Renovation/Up-gradation of existing Auditorium (to be used as Multi-purpose Hall) of Gurugram University, SECTOR 51, Gurugram

Amount

CIVIL WORK - N.S ITEMS :- Providing and fixing of 95x22 mm second class Teak wood klin seasoned planks with tongue & groove joints. Teak wood planks to be of minimum length 750mm. The Teak wood planks to be fixed over two staggerd layers of 12 mm thick MR grade ply of approved make fixed to Sal wood frame work of 50 x50 mm and 50x50 mm at 600 mm centre to centre (HxV). The Sal wood shall be kiln seasoned and chemically treated. The framework to be jointed with mathani cut method. The framework to be supported on 100 x 100 x 8mm neoprene pads . The framework to be filled with 50 mm thick thermal bonded polyester wadding mikron fiber of 1000 gm/sqm mikron fiber. The stage floor to be PU polished with use of orbital sanders to make floor even before polishing. (Stage Flooring) Make - Greenlam, Century, Archid with the prior approval of engineer-in-charge. (N.S ITEM)

Supply and Installation of European Origin Heterogeneous Sports Vinyl Flooring 6 to 7mm Thickness with sheet width not less than 2.0 metre width jointed with seamless thermo welding laid with Suitable Premium adhesive @ 0.25kg/m2. The Product shall be Floor Score, FIBA, BWF & IHF Certified, its BWF Certification shall be of Grade‐1 (BWF International Elite). Product should have been installed in Top institute of India i.e. IIT, NIT or equivalent. Technical Standards of Product are as per following; Surface Finish :XPUR scuff‐resistant surface, Backing: Combined closed cell foam, Weight: 3.6 kg/m2 as per EN‐ISO‐23997 Standards, Roll Size: 2 Meter Width x 15 Meter Length ±1% with line marking. *FIBA ,IHF Certified. (Badminton court Flooring) Make - Tarkett . Ebaco , Ger flor with the prior approval of engineer-in-charge.

Providing and fixing of Wooden fire rated doors as per BS:476 Part- 20 & 22 & IS 3614 part-1 & part-2 for stability, integrity and thermal insulation. 03 Criteria Wooden door confirming to IS 277 with the following specification. Recommended fire door shall have doors tested at CBRI for maximum rating of 2hrs tested either with or without vision panel. Individual Test certificates should be available for glass used in vision lites confirming the required fire ratings.Any deviation in specification other than what is mentioned in the test certificates are not allowed. Proper label confirming the type of door and the hourly rating is mandatory. Approved manufacturer Navair International Ltd or equivalent subject to architect’s approval. And should be ISO Certified company.

Door leaf shall be minimum 50mm thick fully flush door with or without vision lite. 50mm thick shutter, comprising of 75mm x 44mm hardwood internal timber frame work, with infill of 48 kg/m3, ceramic fiber blankets, coated with VIPER FR intumuscent coating on both sides for insulation. The coated insulation shall be sandwiched between maximum 12mm thick HILUX Make Calcium Silicate Boards on both sides (edge to edge on internal Hardwood frame) having a maximum density of 900 Kgs/ Cum, cladded with 3mm ply commercial ply on both faces. (The same can be pasted with 1mm thick laminate (as per approved shade) or replaced with 4mm thick teak ply as per clients requirement at an extra cost) on both sides of the shutter, with 50mm x 10mm hard wood lipping all round the shutter. r. The rebate shall be of 20mm x 54mm in the Door Frame to accommodate the shutter . Both frame and shutter shall be fitted with intumescent Fire seal strips , The shutter fitted with 20x4mm Fire seal and Frame with 2 no. Fire seal of size 10x4mm on all the three sides of the except bottom. The pasting of the ply/veneer/laminate should be done using automatic machine and should be free from any nails or perforations. (Main Hall Doors) Make - Navair, Kutty with the prior approval of engineer-in-charge.

Supply and fixing the door frame will be made out of Hardwood of maximum section 120 x 70mm and coated with VIPER Fire reatrdent Primer. (Main Hall Doors) Make - Navair, Kutty with the prior approval of engineer-in-charge.

Supply and fixing SS Ball Bearing Hinges of size 100 x 75 x 3mm complet with SS Screws of BB1953 e ( 4 Nos per panel ) (Required For All Doors). Becker F.S -MS. Make - Navair, Kutty with the prior approval of engineer-in-charge.

Supply and fixing Panic Bar Double leaf panic exit devicesPEL 346 . (Required For Fire Staircase Location Doors Only). (Main Hall Doors) Becker F.S. Make - Navair, Kutty with the prior approval of engineer-in-charge.

Supply and fixing PEL905 Becker F.S. Make Panic Trim For Operation From The Other Side Of The Panic Bar. (Required For Fire Staircase Location Doors Only). Make - Navair, Kutty with the prior approval of engineer-in-charge..

Supply and fixing Mortise Dead Lock with 80mm cylinder body both side key DL7260 Becker F.S. Dead Lock (Required For Shaft Door Location). Make - Navair, Kutty with the prior approval of engineer-in-charge.

Supply and fixing SS D Type Pull Handle of size 300mm mm Long of PHD2230. Make - Navair, Kutty with the prior approval of engineer-in-charge.

Supply and fixing Door closers of BLC-604 (Required For All Fire Doors Except Shaft Door). Make - Becker F.S or equivalent with the prior approval of engineer-in-charge.

Supply and fixing Stainless Steel 304 grade 300mm Long Tower Bolt of with necessary screws as required Make - Becker F.S or equivalent with the prior approval of engineer-in-charge.

Supply and fixing Anchor fastners of of maximum 120mm length. Make - HILTI, FISHER or equivalent with the prior approval of engineer-in-charge.

Supply and fixing IS-1212 S88 UL 1784-01 Smoke tested adhesive seal Make Smoke seal batwing type on all side of frame. Make - LORIENT/ Becker FS / PEMKO with the prior approval of engineer-in-charge.

Supply and fixing 5 MM thick clear Non wire 2 Hr Fire Vision glass 300x300mm. Make - Saint gobain or Equivalent with the prior approval of engineer-in-charge.

Supply and Installation of Anutone Subtex Nubby,square edge, Glassfibre core fully encapsulated ceiling tile of size 595x595x15mm having volume density 120Kgs/m3, weight 1.8kg/m2 which is suspended by using 0.3mm thick Anutone Skelet TrelisT15 metal grid system.

Anutone Skelet TrelisT15 metal grid system of 600x600mm module includes Anutone Skelet WA15W30 wall angle with unequal flanges of 15/19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the Anutone Skelet MT15W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Anutone Skelet CT15W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally Anutone Skelet CT15W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15W12 CrossT in direction parallel to the Main T15 to result in 600x600mm module. Anutone Subtex Nubby square edge of size 595x595x15mm shall be placed into the grid size of 600x600mm. Ensure arrow marks behind the tiles are oriented in one direction to achieve uniform shade.(Hall False Ceiling). Make - Hera Design, Tectum, Anutone with the prior approval of engineer-in-charge.

Supply and Installation of Anutone Strand 2 , square edge, fabric wrapped pinewood fiber core panel of size 600x1200x15mm,volume density 400Kgs/m3, weight 6kg/m2 installed by using Anutone Strut framework system and Anutone Strut Z bar.

The Anutone Strut framework systems includes Anutone Strut CC50 Cross Channel having thickness 0.55mm, length 3600mm, knurled web 35, depth 50mm and equal flanges 15mm is fastened to wall positioned vertically in a regular manner at 600mm c/c. Anutone Strut Z bars having 40mm height, thickness 1mm is first fixed behind the panels by using suitable fasteners. Another length of Strut Z bars to be fastened perpendicular to Strut CC50 Cross Channel at spacing so as to match with that of Strut Z bar rear to panels. Strand 2 , square edge panels are then slided on to Strut Z bar fixed on Strut CC50 Cross Channel.

The system is backlined with the acoustical infill Anutone SynthPF 10x50.(Hall Wall Panelling). Make - Hera Design, Tectum, Anutone with the prior approval of engineer-in-charge.

Supply and Installation of Anutone Strand 2,square edge, magnesite-bonded pinewood fibre ceiling tile of size 595x595x15mm, volume density 400Kgs/m3, weight 6kg/m2 which is suspended by using 0.3mm thick Anutone Skelet Trelis T15 metal grid system.

Anutone Skelet Trelis T15 metal grid system of 600x600mm module includes Anutone Skelet WA15W30 wall angle with unequal flanges of 15/19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the Anutone Skelet MT15W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Anutone Skelet CT15W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally Anutone Skelet CT15W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15W12 CrossT in direction parallel to the Main T15 to result in 600x600mm module. Anutone Strand 2 Ebony of size 595x595x15mm shall be placed into the grid size of 600x600mm.

The system is backlined with the acoustical infill Anutone SynthPF 10x25. (Stage Ceiling) Make - Hera Design, Tectum, Anutone with the prior approval of engineer-in-charge.

Supply and Installation of Anutone Strand 2 Ebony, square edge Magnesite bonded pinewood fibre core tiles of size 600x1200x15, density 400 kgs/m3, weight 6kg/m2 installed by using Anutone Strut framework system

The Anutone Strut framework systems includes Anutone Strut CC50 Cross Channel having thickness 0.55mm, length 3600mm, knurled web 35, depth 50mm and equal flanges 15mm is fastened to wall positioned vertically in a regular manner at 600mm c/c. Strand 2 Ebony, square edge panels are then Screwed on to Anutone Strut CC50 Cross Channel.

The system is backlined with the acoustical infill Anutone SynthPF 10x50.(Stage Wall Panelling) Make - Hera Design, Tectum, Anutone with the prior approval of engineer-in-charge.

Providing and Fixing of Panelling on wall with BWP grade Ply of 12mm on MS Frame work. 25mmx50mm MS tube with composite panelling lined with 1mm thick Laminate panelled. Surface shall be in perfect plumb with wall and ceiling.(Hall Wall Panelling) Make - Greenlam, Century , Archid with the prior approval of engineer-in-charge. (N.S ITEM)

STAGE FURNISHING - N.S. ITEMS :- SITC of Main curtain motorised curtain control system with horizontal sliding arrangement complete with fixing, Rails, brackets, sliding arrangement & motorised operation complete with runners, master runners, pulleys 3-mm steel wire rope, 2HP motor(Compton) 2nos. Air breaker contactors (L&T) 2nos., micro switches for auto stop, 3nos push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed ,stiched in double gathering (Velvet coloth/mossy cloth) size 22'x56'. (Stage Furnishing) Make - Customised with the prior approval of engineer-in-charge.

SITC of Middle curtain motorised curtain control system with horizontal sliding arrangement complete with fixing, Rails, brackets, sliding arrangement & motorised operation complete with runners, master runners, pulleys 3-mm steel wire rope, 1HP motor(Compton) 2nos. Air breaker contactors (L&T) 2nos., micro switches for auto stop, 3nos push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed ,stitched in one & half gathering with cotton cloth(Size-22'x54'). (Stage Furnishing) Make - Customised with the prior approval of engineer-in-charge.

SITC of Back curtain motorised curtain control system with horizontal sliding arrangement complete with fixing, Rails, brackets, sliding arrangement & motorised operation complete with runners, master runners, pulleys 3-mm steel wire rope, 1HP motor(Compton) 2nos. Air breaker contactors (L&T) 2nos., micro switches for auto stop, 3nos push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed ,stitched in one & half gathering with black glazed cotton cloth(Size-22'x52'). (Stage Furnishing) Make - Customised with the prior approval of engineer-in-charge.

SITC of cloth wings made out of 50mm x 25mmx 16G pipe wielded frame and fix the black glaze cotton cloht on both side of wings . The wings panel should be hang from top with support of clamps. (5'x20'). Make - Customised with the prior approval of engineer-in-charge.

SITC of suitable size average frills made out from Black glazed cotton cloth duly stitched in double gathering with 28mm OD M.S.Pipe for hanging arrangement duly painted in black color. (Stage Furnishing) Make - Customised with the prior approval of engineer-in-charge.

SITC Cycloram screen frame made out from 32mm OD M.S.Pipe,50mm Pipe for back support duly painted in black colour with PVC Perforated Screen. (Size:- 20'x28'). (Stage Furnishing) Make - Customised with the prior approval of engineer-in-charge.

STAGE LIGHTING - N.S. ITEMS :- SITC of Indoor LED par 54 LED Par 200w, voltage-110v-250v/50-60HZ,lamp-TX high power LEDS; 3w x54 LED, 4 in 1 LED working position; any safe working position LED display,channel-4/5/7 CHS,Beam Angle-15/25/45/600 ,IP Grad-IP20,control mode- master/slave synchronization, DMX-512 control and auto matic run funcation,construcation-Aluminium and plastic body,silver,white and black optional(PLS-5403 Indoor). Make - PLS/CANARA/ETC with the prior approval of engineer-in-charge.

SITC of Spot Light 1000 watt with lamp , Clamp and 1 Meter Wire of Make - PLS/CANARA/ETC with the prior approval of engineer-in-charge.

SITC of 1000 Watt Fresnal light with Barndoor , lamp & Clamp. Make - PLS/CANARA/ETC with the prior approval of engineer-in-charge.

SITC of Par 64 1000 watt light with lamp & clamp. Make - PLS/CANARA/ETC with the prior approval of engineer-in-charge.

SITC of led Profile spot ULTRA BRIGHT Specification Voltage : AC90-240V, 50/60Hz Power Consumption : 200W LED : 200W Warm White / 2 in 1 / 4 in 1 Service Life : 60000 hours Lens Angle : 19/26/36° Optional Dimmer : 0-100% Linearly Adjustable Ambient Temperature : -25°C -+45°C Control Signal DMX512,Master-Salve, Sound, AutoControl Channel : 1/3CH (Single colour), 2/5CH (2in1)N.W 6 kg, G. WSKGDimensions : 450*280*mmPacking Size : 650*300*300mm(PLS-UBPL-200).Make - PLS/CANARA/ETC with the prior approval of engineer-in-charge.

SITC of 4 Way LED Blander white/warm white for General Lighting on stage. Make - PLS/CANARA/ETC with the prior approval of engineer-in-charge.

SITC of LED cyclorama light Light source : 18PCS 12W 4IN1 LEDs Lens angle : 25º(30º, 45º, 60º optional) Channel mode : 3 / 4 / 6 / 7 / 9DMX channel mode 0-100% linear dimmer Function: color mix, automatic color change, built-in program and strobe effect with adjustable speed Sound controlled via built-in microphone Adjustable sound sensitivity LED Display, easy to control Control : auto, sound active, DMX512, software(connect to computer) Overheating protection Voltage : 100-220V,50/60hz Power : 230W IP rating : IP20(PLS-18 x 4in 1). Make - PLS/CANARA/ETC with the prior approval of engineer-in-charge.

SITC of Digital Lighting Console with 1024 DMX channels• 1024 Channels. • 96 Fixtures. • 96 Dimmer Control Channels. • Time control of scenes: Fade in/out, LTP slope • Channels for each fixture 40 primary + 40 fine tune • LCD display with back light • 600 Scene step • 60 Scenes/Playbacks • 10 Scenes to run simultaneoulsy • Shape generato: Shapes of Dimmer, Pan/Tilt, RGB, CMY, Color, Gobo, Iris and Focus • Master slider - Global, playback, fixture • USB Memory - FAT32 supported (pls-Pearl 1024). Make - PLS/CANARA/ETC with the prior approval of engineer-in-charge.

SITC of Wall Mount Electronic Dimmer 4 Kw x 12 Chanel with DMX with Patch panel. Make - PLS/CANARA/ETC with the prior approval of engineer-in-charge.

SITC of 1.5sqmm 3 core shilded wire. Make - National/Incol/Polycab with the prior approval of engineer-in-charge.

SITC of Cable Tray 40 x100 x16swg painted.(Customised) of PLS/CANARA/ETC make or as per approved by engineer-in-charge.

SITC of Light socket box 4"x4" with 15 Amp multi socket Make - Anchor/Diamond with the prior approval of engineer-in-charge.

SITC of Side Light Ladder of 25mm x 50mm M.S.tube size (6'x2'). Make - PLS/CANARA/ETC with the prior approval of engineer-in-charge.

SITC of Cable Tray 40 x200 x16swg painted Make - PLS/CANARA/ETC with the prior approval of engineer-in-charge.

SITC of 48mm OD M.S for lighting grid & lighting bar to be hang from top with support of 40x40x5mm M.S.Angle duly painted in black colour. Make - Tata/Jindal/APL Apollo Tubes Ltd. with the prior approval of engineer-in-charge.

SITC of DMX Splitter 1 in 10 out The XLR connectors are mounted directly on the board.2. Connectors can be on the front or on the back. 3. Daisy chain of the input signal.4. Switch for DMX line termination.5. In 1 to 10 unit. Make - PLS/CANARA/ETC with the prior approval of engineer-in-charge.

Supply of DMX cable 20/0.12BC+PE1.8, for stage to control room Make - PLS/FBT/TASKER with the prior approval of engineer-in-charge.

SITC of MCB Box 24way MCB box made out from 16SWG MS sheet dully powder coated paint with 25 amp single phase MCB. Make - L&T/Havells/Anchor with the prior approval of engineer-in-charge.

SITC of DMX point box Make - PLS/CANARA/ETC with the prior approval of engineer-in-charge.

AUDIO VIDEO SYSTEM - N.S. ITEMS :- SITC of FBT Line Array (for LR) Compact Bass reflex Active line array - 2x10" + 2x1"- 600Wrms+300Wrms Class D amplifiers, 600W RMS to the LF, 300W RMS to the HF 2 x 10” woofers with 2.5" coil 2 x custom B&C HF compression drivers with 1" throats DSP on board with 8 preset 90° horizontal waveguide up to 18kHz Control panel with XLR «in&link», HF level, preset, HP filter, GND lift switch High SPL capability: 135dB Integrated rigging hardware Completely Manufactured in Italy. Make - FBT, JBL, TANNOY with the prior approval of engineer-in-charge.

SITC of Active subwoofer (For LCR) of Powered Base Speaker Configuration: 1 HYBRID BANDPASS way 18"Built-in amplifier LF/HF: 1200 W RMS Built-in amplifier peak LF/HF: 2400 W Frequency response: 33Hz-100Hz -6dB Low Frequency woofer: 1X18 - 3.5 coil - neodymium inch Maximum SPL cont/peak: 135/139 half-space dB Dispersion: Omnidirectional HxV Input impedance: 22 Kohm Crossover Frequency: preset dependant KHz AC Power requirements: 640 VA Input connector: XLR with loop Power cord: 5/ 16.4 m/ft Net Dimension (WxHxD): 652x500x750 / 25.66x 19.68x29.52 mm/inch Net Weight: 67/147.70 kg/lb. Make - FBT, JBL, TANNOY with the prior approval of engineer-in-charge.

SITC of Flying bar Indian main line array and Dealy with 1 ton chain pully. Make - FBT, JBL, TANNOY with the prior approval of engineer-in-charge.

SITC of Stage monitor 2-way bi-amplified bass-reflex design 15" coaxial custom woofer 1" exit throat B&C 700W + 200W RMS buil-in Class D power amplifier 90° conical dispersion DSP with 6 factory presets 0,59" birch plywood enclosure Wall bracket mount thread (optional) 1,38" top-hat Two integrated handles. Make - FBT, JBL, TANNOY with the prior approval of engineer-in-charge.

SITC of Speaker management system (FBT-DLM-26Supply and installation of Digital Mixer 24 recallable GB mic inputs with locking connectors and pantom power indicators •24 XLR analogue line outputs•4 Balanced 1/4" Jack mono line inputs•AES In and out•Word Clock•MIDI In and Out•HiQnet Ethernet port for HiQnet system integration and ViSi Remote System •64x64 ViSi Connect expansion slot (see back page)(Sound crafts-Si-Expersion-2/Allen Heath )/BSS/dbx). Make - FBT, JBL, TANNOY with the prior approval of engineer-in-charge.

SITC of Corded microphone.Make - FBT, JBL, TANNOY with the prior approval of engineer-in-charge.

SITC of Instrument Microphone. Make - FBT, JBL, TANNOY with the prior approval of engineer-in-charge.

SITC of Podium Microphone 18". Make - FBT, JBL, TANNOY with the prior approval of engineer-in-charge.

SITC of Hand C/L Microphone. Make - FBT, JBL, TANNOY with the prior approval of engineer-in-charge.

SITC of Microphone Stand Big(GS). Make - FBT, JBL, TANNOY with the prior approval of engineer-in-charge.

SITC of Microphone Stand Small(GS). Make - FBT, JBL, TANNOY with the prior approval of engineer-in-charge.

SITC of microphone cable from stage to control room for microphone points with conduit pipe etc. Make - FBT, JBL, TANNOY with the prior approval of engineer-in-charge.

SITC of Speaker 2.5sqmm x3core. Make - Polycab/Kalinga/Incoil with the prior approval of engineer-in-charge.

SITC of Signal cable. Make - Tasker/FBT/Belden with the prior approval of engineer-in-charge.

SITC of microphone connecting box made out from CRC sheet metal box duly powder coated paint,with 4 nos XLR panel mounting socket & phono socket having the facility to connect the 4 nos microphone channel. Make - FBT, JBL, TANNOY with the prior approval of engineer-in-charge.

SITC of Green Room Speaker. Make - FBT, JBL, TANNOY with the prior approval of engineer-in-charge.

SITC of Power Amplifier for Green Room Speakers Make - FBT, JBL, TANNOY with the prior approval of engineer-in-charge.

SITC of 1.5 mm x 2 Core Wire for speaker of Pi Make - Polycab/Kalinga/Incoil with the prior approval of engineer-in-charge.

SITC of Professional Head phone(German Meastro/Sennheiser) Make - FBT, JBL, TANNOY with the prior approval of engineer-in-charge.

ELECTRICAL WORKS- N.S.ITEMS:- LT Panel Supply, Receiving, storing, handling, loading & unloading, hoisting, erecting, including checking of all interconnections, testing & commissioning of the following cubical type panels made of 2.0 CRCA structure, base channe lSMC, doors & sheet metal partitions complete with, Moulded Case Circuit Breakers, meters, indicating lamps, current transformer, control MCB etc. Complete in all respects, insulated bus bars with heat shrinkable PVC sleeve, supported on FRP / SMC supports in suitable bus chambers, interconnection, small wiring, name plate, danger plate, earth bus etc. & comprising of compartments with hinged door for each feeder & its accessories, cable alley with hinged doors, bus chamber with bolted door etc. The panel being of dust & vermin proof construction with rubber gasket, attractively powder coated with Approved Paint shade. The panel shall be free standing type/ wall mounted type as per relavant drawing and comprising with foundation & Masonary works including ducting.

Breaking Capacity of all MCCB's are Ics Service Breaking Capacity.

MCCB's upto 250A shall be with Adjustable thermal-magnetic and above 250A Microprocessor based adjustable release.

All MCCB's shall be Front door operating handle, Phase Spreaders & Phase Barriers.

TPN MCCB Shall mean 3Pole MCCB with Adequate size of separate neutral link.

Metering CTs burden shall be 15VA & accuracy class 1.0.

CTs shall be "CAST RESIN" type .

All indication lights shall be LED type.

All meters shall be "DIGITAL" type.

Degree of Protection for Indoor panels shall be IP-55 with canopy and double for Outdoor Panels, cable entry from bottom only

Panel space heaters with control MCB & Thermostat, covered CFL lamp controlled by door switch for each panel bay.

Gland plates shall be 2mm thick for LT. Panels upto 400A Incomer & 3 mm thick for LT. Panel with 630A & above incomer.

Panel Manufacturer should have Type Test Certificates for Short Time withstand current test of 50KA for 1.0 Sec from CPRI Bhopal / Bangalore.

"ON" Indicating lamp shall be provided for all 3 phase MCCB out going feeders unless otherwise specified.

Control SP MCB's of 2 /4A Rating shall be provided for each metering circuit.

MDB - AUDITORIUM

Incoming

1 Nos. 320Amp FP, 25KA with Thermal magnetic based O/C, S/C, E/F relaese, both MCCB shall be electrically and mecahnically interlocked with each other.

Bus bars

One set of 400A TPN Alu. Bus Bar with PVC Sleeve in sealed bus chamber.

Metering & Indication

One set of R/Y/B phase indication Lamp & MCB.

1 No. Multi Function Meters (A/V/kW/kWh)

ON/OFF/TRIP indication lamp for incomer

Outgoing

1 Nos. 40A DP MCB (10 KA) 'D' Curve

5 Nos. 63A FP MCB (10 KA) 'C' Curve

1 Nos. 63A DP MCB (10 KA) 'C' Curve

1 Nos. 160A TP MCCB (25kA) with isolable neutral

1 Nos. 250A TP MCCB (25kA) with isolable neutral

25 x 6 mm Al. earth bus across the width of panel

Panel as mentioned above should be complete in all respect with internal wiring, al. bus bar etc as required complete in all respect with the prior approval of engineer-in-charge.

LIGHT FIXTURES & FAN

Supply ,recieving, storing, handling, double handling, trasnport to exact location, hoisting to required level, ,assembling, erecting, testing & commissioning luminaires basic channel, holder, LED driver (as per mentioned in item), starter, condenser, control gear box complete with decorative attachments, lamps etc.as per specifications and as per catalogue number giving below.

15W LED Slim profile surface mounted Led downlighter. Liminaire should be extruded/PDC housing of Aluminium, THD less then 10%. Make - Philips SMC251C LED7S-6500 PSU OR BGSLO SLEEK SURFACE 15W, WH & Usha DLP152123M with the prior approval of engineer-in-charge.

30LED Recessed type LED downlighter. Liminaire should be extruded/PDC housing of Aluminium, THD less then 10%. Make - Philips RS 271B LED 40/850 PSU-E MB-WH OR BAJAJ BCDLR 32WH / NW / WW & Usha TISVA Legend Plus COB downlighter with the prior approval of engineer-in-charge.

40W LED Tube light Philips Batten housing should be extruded aluminium with 50000hrs THD less then 10%. Make - Philips BN 100C LED40S - 6500 PSU OR BCLAB SP 44L LED CW PC SD with the prior approval of engineer-in-charge.

Ceiling Fan 1200 mm white color 2 Star , ISI Marked Specifications. Make - Havells - ES Plus, Usha, Orient, Crompton with the prior approval of engineer-in-charge.

Wall Fan 600 mm , Industrial Wall Air Circulator Fans. Make - Crompton, Almonard, Usha with the prior approval of engineer-in-charge.

5KVA UPS (For EM LIGHT / UPS POWER SOCKETS)

Design , manufacture, supply , receiving, loading, Unloading, storing , handling , testing & commissioning of 5KVA IGBT based ON line UPS (in-put Single phase and out-put three phase) with external extra Sealed maintenance free Batteries for 90 minutes backup with the following with all required assecories & Masonary works. Operating Environment 0 - 35 Deg C, operating relative Humidity 20 - 80%, operating Elevation 0 to 99.9 meters, Storage Temperature- 10 - 40Deg C, storage Elevation 0 - 9000 meters, Regulatory Approvals CE,ISO 14001/ 9001. Make -Fuji/Eton/Vertiv with the prior approval of engineer-in-charge.

FIRE DETECTION

CONTROL PANELS.

REPEATER PANEL.

Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required. Make -HONEYWELL- NOTIFIER/EATON/FIKE with the prior approval of engineer-in-charge.

DETECTORS

SITC of Beam detector complete as per site requirement with module and Power supply . Make- HONEYWELL- NOTIFIER/EATON/FIKE with the prior approval of engineer-in-charge.

RESPONSE INDICATORS:

Supply, installation, testing and commissioning of Response Indicators with Single LED. Make- HONEYWELL- NOTIFIER/EATON/FIKE with the prior approval of engineer-in-charge.

MANUAL CALL POINT

SITC of Intelligent Addressable Manual Pull Stations / Manual Call Points suitable for wall/column mounting. MCP shall have red coloured housing with molded, raised-letter operating instructions of contrast colour. The MCP shall latch mechanically upon operation and shall remain so until manually reset with its key by an authorized operator. The MCP shall have operating temperature range from 0°C to 50°C and humidity tolerance range up to 93% RH, Non-Condensing. (UL & ULC Listed and FM Approved). Make- HONEYWELL- NOTIFIER/EATON/FIKE with the prior approval of engineer-in-charge.

FAULT ISOLATOR

SITC of Intelligent Addressable, Supervised Short-Circuit Isolator. The Isolator Monitor Module shall have operating temperature range from 0°C to 49°C and a humidity tolerance of up to 90% RH, Non-Condensing. (UL & ULC Listed and FM Approved). Make- HONEYWELL- NOTIFIER/EATON/FIKE with the prior approval of engineer-in-charge.

Sounder

POWER SUPPLY

Supply, installation, testing & commissioning of 5A power supply which operates on 220 V 50 Hz power supply with 24 V DC supply with built in battery and battery charges for 2 hours backup. Power supply is for powering hooters/strobes. Make- HONEYWELL- NOTIFIER/EATON/FIKE with the prior approval of engineer-in-charge.

MODULES

SITC of Intelligent Addressable, Supervised Monitor Module monitoring Potential-free, Normally Open Dry Contact input. The Monitor Module shall have operating temperature range from 0°C to 70°C and a humidity tolerance of up to 93% RH, Non-Condensing. (UL & ULC Listed and FM Approved). Make - HONEYWELL- NOTIFIER/EATON/FIKE with the prior approval of engineer-in-charge.

SITC of Intelligent Addressable Potential-free, Form-C, SPDT contact based control module to trigger 3rd party utilities like Pressurization fan activation, Special notification activation etc. The contact shall be rated for 2A@24Vdc (Resistive) & 1A@24Vdc (Inductive). The control module shall have operating temperature range from 0°C to 49°C and a humidity tolerance of up to 93% RH, Non-Condensing. (UL & ULC Listed and FM Approved). Make - HONEYWELL- NOTIFIER/EATON/FIKE with the prior approval of engineer-in-charge.

CABLE

Supply and laying of 2 core 1.5 Sq mm stranded plain annealed copper conductor glass mica taped , XLPE insulated , LSZH inner sheathed , galvanised steel wire armoured and over all LSZH out sheatheated fire survival cable generally as per BS:7846:2009 including connections etc as required . The cable will be fixed on surface with suitable saddles at an interval of not more than one meter . Make - POLYCAB/RR KABLE/KEI with the prior approval of engineer-in-charge.

PA SYSTEM

SITC of Microprocessor based Voice Alarm System Controller & Router suitable for 6 zones having built in 240 W amplifier , Freq. response 60 to 18000 Hz, distortion <1%, S/N Ratio >75 having memory capacity 16MB flash ROM, Max messages 255. Controller shall be EVAC Compliant, and as per EN-54-16, EN608-49 ( and recording the Massages given by user department in required format in minimum three languages and store in ROM as per software required format.) Make- BOSCH/HONEYWELL/TOA with the prior approval of engineer-in-charge.

SITC of 19" rack mountable 480W Power Amplifier complete with LMT, control wires and other accessories. Make -BOSCH/HONEYWELL/TOA with the prior approval of engineer-in-charge.

SITC of the announcement console/call station with microphone suitable for 6 zones. The unit shall be suitable for expansion of at least 6 additional zones. Make - BOSCH/HONEYWELL/TOA with the prior approval of engineer-in-charge.

SITC of 6W Ceiling mounted speakers with built in 100/70v LMT, variable wattage tapping with required mounting accessories & hardware to mount in false /true ceiling. Make - BOSCH/HONEYWELL/TOA with the prior approval of engineer-in-charge.

SITC of 6 W Wall mountable speaker with built in 100/70v LMT, variable wattage tapping of 10/6/3/1.5 watts with required mounting accessories & hardware to mount on wall/ceiling / pole. Make - BOSCH/HONEYWELL/TOA with the prior approval of engineer-in-charge.

Supply and laying of 2 core 1.5 Sq mm stranded plain annealed copper conductor glass mica taped , XLPE insulated , LSZH inner sheathed , galvanised steel wire armoured and over all LSZH out sheatheated fire survival cable generally as per BS:7846:2009 including connections etc as required . The cable will be fixed on surface with suitable saddles at an interval of not more than one meter . Make - POLYCAB/RR KABLE / KEI with the prior approval of engineer-in-charge.

SITC 9 U, wall mounted type standard alluminium Rack with front Acrylic door and lock , rear door with lock , wired power and signal Channel duly powder coated. Make - DATA RAACK / OMNIOTECH / RITTAL with the prior approval of engineer-in-charge.

Supply, installation, testing & commissioning of IR indoor bullet type, 1/3" 4 MP ,progressive scan dual Streaming: H.265 smart codec, dual stream support, 2688 x 1520 resolution, Auto lens detection (2.7-13.5 mm) ,compatible with digital video recorder, PoE (802.3af) or 12 VDC support,UL/CE Listed,ONVIF conformant with IP 66 weather proof housing and 50 mtrs IR range. Make - Honeywell cat no. HBW4PER2 BOSCH/PELCO with the prior approval of engineer-in-charge.

Supply, installation, testing & commissioning of 16 channel network recorder with 320 Mbps incoming bandwidth , Builtin POE switch,8 SATA ports up to 64 TB with RAIDS 0/1/5/6/10 configuration, Two Monitor HDMI Out . four USB ports. Operating temperature +0°C to +50°C , Operating humidity <90% non-condensing. Make - Honeywell Cat No. HEN16304, BOSCH/PELCO with the prior approval of engineer-in-charge.

Supply, installation, testing & commissioning of 6TB Survillance Hard Disk Make - SEAGATE / WD / SAMSUNG with the prior approval of engineer-in-charge.

Supply , Installation , Testing and Commissioning of 16 port L2 web Managed switch having port density 16 Nos. of 10M/100M/1G RJ45 Port POE/POE+ ports , 2 Nos. of 1G/10G SFP Ports , 1X console port , Available POE power 370 W , 128 Gbps switching bandwidth , 16K MAC address support . Make - DLINK/CISCO/HP with the prior approval of engineer-in-charge.

Supply , Installation , Testing and commissioning of 18 U floor mount rack with fans , 2 cable managers , stationary shelf , 2 Nos of hardware pkts . Make- DATA RACK / OMNITECH / RITTAL with the prior approval of engineer-in-charge.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required. 4 Pair CAT6 Unshielded, Twisted Pair (U/UTP) Cable. Blue in colour conforming to the following standards like ANSI/TIA 568 C.2, EN50173, IEC 11801 2nd ED, 700Mhz etc. in Cat 6 U/UTP LCS2 cable with 23AWG . Make - DLINK/LEGRND/MOLEX with the prior approval of engineer-in-charge.

Supply , Installation , Testing and Commissioning of Full HD 32" LED Professional Display Panel. Make - SONY/LG/SAMSUNG with the prior approval of engineer-in-charge.

L.T. CABLES SUPPLY

Supply of the following 1100 Volts Alu/ Cu. Conductor, PVC insulated PVC sheathed, steel armoured/ unarmoured or XLPE cables as per IS-1554/ 7098 Part- I and as per standard specification. 3.50 core 240 sq.mm. Make - XLPE or Equivalent with the prior approval of engineer-in-charge.

FIRE PROTECTION SYSTEM-N.S.ITEMS:- Hydrants, Piping & Accessories Providing, laying, jointing, testing and commissioning of following sizes of pipes conforming to IS-1239 with all accessories like all fittings (for pipes upto 50mm dia threaded forged steel fittings and for pipes above 50 mm dia GI fitting with welded joint shall be used) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor/wall/ceiling with clamps, hangers (using anchor fastners) as per specification. Providing two coats of synthetic enamel paint of approved shade over two coats of primer. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Including painting of legends both direction arrow as per the approval of the Project Manager. GIpipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls / floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per Project Manager’s requirements including cutting holes and chases in brick, RCC work and making good the same to original conditions complete in all respects.

All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwise and the supply of the same shall also be included in rates under this head. Welding of any kind on the galvanized support / hanger shall not be permitted.

MS `C' Heavy class pipe. Make - Tata/Jindal Hisar/Prakash/Kirlosker/Electtro steel with the prior approval of engineer-in-charge.

25 mm dia

80 mm dia

100 mm dia

Providing and fixing forged brass ball valve with forged brass ball (suitable for test pressure of not less than 15 Kg / sqm of the following size including providing necessary union / flange. Make - NVRA/True Forged / DRPwith the prior approval of engineer-in-charge.

25 mm dia

Providing, fixing, testing & commissioning of butterfly valve (PN 20) (suitable for test pressure of 24 kg / sqcm) with flanges, nut bolts, gaskets, painting and necessary pad locking arrangement complete required. Make - Audco or equivalent with the prior approval of engineer-in-charge.

100 mm dia

Providing, fixing, testing and commissioning of Stainless Steel fire hydrant single landing valve with 80 NB flanged inlet, brass spindle controlled 63 mm dia female instantaneous outlet type. G.M coupling, blank cap, chain, twist release type lug & all accessories. Conforming to IS:5290. Including fixing with anchor fastner and flanged tapping from wet riser and providing pressure gauge with ball valve with all accessories, nuts, bolts, gaskets, painting complete as required. Make - Newage Mumbai/Minimax/Monsher with the prior approval of engineer-in-charge.

Providing, fixing, testing & commissioning of swinging type First Aid hose reel in red colour drum with 36.5 mts. long and 20 mm dia heavy duty rubber water hose, 20 mm dia Ball valve stop cock, terminating with G.M coupling & nozzle of 6mm outlet with shut off valve confirming to IS 8090 - 1976 complete with MS socket for tap-off, drum and brackets (including painting) for fixing on wall with anchor fastner, bolts & nuts conforming to IS:884-1969 complete as required. Make - Zoloto/IBP/Arco with the prior approval of engineer-in-charge.

Providing, fixing, testing & commissioning of perlocating, rubber reinforced lined fire hose pipe (as per IS : 636, Type B) of 63 mm dia and length as described below. The hose shall be rated for brust pressure of 35.7 Kg/sqcm. Hose shall be complete with ISI marked brass male & female coupling (IS:903) bound & rivetted to hose pipe with copper rivets & 1.5 mm copper wire. (Internal fire hydrant). Make - Newage mumbai/ Minimax/Safex with the prior approval of engineer-in-charge.

Providing, fixing, testing & commissioning of 63 mm dia instantaneous pattern branch short stainless steel pipe, 19 mm dia nozzle conforming to IS 903, suitable for inter connection to hose pipe coupling complete as required. Make - Newage mumbai/minimax/Safex with the prior approval of engineer-in-charge.

Providing, fixing, testing & commissioning of standard firemans axe with heavy rubber handle. Make - Custome made with the prior approval of engineer-in-charge.

Providing, fixing, testing & commissioning of dial type (100 mm) pressure gauge with isolation ball valve suitable for working pressure of 250 PSI with no Syphon. Cost shall be inclusive of providing any short pieces, nipples, elbows etc as required. Make - H-Guru/Fibig/Emrald with the prior approval of engineer-in-charge.

Providing, fixing, testing & commissioning of indoor type hose lockable cabinet frames fabricated from 40 x 40 x 5 angle iron sections and 16 gauge MS sheet with full front glass door and locking arrangement, suitable to accommodate landing valves, 15 m long hoses, first-aid hose reel and branch pipe nozzle & fire mans’ axe. The cabinet frame shall be painted with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade, as required (Approx 2.1 m (high) x 0.9 m (wide). The item shall be complete of MS housing with front door. Make - Cease Fire or equivalent with the prior approval of engineer-in-charge.

Portable Chemical Fire Extinguishers

Supply, installation, testing and commissioning of following types of extinguisher with provision of wall bracket (fixed with anchor fastner). Make - Minimx/Kanex/Fire Mech with the prior approval of engineer-in-charge.

Providing & fixing ISI marked (IS:15683:2006) portable CO2 type fire extinguisher type 4.5 kg capacity. Including valve, discharge hose of not less than 10 mm dia & 1 M long complete in all respects including initial filled with CO2 gas confirming to IS:307-1966 & filled to a filling rate of not more than 0.667 and wall suspension bracket. Make - Cease Fire or equivalent with the prior approval of engineer-in-charge.

Providing & fixing of ABC Type, Portable Fire Extinguisher, dry powder type (Gas Cartridge) conforming to IS: 15683 : 2006 with cylinder initially fully charged with dry powder, ISI marked confirming to IS:15683 : 2006 complete with standard discharge valve with tube, CI bracket for wall mounting. Make - Cease Fire or equivalent with the prior approval of engineer-in-charge.

SPRINKLER, PIPING & ACCESSORIES

Providing, laying, jointing, testing and commissioning of following sizes of pipes conforming to IS-1239 with all accessories like all fittings (for pipes upto 50mm dia threaded forged steel fittings and for pipes above 50 mm dia GI fitting with welded joint shall be used) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor/wall/ceiling with clamps, hangers (using anchor fastners) as per specification. Providing two coats of synthetic enamel paint of approved shade over two coats of primer. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Including painting of legends both direction arrow as per the approval of the Project Manager. GIpipe sleeve of suitable higher size shall be provided wherever the pipes are crossing the walls / floors and sealing the sleeves with glass wool in between & fire sealent compound at either end all as per Project Manager’s requirements including cutting holes and chases in brick, RCC work and making good the same to original conditions complete in all respects.

All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwise and the supply of the same shall also be included in rates under this head. Welding of any kind on the galvanized support / hanger shall not be permitted.

For Sprinkler system - MS `C' Heavy class pipe. Make - Viking/Victaulic/Tyco with the prior approval of engineer-in-charge.

25 mm dia

32 mm dia

40 mm dia

50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

Providing, fixing, testing & commissioning of butterfly valve (PN 20) (suitable for test pressure of 24 kg / sqcm) with flanges, nut bolts, gaskets, painting and necessary pad locking arrangement complete required. Make - Audco or equivalent with the prior approval of engineer-in-charge.

150 mm dia

Providing, fixing, testing & commissioning of brass quartzoid sprinklers (UL approved) of 15 mm dia size, suitable for sustaining the pressure on the seat & water hammer effect. The type & temperature rating shall be as follows :

Pendent /UPRIGHT (68 °C) sprinkler. Make - Viking/Victaulic/Tyco with the prior approval of engineer-in-charge.

Providing, fixing, testing & commissioning of inspectors test assembly complete with test valve, sight glass sectional drain valve, union with corrosion resistant orifice all complete strictly as per drawing. Make - Newage Mumbai/minimax/Monsher with the prior approval of engineer-in-charge.

Providing, fixing, testing & commissioning of dial type (100 mm) pressure gauge with isolation ball valve suitable for working pressure of 250 PSI with no Syphon. Cost shall be inclusive of providing any short pieces, nipples, elbows etc as required. Make - H-Guru/Fibig/Emrald with the prior approval of engineer-in-charge.

Supply, installation, testing and commissioning of electrically operated water flow switches (Vane type) including all accessories, complete required. Make - Viking/Victaulic/Tyco with the prior approval of engineer-in-charge.

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete. Make - Newage Mumbai/Minimax/Safex with the prior approval of engineer-in-charge.

HVAC WORK - N.S. ITEMS :- Supply of Aircooled -Package AC units comprising of the evaporating unit and condensing unit with Scroll compressors. Installation ,Testing and Commissioning of Air -cooled Package AC units with following activities Green Refrigerant Only (R410a)

Lifting shifting and positioning of indoor and out door units at respective locations

Commissioning of AC units with laid down procedures and guidelines by OEM

Capacity 22 TR. Make -Bluestar,Hitachi, Daikin with the prior approval of engineer-in-charge.

Supply & Installation of Hiwall AC for Green Room

2TR for Green Room 5 Star Rating. Make -Bluestar,Hitachi, Daikin with the prior approval of engineer-in-charge.

Supply ,Erection, Testing & Commissioning of GSS Ducting of the following sizes complete in all respects . Make -Bluestar,Hitachi, Daikin with the prior approval of engineer-in-charge.

Supply & application of duct insulation with 9 mm thick nitrile rubber. Make -Bluestar,Hitachi, Daikin with the prior approval of engineer-in-charge.

Supply & application of duct acoustic lining with 25 mm Glasswool covered with Tissue paper and perforated GI/Al sheet. Make -Bluestar,Hitachi, Daikin with the prior approval of engineer-in-charge.

Supply & installation of Aluminiunm powder coated linear/ Sqaure air grills with volume control dampers. Make -Bluestar,Hitachi, Daikin with the prior approval of engineer-in-charge.

Supply & installation of Aluminiunm powder coated linear air grills for return air. Make -Bluestar,Hitachi, Daikin with the prior approval of engineer-in-charge.

Supply & installation of PVC Condensate drain piping for AC units. Make -Bluestar,Hitachi, Daikin with the prior approval of engineer-in-charge.

Supply, Installation & Commissioning of refrigerant copper piping . Make -Bluestar,Hitachi, Daikin with the prior approval of engineer-in-charge.

For package AC

For Hiwall with Insulation

Supply, Installation & Commissionig of control cabling Indoor Unit to Outdoor Unit. Make -Bluestar,Hitachi, Daikin with the prior approval of engineer-in-charge.

Supply, Installation & Commissioning of Canvass.Make -Bluestar,Hitachi, Daikin with the prior approval of engineer-in-charge.

Supply, Installation & Commissioning of M.S for Chowki/Pedestal type Stand For Indoor/ Out Door Unit for Package AC's, Duct support etc Make -Bluestar,Hitachi, Daikin with the prior approval of engineer-in-charge.

Supply and installation of Fresh Air Louver for with Bird Screen Make -Bluestar,Hitachi, Daikin with the prior approval of engineer-in-charge.

Supply and installation of Duct Damper Make -Bluestar,Hitachi, Daikin with the prior approval of engineer-in-charge.

Supply and installation of Fusible Link Fire Damper in Return Air Duct Make -Bluestar,Hitachi, Daikin with the prior approval of engineer-in-charge.

Supply and installation of Room Acoustic for Package AC Room. Make -Bluestar,Hitachi, Daikin with the prior approval of engineer-in-charge.

Bidder Name

Amount

Rajesh Kumar Batra Contractor(GSTN-06AFJPB2634M1ZI)

squirrel Design House(GSTN-NA)

Rajesh Kumar Batra Contractor

squirrel Design House