PROVN OF UG SUMP AND PUMP AT ICGAS RATNAGIRI AND WATER SUPPLY PIPELINE WITH SPRINKLERS FOR GARDEN AREAS AT ICGS RATNAGIRI

Amount

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/disintegrated rock complete all as specified.

Excavating over areas not exceeding 1.5m deep and getting out soft/disintegrated rock complete all as specified.

Excavating over areas exceeding 1.5m deep and getting out soft/disintegrated rock complete all as specified.

Removing excavated material or rock exceeding 250 m but not exceeding 500 m and depositing where directed.

M&L for broken stones and boulders hardcore of gauge not exceeding 63 mm, deposited,spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified.

Sand filling under floors or in foundations including watering and consolidation complete all as specified.

Returning, filling in, including spreading, levelling watering and well ramming in layers not exceeding 25cm using soft/ disintegrated rock complete all as specified.

M&L for 100 mm thick PCC 1:3:6 type C2 ( 40 mm graded aggregate ) as in sub base complete all as specified.

M&L supply Machine pressed precast concrete interlocking paver block with Grey cement and pigment of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified.

M&L Cement concrete type C2 1:3:6 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified.

M&L RCC (design mix) M30 (20mm graded aggregates) in foundation, including rafts, footing, foundation beams, plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concrete complete all as specified.

M&L RCC (design mix) M30 (20mm graded aggregates) in walls,basement walls, retaining walls, ballast walls and the like any thickness; above top of footing; including attached pilasters and buttresses complete all as specified.

M&L RCC (design mix) M30 (20mm graded aggregates) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

M&L TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securing with clips complete all as specified.

M&L TMT bars 8mm dia and over cut to length, bent to shape required, incl cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securing with clips complete all as specified.

M&L Formwork of to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work for curved rough finish surface vertical or to batter complete all as specified.

M&L Formwork of to sides of concrete to faces of walls, retaining walls, abutments, parapets and staircase railing and similar works including attached pilasters, butresses etc. for curved rough finish surface vertical or to batter complete all as specified.

M&L Formwork of to sides of concrete to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick rough finished flat for curved rough finish surfaces of concrete complete all as specified.

S&F PVC (SWR) pipes 110 mm bore dia single socketed in any length with rubber ring joints fixed to walls complete all as specified.

S&F PVC (SWR) vent pipes 150 mm bore dia. single socketed in any length with rubber joints fixed to walls complete all as specified.

S&F PVC (SWR) bends any radius 110mm bore dia. complete all as specified.

M&L for applying water proofing solution of 1-2 mm thick complete all as specified.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc or for shafts, wells, cesspits,manholes,pier holes,etc not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft/disintigrated rock for cable, pipe etc. complete all as specified.

Removing excavated material soft/disintigrated rock to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

M&L for sand cushioning with layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches after the cable has been tested complete all as specified and directed by Engr-in-Charge.

M&L supply and laying reinforced precast concrete cable cover,class LV,Type I,flat size 250 mmx 150 mm x 40 mm.after laying of cable in trenches after the cable has been tested complete all as specified and directed by Engr-in-Charge.

Supply laying & testing cable XLPE insulated, screened,PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size16 sq mm 2 core complete all specified and directed by Engr-in-Charge.

Supply and laying cable XLPE insulated screened PVC bedded galvanised steeel strip or wire armoured electric power cable (heavy duty) 1100 Volts grade with straded aluminium conductor of size 10 sq mm 4 core complete all specified and directed by Engr-in-Charge.

Supply and lay pipe galvanized, “Medium class”, including fittings 15 mm dia. complete all as specified.

S&F Galvanised steel tubes Medium grade bore of pipe in mm 50 mm with all fitting laid in trenches complete all specified and directed by Engr-in-Charge.

S&FGalvanised steel tubes Medium grade bore of pipe in mm 40 mm with all fitting laid in trenches complete all specified and directed by Engr-in-Charge.

S&FGalvanised steel tubes Medium grade bore of pipe in mm 25 mm with all fitting laid in trenches complete all specified and directed by Engr-in-Charge.

S&F Gun-metal globe or gate valves with iron wheel head ,screwed both ends for iron pipe and fixed size 50mm with all fitting laid in trenches complete all specified and directed by Engr-in-Charge.

S&F Gun-metal globe or gate valves with iron wheel head ,screwed both ends for iron pipe and fixed size 40mm with all fitting laid in trenches complete all specified and directed by Engr-in-Charge.

S&F Gun-metal globe or gate valves with iron wheel head ,screwed both ends for iron pipe and fixed size 25mm with all fitting laid in trenches complete all specified and directed by Engr-in-Charge.

Supply, installation, testing and commisioning of Single Phase Deep well jet pump of capacity 1.5 HP, inlet/ outlet 50x40 mm dia. with all fitting complete all specified and directed by Engr-in-Charge. Make : Kirloskar pump KJ-15V/4T6, or equivalent in Crompton Greaves,etc.

Supply install and testing of monoblock pump set of cap 3 HP 3 phase suitalbe for suction /delivery pipe 50/40mm including foundation MS iron frame complete grouting with nut bolts all as specified as directed. Make: Crompton model MBK 32 LF or equivalent in Kirloskar/Havels/KSB,etc.

supply and fix starter DOL suitable for 3 HP three phase motor complete all as specified. Make : Crompton/Kirloskar/ Siemens/ L&T etc.

Supply, install, test and commission LT feeder piler box outdoor type CPRI approved , 1 phase, 2wire, 220 volts with 50 Amps Aluminium bus bar, indicator lamps volt meter amp meter, outdoor cubical type, IP 54, dust and vermin proof fabricated out of CRCA sheet not less than 2 mm thick fixed on angle iron frame of size 50x50x6mm duly powder coated, front openable signal door hinged with locking arrangements complete with and comprising the following including necessary PCC platform of suitable size:- a) Intelegent meter b) Indicator lamp c) MCB DP 20 A, 25 KA, Thermal release (Incommer)=01 Nos d) Stater DOL 1.5 HP single phase motor =2Nos complete all as specified.

Supply and fixed 15mm diameter bore pipe stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified.

Supply and fixing sprinkler of brass crominium coated suitable to spread water min upto 2.5 mtr both side all as specified.

M&L for construction of stone masonry valve pit size of 90 x 90 x90 cm (internal dimesion) complete with 40 x 40 x6 mm MS angle iron frame, 3mm thick MS Top cover with locking arrangement including two coat of black bitumionous paint over a coat of red oxide, zinc cromide primer on steel surface all as specified and directed.

Cutting/demolition laid dry or laid dry and pointed of Road/stone slab/tile any discription any thickness etc all as specified.

M&L PCC type D2 1:2:4 ( 40 mm graded aggregate ) in foundation, filling and mass concrete complete all as specified.

m/s Pravin s Bhosale