T-18/CCD/2025-26

Attending minor type of repair for full day by engaging and supplying one suitable and experienced carpenter for carrying simple type of repairing of all wood work with all T&P etc. but excluding cost of material. (U.P.P.T.C.L. S.O.R.-2023,Ch.- 1, Item No. - 8)

Attending minor type of repair for full day by engaging and supplying one suitable and experienced plumber with kits for attending defects of water supply pipeline, cistern and fixtures with water supply defects within colony with all T&P etc. but excluding cost of material. (U.P.P.T.C.L. S.O.R.-2023,Ch.- 1, Item No. - 15)

Attending minor type of repair for full day by engaging and supplying one suitable and experienced mason with kits for attending defects of water supply pipeline, cistern and fixtures with water supply defects within colony with all T&P etc. but excluding cost of material. (U.P.P.T.C.L. S.O.R.-2023,Ch.- 1, Item No. - 6)

Attending minor type work like cleaning of roof terrace works and sun shades and other non-measurable miscellaneous works by engaging labour for full day including all T&P etc. complete. (U.P.P.T.C.L. S.O.R.-2023,Ch.- 1, Item No. - 7)

Excavation in foundation in ordinary soil (loam clay or sand) including lift up 1.5 M and lead upto 30 M and including filling, watering and ramming of excavated earth into the trenches or into the sides of foundation trenches as directed by the E/I for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 4.01)

Disposal of rubbish/debries out side the colony area as directed by E/I including cartage, labour material and T&P etc. for proper completion of the work.(U.P.P.T.C.L. S.O.R-2023.Item No.-20.16)

Earth filling under floors and or corporation area including cost of earth obtained with in 8 KM distance outside the corporation’s area and carriage including , loading/unloading, spreading, watering and ramming in 20 cm. layers and dressing of earth etc. Rates including cost of earth, labour, T&P and ROYALTY of earth etc. required for proper completion of work.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 4.10)

Cleaning of main drain or width more than 300 mm including disposal of waste refuses sludge outsidse the colony area including washing and cleaning by clean water completely (U.P.P.T.C.L. S.O.R.-2023,Item No.-20.14)

Cleaning of septic tank including disposal of waste out side the colony area as per the direction of the Engineer -in-charge includ ng cost of all labour ,T&P etc. required for completion of work(U.P.P.T.C.L. S.O.R.-2023,Item No.-20.12)

Same as in item No.20.12 above but for inspection chamber (U.P.P.T.C.L. S.O.R.-2023,Item No.-20.13)

C.C. with 20 mm gauge down graded stone ballast, coarse sand (F.M. 2.9 to 3.2) and cement in proportion 4:2:1 including supply of all material, labour, T&P etc. required for proper completion of work. .(U.P.P.T.C.L. S.O.R.-2023, Item No. - 5.06)

Precast cement concrete door sills, chaukhats, boundary posts, sheives and simllir Small work with cement, approved coarse sand(F.M. 2.9 to 3.2) and 20 mm guage down graded stone ballast in proprotion of 1:2:4 excluding supply of reinforcement and its bending but including its cutting, fixing and binding the same with 24 B.W.G. G.I. binging wire including the cost of binding wire, moulds and all other materials, labours and T&P etc. required for proper completion of the work(U.P.P.T.C.L. S.O.R.-2023, Item No. - 5.09)

RCC work with cement, approved coarse sand and 2 cm gauge graded approve hard stone ballast like granite, quarzite etc. from Dalla, Jhansi or other quarries in proportion 1:2:4 in lintels or bends and sun shade of door and windows excluding supply of reinforcement and its bending but including its cutting, fixing and binding the same with 24 BWG GI wire & including necessary centering & shuttering etc. required for proper completion of work, including supply of all materials, labour, T&P etc. reqd. for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 5.10)

1st class brick (not less than class 150) work in 1:6 cement & coarse sand of (2.90 to 3.2 FM) mortar in foundation and plinth including the supply of all material, labour and T&P etc for proper completion of work(U.P.P.T.C.L. S.O.R.-2023, Item No. - 6.01)

1st class brick work but in 1:6 cement & coarse sand of (2.90 to 3.2 FM) mortar super structure in one brick(230mm) or more thick wall.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 6.01+6.07)

1st class (not less than class 150) half brick work in 1:4 cement & coarse sand of (2.90 to 3.2 FM) mortar in super structure including the supply of all material, labour and T&P etc for proper completion of work (U.P.P.T.C.L. S.O.R.-2023, Item No. - 6.03+6.09)

S/F 35 mm thick Shisham/country/locally available wood part panelled and part glazed doors and windows shutter including S/F wooden cleats, stoppers & includung fixing and adjustment of hinges bolts, locks,handles, springs and/ or other fitting but exculding their supply and including fixing the glass panes with putty and necessary screws including all labour material T&P etc. required for the proper completion of the work.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 8.22)

S/F 35 mm thick fully panelled Shisham/country/locally available wood doors and windows shutter including S/F wooden cleats, stoppers & includung fixing and adjustment of hinges bolts, locks,handles, springs and/ or other fitting but exculding their supply including all labour material T&P etc. required for the proper completion of the work.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 8.23)

S/F 35 mm thick shishum/country/locally available wood door and window jali shutters with panes of heavy quality galvanized iron wire mesh of size 14x24 with necessary beading including fixing of wooden cleats and stoppers and including cost of all materials labour & T&P required for the proper completion of work.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 8.41)

Supply and fixing of 32 mm thick single leaf flush doors shutter (boiled water resistence,phenol maldehide resin bonded, hot pressed factory made) commercial quality conforming to I.S. 2202 part-1 (1983) including fixing of wooden cleats and stoppers and including cost of all materials labour & T&P required for the proper completion of work.including fixing of wooden cleats and stoppers and including cost of all materials labour & T&P required for the proper completion of work.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 8.54)

Supply and fixing of 32 mm thick double leaf flush doors shutter (boiled water resistence,phenol maldehide resin bonded, hot pressed factory made) commercial quality conforming to I.S. 2202 part-1 (1983) including fixing of wooden cleats and stoppers and including cost of all materials labour & T&P required for the proper completion of work.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 8.54+8.56)

M.S. work in heavy size large sections such as trusses, built-up gates, doors & windows frames , roof work, grill or railing, grating T/F rail etc. wrought to required form including supply of steel bolts,nuts,wastage etc. and their fixing charges, drilling holes, welding etc. required for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 9.01)

M.S.(T.M.T or TOR steel) work in plain work such as reinforced concrete or reinforced brick work (when not included in over all rates) wrought to required shape as necessary including cutting, bending etc. for proper completion of work and including supply of steel its wastage,bend, hooks and authorised overlapping as required for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 9.03)

Providing barbed iron wire fencing including fixing it to post after stretching it including cost of all labour, materials, T&P etc. required for proper completion of work excluding cost of posts. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 9.07)

Supplying and fixing of welded mesh size 75x25 and rectangular made out of 10 SWG over M.S. angle frame with M.S. flat with nut and bolts or welded as required including cost of drilling holes, bolts, nuts, washer welding etc. as required including cost of all labour, materials, T&P etc. required for proper completion of work excluding cost of angle iron and flat.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 9.22)

S/F galvanised mosquito proof jali (16x24 gauge) with M.S. flate of 20x3mm size , on both sides screwed of welded to window or door frame. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 9.18)

Supply and Painting of 85/25 grade bitumen paint over roof or on wall @ 1.70 Kg. Per sqm and spreading 6mm size grit over it @1cft/100 Sq.Ft. including sweeping, cleaning the roof with brush, heating the paint to required temperature and supply of all material, labour, T&P etc. complete (U.P.P.T.C.L. S.O.R.-2023, Item No. - 10.12)

12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand (1:4) minimum thickness not less than 10mm including cost of all material, labour, T&P etc. required for proper completion of the work . (U.P.P.T.C.L. S.O.R.-2023, Item No. - 11.07)

12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand (1:6) minimum thickness not less than 10mm including cost of all material, labour, T&P etc. required for proper completion of the work . (U.P.P.T.C.L. S.O.R.-2023, Item No. - 11.09)

12 mm thick plaster only for ceilling with 1:4 cement and coarse sand mortar minimum thickness not less than 10mm including cost of all material, labour, T&P etc. required for proper completion of the work.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 11.07 +11.10)

Rough cast finish to plaster of different mortar , add extra to the plaster item. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 11.11+Item No. -27)

20 mm thick plaster in dado or skirting in 1:2 cement and coarse sand mortar with 3mm floating coat of neat cement or marble dust in ratio 5:1 including supply of all material, labour, T&P etc. required for proper completion of the work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 11.13)

25 mm thick 1:2:4 plain C.C. floor laid in panels finished with 3 mm floating coat of neat cement, over base concrete. Rate includes cost of all materials, labour and T&P required for proper completion of work and excluding cost of base concrete. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 12.02)

40 mm thick 1:2:4 plain C.C. floor laid in panels finished with 3 mm floating coat of neat cement without base concrete including cost of all material labour and T&P etc. required for proper completion of the work.. (U.P

.P.T.C.L. S.O.R.-2023, Item No. - 12.04)

S/F 8 mm thick glazed floor tiles of Somany, Johnson or equivalent make , laid with 1:3 cement and approved coarse sand mortar and joints finished with white cement slurry ,jointing and polishing complete including supply of all materials, labour and T&P required for proper completion of work.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 12.11)

P/F glass strips of 3.15 mm thickness and 25 mm deep in joints of floor at the time of laying floors flush with floor level including supply of all labour, material, T&P etc. required for proper completion of the work..(U.P.P.T.C.L. S.O.R.-2023, Item No. - 12.13)

Providing and laying of 16 mm thick polished BARODA GREEN Stone of approved shade and pattern in floor or on top of Kitchen Slab etc. laid with 1:3 cement and coarse sand mortar (2.9 to 3.2 F.M.) and Jointing with white cement mixed with pigment to match the shade including supply of all materials, labour and T&P etc. required for proper completion or work. .(U.P.P.T.C.L. S.O.R.-2023, Item No. - 12.30)

Painting or varnishing new iron work or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mixed paint Luxol or equivalent brand or varnish including supply of all material, labour, T&P etc required for proper completion of work. Paint to be used should conform to the ISI no. 103 (1950). .(U.P.P.T.C.L. S.O.R.-2023, Item No. - 13.01)

Painting or varnishing but for every coat after first coat.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 13.02)

Painting or Varnishing on previously painted old wood or steel work, one coat of ready mixed priming paint and one coat of approved superior quality ready mixed paint asian/berger or equivalent brand or varnish including supply of all material, labour, T&P etc required for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 13.03)

One priming coat and one coat oil bound distemper on new work including supply of all material, labor and T&P etc. required for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 13.08)

One priming coat and one coat oil bound distemper on previously painted distemper surface but for every coat after first coat including supply of all material, labor and T&P etc. required for proper completion of work.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 13.10)

Finishing walls with water proof cement paint of approved quality like super snowcem or equivalent quality on new work with two coats to give an even shade including supply of all material, labour and T&P etc. required for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 13.17)

Finishing walls with water proof cement paint of approved quality like snowcem plus but for every coat after first coat.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 13.18)

Finishing walls with two coats of water proof cement paint of approved quality like snowcem plus but for every coat on previously old treated surface.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 13.19)

White washing one coat including supply of all material, labour, T&P etc. required for proper completion of work.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 14.01)

White washing two coat including supply of all material, labour, T&P etc. required for proper completion of work..(U.P.P.T.C.L. S.O.R.-2023, Item No. - 14.02)

White washing three coat including supply of all material, labour, T&P etc. required for proper completion of work..(U.P.P.T.C.L. S.O.R.-2023, Item No. - 14.03)

Colour washing one coat using approve colouring material and colour on newly plastered surface including sopply of all material, labour, T&P etc. required for proper completion of work.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 14.04)

For every coat after first coat of colour washed surface including cost of all material, labour, T&P etc. required for proper completion of work.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 14.05)

Repair of plaster in patches upto one sqm. area including removal of old plaster, cleaning the same thoroughly and racking out joints to 1 cm depth watering the area and then replastering with 1:4 cement and coarse sand mortar and disposal of rubbish outside corporation area including supply of all material, labour, T&P etc. required for proper completion of the work. ( Item No.-27)+ (U.P.P.T.C.L. S.O.R.-2023, Item No. - 20.02)

One coat of colour washing on old colour washed surface including cost of all material, labour, T&P etc. required for proper completion of work.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 14.06)

Repair to 25 mm thick 1:2:4 plain C.C. floor in patches with cement approved coarse sand and 20 mm gauge down graded approved stone grit adding concrete hardener of approved make in specified portion or as directed by E/I and disposal of rubbish outside corporation area including supply of all labour, material, T&P etc. proper complete.( Add 25% to the Item No.-36 )(U.P.P.T.C.L. S.O.R.-2023, Item No. - 20.03)

Supply and fixing of 4.8 to 5.7 mm thick glass panes with putty & brads of approved make and quality as per sample including supply of all material, labour T&P etc. required for proper completion of the work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 20.04)

P/F part of 35 mm thick Maleshian saal/Marandi wood door & windows shutter by replacement of top rail or panels or vertical members whatever required as per existing designs including detaching the shutter/ detoriated parts opening out & seperating the frame members & panels & oxidised iron fittings if required including reassembling the shutters in parts & again refixing the shutter. Rates are including the cost of all materials, labour & T&P etc. required for proper completion of the work. (only those parts replaced will be measured)(Ag. No.-16/EE/2023-24 Dt-29/02/2024, Item No.-61)

S/F 12 mm thick shuttering ply by replacing of panels including detaching the shutters, opening out and seperating the frame members and panels and including re-assembling the shutter in part and again refixing the shutter rates are including all cost of material, Labour, T&P etc. for proper completion of the work (Ag. No.-16/EE/2023-24 Dt-29/02/2024 Item No.-62)

Supply and Fixing new galvanized mosquito proof heavy quality iron wire mesh (16x24) gauge over door/window with country wood battens 8cmx1cm including S/F of necessary screws/nails and all material, labour T&P etc. required for proper completion of the work. (.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 8.45)

Providing and replacing of oxidized iron fittings of G.I Hinges 100 mm long of approved make and as per sample approved by E/I including cost of nuts,bolts and screw etc. complete.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 20.17(d))

Providing and replacing of oxidized iron fittings of M.S. Handles 100 mmsize of approved make and as per sample approved by E/I including cost of nuts,bolts and screw etc. complete. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 20.17(f))

Providing and replacing of 110 mm dia PVC pipe (6 Kg/sq.cm.) with special such as Tee, bend , socket, elbow ,clamp etc. including cost of all materials, Labour T&P etc required for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 26.17)

Providing and replacing of 110 mm dia PVC pipe (4 Kg/sq.cm.) with special such as Tee, bend , socket, elbow ,clamp etc. including cost of all materials,

Labour T&P etc required for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 26.18)

Providing and replacing of G.I. Reducing socket (20x15) mm size approved make and as per sample approved by E/I and including cost of all material, labour . (Ag. No.-16/EE/2023-24 Dt-29/02/2024, Item No.-74)

P/R of 15 mm dia G.I. Union of approved make and as per sample approved by E/I for repair of pipe lines including cost of all materials, labour and T&P etc. Required for proper completion of work. n (U.P.P.T.C.L. S.O.R.-2023, Item No. - 26.10(a))

P/R of 32 mm dia P.V.C. waste pipe of approved make and as per sample approved by E/I for wash hand basin/sink of standard pattern with check nut including cost of all materials, labour and T&P etc. Required for proper completion of work.(.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 27.14)

P/F first quality white glazed Orissa pattern W.C. Pan Hindustan , Cera make size 580mm without P trap including cost of all material, labour and T&P etc. for proper completion of work.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 27.01)

P/F 100 mm dia white glazed "P" or "S" trap including cement concrete and all all material, labour and T&P etc. for proper completion of work.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 27.23)

P/F of 15 mm dia. B-class (T.T./ Swastik make) ISI marked G.I. pipe complete with G.I. Specials such as bends tee, socket cross, clamps, etc. Earthwork including filling the trenches etc. required for proper completion of work. The rate also inculdes concealed G.I. fitting where required, cutting and making good the walls etc. including cost of all labour, materials, T&P etc complete. (Internal work).(U.P.P.T.C.L. S.O.R.-2023, Item No. - 26.01(a))

Hiring charges of welding machine for 8 hrs services in a day or part as per requirement for attending minoor type welding work as and where required as per direction of E/I .(Ag. No.-16/EE/2023-24 Dt-29/02/2024, Item No.-81)

Attending to petty maintenance services like plumbing services, mason services and carpenter sevices with one no. Plumber/ Mason/ Carpenter with one no. Helper per hour or part of an hour.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 22.18)

P/F of 20 mm dia. B-class (T.T./ Swastik make) ISI marked G.I. pipe complete with G.I. Specials such as bends tee, socket cross, clamps, etc. Earthwork including filling the trenches etc. required for proper completion of work. The rate also inculdes concealed G.I. fitting where required, cutting and making good the walls etc. including cost of all labour, materials, T&P etc complete. (Internal work).(U.P.P.T.C.L. S.O.R.-2023, Item No. - 26.01(b))

S/F 15 mm dia brass bib cock of approved quality (200 gms) with all labour, material & T&P complete.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 26.13(b))

P/F of 50 mm dia. B-class (T.T./ Swastik make) ISI marked G.I. pipe complete with G.I. Specials such as bends tee, socket cross, clamps, etc. Earthwork including filling the trenches etc. required for proper completion of work. The rate also inculdes concealed G.I. fitting where required, cutting and making good the walls etc. including cost of all labour, materials, T&P etc complete. (Internal work). (U.P.P.T.C.L. S.O.R.-2023, Item No. - 26.01(f))

Supply and fixing of CI/PVC bib cock 15 mm dia of approved quality including supply of all material, labour and T&P etc. requierd for proper completion of work.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 26.13(c))

Supply and Fixing PVC / PTMT pillar cock 15 mm size,125 mm long foam flow (120 gms) of approved make including supply of all material, labour and T&P etc. requierd for proper completion of work. (Ag. No.-16/EE/2023-24 Dated 29.02.2024,Item No.90)

S/F PVC ball float valve 15 mm dia with brass rod and union complete ISI marked including supply of all material, labour and T&P etc. for proper completion of work (U.P.P.T.C.L. S.O.R.-2023, Item No. - 26.06(a))

P/F PVC connection,300x15 with 2 brass units ISI mark heavy quality including supply of all material, labour and T&P etc. for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 26.09(a))

P/F PVC connection, 450x15 with 2 brass units ISI mark heavy quality including supply of all material, labour and T&P etc. for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 26.09(b))

Supply and fixing Syntex or equivalent make PVC water storage tank four layer of approved of desired capacity including all material, labour and T&P etc. required for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 26.12)

P/F 75mm dia SWR, PVC (Finolex or equivalent) pipe including cost of excavation , C.C. etc including its jointing and connection all materials, labour and T&P etc. required for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 27.29(a))

P/F 110 mm dia SWR, PVC (Finolex or equivalent) pipe including cost of excavation , C.C. etc including its jointing and connection all materials, labour and T&P etc. required for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 27.29(c))

Providing and fixing 450mm x 300mm wash hand basin of white glazed earthen ware 1st quality ISI marked size (Hindware/Cera or equivalent make ) including supply of all required materials, labour and T&P etc. required for proper completion of work and including cutting and making good the walls and floor with cement, coarse sand and grit. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 27.10)

Providing & fixing 610mmx450mmx200mm 100% stainless steel sink of approved quality with RS or CI brackets, 32 mm dia C.P. brass waste coupling, 32 mm PVC waste pipe etc. complete fitting including supply of all required material, labour & T&P etc. required for proper completion of the work and including cutting & making good the walls where required with cement sand & grit fitting used should be of superior quality. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 27.26)

P/F of plain edge looking mirror 5 mm thick glass Indian polished of size 600x450 mm of Atul make or equivalent as approved by the E/I with superior quality frame and hard board sheet on back of mirror with PVC cleats and brass screws and washers for fixing purpose including supply of all material, labour T&P etc. complete. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 27.15)

P/F low level 10 litre PVC Flushing cistern (Hindware or equivalent make) with all fittings including cost of all material, labour and T&P etc. for proper completion of work. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 27.12)

P/F in position 32 mm dia PVC flush pipe for low level PVC flushing cistern. (U.P.P.T.C.L. S.O.R.-2023, Item No. - 27.13)

P/F 32 mm dia PVC waste pipe of approved quality for wash basin or sink including supply of all material, labour and T&P etc. for proper completion of work.(U.P.P.T.C.L. S.O.R.-2023, Item No. - 27.14)

Applying two coat of Dr. Fixit pdilcrete URP with cement slurry of one part of Dr. Fixit pedicrete URP (covering area of URP-2.00 to 2.25qm/Kg) and 1.5 part of cement on llorizontal and vertical damp surface Before appllcation, clean the surface with wire brush of scrubber by using suitable solvent throughly saurated should not be accumulated at any place as per direction E/I including supply of all material, labour and T&P etc. required for proper completion of work. (Ag. No.-16/EE/2023-24 Dt-29/02/24, Item No.-103)