Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.0 LAccepted-AOC VILL CHOMON ADAMPUR JALANDHAR PUNJAB 144103 UDYAM PB 10 0011450 | JALANDHAR | PUNJAB | 144103 | L1 | Accepted-AOC L1 | |
| 2 | L2₹36.0 L+₹1.3 L (3.61%)Rejected-Finance NEAR RAILWAY CROSSING ADAMPUR DOABA JALANDHAR JALANDHAR PUNJAB 144103 | JALANDHAR | PUNJAB | 144103 | L2 | Rejected-Finance Other than lowest. | |
| 3 | L3₹36.1 L+₹1.3 L (3.71%)Rejected-Finance | L3 | Rejected-Finance Other than lowest. |
Tender Value
Refer Docs
EMD Value
₹70,000
Closing Date
30 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Adampur
Military Engineer Services AF Stn Adampur 144103
MISC REPAIRS TO CERTAIN BLDGS IN DOMESTIC AREA AT AF STN ADAMPUR.
2023_MES_601224_1
GE/AF/ADM-15/2023-24
Open Tender
Civil Works
Item Rate
180 days
Under GE AF Adampur
Refer NIT and Tender Documents
8 documents required · 8 mandatory
₹500
GE AF Adampur
₹70,000
Yes
26 Jul 2023
5 Jun 2023
1 Jul 2023
5 Jun 2023
30 Jun 2023
17 Jun 2023
6 Jun 2023 - 16 Jun 2023
Amount
Excavation in trenches in soft/loose soil not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth; for foundation, etc. and getting out complete, all as specified.
Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each, complete, all as specified.
Removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified.
PCC type E-2 (1:5:10), using 40 mm graded stone aggregates as in filling & mass concrete, sub base, complete all as specified.
Cement concrete, type B-0 (1:2:4), using 12.5 mm graded stone aggregates as in lintels up to 1.5 metre clear span, bed blocks, copings and the like including weathering, slightly rounded or chamfered angles & throating including provision of necessary formwork, complete all as specified.
Brick work using bricks as specified in PS-II clause 5.1, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified.
Brick work half brick thick wall using bricks as specified in PS-II clause 5.1, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:4), complete all as specified.
Cutting holes in brick walls exceeding half brick but not exceeding one brick built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4, including removal of rubbish outside MoD land, complete all as specified.
Factory made 35 mm thick ,2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);,etc complete all all as specified.
Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, thickness 30 mm,etc complete all all as specified.
Factory made solid PVC Door frame of size 50mm x 47mm made out of 5mm thick wood grain colour PVC sheet reinforced with mild steel square tube, suppling & fixing in opening, complete all as specified.
Factory made solid PVC moulded door shutters, 28-30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2 mm thick plain colur PVC sheet on back face with wood free EPS, as in cup boards & like, complete all as specified.
Aluminium anodised barrel tower bolt of extruded section 150mm long, ISI marked, complete all as specified.
Butt hinges, medium weight, cold rolled mild steel and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified.
Stainless steel butt hinges, 100 mm long, ISI marked, complete all as specified.
Aluminium, handle, 125 mm long, curve shapewith stainless steel screws, complete all as specified.
Aluminium alloy sliding door bolt with hasp and staple (bolt type) and fixing round type clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 250 mm long, IN REPAIRS, complete. MAKE: PRAYAG CAT NO. SLD-1210 or equivalent make mentioned in Appndix 'B'
Mild steel helical door spring 200mm, ordinary rat tail rod pattern including roller and roller plate ISI marked, complete all as specified.
Double leg aluminium anodised door stopper with rubber foot, ISI marked and fixed to bottom rail of doors with steel screws, IN REPAIRS, complete.
Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples all as specified.
Stainless steel conduit, not less than 20 mm bore, cut to size and erected in position as curtain rod on backets, including SS decorative finials & brackets fixed to walls with PVC rawl plugs & SS screws, IN REPAIRS, complete.
Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., confirming to Fe-290-Gde E-165, complete all as specified.
Framed mild steel work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290-Gde E-165, complete all as specified.
Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates quality confirming to grade Fe-290-Gde E-165, complete all as specified.
Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1979 grade St. 240 , complete all as specified.
Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.
Pre-painted galvalume aluminium zinc coating GI based plane steel sheet 0.50 mm of any colour hving tensile strength of 550 Mpa as in roof coverng/cladding to wall, fixed with self tapping screws comlete all as specified.
Factory made steel windows with side hung shutter with glazing bars each shutter having 02 No. box type hinges & two nos. tower bolts of size not less than 150 mm size and peg stays, dovetailed or welded, complete.
Factory made steel windows with side hung shutter without glazing bars each shutter having 02 No. box type hinges & two nos. tower bolts of size not less than 150 mm size and peg stays, dovetailed or welded, complete.
Steel windows or ventilators, fixed type complete. NOTES APPLICABLE TO SERIAL ITEM NO. 28 TO 30: Profile section used under these items shall be 'P' tube as shown in drawing No. CE/AF/STD-170/07, CE/AF/STD-171/07 and CE/AF/STD-172/07 as applicable.
Pressed steel frames made out mild steel sheet 1.25 mm thick, for doors with one or more rebates including necessary fixing lugs, 100 mm size medium grade mild steel hinges, lock strike plates etc including providing PCC (1:3 :6) type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified, size of frame: -
105 mm x 60 mm
125 mm x 60 mm
uPVC pipes, 160 mm external dia pipe, type-A, ISI marked (IS:13592) single socketed in any length with or without rubber ring joints, fixed to wall with PVC brackets as SWR / rain water pipes, IN REPAIRS, complete all as specified.
uPVC/PVC bends any radius, suitable for uPVC soil waste discharge pipes 160 mm external dia IN REPAIRS, complete all as specified.
Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including 6 mm dia. GI hangers (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and 40 mm long 12.5 mm dia expansion hold fasteners with and including 12 mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish IN REPLACEMENT including cutting holes for fixing ceiling light if any complete.
25 mm thick, cement concrete type B-0, 1:2:4 using 12.5 mm graded stone aggregate, finished rough, as in sub floors or similar locations, complete all as specified.
75 mm thick, cement concrete type C-1, 1:3:6 using 20 mm graded stone aggregate, finished even & smooth without using extra cement, as in plinth protection, and joints shall be sealed with joint sealing comound grade 'A' complete all as specified.
100 mm thick, cement concrete type D-2, 1:4:8 using 40 mm graded stone aggregate, finished even & rough, as in sub floors, complete all as specified.
Roughning surfaces of old concrete floor by picking, sweeping and washing down with water to remove dust etc including brushing neat cement slurry with 3 kg of cement per sqm
Machine cut kota stone slab flooring 15-18 mm thick over screed bed or bedding layer 20 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing & polishing complete
Machine cut kota stone slab 15-18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per above item including backing coat 10mm thick in CM 1:4 complete all as specified
Rounding of / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified.
Glazed ceramic coloured tiles 7-8 mm thick, area of each tile exc. 0.13 Sq.m but n. exc. 0.19 Sq.m on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified.
Non skid ceramic coloured tiles 7-8 mm thick (square/ rectangular) area of each tile exc. 0.11 Sq.m but n. exc. 0.18 Sq.m laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tile laid over and including 15 mm thick bedding layer in cement mortar (1:4) including necessary cutting and waste as per site requirement complete all as specified.
Non skid ceramic coloured tiles 7-8 mm thick (square/ rectangular) area of each tile exc. 0.18 Sq.m but n. exc. 0.38 Sq.m laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tile laid over and including 15 mm thick bedding layer in cement mortar (1:4) including necessary cutting and waste as per site requirement complete all as specified.
Non skid ceramic coloured tiles 7-8 mm thick (square/ rectangular) area of each tile exc. 0.18 Sq.m but n. exc. 0.38 Sq.m laid in skirting dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tile laid over and including 10 mm thick plaste in cement mortar (1:4) including necessary cutting and waste as per site requirement complete all as specified.
Factory made PCC type A-1 chequered tiles, 22-25 mm thick, of size 300 mm x 300 mm, ISI marked (IS:13801), with grey cement & no pigment, laid in floors, set and jointed with grey cement slurry, over & including 15 mm thick cement mortar (1:4) screed, complete, all as specified.
80 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of shape approved by GE, made by table vibratory method using PU mould, laid in required pattern over and including 25mm thick compacted bed of coarse sand, compacting through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete.
Rendering 5 mm thick on fair faces of brick work or concrete surfaces of ceiling, finished even and fair in cement mortar (1:3) complete all as specified.
Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:6) complete all as specified.
Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), mixed with water proofing compound as per manufacturers instructions, complete all as specified. Note: Supply only Water proofing compound will be measured and paid for separately under respective item of BoQ.
Supply only Water proofing compound, ISI marked complete all as specified.
One coats of interior acrylic distemper on old ceiling surfaces, including preparation of surfaces, complete all as specified.
Two coats of interior acrylic distemper on new ceiling surfaces, including preparation of surfaces, complete all as specified.
Prepration of new plasterd wall surfaces of any description complete all as specified and applying the following: - (a) Applying wall care putty, in two coats & smoothening the surfaces etc. as specified (preparatory to paint as directed). (b) Two coats of interior acrylic distemper over and including a coat of acrylic emulsion primer.
Complete removal of existing treatment from plastered wall surfces and preparation of the surfaces to the entire satisfaction of EIC and applying the following treatment: - (a) Applying wall care putty, in two coats & smoothening the surfaces etc. as specified (preparatory to paint as directed). (b) Two coats of interior acrylic distemper over and including a coat of acrylic emulsion primer.
Prepration of new plasterd wall surfaces of any description complete all as specified and applying the following: - (a) Applying wall care putty, in two coats & smoothening the surfaces as specified. (preparatory to paint as directed). (b) Two coats of exterior acrylic emulson over and including a coat of water based exterior primer.
Complete removal of existing treatment of any description, including prepration of wall surfaces of any description complete all as specified and applying the following: - (a) Applying wall care putty, in two coats & smoothening the surfaces as specified. (preparatory to paint as directed). (b) Two coats of exterior acrylic emulson over and including a coat of water based exterior primer.
Sheet glass 4mm thick ordinary quality and glazing with oil putty in squares n. exc. 0.5 Sq.m in each pane complete all as specified.
Figured glass pin head type 4 mm thick, and glazing with oil putty or wooden beads in squares n. exc. 0.5sqm in each pane complete all as specified.
Applying one coat (finishing coat) of synthetic enamel paint, including preparation of old painted wood and wood based surfaces of any description not other wise described over 10cm width or girth and complete all as specified.
Applying two coats of synthetic enamel paint over & including a coat of pink primer over new wood and wood based surfaces of any description not other wise described over 10cm width or girth including preparation of surfaces, complete all as specified.
Applying one coat (finishing coat) of synthetic enamel paint including peparation of old painted steel & iron surfaces of any description not other wise described over 10cm width or girth, complete all as specified.
Applying two coats of synthetic enamel paint over & including a coat of red oxide primer over new steel or iron surfaces of any description not other wise described over 10cm width or girth including preparation of surfaces, complete all as specified.
Disconnecting existing tanks of capacity exceeding 250 litre but not exceeding 500 litre, setting aside (or lowering if required) for cleaning/roof repair etc. and hoisting, reconnecting and re-fixing in position after necessary cleaning by removing all scale and dirt etc. including cleaning mouth of circulating service pipes complete, all as specified.
500 litre capacity, white, three layered polyethylene water storage tanks (cylindrical vertical with threaded lid) including hoisted and fixed in position, making connections, IN-REPLACEMENT, complete all as specified including the following acessories: - (i) PTMT ball valves, high pressure, with epoxy coated aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule and fixed, suitable for 20 mm bore GI pipe, IN-REPLACEMENT, complete all as specified. (iii) Gun-metal stop valve (quarter turn type) with MS lever handle, suitable for GI tubes 20 mm bore, ISI marked, screwed both ends , IN-REPLACEMENT, complete all as specified. (iv) Provn of 20 mm bore GI light grade tube from O/H tank to nearest mouth of RWP, IN-REPLACEMENT, complete all as specified.
Steel tubes ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors IN REPLACEMENT, of size: -
15mm bore
20mm bore
Angular stop valve/cock, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPLACEMENT, complete. MAKE: PRAYAG Cat No. 6510 or equivalent make mentioned in Appndix 'B'.
Concealed stop valve/cock, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPLACEMENT, complete. MAKE: PRAYAG Cat No. 6518 or equivalent make mentioned in Appndix 'B'.
Bib tap, cast copper alloy, chromium plated fancy type, long body with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPLACEMENT, complete. MAKE: PRAYAG Cat No. 6508 or equivalent make mentioned in Appndix 'B'.
Overhead ABS shower 125mm, with cast copper alloy chromium plated arm 225 mm long with flange and fixed in position, IN REPLACEMENT, complete. MAKE: PRAYAG Cat No. BS-76 or equivalent make mentioned in Appndix 'B'.
Corner glass shelf 300 mm size with brass brackets fixed to wall with SS screws and PVC rawl plugs, IN REPLACEMENT, complete. MAKE: PRAYAG Cat No. BEA-44 or equivalent make mentioned in Appndix 'B'.
Brass chromium plated towel rail 500 mm long, fixed to wall with SS screws and PVC rawl plugs, IN REPLACEMENT, complete. MAKE: PRAYAG Cat No. BA-10 or equivalent make mentioned in Appndix 'B'.
Stainless steel round slotted grating with frame, 100 mm size fixed in position with cement joints, IN REPLACEMENT, complete.
PVC connections 15 mm size of length 450 mm with PTMT nuts, IN REPLACEMENT, complete all as specified.
Health faucet CP brass body with wall hook and 1 metre SS tube, IN REPLACEMENT, complete. MAKE: PRAYAG Cat No. BEA-97 or equivalent make mentioned in Appndix 'B'.
Vitreous china wash down water closet pan (pedestal pattern), ISI marked, white with uPVC 'S' trap of size 540x365x390 mm, including seat cover and necessary SS Jet spray (L-bend) with 01 metre braded tube fixing acessories, IN REPAIR, complete. MAKE: PRAYAG Cat No. 4016 or equivalent make mentioned in Appndix 'B'.
Vitreous China squatting pan 'orissa' pattern, size 580 X440mm white, integral foot rests, including 'P' or 'S' trap and saintary connection socket to fit WC outlet including connection to trap , to flusing pipe, anti syphonage pipe etc complete including making good to floor, IN REPLACEMENT, complete all as specified. MAKE: PRAYAG or equivalent make mentioned in Appndix 'B'
Vitreous China urinal half stall type, white (including urinal spreader and waste pipe), IN REPLACEMENT,, complete all as specified. MAKE: PRAYAG or equivalent make mentioned in Appndix 'B'
PVC flushing cistern 10 litre capacity, syphonic action type, any shade, dual flush, ISI marked with flush pipe and all fixing acessories, IN REPLACEMENT, complete. MAKE: PRAYAG Cat No. 502 or equivalent make mentioned in Appndix 'B'
Vitreous China wash basin, white, flat back, size 550 x 400 mm, ISI marked, including fixing acessories like rag bolts etc. with CP waste coupling half or full threaded suitable for & including 32 mm size PVC solid waste pipe, IN REPLACEMENT,, complete all as specified. MAKE: PRAYAG Cat No. 4645 or equivalent make mentioned in Appndix 'B'
uPVC pipes, type-B, ISI marked (IS:13592) single socketed in any length with rubber ring joints, fixed under floors, / walls as SWR pipes, IN REPLACEMENT, complete all as specified of size: -
75 mm external dia pipe
110 mm external dia pipe
uPVC/PVC bend any radius, IN REPLACEMENT, complete all as specified, suitable for uPVC soil waste discharge pipes of size: -
75 mm external dia pipe
110 mm external dia pipe
uPVC/PVC vent cowl 75-110 mm external dia, IN REPLACEMENT, complete all as specified.
uPVC floor trap, IN REPLACEMENT, complete all as specified, suitable for uPVC soil waste discharge pipes of size: -
75 mm external dia pipe
110 mm external dia pipe
Concrete bed to drain pipes 150 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested; in Cement concrete 1:3:6 type C-2, complete all as specified.
uPVC pipes 160 mm external dia pipe , type-B, ISI marked (IS:13592) single socketed in any length with rubber ring joints, laid in trenchescomplete all as specified.
GI sheet with C & SS rectangular/ Square duct made out of 'L' shaped hollow profile, duly factory boxed, incl all accessories such as corner, cleat, carriage bolt, Gasket and propriate sealent on longitudinal joints etc complete of size 24 Gauge including assembly and errection complete all specified. Note :- The rate quoted by the contractor shall included upto height 8 metre from the ground level.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 sqm each and removing from site all as specified.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sq.m but not exceeding 4.00 Sq.m each and removing from site all as specified.
Taking down shutters of any description not exceeding 1.00 sqm each and removing from site all as specified.
Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and removing from site all as specified.
Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening after easing adjusting and minor repair complete all as specified.
Taking down cement plaster of any description on brick walls, ceiling or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding and remove the rubbish off the premises, complete all as specified.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar complete all as specified.
Demolition brickwork or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified.
Demolition of cement concrete (unreinforced) in ground floors and pavings not excceding 15cm thickness (above or below ground level) all as specified
Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided all as specified.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided all as specified.
Dismantling plain or corrugated steel sheets in roof coverings complete all as specified.
Dismantling wrought iron or mild steel work of any description, complete all as specified.
M/S GURBACHAN SINGH
PRATHAM TRADERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .