EE(E)-II/SNZ/MCD/26-27/TC-12/1

Supplying, Installation, Testing and Commissioning of PTZ (Pan, Tilt and Zoom) IP IR Camera having following specifications and features etc.: PTZ (Pan, Tilt and Zoom) IP IR Camera having following specifications and features etc.: 1. IP IR PTZ Camera: Motorized PAN TILT ZOOM with IR 2. Image Sensor: 1/2.8" or better progressive Scan CMOS 3. Signal System: PAL/NTSC 4. Minimum Illumination: 0.008 Lux @ F1.6, AGC ON, 0 Lux with IR, or better 5. Imaging: 1/1s to 1/30000s, Auto Gain Control, White Balance- Auto, Back Light Compensation, Image Rotation, Multi Zone Privacy Masking (Upto 24 Area), HLC, Defog, Region Of Interest and EIS features. 6. On Screen Display: Camera should display Camera title, Date & Time in live & recorded video both 7. Signal to Noise Ratio: > 50 dB 8. Event Notification: Through Relays, E-Mails or FTP 9. Day & Night: True Day & Night High Performance Mechanical IR cut filter with auto switch, IR Source Inbuilt IR LED's with effective distance. The camera should have IR LED's and cover distance up to 300 meter or above 10. Auto Tracking: The camera should be equipped with Deep-learning-based auto tracking function using simultaneously all of the panning, tilting and zooming should be available. When a motion is detected in a registered monitoring area, the camera should track the motion (object) and capture it. 11. Pre/Post Event Buffering: The camera should support atleast of 5 seconds of pre & post event buffering. 12. Presets: 300 Presets 13. Video Compression (Minimum): H.265 or better, H.264, Audio:- G.711U/A, G.711MU, G.726, AAC, G.723 14. Wide Dynamic Range: WDR (120dB or more), HLC & BLC 15. Digital Noise Reduction: DNR (2D+3D) On/Off 16. Image Setting: Rotate Mode, ROI, EIS, Defog, saturation, brightness, contrast, sharpness adjustable through client software or web browser 17. Profile Management: User configuration import, export.18) Cyber Security: Configuration encryption, AES 256-bit Encryption, Digest account lockout, video encryption, IP/MAC filtering, trusted boot, trusted upgrade, trusted execution. 19) Onboard Storage: Camera should support built in Micro SD/SDHC/SDXC Card slot upto 512 GB. It should be supplied with minimum 128GB Memory. 20) Recording Management: Format SD, overwrite, storage management, video to NAS device, remote archive access via FTP login. 21) Edge based Video Analytics & Alarm Trigger: Motion/tampering detection; network disconnect detection; IP conflict detection; memory card state detection; memory space detection; Tripwire, Intrusion, Object Abandon/Missing, SMD, Face Detection. 22) Network Protocol: SFTP, IPv6, IPv4, DNS, NTP, HTTP, HTTPS, SNMP, TCP/IP, PPPoE, NFS, ICMP, DHCP, SMTP, RTSP. 23) System Capability: ONVIF Profile S, G & T. CCTV Camera OEM should be full time member of ONVIF and quoted models should be listed on ONVIF official website (All the certifications & Credentials should be valid on the date of technical evaluation). 24) VMS: Camera shall support open source VMS. 25) Connectivity: 1x LAN RJ-45 (10/100Base-T). 26) Audio Support: Audio Interface - The camera should have 1/1 Audio In/Out to connect External Mic and Speaker. Audio Compression: PCM, G.711U/A, G.711MU, G.726, MPEG2-Layer2, G.722.1. 27) Alarm In/Out: Alarm In/out - 7/2 Ch In/Out. 28) Power Input: The camera should support simultaneous dual power input—DCI AC (via power adapter) and PoE (802.3af)—to ensure continuous operation in the event of a failure in one power source. 29) Power Requirement: 24 VDC, 2.5 A (± 25%), PoE+ (802.3at). 30) Enclosure & Weather Proof Standard: IP67 weather proof and IK10, TVS 8000V lightning proof, surge protection, voltage transient protection. 31) Operating Condition: Ambient Temperature: (-05°C to 50°C), humidity 95% (max) (non-condensing). 32) IR life: 40000 hours or higher. 33) Video Bit rate:32 KBPS - 8 MBPS or better. 34) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS. 2 MP IP IR motorized PTZ @ 25/30fps or better camera, Triple streaming, configurable on resolution Main stream: 1080p@25/30 fps Sub streams :1080p@25/30 fps & D1@25/30 fps or better, varifocal lens 4.3-137 mm or better with automatic & manual Focus Adjustment provisions, 32x Optical zoom and 12x Digital zoom with angle of view 57°-2.4°, PAN Travel: Pan: 0° - 360° endless, Manual Pan: 260° /s, Preset : 300° /s, Tilt Travel: Tilt: -20° to 90°, auto flip 180°, Manual Tilt: 120° /s, Preset : 200° /s.

Supplying, installation, Testing and commissioning of following capacity 8 port Layer 2 indoor Network Switch having features and specifications etc. as mentioned here under: Minimum 8 X RJ-45 Gigabit Ethernet Ports and additional 2 X 1G SFP Ports with non-blocking architecture by having Switching capacity of minimum 20Gbps and packet forwarding rate of 14Mpps or higher, 8K MAC table, Internal dual AC Power supply with operating temperature of -5°C to +50 °C. Jumbo frame: 10KB or higher, IGMP Snooping, IGMP snooping querier and support for IGMP Snooping Fast Leave, Should create 250 or more MLD groups, MLD Snooping, Per VLAN MLD Snooping C MLD Snooping Fast Leave, STP, RSTP, MSTP, Loopback detection, Multicast filtering, VLAN Tagging, QOS: 8 Queue per port, WRR, IPv4/IPv6 Interface : minimum 100 IPv4 static route entries and minimum 50 IPv6 static route entries, 700 Access Control entries, SSH CSSL for IPv4 and IPv6, 802.1x, ARP Spoofing, DHCP Snooping and server screening, IP+MAC+Port Binding, Per Port Bandwidth Control, 802.1X Authentication (Supports local/RADIUS database, Port-based Access Control and EAP, OTP, TLS, TTLS, PEAP Support) Cable Diagnostic feature, LLDP, LLDP-MED, SNTP/NTP, RMON, SNMP v1,v2c, v3 and SNMP Traps. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required.: 8 port PoE Layer 2 Network Switch with PoE Support of 130W or higher with each copper port supporting 802.3at PoE+.

SITC IP65 box (without PoE switches)of dimention 310mmX160mmX140 mm on pole or wall with suitable arrangement for support/installation of 8 port Giga PoE switch and 1 nos. 15/16 amp modular switch socket set

Fabrication, supply & erection of 5.0 mtr height, minimum 3 mm thick, bottom dia of 130 mm & top dia of 70mm, base plate of size 225 x 225 x 12 mm thick flange mounted hot dip galvanized octagonal pole made from HT steel plate, window with flash cover with full vertical window cover at appropriate height from the base plate on existing cement concrete pedestal as required. i/c supplylng and fixing of 6 mm thick laminated mounted sheet inside the window and i/c providing and welding 3 nos. Gl strips 4 mm thick of suitable length and having suitable size tapped holes as reqd, terminal block suitable for 25 sq mm conductor - 4 nos. & shorting links on DIN channel i/c providing and flxing DIN channel of suitable length, 6 Amp. SPMCB 'C' Curve characteristics, earth stud, cable support clamp suitable for upto 4x25 sqmm cable. Logo/Name of manufacturer shall be either embossed or Rivited plate on the pole Galvanization as per relevant IS code etc as required.

Providing and laying in position M25 grade reinforced cement concrete foundation of size 450 mm (L) ×450 mm wide and 1000 mm deep i/c excavation of earth, providing cutting, bending and placing in position, reinforcement of cold twisted bars of 12 mm dia- 960 mm long(approx)-8 nos. and reinforcement of cold twisted bars of 8 mm dia- 1400 mm (approx) -6 nos.(with 150 mm spacing) as required for positioning of 4 nos. foundation bolts 16 mm dia,600 mm long, J type i/c anchor plates of size 225mm×225mm×3mm and providing DWC HDPE for cable entry and exit as required for 3 m to 5 mtr pole.

Supplying, installation, Testing & Commissioning of following capacity at full load (Unity Power Factor) ON LINE Uninterrupted Power Supply (UPS) system suitable for Single Phase input, Single Phase output AC Supply. The UPS shall include a Rectifier, inverter, battery bank suitable for 30 minutes back up(Battery VAH capacity shall not be less than 1600 VAH per KVA of UPS rating per Hour backup time) on full load (Battery shall be VRLA, SMF in ABS Container) and Static Bypass switch along with provision for manual bypass, suitable isolation transformer for additional protection against neutral faults etc.The UPSsystems shall be Microprocessor based DigitalControl, using Insulated Gate Bipolar Transistor (IGBT)'s both for the rectifier & inverter with PWM (PulseWidth Modulation) Technology. The quality ofdesign,manufacturing and inspection process should confirm to the relevant Inter-national standards such as IEC/EN/VDE. The operating efficiency of the UPS systems shall be >95% at 100% non-linear loads.Current total harmonic distortion (THD)/ total demand distortion (TDD) on th input grid shall be < 5% at 100 %load. (The required LC filters shall be included in UPS cost), extreme power factor kit to be include to limit the input pf to 0.99 and output power factor shall be unity (i.e.kw rating of the UPS shall be kva rating x1)however UPS shall be suitable to take load at0.7 laging to 0.7 leading power factor loads. UPS shall be suitable for incoming supply AC single phase 160-270V 50 Hz and delivering output AC supply true sine wave single phase 220/230/240 Volt, 50 Hz +/- 0.2Hz, Overload capacity of 120% for 10 mins and 150% for 1 minute.Operating temperature 0 to 40 deg C, Relative humidity 0-95% noncondensing, noise level less than 60db at 1 meter distance, Protection for Under voltage, over voltage, abnormal output voltage, battery over charging,output over current, short circuit, battery deep discharge , 10 KV surge.Display for watt/VA,Amp and Voltage power parameters etc. UPS shall comply with low voltage electromagnetic compatibility (EMC) achieved asper EN 6204, EN6204 Part I and Part 2, it shall be a Voltage and Frequency Independent (VFI) type UPS (as per standard IEC 62040-1, 2&3.TheUPSshould be with IGBT Based Inverter Technology, Communication RS232/RS485/SNMP port open protocol for BMS integration as per approved by Engineering in charge.Required battery racks,DC breaker suitable rating.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath complete as required.

Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair should be complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2-D standard. Outer diameter should be in the range of 6.1mm nominal with Operating Temperature Range : -5° to +60°C, Bending Radius : < 4 X Cable Diameter at –5°C ± 1°C and Pulling Force : 11.5Kg etc. complete as required. 1 Run of Cable.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 &amp; 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.