PROVN OF 01 KITCHEN SHED (SIZE 15X10) OF 17 GRANADIERS (MOT) AND PROVN OF PAVED AREA AT A VEHICLE UNDER AGE (I) POKARAN

Amount

Excavation in trenches n.exc 1.5m deep and n.exc 1.5m wide ,etc. n getting out any type of Soil complete all as specified and directed by Engr-in-Charge.

Returning filling in soil including spreading, levelling and well ramming in layers n.exc 25cm thick in layer etc complete all as specified and directed by Engr-in-Charge.

Surface excavation n.exc 30cm deep and avg 15cm deep and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge.

Removal of excavated surplus soil to a distance n,exc 50m and depositing where complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:3:6 Type C2 (using 40 mm graded stone aggregate) in walls posts (including post and bases complete all as specified and as directed.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed by Engr-in-Charge.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings Fe 410 -W (Gde- E- 250) Grade A complete all as specified and directed by Engr-in-Charge.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engr-in-Charge.

Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile streangth of 550 Mpa as in roof covering\ cladding to wall , fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete type D2,1:4:8 (using 40 mm graded stone aggregate) of thickness 75 mm as in sub base complete all as specified and directed by Engr-in-Charge.

M&L for even spreading of 25mm thick layer of sand cushioning incl watering & consolidation complete all as specified and directed by Engr-in-Charge.

M&L for 60 mm thick machine pressed precast concrete interlocking paver block with grey cement and pigments any shape and size conforming to IS 15658-2006 of M-35 grade complete all as specified and directed by Engr-in-Charge.

M&L for Cement concrete type B-1, 1:2:4 (20mm graded aggregate) of thickness 50 mm as in sub base complete all as specified and directed by Engr-in-Charge.

M&L For Brickwork with fly ash bricks, modular Size bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L rendering 15mm thick in 1:4 cement plaster on of stone masonary surface is to be finished even and smooth complete all as specified and directed by Engr-in-Charge.

M&L for preparation new plastered or unplastered surface and applying two coat of cement base paint over one coat of White wash on walls complete all as specified and directed by Engr-in-Charge.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing & finished the surface even & fair complete all as specified and directed by Engr-in-Charge.

M&L for 60 mm thick machine pressed precast concrete interlocking paver block with grey cement and pigments any shape and size conforming to IS 15658-2006 of M-35 grade including even spreading of 25mm thick layer of sand cushioning incl watering & consolidation complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in copings incl weathering slightly rounded chamfered angles throating including form work complete all as specified and directed by Engr-in-Charge.

M/s Shri Inder Construction Company

rathore construction co.

M/s J B Construction Company

ALPHA ENGINEERING COMPANY