REPAIRS/MAINTENANCE TO DG SETS, AMF PANELS AND CONNECTED WORKS IN ARMY AREA AT UDAIPUR MIL STN

Amount

Maintenance & servicing of existing make and model DG set including tappet cover adjustment & gasket replacement of capacity 30 KVA-02 Nos, including replacement of following spares complete all as specified and directed. Note: Spares will be measured & paid separately under respective items here in after.

Supply only of Fuel Filter

Supply only of Lubricant oil filter

Supply only of Coupling

Supply only of Fan belt

Supply only of carbon bush

Supply only lubricant oil supply pipe

Air filter Element

Maintenance & servicing of existing make and model DG set including tappet cover adjustment & gasket replacement of capacity 50 KVA-02 Nos,75.00 KVA-01 Nos, 100KVA-01,200KVA-01including replacement of following spares complete all as specified and directed. Note: Spares will be measured & paid separately under respective items herein after.

Supply only of Fuel Filter

Supply only of Lubricant oil filter

Supply only Carbon Bush

Supply only Air Filter element

Supply only Radiator hose pipe set

Supply only Fan belt

Supply only LLOP Sensor

Material & Labour for taking out old U/S engine oil from DG Sets sumps, cleaning the sump throughly, supply & filling new engine oil complete of Make: Servo Super 20W40 of Indian Oil or Equivalent grade of Hindustan Petroleum as approved by AGE (I), complete all as specified and directed

Material & Labour for topping up of water coolant in radiator of DG set ,complete all as specifoed and as directed.

Material & Labour for dismantling of FIP for overhauling and calibration in authorised workshop including replacement of worn-out rings plungers, damper plate, gasket etc reassembling and testing complete all as specifed and as directed for following DG Set:

Repair/Overhauling of dynamo/charging alternator including replacement carbon, brushes holder, spring commutator/slip ring assembly bearing regulator of any make , type and capacity complete all as specified and as directed

Cleaning of the fuel tank of DG sets of following capacity after decaning the diesel, after through cleaning with kerosene oil including replacement of level indicator pipe complete all as specified and as directed:

Supply & Fixing in replacement of old U/S automatic voltage regulator suitable for DG set of following rating of approved Make & model by the AGE(I), complete all as specified and as directed

Material & Labour for replacement of old U/S fuel shutdown valve assembly complete testing including replacement of old unserviceable valves of any capacity DG set, complete all as specified and as directed.

Material & Labour for replacement of old U/S bendix assembly of self starter of capacity 30 KVA to 200KVA DG set complete all as specified and as directed

Material & Labour for replacement of old U/S existing make and model fly wheel ring including heating for press fitting for engine of DG set of capacity 30KVA to 200 KVA, complete all as specified and as directed.

Material & Labour for replacement of old U/S stop solenoid 30KVA to 200KVA DG Set complete all as specified and as directed

Supply & Fixing in repairs Electronic Controller in AMF Panel of DG Set capacity 50 KVA and making all necessary connection and programming to make functional of DG Set

Material & Labour for replacement of moulded rectifier unit on existing DG set of capacity 120 Ohms for alternator exciter unit complete all as specified and as directed

All as per item No.14.00 but of capacity 140Ohms

Material & Labour for replacement of SMPS based ElectronicBattery Charger suitable for 12/24 Volts battery charging system complete as specified and as directed.

Supply and replacement of old unserviceable battery 12Volts 80 AH maintenance free suitable for DG sets complete as specified and directed. Make-Amron

Supply and replacement of old unserviceable battery 12Volts 180 AH maintenance free suitable for DG sets complete as specified and directed.

Material & Labour for replacement of on load change over switch 4 pole, 415Volt, of capacity 63Amps, complete as specified and directed.

Supply & Fixing in replacement of old U/S following MCCB complete all as specified and as directed

MCCB 40 to 63A, 16KA 4Pole with thermal magnetic relay

MCCB 125A, 25KA 4Pole with thermal magnetic relay

MCCB 160A, 25KA 4Pole with thermal magnetic relay

Cutting unaxious green growth and wild grass by manual labour or by machine at Water supply Installation Premises, around Pole, along the boundary Fencing and at different electric installation locations etc. Removing rubbish from the Site of Work and deposting where directed not exc. 100 Metre from the starting Point, complete all as specified and as directed. NOTE : The Item shall be operated 3 times in the entire period of the Contract and the measurement will be taken one time for payment

Supply Aluminium ladder self supporting type , adjustable in two section , extended up to minimum 11 meter for working electrical work on PCC/Swaged type pole complete all as specified and directed by Engr-in-charge

Material & Labour for laying LT underground Cable, including takingdown existing u/s XLPE insulated, heavy duty armoured sheathed 1100 volts grade 95 Sq mm, 4core, with aluminium conductor, ISI marked as per IS : 7098(Part-1) complete with all as specified.

Material & Labour for sand cushioning to PVC/ XLPE cables with tibba sand and punning to provide required cover to UG cables.

Material and labour for stone slab ( patti) roughly hammer dressed stone 25 to 35 mm thick 25 to 30 cm wide and not less than 60 cm long laid dry and abutting each other with gap between adjacem,ent salb not exceeding 10 mm over underground cables for protection.

Excavating in trenchs, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out soft/loose soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm soft/loose soil.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

Disconnecting of electric main connections from the existing unserviceable motor control panel removing effected parts, cleaning complete to carryout various repair/replacement work and connecting up electically after repair work in and including providing new internal wiring within controll panel board for connecting up of connector/relay/voltmeter with suitable size twisted type PVC insulated complete with bottle neck lugs/thimble and new nuts & bolts if required connection shall be properly bunched, tied and dressed, ferrule markred for proper identification and shall be wrapped with PVC spring type tube near the door hinges complete all as directed by Engr-in-charge

naveen enterprises

AUTOMATION AND SWITCHGEAR PANELS

m/s sharma constructions