Removing Old Asbestos Sheet Providing Fixing GI Sheet Roofing in Tyre Plant as well as the Repair of Ticket Roll Store Roofs RHS at PRTC Head Office Patiala

Removing Old Asbestos Sheet & Providing/ Fixing GI Sheet Roofing in Tyre Plant:- Stripping and stacking iron sheets of a roof including ridging, flashing, eaves boards gutters and down pipes complete as per PWD specification to the entire satisfaction of E.I.C.

Providing and fixing ( PPGL) precoated painted galvalume sheet roofing (size, shape and pitch of corrugation as approved by Engineer-in-charge) The end rib shall have anti cappillary groove and return leg. The steel sheet must be having yield strength of 550 MPa ( Fy= 550 MPa) metallic coated with Zinc- Aluminium alloy ( i.e. 55% Al, 43.4%Zinc, 1.6% Si-Zincalume) AZ150 ( Min. 150 bm/mm2 total on both sides), pre painted with super Durable Polyster XRW quality paint includes inorganic infrared reflective pigment. The sheet confirms to general requirement of AS/NZS 2728 type 4/ IS 15965 class 3 durability and gloss value of 25% -40%. should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete as per PWD specification to the entire satisfaction of E.I.C. 0.60 mm (+ 0.05 %) thick

Providing and fixing Gutter 250mm wide with PPGL 0.50 thick (TCT) manufactured from zinc P/aluminium alloy coated high tensile steel, having minimum yield strength of 550 MPa of approved colour fixed by means of self-drilling screws limped washers as per the manufactures guidelines complete in all respect and to the entire satisfaction of engineer in charge.

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete as per drawings, specifications and tothe entire satisfaction of engineer-in- charge.

Finishing walls with cement based water double exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade complete as per drawings, specifications and tothe entire satisfaction of engineer-in- charge.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade complete as per drawings, specifications and tothe entire satisfaction of engineer-in- charge.

Supply and Erection of Air Circulator fan 600mm Heavy Duty wall mount including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site.

Supply and Erection of Heavy duty Exhaust Fans 300mm 900RPM with aluminium louver shutter Canon of double ball bearing longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site.

Supply and Erection of LED Flood Light 120watt (including LED driver) with pressure die cast aluminium housing with control gear ( with IP 65/ IP 66 protection), CRI Minimum 70, CCT >5700K, toughened glass fitting, LED fixture minimum 120 lumens per watt and operating voltage between 140 to 270 volt, THD <10% ingress protection (as per BIS standards) , surge protection 10kv and above (as per (IS/IEC standards) wattage of each LED High power LED of 1 watt to 5 watt with mandatory modular lenses, input AC frequency 50 Hz ± 3 % 5 year warranty including their drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter no AT-2021/GL 1410-1422 Dated 06/05/2021. Dated 06/05/2021. Besides this the lighting fixture manufactures should have in house NABL accredited labortary.

Repair of Ticket Roll Store Roofs (RHS):- First class brick work laid in cement, lime sand mortar 1:3:12 (one cement, three lime and Twelve sand) in first storey (upto 4 metres height) above plinth level complete as per PWD specification to the entire satisfaction of E.I.C.

Cement pointing 1:2 flush on flat brick flooring complete as per PWD specification to the entire satisfaction of E.I.C.

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified complete as per PWD specification to the entire satisfaction of E.I.C.

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified complete as per PWD specification to the entire satisfaction of E.I.C.

Regrading terracing of mud plaster covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud plaster to proper, slope, relaying mud plaster Gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement and 3 fine sand) including replacing unserviceable tiles, or bricks with new over and disposal of unserviceable material to the dumping ground within 50 m lead (The cost of new tiles or bricks excluded). complete as per PWD specification to the entire satisfaction of E.I.C.

Supply of New Tiles

Please Enable Macros to View BoQ information