REPAIR TO HARDSTANDING, PATH/PAVEMENT, CULVERT AND DRAIN UNDER AGE B/R-I AT ITARANA CANTT ALWAR

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness as in floors, pavings, aprons, pillars, coloumns, slabs, pathway etc laid dry or laid dry and pointed complete all as specified & directed.

Dismantling of cement concrete (unreinforced) kerb stone and the like of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles.

M&L brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1: 6 complete all as specified.

M&L brick work with old size flyash bricks, straight or curved on plan exc 6 mean radius, built in CM 1:6 complete all as specified.

M&L walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in cement mortar 1:4 complete all as specified & as directed.

Extra over stone walling for hammer dressing to face stone and dressing of face, beds and joints as specified of random rubble walling with maximum depression on face from straight edge held against the dressed surface n.exc 20mm.

Taking down cement or cement lime plaster, any description on brick or stone walls,etc including racking out joints, hacking for key,scrubbing down with water etc, complete all as specified and directed.

M&L rendering 15mm thick in CM 1:4 on brick/stone masonry surfaces or on other than fair faces of brick / stone masonry finished even and smooth without using extra cement complete all as directed.

M&L preparation of newly plastered surface of wall & applying two coats of cement base paint over a coat of primer chalk whiting, complete as specified and directed.

M&L PCC 1:3:6 type C2 using 20 mm graded stone aggregate as in surface channel/drains etc complete all as specified and directed.

Extra for forming fair finished drain or channel exc 30cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc.

M&L providing cement concrete type B1, 1:2:4 (20 mm graded stone aggregate) as in copings complete all as specified.

M&L cement concrete 75mm thick 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified & directed.

Supply only glass dividing strips 3 mm thick and 38 mm width all as specified & directed.

M&L cement concrete 75mm thick 1:2:4, type B-2, (using 40mm graded stone aggregate) as in pathways / hardstanding laid in alternate ways, each panel not exceeding 3.00 sqm finished the surface even and fair without using extra cement complete all as specified & directed.

M&L 20mm thick granite (of any type) tiles machine cut, bedding and jointing with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L 20mm thick granite (of any type) tiles machine cut, in skirting/dado laid over cement plaster and jointing with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with and including 10mm thick rendering in CM 1:4 for receiving stone etc all as specified and as directed

M&L rubber moulded concrete colour tiles with grey cement pigment of size 300mm x 300mm x 22-25 mm thick laid over with and including 20mm thick cement mortar screed in CM 1:6 as in floors pavings etc complete all as specified and directed.

M&L machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60mm thickness, M-35 Grade laid over sand cushing complete all specified and directed. Note :- Sand cushioning will measured and paid seperately.

S&F machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and no pigment laid over sand cushing complete all as specified & directed. Note :- Sand cushioning will measured and paid seperately.

All as per item No 22.00 herein before but except paver blocks (old retrived paver blocks to be re-used).

M&L machine pressed precast conctete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade laid over sand cushing complete all specified and directed. Note :- Sand cushioning will measured and paid seperately.

S&F machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade with grey cement and no pigment laid over sand cushing complete all as specified & directed. Note :- Sand cushioning will measured and paid seperately.

Supply and laying of sand including spreading, levelling and ramming in layers n.exc 25cm thick in each layer complete all as directed

M&L pre-cast (factory casted) cement concrete kerb stone casted in PCC (1:2:4) Type B-1 (using 20mm graded stone aggregate) with plan or interlocking joints (as directed) with solid blocks, exc 10cm in width and setting and jointed in cement mortar 1:6 complete all as specified & directed.

All as per item No 27.00 herein before but except cement concrete Kerb stone (old stone to be re-used) set in CM 1:4.

M&L preparation of kerb stone, new un-treated concrete or plastered surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint in black and white colour over a coat of primer complete all as specified and directed.

M&L preparation of kerb stone,old painted concrete surfaces or plastered surfaces of any description over 10cm girth or width, not otherwise described and applying one coat of synthetic enamel paint in black and white colour complete all as specified and directed.

Roughening the surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified & directed.

M&L cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in surface channel, gap between road & road side kerb stone and the like including finishing the top of benching even and smooth using extra cement complete all as specified & directed.

M&L heavy duty coloured exterior grade tile of size 300mm x 300mm x 10mm thick as in floor, set and jointed in neat cement slurry and pointed in white cement mixed with approved pigment to match the shade of tiles over with and including bedding layer of 15mm thick in CM (1:6) complete all as specified.

M&L 75mm thick PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) in sub base of floor complete all as specified.

M&L chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey pigment cement and pigment laid over with and including 15mm thick screed bed in CM (1:6) complete all as specified.

M&L 75mm thick cement concrete 1:3:6, type C1, (using 20mm thick graded stone aggregate) as in plinth protection laid in alternate bays n.exc 2.5m length finished even & smooth and joint to be filled with Bituminous mastic filling including necessary form work complete all as specified and directed.

Dismantling posts ,purlins, or any part of truss, struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground or wall.

Dismantling asbestos cement corrugated or semi corrugated sheets in roof covering /cladding complete all as specified and directed.

M&L pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, and eves board fixed with self tapping screws as specified.

M&L pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tesile strength of 550 Mpa as in roof/ cladding to wall, fixed with self tapping screws as specified.

S&F steel work in tubular section for purlin/rafters etc including special shaped washer etc. complete using induction butt welded tubes conforming to IS 1161-1998 grade St-240.

M&L rough cast plaster on exterior walls applying the under coat of cement and sand mortar 1:3 not less than 10mm thick and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm) mixed with coarse aggregate, sand and cement in the ratio of 1:1:1 shall be applied and finished even.The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position (reinforcement cut as required to facilitate demolition) all as specified & as directed.

S&F 75mm thick steel fibre reinforced concrete (SFRC) manhole cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard minimum load bearing capacity 5 ton /Sqm in square rectangular or circular shape complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed.

M&L 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) as under floor tiles finished the surface even and fair complete all as specified and as directed.

M&L coloured joint free non skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm, in floors etc with and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L coloured joint free virified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36sqm, in floors etc with and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L machine cut kota stone slab flooring 20-25 mm thick over cement slurry base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab laid over with and including 15mm thick screed bed in CM 1:6 including rubbing and polishing complete all as specified and as directed.

M&L kota stone slab 10-15 mm thick in riser step, skirting, dado etc complete all as specified and as directed .

M&L glazed ceramic tiles (coloured) in vertical surface 350mm x 250mm x 7mm / 450mm x 350mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M&L 10mm thick cement plaster in CM 1:4 on other than fair faces of brick work or stone surfaces of walls to receive tiles etc complete all as specified and directed.

Excavating in post holes (or similar) each n. exc 0.5 cum getting out returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm as in soft/loose soil.

M&L cement concrete type C-2, 1:3:6 ( 40mm graded stone aggregate) in foundation, filling, mass concrete for post holes etc complete all as specified and directed.

Dismantling fencing of wire mesh any type complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F mild steel joist angle channel or tee sections and fix independently in concrete as fencing posts and similar work confirming to Fe 410 or Fe 310-0 complete all as specified and directed.

S&F mild steel bolt purpose made with hexagonal or square head one end screwed the other end or screwed both ends each screwed to be fitted with washer and one hexagonal or square nuts exceeding 50mm and n exc 75mm long dia of the shank 16 mm complete all as specified and directed.

Fixing only chain link fencing including line wire any mesh size and type to any type of standards rails, straining bolts etc inlcluding provision of binding wire complete all as specified and directed.

Supply only chain link MS galvanised fencing any size or complete all as specified and directed.

S&F mild steel MS round bar 10 mm dia and over cut to length bent to shape required including cranking bending hooking etc and binding with MS wire 0.9 mm dia (annealed) as in straightening bars of fencing complete all as specified and directed.

S&F in repair galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed.

M&L preparation to new or previously untreated steel surface of any description,over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chromate primer complete all as specified and directed.

M&L preparation of new steel surfaces of any description n.exc 10cm in width or girth when unconnected and applying two coats of synthetic enamal paint over a coat of red oxide, zinc chromate primer complete all as specified and directed.

M/S GAURI CONSTRUCTION

shiva construction

Radha Enterprises

J.J.ENGINEERING

M/s S Amarjit Singh