Providing approach pathway from Shiv Temple to Rani Mahal and repairing of approach pathway at entrance of Bayana Fort at Bayana, Dist. Bharatpur

Making the area workable by removing weeds including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Excavation work by manual means in foundation trenches or drains, etc, including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m etc complete as per directions given by Engineer-in-charge.

Demolishing stone rubble masonry pathway manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Providing and laying in position cement concrete below pathway of specified grade excluding the cost of centering and shuttering - All work up to plinth level with 1:3:6 (1 Cement : 3 coarse sand (zone-Ill) derived from natural sources: 6 graded stone aggregate 40 mm nominal size derived from natural sources) etc complete with lead approx. 800 mtr and lift approx. 105mtr to the top of fort and mixing the mortar manually on the top of the fort as per direction given by Engineer-in-charge.

Providing Random rubble masonry for top of pathway with hard stone in foundation and plinth (70% old/collected stone and 30% new stone) including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement: 6 coarse sand) etc complete with lead approx. 800 mtr and lift approx. 105mtr to the top of fort and mixing the mortar manually on the top of the fort as per direction given by Engineer-in-charge.

Providing Flush/ ruled pointing on stone work pathway with cement mortar 1:3 (1 cement : 3 fine sand) as per matching the structures present at site etc complete with lead approx. 800 mtr and lift approx. 105mtr to the top of fort and mixing the mortar manually on the top of the fort as per direction given by Engineer-in-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by manual means with lead approx. 500mtr avg. and lift approx. 20mtr to approved location as approved by Engineer-incharge, beyond 50 m initial lead, for all leads including all lifts involved.