REPAIR TO ROADS, FOOTPATH, KERB STONE and ROAD FURNITURE IN SEKHON VIHAR AREA AT AF STN PALAM UNDER GE (AF) GURGAON NO.1

Amount

M &L for Repair to pot holes any depth , not exceeding 1 Sqm each including sweeping free from dust and mud , or water, scoring sunken surfaces in road, paths ets;cutting around edges to at least 25mm in depth , making good by applying tack coat at 5 Kg per 10 Sqm (using paving bitumen of grade VG-10) putting in premixed bituminous macadam using paving bitumen of grade VG-30) blinded with 0.09 Cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chipping), depth of pot holes exceeding 30mm complete all as specified and as directed by the Engineer in Charge.

M & L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed by Engineer in charge

M & L for applying evenly a priming/tack coat with bituminous primer (using paving bitumen of grade VG-10 @ 5 kg/10 Sqm surface complete all as specified and as directed by Engineer in charge

M &L for bituminous premixed semi dense asphalted concrete 30 mm consolidated thickness using paving bitumen of grade VG-30 with 5.5% binder content by weight of total mix, spread by means of self propelled mechanical spread/pavers rolled and compacted to required camber and gradient by using mechanical power road roller 8 to 10 ton capacity complete all as specified and as directed by Engr in charge

Supply and applying of hot applied thermoplastic road marking paint with asian paints APCOMARK retro reflective thermoplastic road marking materials conforming to MORTH-803.4 of 100mm wide & 2mm thick strips complete all as specified and as directed.

S & F in repair solar powered road stud (Cat eyes)of size 125x125mmx20-25mm thick(60mm shank) of self illuminating flashing type having 3 Nos LED's for Bidirectional studs (flashing and non flickery ) visibility minimum 1000 mm flashing rate 65-75 times per min with detachable NI-MH battery of 1-2 V to give backup at least 3-4 days from duly charged condition and it shoule be attached just before fixing and should not be accessible once installed made of robust aluminium die-cast housing with embossed edges for protection against billock cart iron wheels having reflection strip in addition to LED's stud form biomanchor water proof IP-65 as per IS-12063-1987 category 2 tested satisfactorily for minium 100 hours under rapid thermal cycling test as IEC 1215 between - 40 to + 80 degree centigrade weight minium 700 gram complete all as specified and directed by Engr -in - Charge.

S&F speed breakers/ bumps in black & yellow colour of size 750mm wide & height 100mm fixing with nails/ screws etc ,including taking down complete all as specified and as directed.

Schedule of Credit

R K GOEL ABHEY KUMAR JAIN

PAWAN KUMAR

BRIJ MOHAN LAL AND CO.

M/s Vijay Enterprises

M/S HARINDER SINGH

FUTURE ENGINEERING

M/S Parshant Associates