SPECIAL REPAIRS TO MAG NO 15 AT MIL STN DAPPAR UNDER GE (P) DAPPAR

Amount

Schedule 'A'Section-I (Building Works)

Total amount of Sch 'A' Sec I (Building Works)

Schedule 'A'Section-II (INTERNAL ELECTRIFICATION WORKS)

Total amount of Sch 'A' Sec II (Internal Electrification Works)

Schedule 'A'Section-III (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

Supply only integral liquid water proofing compound complete all as specified & as directed by Engineer-in-Charge.

M&L for applying acrylic thick wall care putty on internal/external surfaces of walls/ceilings/soffits (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

Applying 02 coats of interior emulsion paint fire proof (light Shade) @ 10 sq.m/litre/2 coats by using roller/brush to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion complete all as specified and directed.

Applying 02 coats of interior emulsion paint fire proof (white Shade) @ 10 sq.m/litre/2 coats by using roller/brush to ceiling surfaces over & including a coat of interior primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion complete all as specified and directed.

Bringing approved earth from oput side MOD land and depositing where directed at al level from embankment including raising or lowering earth, spreading in layers n.exc 30 cm thick, watering, ramming / rolling and finishing to required shape, size etc n.exc 6 mtr high from base complete all as specified and directed by Engineer in Charge. Note : 1. The height of earth to be compacted / levelled will varing from 0 to 10 metre. 2. Returning filling and levelling to be done upto maximum thickness 250 mm in each layer. 3. The compaction test to be carried out at every layer according to IS-2720 (Pt-7)-1980 under Optimum Moisture Condition so as to obtain atleast 95% of standard proctor density for each layer. 4. After satisfaction of completion test the next layer will be allowed for levelling.

Taking down MS steel doors of any size and shape and repairing the same as required at site with welding including steel member if required and applying one coat of red oxide primer and refising in the same opening complete all as specified and directed by Engineer in Charge.

Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats in camouflage pattern by using roller/brush to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion complete all as specified and directed.

M&L for flame proof wiring with single core PVC insulated and unsheathed 1100 volt grade (FRLSH) electric cable with multi stranded copper conductor of size 2.5 Sqmm phase and neutral drawn in and including ERW rigid steel stove anamelled black conduit heavy duty ISI marked of size 20mm dia concealed type including all flame proof conduct fitting and accessories such as tees, junction boxes, bends duly tested by CMRI Dhanbad suitable for Four light controlled by one flame proof rotary switch SP one way and including drawing continous earth wire PVC insulated unsheathed 1100 v grade cable with stranded copper conductor of size 2.5 Sqmm and connected to earth dolly complete conforming to IS-694 all as specified and directed by Engineer in Charge.

M&L for flame proof wiring with single core PVC insulated and unsheathed 1100 volt grade (FRLSH) electric cable with multi stranded copper conductor of size 2.5 Sqmm phase and neutral drawn in and including ERW rigid steel stove anamelled black conduit heavy duty ISI marked of size 20mm dia concealed type including all flame proof conduct fitting and accessories such as tees, junction boxes, bends duly tested by CMRI Dhanbad suitable for two light controlled by one flame proof rotary switch SP one way and including drawing continous earth wire PVC insulated unsheathed 1100 v grade cable with stranded copper conductor of size 2.5 Sqmm and connected to earth dolly complete conforming to IS-694 all as specified and directed by Engineer in Charge.

S&F in replacement of totally enclosed flame proof / weather proof LED fixture 2 x 20 complete watts 1200mm with aluminium extruded and aluminium heat sink, flat heat resistant clear toughened glass 'Type 'A', stainless steel hardware, System Lumen Efficiency > 100 Lm/W opoerating voltage between 140-270 Vac, Power factor more than 0.90%, LED Driving Current < 70% of rated maximum forward current, THD less than 20%, CRI more than 80%, Luminaire integral driver with 2KV surge protection, Over load Protection, No load Protection and BIS Marking (R No. for Driver), Driver Certification IEC64347-2-13 IS(15885), over all electrical efficiency more than 90%, Driver electrical efficiency will be > 85%, with cable glands & dummy plugs, with 2 year warranty all as specified and directed by Engineer in Charge.

S&F 70W LED Flood Light with System Lumen Efficiency > 100Lm/W operating voltage between 140 - 270Vac, Driver will have cut off at >300 Vac, Power factor more than 0.95%, LED CCT 5665+ 355K as per ANSI BIN LED Driving Current < 70% of rated maximum forward current, Luminaire integral driver with 5KV surge protection, Over load Protection, No load Protection and BIS Marking (R no. for Driver), Driver Certification IEC64347-2-13 IS(15885), Driver should be concealed under IP66, over all electrical efficiency more than 90%, Driver electrical efficiency will be > 85% connecting with PVC copper cable of size 3 x 1 sqmm as per IS 10322 at least 2 year on site warranty without any condition including taking down of old light fitting safely and removing from site complete all as specified and directed by Engineer in Charge.

S&F Flame proof 12 way distribution board for mounting MCBs/RCBO's ELCB etc as per IS specification and CMRI approved of factory made fabricated out of cast aluminium aloy LM-06 gray appoxy powder coated finish, fitted with DIN Channel neutral link, Earth links and 200 Amps rated bus bar. The DB shall be having with IP-65 protection. The DBs shall also be consisting and including the following:- (a) TPN 415 volts AC 50 Hz 40 Amps - 01 No. (b) MCB Single pole 240 volts AC 50 Hz 10 Amps - 10 Nos

S & F flame proof flexible metalic house conduit 20mm dia all as specified and directed by Engineer in Charge.

NAVREET CONSTRUCTION

Swami Enterprises