrigerant gas conforming to ISI as under: -

For refrigerator 165 / 286 litre capacity

For refrigerator 290 / 320 litre capacity

For Deep freezer 100 / 200 litre capacity

For Deep freezer 300 / 400 litre capacity

For Water cooler 40 / 80 litre capacity

For Water cooler 60 / 120 litre capacity

Split / Window AC 1.5 Ton capacity

Split / Window AC 2.0 Ton capacity

Supply and fixing in replacement of unserviceable / burnt condensing fan motor 1 / 35 HP single phase 230 volt 50 Hz complete with blade, fan belts for water cooler of capacity 40 / 80 litre and 60 / 120 litre complete all as specified and as directed.

Supply only condensing fan motor 1 / 5 HP 1440 RPM single phase 230 Volt 50 Hz with double blade and shaft end with fan belts for windows AC / Split AC conforming to ISI of capacity 1.5 / 2.0 ton complete with vibration parts etc. complete all as specified and as directed.

Supply and charging refrigerant 134a / R-22 / 412 A in sealed compressor unit of refrigerator / deep freezer / water coolers / AC's of any type and capacity after flushing the complete system with carbon tetrachloride (CTC) and vacuumise the complete system with vacuum pump and testing on full load including replacement of filter, strainer complete all as specified and directed.

Supply and fixing in replacement of following spare parts for refrigerator / deep freezer / water coolers / AC's of any capacity: -

Starting relay

Overload protector

Thermostat switch

Defroz switch

Supply and fixing in replacement of following unserviceable spare parts of water cooler of any capacity: -

Starting capacitor 45 mfd

Running capacitor 60 / 120 mfd

Float valve PVC 15 mm dia with ball

Push cock chromium plated 15 mm with nipple 6'' long

Drain / Wash out flexible down pipe 40 mm dia

Water tank door gasket

Water drain tray of suitable size

Supply and fixing in replacement of unserviceable following spare parts of window / Split AC unit of capacity 1.5 to 2.0 ton: -

Starting capacitor 36 / 40 mfd

Running capacitor 100 / 120 mfd

PCB of Split AC

Front grill cover for window AC 1.5 Ton

Condensing fan motor double shaft

Supply and fixing in replacement of PVC flexible braided pipe of 20 mm dia for split AC water drain out all as specified and directed.

Dismantling and taking down old unserviceable flood lights and material and labour for new LED flood light fittings of 50 watt, system wattage and high pressure die cast aluminium housing with sealed toughened glass cover, silicon gasket for IP-66 protection suitable for pole mounting SMD LED array with lense, cool white 6500 K, system efficacy 90 lm/W, 240 Volts AC, 50 Hz, CRI>70% operating voltage range 160 V-270 V, Power factor>0.95, working temperature range - 20º C to 60º C, built in surge protection more than 10 KV with facility of power supply shall be removed without removing light fitting from pole including making proper connection complete including cutting, welding, drilling holes, nut, bolts, washer complete all as specified and as directed by Engineer-in-Charge.

Dismantling and taking down old unserviceable flood lights and material and labour for new LED flood light fittings of 70 watt, system wattage and high pressure die cast aluminium housing with sealed toughened glass cover, silicon gasket for IP-66 protection suitable for pole mounting SMD LED array with lense, cool white 6500 K, system efficacy 90 lm/W, 240 Volts AC, 50 Hz, CRI>70% operating voltage range 160 V-270 V, Power factor>0.95, working temperature range - 20º C to 60º C, built in surge protection more than 10 KV with facility of power supply shall be removed without removing light fitting from pole including making proper connection complete including cutting, welding, drilling holes, nut, bolts, washer complete all as specified and as directed by Engineer-in-Charge.

Dismantling and taking down old unserviceable flood lights and material and labour for new LED flood light fittings of 100 watt, system wattage and high pressure die cast aluminium housing with sealed toughened glass cover, silicon gasket for IP-66 protection suitable for pole mounting SMD LED array with lense, cool white 6500 K, system efficacy 90 lm/W, 240 Volts AC, 50 Hz, CRI>70% operating voltage range 160 V-270 V, Power factor>0.95, working temperature range - 20º C to 60º C, built in surge protection more than 10 KV with facility of power supply shall be removed without removing light fitting from pole including making proper connection complete including cutting, welding, drilling holes, nut, bolts, washer complete all as specified and as directed by Engineer-in-Charge.

Dismantling and taking down old unserviceable flood lights and material and labour for new LED flood light fittings of 150 watt, system wattage and high pressure die cast aluminium housing with sealed toughened glass cover, silicon gasket for IP-66 protection suitable for pole mounting SMD LED array with lense, cool white 6500 K, system efficacy 90 lm/W, 240 Volts AC, 50 Hz, CRI>70% operating voltage range 160 V-270 V, Power factor>0.95, working temperature range - 20º C to 60º C, built in surge protection more than 10 KV with facility of power supply shall be removed without removing light fitting from pole including making proper connection complete including cutting, welding, drilling holes, nut, bolts, washer complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement for fixing of LED bollard lights cylindrical type 8 / 9 watts long life aesthetically designed aluminium landscape luminaire for diffused lighting complete fixing on PCC base complete all as specified and as directed.

Supply and fixing in replacement black epoxy powder coated cone LED Bollard light with die cast aluminium housing, opal diffuser with in built LED 10 Watt CW, IP-65, height 600mm, 125mm dia on top complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement black epoxy powder coated contemporary UFO type LED Bollard light with die cast aluminium housing, opal diffuser with in built LED 10 Watt CW, IP-65, height 600mm, 125mm dia on top complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement black epoxy powder coated cubical type LED Bollard light with die cast aluminium housing with in built LED 12 Watt WW, IP-54 complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement for decorative post top lantern light for 360° indirect light with IP-65 protection, resistant to impact and corrosion. Glare-free and better uniformity model LPTO-40-CDL-M, Make : Crompton including fixing of the light on the existing pipe arrangement and necessary wiring to light from nearest junction box complete all as specified and as directed.

Supply and fixing in replacement gate / post top lantern fittings, Orbiss type, die cast aluminium housing, frosted polycarbonate diffuser, matt grey finish with inbuilt LED 12 Watt, WW, IP-54, 300 mm Ht, 248mm dia, testing on completion complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing in replacement gate / post top lantern fittings, Monaco type, decorative fixture die cast aluminium housing, transparent glass diffuser, black colour with LED bulb 12 Watt, WW, IP-54 testing on completion complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing in replacement gate / post top lantern fittings, Ruby clear type, decorative fixture spun aluminium housing, transparent glass diffuser, black colour with LED 25 Watt, WW, IP-65 testing on completion complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing in replacement gate / post top lantern fittings, Endura spring type, decorative fixture die cast aluminium housing, landscape IP-65 luminaire with high power COB LED as light source 35 watts testing on completion complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing in replacement LED Bush light fittings, 6 watts, CW, decorative fixture die cast aluminium housing toughened glass, landscape IP-66 luminaire testing on completion complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing in replacement LED Bush light fittings, 6 watts, WW, decorative fixture die cast aluminium housing toughened glass, landscape IP-66 luminaire testing on completion complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing in replacement LED Bush light fittings, 6 watts, Blue / Green / Pink / Orange, decorative fixture die cast aluminium housing toughened glass, landscape IP-66 luminaire testing on completion complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing in replacement LED spike light fittings, 6 watts, decorative fixture die cast aluminium housing toughened glass, landscape IP-66 luminaire testing on completion complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing in replacement LED ground burial light fittings, 6 watts, CW, decorative fixture die cast aluminium housing toughened glass, landscape IP-66 luminaire testing on completion complete all as specified and directed by the Engineer-in-Charge.

Material and labour for fixing in replacement galvanised iron tubing 50 mm bore light grade, on poles, on walls, under floors, road crossing, as required at site complete all as specified and directed by Engineer-in-Charge. Note: - Clamps, Nut bolts, saddle etc. will be measured and paid separately.

Material and labour for fixing in replacement galvanised iron tubing 40 mm bore light grade, on poles, on walls, under floors, road crossing, as required at site complete all as specified and directed by Engineer-in-Charge. Note: - Clamps, Nut bolts, saddle etc. will be measured and paid separately.

Material and labour for fixing in replacement galvanised iron tubing 25 mm bore light grade, on poles, on walls, under floors, road crossing, as required at site complete all as specified and directed by Engineer-in-Charge. Note: - Clamps, Nut bolts, saddle etc. will be measured and paid separately.

Material and labour for PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in pole foundation, stay pits etc including provision of necessary form work to achieve fair finishes surfaces complete all as specified and directed.

Supply and fixing in replacement of SMC pole mounted box of size 10" x 8" x 4" with hinged door including clamp, nuts, bolts and washers complete all as specified and directed and including taking down of old unserviceable junction boxes. The Box includes: - (a) MCB single pole 10 Amp, 10 KA 'C' series mounted on din rail - 1 No. (b) Connector block suitable for 1 phase.

Supply and fixing in replacement of SMC pole mounted box of size 6" x 4" x 4" with hinged door including clamp, nuts, bolts and washers complete all as specified and directed and including taking down of old unserviceable junction boxes. The Box includes: - (a) MCB single pole 6 Amp, 10 kA 'C' series mounted on din rail - 1 No. (b) Connector block suitable for 1 phase.

Material and labour in replacement of PVC insulated and sheathed cable of size 1.5 Sqmm 3 core copper conductor multistranded 1100 volt grade 230 volts running through and including PVC conduit of dia 20 mm with strip clamping complete all as specified and as directed by Engineer-in-Charge.

Material and labour in replacement of PVC insulated and sheathed cable of size 2.5 Sqmm 3 core copper conductor multistranded 1100 volt grade 230 volts running through and including PVC conduit of dia 20 mm with strip clamping complete all as specified and as directed by Engineer-in-Charge.

DARVESH ENGINEERING WORKS

M/S JIWANRISAM SERVICES PRIVATE LIMITED

Bidder Name

Sarbat Construction Co

DARVESH ENGINEERING WORKS

M/S JIWANRISAM SERVICES PRIVATE LIMITED