Loading
Loading…
Loading…
Tender Value
₹2.5 L
EMD Value
₹5,000
Closing Date
14 Aug 2026, 5:00 pm
Executive Engineer REW Kishtwar
HALL NO. 4 LOWER BLOCK MINI SECTT KISHTWAR O/O Exe
REFER BOQ
2026_RDPR_318724_9
70 of REW KISHTWAR 2026-27 Dated. 30 .07.2026
Open Tender
Civil Works
Percentage
KISHTWAR
Please refer Tender documents.
2 documents required · 2 mandatory
₹600
Rural Development and Panchayati Raj
₹5,000
Yes
30 Jul 2026
30 Jul 2026
17 Aug 2026
30 Jul 2026
14 Aug 2026
30 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: | - | cum | - | - |
| 2 | Random Rubble masonry with hard stone in foundation and plinth including levellingn1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) | 1 | cum | 1 | ₹1 |
| 3 | Providing hoisting and fixing trusses/purlins /rafters /posts/ post-plates or like components including cost of screws etc. complete First class Budloo/Fir wood | - | cum | 0.29 | - |
| 4 | Structural steel work in single section, fixed with or without connecting
plate, including cutting, hoisting, fixing in position and applying a priming
coat of approved steel primer all complete. | - | cum | 1 | - |
| 5 | "Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side ofthe sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | - | sqm | - | - |
| 6 | 12mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) | - | sqm | 1 | - |
| 7 | Carriage of sand +Agg 15km by MT and 3Km HL | - | cum | 1 | - |
| 8 | Carriage of stone and 1Km by HL | 1 | cum | - | - |
| 9 | P/F CIB | - | No. | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.01 MB
BOQ_1052101.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].