SPECIAL REPAIR TO BLDG NO-16 (BQM CLOTHING STORE), BLDG NO P-156 AND CONVEY GROUND AT MIL STN KALKA UNDER GE (I) JUTOGH

Amount

Taking down of cement plaster on walls of any description incl raking out of joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) on brick or concrete surfaces finished even and smooth without using extra cement complete for internal surface complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 finished even and fair without using extra cement complete all as specified and directed.

M&L for Rendering 5 mm thick on brick/concrete surfaces in CM 1:3 on ceiling and finishing the surface even and fair, complete all as specified and directed.

M & L for preparing newly plastered wall surfaces and applying two coat of distemper oil emulsion over a coat of suitable primer for OBD, complete all as specified and directed.

M&L for complete removal of existing treatment from wall and applying two coats of oil bound distemper over a layer of wall care putty 3mm thick with a coat of primer suitable for oil bound distemper incl preparation of surface complete all as per specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of cement base paint over primer on walls complete all as specified and directed.

M& L for Preparing new plastered surfaces of ceiling and applying three coat of white wash on ceiling complete all as specified and directed.

M&L for preparation of old plastered ceiling surfaces and applying two coat of white wash on ceiling complete all as specified and directed.

M&L for Preparing new plastered surfaces of wall and applying three coat of white wash on wall complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying two coat of white wash on wall complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

Demolition of reinforced Concrete of roofs, floors (other than ground floors) beams, staircases, landing, chhajas and similar suspended work complete all as specified and directed.

Use and waste of form work to chajjas and similar work for fair finish surfaces complete all as specified and directed.

M&L for RCC 1:1.5:3, type A-1, using 20mm graded mechanically crushed stone aggregate as in chajjas/Shelves etc complete all as specified and directed.

M&L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate finished even & smooth w/o using extra cement 75 mm thick as in plinth protection complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 17-22mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Glazed ceramic coloured tile of approved shade and pattern on vertical surface such as skirting/ dado etc. 350X250X7mm/450X300X7mm thick, set and jointed in neat cement slurry over 10mm thick backing coat plaster in CM (1:4) and pointed in white or coloured cement to match to coloured of tiles, complete all as specified and directed.

M&L for 75mm PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.

M&L for chequered cement concrete tiles 300x300x25mm thick with grey pigment cement, set, jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

Demolition of brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed..

Taking down chowkhats or frames with shutter not exc 1.5 sqm (without taking off shutters from frames) and removing from site complete all as specified and directed.

Taking down chowkhats or frames with shutter exc 1.5 sqm but n.exc 4.0 sqm (without taking off shutters from frames) and removing from site complete all as specified and directed.

S&F 35mm thick factory made 2nd class hard wood rail and style plain framed, paneled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS- 1003 (part -I) kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F 35 mm thick glazed & Skelton shutter of 2nd class hard wood open rebated & prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitered beads for securing glass/wire mesh etc size of members of shutters as SSR Part-I (2010),section 8,clause 8.24 (a) complete all as specified and directed.

S&F pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door and window frames with double rebate including lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fasts/lugs with a coat of coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

M&L for PCC 1:3:6, type C-1, 20mm graded crushed stone aggregate as in filling back of pressed steel chowkhats complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat molded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.

S&F stainless steel tower bolt of extruded section, 200mm length of bolt and fixed with screws, complete all as specified and directed.

S&F 100mm butt hinges, stainless steel with galvanized mild steel hinge pin, anodised and fixed type complete all as specified and directed.

S&F 125mm size, stainless steel anodized, handle and fixed with screws complete all as specified and directed.

S&F Steel windows of profile rectangular tube section with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F Steel windows of profile rectangular tube section with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows or ventilators, fixed/openable type, with glazing bars complete all as specified and directed.

S& F 3 mm thick sheet glass plain ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia or wire and average width or aperture 1.40mm and fixed with stainless steel wire staple in complete all as specified and directed.

Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed.

M&L for preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint incl one coat of red oxide complete all as specified and directed.

M&L for preparation of old steel/wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L 10mm dia & over TMT bars cut to length bent to shape required, including cranking, bending spirally or hooking for columns and binding with M.S wire annealed not less than 0.9 mm dia or securing with clips quality confirmining complete all as specified and directed.

All as per Srl item No 46.00 above but for 6 to 8mm dia etc complete all as specified and directed.

S&F in Vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including P or S trap, complete all as specified and directed.

S&F vitreous China squatting pan of “Orissa Pattern” of size 580x440mm white with integral footrest complete including making good floors complete all as specified and directed.

S&F 10 ltr capacity PVC valve less, symphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 32 mm dia flush pipe, complete all as specified and directed.

S&F PTMT jet spray with 1.00 meter PVC tube, (suitable for European seat) complete all as specified and directed.

Taking down wash hand basins and fixing at new or old place including cutting, pinning in end of brackets or erecting stand, waste pipe complete all as specified and directed.

S&F brass CP WHB Mixer valve for mixing hot and Cold water screwed down for 15mm dia iron pipe complete all as specified and directed.

S&F in repair 15 mm fancy type chromium plated fancy type bib tap brass long body with flange screwed down high pressure CP cast copper alloy with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified and directed.

S&F fancy type, chromium plated Stop valves, of 15 mm bore cast Copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.

S&F in repair fancy type shower rose 30cm long CP brass pipe with swivel joint, complete all as specified and directed.

S&F Soap dish PTMT , fixed to plugs with chromium plated brass screws, complete all as specified and directed.

S & F chromium plated, towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F for PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed.

M&L for PVC (SWR) gully trap 125/110mm mouthed, type "p" setting and jointing to drains with CM 1:1 complete all as specified and directed.

Taking up or down steel tubing and connections of 15mm bore in pipe, including cleaning for re-fixing or removal from site complete all as specified and directed.

Taking up or down steel tubing and connections of 20mm bore in pipe, including cleaning for re-fixing or removal from site complete all as specified and directed.

S&F GI tubing medium grade 15mm dia incl fittings, cutting threading and fixing to walls or fixing in concealed walls or in floors etc, and making good the surfaces matching to existing surfaces of walls/ floor, complete all as specified and directed.

Re-fixing old steel tubing 15 mm dia bore in open / connections in new or old positions, complete all as specified and directed.

S&F GI tubing medium grade 20mm dia incl fittings, cutting threading and fixing to walls or fixing in concealed walls or in floors etc, and making good the surfaces matching to existing surfaces of walls/ floor complete all as specified and directed .

Re-fixing old steel tubing 20 mm dia bore in open/c/connections in new or old positions, complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe single socket, in any length with rubber ring joint, laid in trenches or in floor complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipe single socket, in any length with rubber ring joint, laid in trenches or in floor complete all as specified and directed.

S&F PVC bend (any radius) of 100 mm bore complete all as specified and directed.

S&F PVC bend (any radius) of 75 mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm dia, complete all as specified and directed.

S & F PVC (SWR) junction single, (Single T 110mm), equal or unequal with access door complete all as specified and directed.

S&F 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

S&F PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F Stainless steel tubing of 25 mm dia chromium plated min 1.0 mm wall thickness as in curtain rod complete incl fixing of brackets, Knob fancy type fixed with stainless steel screws etc fixed in repair complete all as specified and directed.

Dismantling Wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F GI frame work for ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 & 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having curled web of 50mm and flange of 26mm each with lips of 10.50mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre. size of grid 605mmx605mm complete all as specified and directed.

S&F Hangers 6mm dia GI (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M&L for 4mm thick non asbestos fiber cement building boards white/off white (E board designer) fixed or laid /inserted to timber/GI/Aluminium frame work with screws in ceiling flat or sloping, complete all as specified and directed.

M&L for Machine cut Kota stone slab flooring 18-20 mm thick over cement screed bed lad and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15mm thick screed bed in CM 1:6 complete including taking out existing kota stone slab in floor etc., complete all as specified and directed.

M&L for joint filling of existing Kota stone slab flooring including rubbing and polishing etc complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated, etc) sheet in roof coverings, complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for truss/ purlin/ rafter, complete all as specified and directed.

S&F Fe-410-W(Gde-E-250) quality-B for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., complete all as specified and directed.

Fixing only of dismantled roof truss (framed) trussed, purlins, rafter etc including necessary welding etc complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar (1:6) on brick or concrete surfaces finished even and fair without using extra cement complete for internal surface including taking down old plaster, complete all as specified and directed.

M&L for Brick work with sub class‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges , steel peg stay, complete all as specified and directed.

S&F stainless steel 0.36mm nominal dia or wire and average width or aperture 1.18mm and fixed with stainless steel wire staple, complete all as specified and directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 290 Gde E-165, complete all as specified and directed.

S&F 100 mm long medium weight stainless steel but hinges, complete all as specified and directed.

S&F 150 mm long stainless steel handle, complete all as specified and directed.

S&F 200mm long stainless steel barrel tower bolts complete all as specified and directed.

S&F 300 mm long stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, stainless steel and fixing bolt and sliding bolt, complete all as specified and directed.

S&F floor 150 mm long floor door stopper of stanless steel body and tongue with hard drawn steel spring complete all as specified and directed.

S&F 300mm, mild steel pre painted ordinary door springs including roller and roller plate complete all as specified and directed.

S&F butt hinges stainless steel of 50mm size complete all as specified and directed.

S & F IInd class HW Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu cm each, complete all as specified and directed.

Removing demolished/excavated material /soil .n exc 50m depositing were directed at a level n.exc 1.5m above the starting point, complete all as specified and directed.

M&L for cement concrete work in pavement/ hard-standing of flexural strength 40kg/per square centimeter in field using 400 kg of cement per cubic meter, thickness of concrete 25 cm or less, complete all as specified and directed

M&L for 100 MM thick PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness M-50 Grade with grey cement and pigment set over 25mm thick sand cushioning, complete all as specified and directed.

M&L for forming 12mm thick expansion joints of 150mm thick filled with pre-formed bituminous filler top 30mm primed and sealed with sealing compound, grade 'A', complete all as specified and directed.

Taking down carefully point wiring from existing place (light/fan, socket or power points complete) with all fittings such as switches, sockets, ceiling rose , pendant holder, fitting and fixtures , MCB, Main switches, call bell etc and making good to disturbed surface to wall ,floor etc to match with existing surface either by using same colour distemper or white colour wash, complete all as specified and directed.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS-H) and unsheathed size 1.5 sqmm with concealed Conduit with fixing accessories, to be fixed , for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet incl continuous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly, colour code of wires as per specification, complete all as specified and directed.

All as per Srl item No 108.00 above but for one 3/5 pin socket 5 Amp on same board, with 1.5 sqmm wire with 1.5 sqmm earth wire complete all as specified and directed.

All as per Srl item No 108.00 above but for one 3/5 pin socket 5 Amp on independent board, with 1.5 sqmm wire with 1.5 sqmm earth wire complete all as specified and directed.

One 3 pin 15 Amp socket independent but with 2.5 q mm PVC insulated unsheathed copper stranded conductor and earth wire with 2.5 Sqmm

S & F switch piano type 240 V, 5 Amp , Sp one way flush type complete all as specified and directed.

S&F socket 5 pins, 6 Amp, flush type piano (multi purpose), complete all as specified and directed.

S&F Socket 15 Amps flush type 230 Volts , AC, complete all as specified and directed.

S&F switch 15 Amps flush type 230 Volts , AC, complete all as specified and directed.

M&L for regulator Electronic type 240 Volt single phase suitable for ceiling fan step type, complete all as specified and directed.

S&F ceiling rose surface backelite, 65 x 20 mm three terminal complete all as specified and directed.

S&F for lamp holder pvc body with back plate complete with 9 Watt LED lamp complete all as specified and directed.

S&F in replacement of sheet metal enclosure for MCB DB TPN double door, 4 way complete with 200 Amps rated Bus bar complete all as specified and directed.

S&F in replacement sheet metal enclosures for MCB distribution board SPN 8 way double door type with 200 amp rated bus bar and suitable for SPN MCB as incomer complete all as specified and directed.

S&F MCB SPN 32 Amps 240 V 10 KA B curve incl all terminals, fitting etc., complete all as specified and directed.

S&F MCB SP 6- 32 Amps 240 V 10 KA B curve incl all terminals, fitting etc., complete all as specified and directed.

S&F MCB TPN 32 Amps 415V 10 KA B Curve incl all terminals, fitting etc., complete all as specified and directed.

M&L for sub main wiring with two runs of single core 6 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS cable drawn and PVC rigid conduit 20 mm dia with all necessary fittings and accessories and one run of PVC insulated and unsheathed single core cable with copper conductor of size 6 Sqmm as earth wire (green in colour ) run through PVC rigid conduit and connected to common earth dolly , including taking out the old sub main wiring complete all as specified and directed. Note. Two run of cable and one run of PVC conduit and one run of earth continuity wire shall be measured as one run complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanized iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified including all earth work excavation, returning filling and disposal of surplus soil and testing on completion all as specified and directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S & F in repairs LED tube light along with fixture, 20W(4 feet) wall mounted LED batten, extruded PVC, heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete all as specified and directed.

Excavation in trenches in soft/loose soil n.exc 1.5 Mtr deep and n.exc 1.5 mtr wide for laying of HT cable and getting out including dressing/trimming of sides and leveling, grading and ramming of bottom of excavation complete all as specified and as directed.

Returning, filling, including leveling , watering and well ramming excavated soil in layers n.exc 25cm thick in trenches after cable have been laid complete all as specified and as directed.

Supply, Fixing or Passing through pipe, XLPE insulated, Armored, Electric power UG cable (Heavy duty) with aluminium conductor, 1100 volts grade, nominal cross sectional area 16 sqmm 4 core including Brass compression cable gland, terminal lug etc and testing complete all as specified and directed.

M&L for sub class 'B' old size of Brick in trenches for cable protection of LT Cables complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation for UG cable complete all as specified and directed.

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and directed.

S.R.SHARMA & SONS

JASWANT SINGH ANAND

Neelkanth Engineers

R. P. Suppliers and Construction Co.