SPECIAL REPAIRS REPLACEMENT OF MAIN MAST AT PARADE GROUND AT INS SHIVAJI LONAVLA

Amount

Dismantling of existing wooden mast with all Mild steel accessories including excavation and demolition upto below and above groundlevel.

Supply, install, testing & commissioning of 25mtr high main mast in RCC foundation of grade M-30 with complete specification all shown in drawing. Mast shaft shall be with four sections HOT DIP galvanized. The pole with bracket total shall be hot dip galvanized both inside and out side as per IS-2629 with minimum zinc coating of 610 GM/Sqm. Final coat including PU painting of Flag mast shaft with a coating of primer and PU paint. The anchoraging and accessories for high main mast by steel wire rope complete as per drawing and all as specified and directed.

Dismantling stone slabs and tiles of any description of any thickness in floors, walls all as specified and as directed

Demolition of Brickwork or stone/bou-lder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Demolition of cement concrete(unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level)

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in Cement mortar 1:6

M & L for rendering 15mm thick cement plaster (1:6) on fair faces of brick or concrete surfaces.

M&L for 25mm thick PCC 1:2:4, type B-0 (using 12.5mm graded aggregate) as in levelling course in floors

M&L for 20mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes

M&L for rendering 10mm thick in CM 1:4 as in backing coat in skirting

M &L for 20 to 25 mm thick machine cut, hand dressed white marble in floors over cement screed base laid and jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting and polishing etc complete.

M&L for granite (of any type) tiles 20mm thick machine cut in flooring,laid over cement screed bedded jointed with grey cement slurry and pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including grinding and polishing

M&L for granite (of any type) tiles 20mm thick machine cut in skirting/Dado and risers laid over cement screed and jointed with grey cement slurry and pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including grinding and polishing

Rounding and moulding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.

M & L for Hard core of broken stone of gauge n. exc 63mm deposited, spread & leveled in layers n.exc 15cm thick watered and rolled/rammed to a true surface all complete as directed by Engr-in-Charge.

M&L Moorum/Red bajiri filling in floors or pavings, laid in layers n.exc 15cm thick spread levelled and rammed including watering complete all as specified and directed.,

M & L for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate in subbase.

S&F Rolled mild steel section in compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates etc conforming of Fe-290 (gde-E-165)

M&L for Preparing new steel surface any description and applying two coat of synthetic enamel paint over a coat of red oxide primer complete. .

M&L for Mirror polish stainless steel special alloy grade 304, rectangular or tubular sections as in railing, balusters, handrail and panels incl required cutting, notching organ welding, riding and drilling counter sunk holes and bending to required shape by mechanical means as per site requirement without forming wrinkless and butting and including necessary fittings, brackets complete all as specified and as directed.

M & L for point wiring with 1.5 sq mm single core FRLS PVC insulated cable 1100 V grade with multistranded copper conductor drawn through PVC casing and capping with all accessories fixed to wall /roofs ceiling etc and incl provision of 1.5 sq mm PVC insulated and unsheathed copper conductor as earth continuity conductor and connected to common earth dolly incl fabricated steel terminal box made out of 1.6 mm thick MS sheet concealed in the wall with 3 mm thick laminated sheet top cover / PVC Switch Board mounted on wall for mounting the switches , socket outlets , fan regulators etc all as s specified and directed for One light/Fan point controlled by one switch.

All as per item No 22 but One 3 pin socket outlet 5 amp on the same board board with other switches.

S&F in repairs switch piano flush type single pole one way 5 amp.

S&F in repairs MCB SPN 35-63 amps, 240 Volts, Complete all as specified and directed.

S&F in repairs MCB SP 6 to 32 amps single pole 240 Volts, Complete all as specified and directed.

Supply and fixing sheet metal enclosure for DBs when MCB to be used single pole & neutral Double door 4 way without busbar,240V complete all as specified and directed.

Supply laying and testing cable XLPE insulated screened beded,galvanized steel trip or wire armoured, electric power cables (heavy duty) 1100 Volt grade wiyh stranded aluminium conductor of size 6 sq mm 2 core. Including taking down old unserviceable cable any size by dismantling of all electrical connection etc all as specified and as diercted.

Supply and fixing wiring for circuit/submain wiring alongwith earth wire in steel conduit size 2x1.5 sqmm with suitable clamp+1x1.5 sqmm earth wire sizes of FRLS PVC insulated (multistranded copper conductor single core cable in surface/ recessed as required complete all as specified. Note:Three run of copper conductor shall be measured as one unit (RM).

Supply and fixing LED aviation light in red colour ISI marked of capacity 230 Volt 40 watt bulb complete all as specified and directed by Engr-In-Charge.

Supply and fix Copper strip 20x3.15 mm complete with saddles and resin cast post insulators and fixing screws for roof /pole/down conductor including nut bolts & washers, threading and riveting for joints forsuitable size as required at site all as specified and directed by Engr -in- Charge. (i) Cost of revelling, nuts, chuk nuts and all fixing material shall deemed to be included in the item rate. (ii) Resin cast insulators are to be fixed at a interval of 75 cm (maximum.) complete all as specified and directed..

Supply and fix air termination single pointed aluminium rod 12mm dia and 300 mm long for fixing on aluminium strip duly suitable fixing arrangement, nut and chuck nut etc and making threading in one end of air termination rod all as specified and directed by engr-in-charge.

GI strip of size 32 mm x 6 mm as earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn through in pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 2mm dia galvanised iron or steel wire, complete all as specified.

M&L Earthing complete including taking down of old one with galvanised steel earth plate electrode of size 60cms x 60cms x 6.0 mm thick as per IS 3043 of 1987 buried directly in to the ground (earthpit not less than 2.25 m deep below the ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to the galvanised earth lead by means of bolts , nuts check nuts and washers of galnanised iron or steel using GI strip 32 x 6 mm as earthing lead as shown in electric plate No-3 of SSR- Part-1 connected to earth strip all as specifed or indicated including testing on completion and necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1 :3:6 type C-1 using 20 mm graded stone aggregate, pit, funnel, 15 mm diia meduim grade watering pipe, 40 mm dia GI light grade earth lead protection pipe, CI frame and cover , wire copper lugs etc mesh, charcoal and common salt in alternate layer complete all as specified and directed by Engineer In Charge. .

M&L for tubes medium grade galvanised with al fittings and fixed complete to walls, floors and roof of size 40mm dia complete all as specified.

M/S BHASKAR MANIKRAO PAWAR

Om Construction

M/s S.D Construction Co